Detail ViewObject in AppModule won't retrieve data

I have a viewobject called BidView that is called BidByPK in my AppModule. There is another viewobject called PoolDetailView and is a child of BidByPK and is called PoolDetailsForBid in the appmodule. (I have defined a viewlink between BidView and PoolDetailView)
If I test it through my application module, I get see the correct children for the parent record.
However when I execute the project the appmodule won't retrieve the children.
Once I set the where clause on BidByPK I DO get one row as expected but the PoolDetailByPK view object instance is always empty..

Jitendra,
Could you clarify the following statement?
However when I execute the project the appmodule won't retrieve the children.Did you make changes to master when you execute? Is this after you set the where clause or before you change the where clause on BidByPK?
Thanks,
Yvonne

Similar Messages

How to expose master-detail ViewObject of AppModule to service interface.

Hi all,
There is two VOs(master-detail), One is deptmentVO and the other is emloyeeInDeptVo. and a view link between departmentVO and employeeInDeptVO, the relationship is master detail.
Now, I want to expose the custom method to web service, i.e createEmployee(EmployeeInDeptViewRowImpl employee).
I perform the steps in Fusion ADF guide(+11.2.6 How to Support Nested Processing in Service-Enabled Master-Detail View Objects+).
such as generate the SDO, and set the SERVICE_PROCESS_CHILDREN=true of the viewlink property.
But when I publish the method in service interface, I cant get operation of the nested VO(employeeInDeptVO), only the master ViewObject is available.
Any one have suggestions on this.
Thank in advance.

I have a similar scenario, and I'm seeing the same thing. The detail view isn't available for selection in the edit "Service View Instances" dialog of the "Service Interface" tab of the related application module. In my case, I have a view link based on an association that is rooted in a foreign key relationship between the underlying DB tables. The view link includes accessors in both the master and detail views. Based on the developer guide, I should be able to service enable the detail view, but this doesn't seem possible. My master view is service enabled, but my detail view isn't.
Has anyone ever successfully service enabled a detail view in a master-detail relationship?
Thanks

Failed to retrieve data from the database. Details: [Database Vendor .....

Hello,
I hope that is the right forum for this issue.
We have the application 'Lodestar' for some years.
The frond-end is ASP and the database is Oracle 9. Lodestar has its own backend language "Rules language". The crystal version is 10
Now we have a new version of Lodestar with ASP and ASP.NET, Oracle 11g and Crystal 11.
But when we run some reports with the new version we get the error "Failed to retrieve data from the database. Details: [Database Vendor Code: 1652 ] Failed to retrieve data from the database." When I google on this error then it seems that it has something todo with tablespace.
We have changed the tablespace volume from 32Gb to 100Gb, but we still get this error.
Has anybody an idea what the cause could be?
Error
<REPORT_ERROR>
<REPORT_NAME>G_GV_DEALLIST</REPORT_NAME>
<REPORT_TYPE>CRYSTAL</REPORT_TYPE>
<MESSAGE>Failed to retrieve data from the database. Details: [Database Vendor Code: 1652 ] Failed to retrieve data from the database. Error in File G_GV_DEALLIST{54DEAA95-37B9-495B-B7E8-76BC575FA75F} {A3D1B090-322B-47D3-A84F-F003FF482C48}.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: 1652 ]</MESSAGE>
<STACK_TRACE>at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) at Lodestar.crComGen.crCrystalNet.crAppNet.crGenerateReport(String connectstr, String qualifier, String guid, String altconn, String login, String url, StreamWriter sw)</STACK_TRACE>
</REPORT_ERROR>
Thanks in advance.
With regards,
Nico

Thanks all for you're reaction.
Oke we have changed the temp space from 30 Gigs --> 200 Gigs, but still the problem occurs. To make the temp tablespace is not the good direction, this is what the dba'er told me.
I'm not a guru with SQL/Oracle, but what for me hard to understand is" why does it work with the old version and not with the new version anymore?
It is a very difficult view with unions (I'm not the developer of this view), and I think I'm gonna try to break-down this view in different small parts and try to find where it goes wrong. I don't see any other way to investigate this problem.
(I see now the reaction of upul indika.)
Edited by: user12054070 on 24-feb-2012 0:27

Failed to retrieve data from the database. Details: [Database Vendor Code: 997 ]

Post Author: aya
CA Forum: Crystal Reports
Hi I am getting following problem while launching Crystal Report
Failed to retrieve data from the database. Details: [Database Vendor Code: 997 ] Failed to retrieve data from the database. Details: [Database Vendor Code: 997 ]
The database is Oracle.
Thanks

Post Author: pvierheilig
CA Forum: Crystal Reports
Have you been able to resolve this yet? I don't have any reference to Oracle error codes but would suspect a quick Google of something like 'Oracle error code 997' should result in good information, since it is an Oracle error...
Hope this helps.

