Desupport Notice for Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit

Hello,
Is there a comprehensive published note from Oracle describing desupport notices for Oracle databases?
Mainly - Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production, 10g r2 and 11g r1?
If so, can anyone provide the link? I do have Metalink access, so a note id would also be good.
Thanks,
R

Hi,
Please see these docs.
ALERT: Oracle9i Release 2 (9.2) Support Status and Alerts [ID 189908.1]
ALERT: Oracle 10g Release 1 (10.1) Support Status and Alerts [ID 263719.1]
ALERT: Oracle 10g Release 2 (10.2) Support Status and Alerts [ID 316900.1]
ALERT: Oracle 11g Release 1 (11.1) Support Status and Alerts [ID 454507.1]
Thanks,
Hussein

Similar Messages

A known issue Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit

Hi, In our java web application we have been seeing an issue for last few months. The sequence is as follows :
1. we create a record in a table.
2. at a later point we check through select query if this record is present via app using OCI driver version 9.2.8.0.
3. intermittently (once in 2 weeks) we see this select query returns zero records instead of expected 1.
4. in such cases we wait for 10ms and retry on the same connection and we successfully get hold of this record.
We have upgraded the driver from a lower version (guess it was 9.2.7.0) but no success. Using the retry logic was our suspicion as we couldn't find any fault within application. Anybody who has seen/heard about a similar issue ? or any suggetions ?

You should search for possible Oracle bugs on My Oracle Support using "wrong result" as keyword. If you are lucky you can find an interim patch. If you are not lucky you should consider upgrading to Oracle 11g (or at least to Oracle 10g). Anyway you should really consider upgrading your database because Oracle 9i is no more fully supported.
Edited by: P. Forstmann on 14 sept. 2010 13:34

Oracle9i Enterprise Edition Release 9.2.0.7 downloadable

Hi,
Please let me know where i can i find the downloadable for :Oracle9i Enterprise Edition Release 9.2.0.7 for linux
Thank you,
-Lokanath.

Installation package could be downloaded here: http://www.oracle.com/technology/software/products/oracle9i/index.html (only 9.2.0.4 is downloadable).
Then you need download 9.2.0.7 patchset from metalink.oracle.com (you must have paid support for access to this site)

Can Apex 4 be installed on Oracle9i Enterprise Edition Release 9.2.0.8.0 -

Hi,
Just wondering if its possible to installe Apex 4 on Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
Thanks
Aali
Edited by: aali on 29-Jun-2010 03:14

No. See requirements in Installation Guide:
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/pre_require.htm#BABFCFBC
Thiis is not difficult.

Database Hung problem in Oracle9i Enterprise Edition Release 9.2.0.7.0

Hello,
I am using the Oracle9i Enterprise Edition Release 9.2.0.7.0. Our database suddenly get hung and we need to give a Hard reset.
Following are errors are in listener log.
TNS-12571: TNS:packet writer failure
27-OCT-2008 00:33:00 * service_died * nm45 * 12571
TNS-12571: TNS:packet writer failure
27-OCT-2008 00:33:13 * CONNECT_DATA=(SERVICE_NAME=<Service>)(SID=NM45)(SDU=2048)(CID=(PROGRAM=<EXE>)(HOST=<Host>(USER=<User>))) * (ADDRESS=(PROTOCOL=tcp)(HOST=<IP>)(PORT=<Port>)) * establish * <DB> * 12560
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown error
Error in Oracle trace:
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 30
Windows thread id: 1172, image: ORACLE.EXE
*** 2008-10-27 00:54:04.300
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:14:38.175
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:22:48.894
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:39:21.800
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:50:40.910
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 02:39:51.285
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
What could be the reason.
Regards
Hemant

Hello Hemant,
Thanks for the response. Following error are in sqlnet.log. We are using the static id.
Fatal NI connect error 12560, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 9.2.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 9.2.0.7.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 9.2.0.7.0 - Production
Time: 27-OCT-2008 00:33:13
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Regards
Hemant.

Oracle9i Enterprise Edition Release 9.2.0.1.0 - OracleSessionStateStore

Hi,
I have the Oracle9i Enterprise Edition Release 9.2.0.1.0 version of Oracle DB installed.
The client is an ASP.net 3.5 AJAX enabled web application using IIS (Developer m/c is XP SP3 with IIS 5.0 installed).
I am trying to use the Oracle Provider for .NET for storing ASP.net sessions in Oracle Database.
The ODP version that i have installed to the GAC and am using is : 11.1.0.7.20
However, once i turn it on via web.config, i get the following error:-
Unhandled Execution Error
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
Exception Details: Oracle.DataAccess.Client.OracleException:
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OracleException (0x80004005)]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck) +2657
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) +80
Oracle.DataAccess.Types.OracleBlob.get_Length() +609
Oracle.DataAccess.Types.OracleBlob.get_Value() +476
Oracle.Web.SessionState.OracleSessionStateStore.GetSessionStoreItem(HttpContext context, String id, Boolean getExclusive, Boolean& locked, TimeSpan& lockAge, Object& lockId, SessionStateActions& actionFlags) +2395
Oracle.Web.SessionState.OracleSessionStateStore.GetItemExclusive(HttpContext context, String id, Boolean& locked, TimeSpan& lockAge, Object& lockId, SessionStateActions& actions) +54
System.Web.SessionState.SessionStateModule.GetSessionStateItem() +117
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +487
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +66
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Someone else has posted a similar error before but there are no responses to that thread.
Hence i am creating a new thread for this.
Does anyone have any clues related to this error? All suggestions welcome :-)
Thanks!

Hi Greg,
WOW..i think that just might be it. That does give me something to look into instead of just tearing my hair out.
I did read the documentation for the 11g Client components when it downloaded it from the OTN and they just had a generic statement saying that it supports 9i provided its release 2.
I found the doc your were referring to (Doc ID 207303.1). Will try out by upgrading to a newer oracle and see if that helps!
Thanks!
Edited by: user8904887 on Jun 22, 2010 1:07 AM

Oracle9i Enterprise Edition Release 9.0.1.1.1 Data Mining API

Is Data Mining API contained In Oracle9i Enterprise Edition Release 9.0.1.1.1 or in release 2 only?
Thanx

No it is not so simple. This "le signe est sur l'avant dernier octet" means that the sign is last character in number.
The sign "é" and "I" are just in my example and they are somehow calculated but I don't know how?
If I take my example there is field with format S9(13)V99 and with value 00000000071049é (and with last sign "é") and I think the last sign is somehow calculated from number. And then from this value I get the number.
00000000071049é
FFFFFFFFFFFFFFC
000000000710490 => +0000000007104,90
S9999999999999V99
Everything I try, calculating from binary to hex, or anything other, I don't get the result or the last sign and I wonder if there is some function in PL/SQL that I can use to get the result I want?
Or if you have some idea how to help me to get from "00000000071049é" to "+0000000007104,90" from example above?
Here are some other examples, just for help:
000000204592D
000000183882D
000000139441C
000000182979H
000000083361F
000000083361F
000000083361F
000000059033F
000000066273E
000000069011G
000000102615B
000000092362F
000000138215‚
000000138215‚
000000138215‚
000000138215‚
000000106760C
000000106760C
000000106760C
000000115024A
000000115024A
000000115024A
000000115024A
000000115024A
000000088149B
000000084459I

EURO Support Oracle9i Enterprise Edition Release 9.2.0.4.0 ?

Hi,
Does Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production support EURO?If yes, what should be the data type I need to use to store the same?
I have tried to store the Euro character in varchar2 data type column in the above database.When i tried to retrieve the EURO sysmbol some junk character is coming out.
I am running the Oracle on Solaris5.9 OS.
I have set Character set(NLS_LANG) as UTF8,
Note:I am able to store and retrive the EURO in 9.2.0.3.0 without any problem.
Pls help in this regard,
Thanks in advance,
Ravi

When run the DUMP the following is the output from both versions.I dont know how to interpret the result..
9.2.0.4:
DUMP(SUBJECT)
Typ=1 Len=12: 84,101,115,116,32,69,82,79,32,32,194,172
9.2.0.3:
DUMP(SUBJECT)
Typ=1 Len=19: 84,101,115,116,32,101,114,114,114,114,114,114,114,114,114,32,226,1
30,172
In the second case i able to insert and retrieve the EURO ,
How to interpret the above output,is there anything wrong?
Actually I am not using any client, however i am using Java application to access the data,
I can assure you that Applicationis working fine with other versions of Oracle,
Thanks,