Failed to retrieve data from the database (Apache derby). Details: java.lang.reflect.InvacationTargetException

Post Author: johnnighter
CA Forum: Data Connectivity and SQL
Hi,Good Day !I followed crxi_java_bean_data_source.pdf to setup and configure Crystal Report XI (Product Version 11.0.0.1282, CR Developer; Product Type: Full).Below is the sample code.import java.sql.*;public class CRSampleDataSourceBean { private ResultSet resultSet = null; private Connection connection = null; private String connectionURL = "jdbc:derby:MyDatabase"; private String databaseClass = "org.apache.derby.jdbc.EmbeddedDriver"; private String query = "SELECT * FROM CUSTOMER"; public CRSampleDataSourceBean() { try { Class.forName(databaseClass); connection = DriverManager.getConnection(connectionURL, "", ""); } catch (ClassNotFoundException ex) { System.out.println("Ensure that database driver class is installed."); ex.printStackTrace(); } catch (SQLException ex) { System.out.println("SQL Exception #" + ex.getErrorCode() + " : " + ex.getLocalizedMessage()); ex.printStackTrace(); } } public ResultSet getResultSet() throws SQLException { Statement statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY); resultSet = statement.executeQuery(query); return resultSet; }}Compile no error. It display at the "Java Beans Connectivity" screen, and able to select from the "Java Bean Classes" combobox.It display at the "Available Data Sources" (left hand side) with database name CRSampleDataSourceBean->getResultSet. BUT when click the ">" or ">>" button, it display an error message "Failed to retrieve data from the database. Details: java.lang.reflect.InvacationTargetException". Please advice. regards,johnnighter

Post Author: pvierheilig
CA Forum: Crystal Reports
Have you been able to resolve this yet? I don't have any reference to Oracle error codes but would suspect a quick Google of something like 'Oracle error code 997' should result in good information, since it is an Oracle error...
Hope this helps.

Duplicate the details section when I retrieve data from Delivery notes

Hey all.
I built a query that retrieve data from ODLN and it works fine.
But, when I have a Delivery Notes Document that has items from some different orders (that I copy them to Delivery notes of course) it duplicate my rows in the report
I run the query at SQL server and it's work fine (on the same document)
Is someone knows why this is happen?

If one of these programs will not kick the iPod out of recovery mode than you are out of luck.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
Your only home is to restore from your last backup
iOS: Back up and restore your iOS device with iCloud or iTunes

ADF 10.1.2/10.1.3: Preventing eagerly querying of detail viewobjects

Ever since we started developer ADF applications we had issues with database queries being performed when we didn't expect it. It turned out that this is the default behavior of the master-detail synchronization in ADF 10.1.2 and 10.1.3 (haven't tested 11 yet). I've come up with a solution of our own, which I want to share with you all. I also want to check if anybody here sees any drawbacks in this approach.
First some background info: Whenever the master view object is requeried or navigates to another row it requeries all detail view objects that have been queried previously. Detail view objects that are in their initial/clean state are not touched.
So, on the very first page of your application you might need DEPT and EMP, and they are automatically queried (since the ADF bindings are refreshed). However, when you navigate to the next page it might only use the DEPT ViewObject. If you navigate to another DEPT, the EMP query is also re-executed even if this next page doesn't have a binding for EMP.
Steve Muench described a possible workaround (number 74) at
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
Although his solution works, we didn't really like it. Here's a summary of his approach:
<ul>
<li> add a method <tt>enableDetailsForViewInstances()</tt> to the ADF BC Application Module. This accepts an array of view instance names representing the views used on the current page. It then enabled/disables the master-detail synchronization for each viewlink based so that only the viewlinks relevant to the current page are enabled.</li>
<li> add a custom <tt>JSFPageLifecycle</tt> class that overrides the <tt>prepareModel()</tt> method.
This methods assembles a list of all view instances used by the iterator bindings of the current page. It then calls the method on the ADF BC Application Module to enable/disable the viewlinks</li>
</ul>
The Application Module disables master-detail synchronization by calling <tt>removeMasterRowSetIterator()</tt> on the detail viewobject. This removes the master-RowSetIterator from the default RowSetIterator of the detail VO, effectively breaking the link. The old master-RowSetIterator is kept in a HashMap. Later, when both the master and detail VO are used on the same page the link is restored by calling <tt>setMasterRowSetIterator()</tt> on the detail with the master-RowSetIterator stored in the HashMap.
The main objection we had to this approach is that you are pushing the relevant viewobjects from the View layer to the Model layer. We would like the Model not to be too knowledgable about the View layer. Also, this means things break if you get a hold of a detail viewobject some other way, for instance by calling findViewObject on the AppModule or by having an old reference to the detail VO. If you get hold of such a VO instance without calling <tt>enableDetailsForViewInstances()</tt> it would not have a master-rowsetiterator and an exception is thrown about the bind parameter from the viewlink being null.
I tried to find a solution that is transparent to the View layer or other client. I wanted a solution where the eager master-detail navigation is disabled and the detail would only be requeried/refreshed when explicitely called for. This could either be your custom code calling the ViewObject or the JSF View layer having an ADF binding to the ViewObject. Basically I want to try to reset the detail ViewObject to its initial/clean state as the master VO won't requery the detail VO's that are in the initial stage. It only requeries the detail VOs that have a default RowSet and RowSetIterator.
After quite some digging around I came up with:
<ul>
<li>clear/close the <tt>RowSetIterator</tt> on the detail <tt>ViewObject</tt> when navigating to another row in the master <tt>ViewObject</tt>. To do this, we use a <tt>DetailClearingListener</tt> class that implements the <tt>RowSetListener</tt> interface.</li>
<li>The <tt>DetailClearingListener</tt> class implements the <tt>navigated(NavigationEvent event)</tt> method. This gets executed when the (master) ViewObject navigates to another row. In this <tt>navigate()</tt> method I iterate over <tt>ViewObject.getViewLinks()</tt> to find all the links where the navigating ViewObject is the source (=master). Then I look at the ViewObject from the destination (=detail) part of the link.
For each detail ViewObject I get the RowSetIterators by calling <tt>ViewObject.getRowSetIterators()</tt>. Then I close all these RowSetIterators by calling <tt>closeRowSetIterator()</tt> on them</li>
<li>The tricky part was to properly register this listener with the master ViewObject. As it turns out, you can call <tt>addListener()</tt> on the ViewObject, but in fact it is just relaying this to the default RowSetIterator of the ViewObject. It's the RowSetIterator that registers the listeners and calls them when required. This proved to be a problem, when a ViewObject is both the detail in a master-detail relationship and also the master in (another) master-detail relationship.
With the DetailClearingListeners in place, the first (highest) master-detail relationship will close the default RowSetIterator on it's detail VO when navigating the master. Unfortunately this also destroys the registered listeners on this default RowSetIterator that need to managed the lower master-detail relationship.
The only workable solution we could find is to override the <tt>getDefaultRowSet()</tt> method in the ViewObject and register the listener there. This means that whenever the default rowset (and rowsetiterator) is requested, we make sure we register the DetailClearingListener before returning the rowset. Since we can't test if the listener is already registered it does mean we frequently register the listener even when it is not necessary. Luckily enough the internal implemention does prevent duplicates and will ignore any new listeners that are already registered. This is why we are creating only a single instance of the DetailClearingListener and store it in a private member variable of the ViewObject. That way, we use the same DetailClearingListener instance each time and duplicates are prevented.</li>
<li>The big benefit of this approach is that only relies on changes to the ViewObject. This can easily be implemented by giving all your ViewObjects a common superclass that implements this solution. In most cases, you already have an application- or enterprise-wide ViewObjectImpl class that is the basis for all your ViewObjects. In that case, you can just implement the solution in that global class.</li>
</ul>
We've tested this solution in ADF 10.1.2 and 10.1.3 applications and found dramatic performance gains. We had one application were page requests took 10-15 seconds once you visited all pages in the application (thereby activating each ViewObject at least once). It was not uncommon for a navigation to another row in the master ViewObject to trigger 70-100 queries, since all the detail (and detail-detail, etc) ViewObject where eagerly requeried. With this new approach, page response times have dropped below 1 second.
So, at least in our situaton, this solution seems to work. I'm just wondering what the downside of closing the RowSetIterator is. There must be some drawbacks to this approach, but it seems I can't find any so far. Hopefully some of you can suggest what the danger/drawback is in closing a RowSetIterator.