Oracle Enterprise Edition Release 11.2.0.1.0 - 64bit Windows based patches

Hi,
We have Oracle Enterprise Edition Release 11.2.0.1.0 - 64bit Windows based server. I want to download latest patches for this version. From where can I get this? Please help me.
Thanks,
Mangesh

Hi;
1. Patch can be download only from metalink
2. All related patch number can be found:
NOTE:430449.1 - How to find DB Patches for the Microsoft Windows platforms My Oracle Support
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

XML Problems Oracle9i Enterprise Edition Release 9.2.0.7.0

Can anyone help me with my problem!
I am trying to import xml file into xmltype table (this is working fine), but then I want to extract data from this xmltype table but I get null from my request.
Please I need help. I have tried some examples and it is working, so I think that I am doing something wrong or the file that I have imported is not O.K.
Pleeeeeease help me.
I have this XML file:
<?xml version="1.0" ?>
<TecKomBS xmlns="http://www.bsi.si" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bsi.si http://www.bsi.si/_data/tecajnice/TecKomBS.xsd">
<tecajnica datum="2007-01-17" veljavnost="2007-01-18">
<tecaj oznaka="GBP" sifra="826">
<nakupni>0.65784</nakupni>
<prodajni>0.65586</prodajni>
</tecaj>
<tecaj oznaka="CZK" sifra="203">
<nakupni>27.910</nakupni>
<prodajni>27.826</prodajni>
</tecaj>
<tecaj oznaka="NOK" sifra="578">
<nakupni>8.3605</nakupni>
<prodajni>8.3355</prodajni>
</tecaj>
</tecajnica>
</TecKomBS>
I have loaded this file into xmltype table:
CREATE TABLE xml_tab (
id NUMBER(10),
filename VARCHAR2(100),
xml XMLTYPE)
For loading I have uset load_xml procedure that I've got from help file.
And it works fine. So I have xmltype table with xml data.
Now I need to get data from this table and I have tried this:
SQL> select extract(xml, '/TecKomBS/tecajnica') neki from xml_tab;
NEKI()
SQL>
(and I get nothing)
and this
SQL> select value(p)
2 from xml_tab x
3 , table(XMLSequence(
4 extract(x.xml, '/TecKomBS/tecajnica/tecaj'))) p;
no rows selected
SQL>
(and I got nothing)
I would like to get data from "tecaj (sifra)" and data from "nakupni" or "prodajni" ?
Can any one tell me what I am doing wrong, thanks?
For help this is strusture file for xml file, if it helps
<?xml version="1.0" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.bsi.si" xmlns="http://www.bsi.si" elementFormDefault="qualified">
<xsd:simpleType name="Tsif">
<xsd:restriction base="xsd:string">
<xsd:length value="3" />
<xsd:pattern value="\d{3}" />
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="Tozn">
<xsd:restriction base="xsd:string">
<xsd:length value="3" />
<xsd:pattern value="[A-Z]{3}" />
</xsd:restriction>
</xsd:simpleType>
<xsd:element name="TecKomBS">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="tecajnica" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="tecaj" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="nakupni" type="xsd:decimal" />
<xsd:element name="prodajni" type="xsd:decimal" />
</xsd:sequence>
<xsd:attribute name="oznaka" type="Tozn" use="required" />
<xsd:attribute name="sifra" type="Tsif" use="required" />
</xsd:complexType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="datum" type="xsd:date" use="required" />
<xsd:attribute name="veljavnost" type="xsd:date" use="required" />
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
I think that the problem is with my XPath, can anyone help me with this example ?
THANKS .....
Message was edited by:
user448268

SQL>
SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2    :xmltext :=
3 '<?xml version="1.0" encoding="UTF-8"?>
4 <TecKomBS xmlns="http://www.bsi.si" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bsi.si http://www.bsi.si
/_data/tecajnice/TecKomBS.xsd">
5     <tecajnica datum="2007-01-17" veljavnost="2007-01-18">
6             <tecaj oznaka="GBP" sifra="826">
7                     <nakupni>0.65784</nakupni>
8                     <prodajni>0.65586</prodajni>
9             </tecaj>
10             <tecaj oznaka="CZK" sifra="203">
11                     <nakupni>27.910</nakupni>
12                     <prodajni>27.826</prodajni>
13             </tecaj>
14             <tecaj oznaka="NOK" sifra="578">
15                     <nakupni>8.3605</nakupni>
16                     <prodajni>8.3355</prodajni>
17             </tecaj>
18     </tecajnica>
19 </TecKomBS>';
20 end;
21 /
PL/SQL procedure successfully completed.
SQL> column SIFRA format a20
SQL> column NAKUPNI format a20
SQL> column PRODAJNI format a20
SQL> --
SQL> select extractValue(value(t),'/tecaj/@sifra','xmlns="http://www.bsi.si" ') SIFRA,
2         extractValue(value(t),'/tecaj/nakupni','xmlns="http://www.bsi.si" ') NAKUPNI,
3         extractValue(value(t),'/tecaj/prodajni','xmlns="http://www.bsi.si" ') PRODAJNI
4    from table(xmlsequence(extract(xmltype(:xmltext),'/TecKomBS/tecajnica/tecaj','xmlns="http://www.bsi.si" '))) t
5 /
SIFRA                NAKUPNI              PRODAJNI
826                  0.65784              0.65586
203                  27.910               27.826
578                  8.3605               8.3355
SQL>
SQL>
SQL>
SQL

Oracle9i Enterprise Edition Release 9.2.0.7.0 - Imp. and data conv. problem

hello,
I have problem with importing and conversion of external data. I have data like example below:
--------1--------2--------3--------4--------5--------6--------7----
0000SLOVAC IMPORTYSGA SIVACYS 0509720070227
25112007022706881952VF7FCKFVC28871406 00ACESIEUR10100000é00000000071049é
Data in bold are numbers with last character that is calculated like the example below.
First number format is S9(2)V999999 -> 0100000é le signe est sur l'avant dernier octet C(+) D(-)
Example 1, en hexa :
0100000é => +01,000000
FFFFFFFC S99V999999
01000000
Second number format is S9(13)V99 -> 00000000071049é
Example 2, en hexa
00000000071049é
FFFFFFFFFFFFFFC
000000000710490 => +0000000007104,90
S9999999999999V99
other example:
example 00ACESIEUR10100000é00000000087498I
en hexa:
00000000087498I
FFFFFFFFFFFFFFC
000000000874989 => +0000000008749,89
S9999999999999V99
I need help with creating a function that will transform from "00000000087498I" to real number like "+0000000008749,89", but I really don't know how to do that.
Can anyone help me with my problem or explain to me how to do that?
Thanks for your time and best regards

No it is not so simple. This "le signe est sur l'avant dernier octet" means that the sign is last character in number.
The sign "é" and "I" are just in my example and they are somehow calculated but I don't know how?
If I take my example there is field with format S9(13)V99 and with value 00000000071049é (and with last sign "é") and I think the last sign is somehow calculated from number. And then from this value I get the number.
00000000071049é
FFFFFFFFFFFFFFC
000000000710490 => +0000000007104,90
S9999999999999V99
Everything I try, calculating from binary to hex, or anything other, I don't get the result or the last sign and I wonder if there is some function in PL/SQL that I can use to get the result I want?
Or if you have some idea how to help me to get from "00000000071049é" to "+0000000007104,90" from example above?
Here are some other examples, just for help:
000000204592D
000000183882D
000000139441C
000000182979H
000000083361F
000000083361F
000000083361F
000000059033F
000000066273E
000000069011G
000000102615B
000000092362F
000000138215‚
000000138215‚
000000138215‚
000000138215‚
000000106760C
000000106760C
000000106760C
000000115024A
000000115024A
000000115024A
000000115024A
000000115024A
000000088149B
000000084459I

Problem in creating queue in Oracle9i Enterprise Edition Release 9.0.1.0.0

Hi,
I am facing a problem in creating queue using DBMS_AQADM.CREATE_QUEUE_TABLE, in Oracle 9i.
Have given the following command
DBMS_AQADM.CREATE_QUEUE_TABLE ( queue_table=>'ORA_TRIG_TOPIC_TAB',
queue_payload_type=> 'SYS.AQ$_JMS_TEXT_MESSAGE',
storage_clause=>'',
sort_list=>'',
multiple_consumers=>TRUE,
message_grouping=>DBMS_AQADM.NONE,
comment=>'',
auto_commit=>TRUE,
primary_instance=>0,
secondary_instance=>0,
compatible=>'8.1',
NON_REPUDIATION=>0);
and getting the following error message
-600 ORA-00600: internal error code, arguments: [kcbgtcr_4], [38910], [0], [1],
Pls. let me know whether there is any work around is there for creating queues in 9i, having multiple_consumers property

No it is not so simple. This "le signe est sur l'avant dernier octet" means that the sign is last character in number.
The sign "é" and "I" are just in my example and they are somehow calculated but I don't know how?
If I take my example there is field with format S9(13)V99 and with value 00000000071049é (and with last sign "é") and I think the last sign is somehow calculated from number. And then from this value I get the number.
00000000071049é
FFFFFFFFFFFFFFC
000000000710490 => +0000000007104,90
S9999999999999V99
Everything I try, calculating from binary to hex, or anything other, I don't get the result or the last sign and I wonder if there is some function in PL/SQL that I can use to get the result I want?
Or if you have some idea how to help me to get from "00000000071049é" to "+0000000007104,90" from example above?
Here are some other examples, just for help:
000000204592D
000000183882D
000000139441C
000000182979H
000000083361F
000000083361F
000000083361F
000000059033F
000000066273E
000000069011G
000000102615B
000000092362F
000000138215‚
000000138215‚
000000138215‚
000000138215‚
000000106760C
000000106760C
000000106760C
000000115024A
000000115024A
000000115024A
000000115024A
000000115024A
000000088149B
000000084459I

SQL slow after upgrading to Oracle Database 10g Enterprise Edition Release

Hi all:
We have recently upgraded our database from Oracle9i Enterprise Edition Release 9.2.0.6.0 to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
After that we found that our some sql getting very slow
for example query with 9i showing result in 4 seconds while in 10g showing result in 28 seconds.
Following is the execution plan of my query in Oracle9i
Operation     Object     PARTITION_START     PARTITION_STOP     COST
SELECT STATEMENT ()                    9458
NESTED LOOPS ()                    9458
SORT (UNIQUE)
   INDEX (RANGE SCAN)     BL_EQ_PK_N               2
VIEW ()     CONTAINER_INFO               2
   UNION-ALL (PARTITION)
    TABLE ACCESS (BY INDEX ROW     SERVICE_EVENTS               1
     NESTED LOOPS ()                    11
      NESTED LOOPS ()                    10
       NESTED LOOPS (OUTER)                    9
        NESTED LOOPS ()                    8
         NESTED LOOPS ()                    7
          NESTED LOOPS ()                    6
           NESTED LOOPS ()                    5
            NESTED LOOPS ()                    4
             NESTED LOOPS (OUT                    3
              TABLE ACCESS (BY     EQUIPMENT_USES               2
               INDEX (UNIQUE S     EQUSE_PK               1
              TABLE ACCESS (BY     SHIPPING_LINES               1
               INDEX (UNIQUE S     LINE_PK
             INDEX (UNIQUE SCA     EQHT_PK
            TABLE ACCESS (BY I     EQUIPMENT_TYPES               1
             INDEX (UNIQUE SCA     EQTP_PK
           TABLE ACCESS (BY IN     EQUIPMENT_SIZES               1
            INDEX (UNIQUE SCAN     EQSZ_PK
          TABLE ACCESS (BY IND     SHIP_VISITS               2
           INDEX (RANGE SCAN)     SVISIT_UK               1
         TABLE ACCESS (BY INDE     SHIPS               1
          INDEX (UNIQUE SCAN)     SHIP_PK
        TABLE ACCESS (BY INDEX     CARE_VIR_MAP               1
         INDEX (UNIQUE SCAN)     VIR_VESVOY
       TABLE ACCESS (BY INDEX      EQUIPMENT               1
        INDEX (RANGE SCAN)     EQ_EQUSE_FK
      INDEX (RANGE SCAN)     SEVENTS_EQUSE_FK_N
    NESTED LOOPS ()                    7
     NESTED LOOPS ()                    6
      NESTED LOOPS ()                    5
       NESTED LOOPS ()                    4
        NESTED LOOPS (OUTER)                    3
         TABLE ACCESS (BY INDE     EQUIPMENT_USES               2
          INDEX (UNIQUE SCAN)     EQUSE_PK               1
         TABLE ACCESS (BY INDE     SHIPPING_LINES               1
          INDEX (UNIQUE SCAN)     LINE_PK
        INDEX (UNIQUE SCAN)     EQHT_PK
       TABLE ACCESS (BY INDEX      EQUIPMENT_TYPES               1
        INDEX (UNIQUE SCAN)     EQTP_PK
      TABLE ACCESS (BY INDEX R     EQUIPMENT_SIZES               1
       INDEX (UNIQUE SCAN)     EQSZ_PK
     TABLE ACCESS (BY INDEX RO     EQUIPMENT               1
      INDEX (RANGE SCAN)     EQ_EQUSE_FK               and following is my query plan in Oracle 10g
Operation     Object     PARTITION_START     PARTITION_STOP     COST
SELECT STATEMENT ()                    2881202
NESTED LOOPS ()                    2881202
SORT (UNIQUE)                    2
   INDEX (RANGE SCAN)     BL_EQ_PK_N               2
VIEW ()     CONTAINER_INFO               2881199
   UNION-ALL ()
    NESTED LOOPS (OUTER)                    2763680
     NESTED LOOPS ()                    2718271
      NESTED LOOPS ()                    2694552
       NESTED LOOPS ()                    2623398
        NESTED LOOPS (OUTER)                    2623380
         NESTED LOOPS ()                    2393965
          NESTED LOOPS ()                    2393949
           NESTED LOOPS ()                    2164536
            NESTED LOOPS ()                    1706647
             NESTED LOOPS ()                    854120
              TABLE ACCESS (FU     BL_EQUIPMENT               1515
              TABLE ACCESS (BY     EQUIPMENT_USES               1
               INDEX (UNIQUE S     EQUSE_PK               1
             TABLE ACCESS (BY      EQUIPMENT               1
              INDEX (RANGE SCA     EQ_EQUSE_FK               1
            TABLE ACCESS (BY I     EQUIPMENT_TYPES               1
             INDEX (UNIQUE SCA     EQTP_PK               1
           TABLE ACCESS (BY IN     EQUIPMENT_SIZES               1
            INDEX (UNIQUE SCAN     EQSZ_PK               1
          INDEX (UNIQUE SCAN)     EQHT_PK               1
         TABLE ACCESS (BY INDE     SHIPPING_LINES               1
          INDEX (UNIQUE SCAN)     LINE_PK               1
        INDEX (RANGE SCAN)     SEVENTS_TSERV_FK_N               1
       TABLE ACCESS (BY INDEX      SHIP_VISITS               2
        INDEX (RANGE SCAN)     SVISIT_UK               2
      TABLE ACCESS (BY INDEX R     SHIPS               1
       INDEX (UNIQUE SCAN)     SHIP_PK               1
     TABLE ACCESS (BY INDEX RO     CARE_VIR_MAP               2
      INDEX (UNIQUE SCAN)     VIR_VESVOY               1
    NESTED LOOPS (OUTER)                    117519
     NESTED LOOPS ()                    98158
      NESTED LOOPS ()                    78798
       NESTED LOOPS ()                    78795
        NESTED LOOPS ()                    59432
         TABLE ACCESS (FULL)     EQUIPMENT_USES               20788
         TABLE ACCESS (BY INDE     EQUIPMENT_TYPES               1
          INDEX (UNIQUE SCAN)     EQTP_PK               1
        TABLE ACCESS (BY INDEX     EQUIPMENT               1
         INDEX (RANGE SCAN)     EQ_EQUSE_FK               1
       INDEX (UNIQUE SCAN)     EQHT_PK               1
      TABLE ACCESS (BY INDEX R     EQUIPMENT_SIZES               1
       INDEX (UNIQUE SCAN)     EQSZ_PK               1
     TABLE ACCESS (BY INDEX RO     SHIPPING_LINES               1
      INDEX (UNIQUE SCAN)     LINE_PK               1can somebody help me regarding this?
Thanks
Hassan

I would say ..gather stats on 9i/10gfor the required table and indexes , then post the expalin plan.
--Girish

UNABLE TO SET parallel_automatic_tuning=TRUE IN Oracle9i Enterprise Edition

Hi,
i am trying to set parallel_automatic_tuning=TRUE . but i am unable to set it.
My oracle version is as below.
SQL> SELECT * FROM V$VERSION;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
Please help to resolve this issue.
thanks
sivasankar.

hi i am unable to set the value as true for parallel_automatic_tuning parameter. ,
SQL> SHOW PARAMETER PARALLEL
NAME TYPE VALUE
fast_start_parallel_rollback string LOW
log_parallelism integer 1
parallel_adaptive_multi_user boolean TRUE
parallel_automatic_tuning boolean FALSE
parallel_execution_message_size integer 2148
parallel_instance_group string
parallel_max_servers integer 5
parallel_min_percent integer 0
parallel_min_servers integer 0
parallel_server boolean FALSE
parallel_server_instances integer 1
NAME TYPE VALUE
parallel_threads_per_cpu integer 2
recovery_parallelism integer 0

Oracle9i Enterprise Edition for HP/IA64, Release 2 Install Error

Help Me!
Oracle9i Enterprise Edition for HP/IA64, Release 2 (v9.2.0.2)
Install Error
OS Version : HPUX 11.23
Me English is insufficient.
Until end it reads and week route it wants.
Me the help is necessary.
The oracle before establishing, it established the gcc and the binutil first.
Is the different package necessary?
Error Message(make.log)
=============================================================
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/oracle/app/oracle/product/9.2.0.2
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/app/oracle/product/9.2.0.2
     (if [ "compile" = "compile" ] ; then \
     /oracle/app/oracle/product/9.2.0.2/bin/gennttab > ntcontab.c ;\
     cc +DD64 -c ntcontab.c ;\
     rm -f /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ;\
     mv ntcontab.o /oracle/app/oracle/product/9.2.0.2/lib/ ;\
     /usr/ccs/bin/ar rv /oracle/app/oracle/product/9.2.0.2/lib/libn9.a /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ; fi)
cc: Couldn't open the message catalog: "/opt/ansic/lib/nls/msg/C/cc.cat".
r - /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o
ar: file ntcontab.o is built with mismatched data abi
Stop.
*** Error exit code 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/app/oracle/product/9.2.0.2
     (if [ "compile" = "compile" ] ; then \
     /oracle/app/oracle/product/9.2.0.2/bin/gennttab > ntcontab.c ;\
     cc +DD64 -c ntcontab.c ;\
     rm -f /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ;\
     mv ntcontab.o /oracle/app/oracle/product/9.2.0.2/lib/ ;\
     /usr/ccs/bin/ar rv /oracle/app/oracle/product/9.2.0.2/lib/libn9.a /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ; fi)
cc: Couldn't open the message catalog: "/opt/ansic/lib/nls/msg/C/cc.cat".
r - /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o
ar: file ntcontab.o is built with mismatched data abi
*** Error exit code 1
Stop.
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/oracle/app/oracle/product/9.2.0.2
     (if [ "compile" = "compile" ] ; then \
     /oracle/app/oracle/product/9.2.0.2/bin/gennfgt > nnfgt.c ;\
     cc +DD64 -c nnfgt.c ;\
     rm -f /oracle/app/oracle/product/9.2.0.2/lib/nnfgt.o ;\
     mv nnfgt.o /oracle/app/oracle/product/9.2.0.2/lib/ ;\
     /usr/ccs/bin/ar rv /oracle/app/oracle/product/9.2.0.2/lib/libn9.a /oracle/app/oracle/product/9.2.0.2/lib/nnfgt.o ; fi)
cc: Couldn't open the message catalog: "/opt/ansic/lib/nls/msg/C/cc.cat".
ar: file nnfgt.o is built with mismatched data abi
r - /oracle/app/oracle/product/9.2.0.2/lib/nnfgt.o
*** Error exit code 1
=============================================================
Error Message(InstallActions.log)
=============================================================
Exception String: Error in invoking target ntcontab.o of makefile /oracle/app/oracle/product/9.2.0.2/network/lib/ins_net_client.mk
Exception Severity: 1
Exception handling set to prompt user with options to RETRY IGNORE
User choice : Retry
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ntcontab.o of makefile /oracle/app/oracle/product/9.2.0.2/network/lib/ins_net_client.mk
Exception Severity: 1
Exception handling set to prompt user with options to RETRY IGNORE
=============================================================

Hi,
I had installed Oracle 9.2 on HP-UX 11i and the configuration assistants failed to start and it showed me the same errors. Can you tell me how did u solve u r problem.
Thanks
Satish

Desupport Notice for Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit

Similar Messages

Maybe you are looking for