Shay's question about experience is a good one. If you're not already proficient at UIX then I would choose JSF. If you've done very little J2EE/Java/JSP/HTML development work, you've got a couple of months of ramping up to be able to accomplish much tangible.
I've been working on a project for a couple of months using ADF BC on the backend and JSF/ADF Faces for the View. The enticement was built on the expectation that 10.1.3. would be going into production very soon, and it seems that this is true, from what little hints and clues I can pick up from these tight-mouthed Oracle guys. ;-)
The disadvantage of going that way is that the documentation sucks for doing anything but the most basic, declarative user interface development, especially if you want to use ADF Faces (there's some decent resource out in the world for JSF development, although even that is pretty thin). This is promised to be much improved with the production release.
For the business services development, unless you already know ADF Business Components I strongly recommend grabbing a copy of the Oracle JDeveloper 10g Handbook. It fills in many of the gaps that otherwise leave you at a loss for how to tie the backend pieces together.
Good luck!
Johnny Lee

Can not retrieve data in Crystal Report

Hi,
I have a problem to load data from Crystal Report in an SBO form with the ActiveX DI object : the Crystal Report Viewer message display : 'Failed to retrieve data from the database. Details [Database Vendor Code:208]'
It seems do not change the name of database in SQL Crystal Report query : My SQL query in Crystal Report file is a generic query : it must run with all custom database with the same datatable ; so the database name in FROM clause must be change with the SetLogonInfo : but it do not run !
Have you an idea ?
Francis
Here my code :
Public Class frm_CRViewer
' Adding References of project : CRAXDRT and CrystalActiveXReportViewerLib11
Private WithEvents MRO_CRV As
CrystalActiveXReportViewerLib11.CrystalActiveXReportViewer
Public Sub New()
Dim msa_Form As SAPbouiCOM.Form
Dim dsa_ActiveX As SAPbouiCOM.ActiveX ' Item <ActiveX> from form XML
dsa_ActiveX = msa_Form.Items.Item("axCRV").Specific()
dsa_ActiveX.ClassID = "CrystalReports11.ActiveXReportViewer.1"
MRO_CRV = dsa_ActiveX.Object
' Create the crystal application
Dim dob_ReportApp As New CRAXDRT.Application
' Open the report
Dim dob_Report As New CRAXDRT.Report
dob_Report = dob_ReportApp.OpenReport("c:MyTest.rpt")
' Defined to log on to the data source, and change the database name in FROM clause
Dim dob_Table As CRAXDRT.DatabaseTable
For Each dob_Table In dob_Report.Database.Tables
dob_Table.SetLogOnInfo("192.168.2.10", "AeroOneDemo", "sa", "45dfrfg5")
Next
' The report have a parameter in the sql query
dob_Report.ParameterFields.Item(1).DiscreteOrRangeKind = CRAXDRT.CRDiscreteOrRangeKind.crDiscreteValue
dob_Report.ParameterFields.Item(1).AddCurrentValue("15")
' Display the report in SBO form
Title = pst_ReportName
MRO_CRV.ReportSource = dob_Report
MRO_CRV.ViewReport()
End Sub
End Class

Try these ...
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
[url=http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460]http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460[/url]

Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -1554760125
Exit facility code: 852
Exit error code: 15939
Exit message: Failed to retrieve data for this request.
Start time: 2014-08-15 16:49:52
End time: 2014-08-15 16:50:06
Requested action: RunRules
Machine Properties:
Machine name: servername
Machine processor count: 8
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
 Message:
 Failed to retrieve data for this request.
 Data:
 HelpLink.ProdName = Microsoft SQL Server
 HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
 HelpLink.LinkId = 20476
 DisableWatson = true
 Stack:
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
 at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
 at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
 at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
 Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
 Message:
 The network path was not found.
 Data:
 WatsonData = [email protected]rror
 Stack:
 at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
 at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
 at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

 Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
 Message:
 The network path was not found.
 Data:
 WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Show master and detail viewobjects in the same jsp

I have two viewobjects which have a master-detail relationship (a viewlink between them).
What I want to do is to show both the master and the detail data in the same jsp, i.e for every row in the master viewobject I want to show all the rows in the detail viewobject.
I tried to drop the master vo on the page from the component palette and then the detail vo next to the master vo, but then only the first row in the detail vo is shown on the page. I want all of them to be shown.
Can anyone please point me in the right direction here?
Ps: I'm using JDeveloper version 9.0.5.2
Thanx a lot
Tom

I dropped both viewobjects as read-only tables and they both have the rangesize set to -1.
I think I made myself a bit unclear when asking my question. I do not want a "normal" master-detail view in my jsp where you see one masterrow and all the detailrows. I want my page to show all the masterrows with all their corresponding detail rows listed under the master row.
The pseudocode may look like this:
for each row in MasterViewObject loop
<<display data in MasterViewObject>>
for each row in DetailViewObject loop
<<display data in DetailViewObject>>
end inner loop
end outer loop
As you see I have a double loop here. Is somehing like this possible without "manually" doing all the stuff?
Thanx
Tom

Retrieve data from a synonym in oracle database through db connect

Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.

Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
 - Tools
 - SQL syntax
 - DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
 Of course, you only need to install the client software if you are using BW with a non-Oracle database.
 Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
 After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
 We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
 To provide U data for users other than U, you can create views on other user tables as user U:
 CREATE OR REPLACE VIEW viewname AS
 SELECT * FROM QDB.tablename
 You may have to grant SELECT privileges to user U in the QDB schema:
 GRANT select ON QDB.tablename TO U
 Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
 !!! Synonyms do not yet work!!!
 Synonyms that you can create as described below are another option for providing a complete table for the user U:
 CREATE SYNONYM synoname FOR QDB.tablename
 !!! Synonyms do not (yet) work!!!
 After you have displayed the require data for user U, you can simply use
 SELECT * FROM <view or table>
 on the Q system to check which data is returned.
 You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
 Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
 SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
 where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
 TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
 'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there.

Retrieving data from a BW Query runs endlessly in Crystal

Hi,
I have installed Crystal Reports 2008 SP2 with SAP BO Integration Kit 3.1. When I create a new file from a SAP BW 7 Query I everything works fine (field selction etc) until I run it and try to extract data from the database. I can enter the parameters and enter the login data for the BW connection. After that I can see the entry "retrieving data from the database" in the status bar and that's it. The screen kind of freezes and I don't get any result. I can wait for 2 hrs no result. In the end I cannot even get back to screen. I have to close it through taskmanager.
I have tested the query with transaction RSRT and the same parameter value I chose in Crystal reports and there I get a result. Therefore the entry values should be fine.
Did I install anything wrong, did somebody encounter this problem as well?
Thanks a lot in advance for any help provided
Kind Regards,
Melanie

Hi,
I entered the SQL statement in transaction MDXTest but it is running since 7 minutes.
>> Transaction MDXTEST has an option to generate a test sequence and is not there to test SQL statements. You need to enter a valid MDX statement.
Function module "/Crystal/MDX_GET_STREAM_INFO" not found
>> then I would suggest you make sure that all the Transports from the SAP Integration Kit have been properly imported - see the Installation Guide for the SAP Integration Kit for details.
Ingo

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

Failure to install SQL Server 2012 SP1 CU8/9 with a "Failed to retrieve data for this request." error

Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure,
review the log files.
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2014-04-10 11:51:11
End time: 2014-04-10 11:51:49
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine name: VMSPDB2
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: Australia
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database
Engine Services 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server
Replication 1033 Enterprise
Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text
and Semantic Extractions for Search 1033 Enterprise Edition 11.1.3000.0 No
Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data
Quality Services 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Basic 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
Client Tools Connectivity 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Integration Services 1033
Enterprise Edition 11.1.3000.0 No Yes
Package properties:
 Description: Microsoft SQL Server 2012 Service Pack 1
 ProductName: SQL Server 2012
 Type: RTM
 Version: 11
 SPLevel: 1
KBArticle: KB2931078
 KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
 PatchType: QFE
 AssociatedHotfixBuild: 0
 Platform: x64
 PatchLevel: 11.1.3412.0
 ProductVersion: 11.1.3000.0
 GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
 PackageName: SQLServer2012-KB2931078-x64.exe
Installation location: e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
 ACTION: Patch
 ALLINSTANCES: false
 CLUSTERPASSIVE: false
 CONFIGURATIONFILE:
ENU: false
 HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
 INDICATEPROGRESS: false
 INSTANCEID: <empty>
 INSTANCENAME: <empty>
 QUIET: false
 QUIETSIMPLE: false
 SQMREPORTING: false
 UIMODE: Normal
 X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
 Message:
 Failed to retrieve data for this request.
 HResult : 0x80131500
 Data:
 HelpLink.ProdName = Microsoft SQL Server
 HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
 HelpLink.LinkId = 20476
 HelpLink.EvtType =
0xB2652E58@0xDC80C325
 DisableWatson = true
 Stack:
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
 at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
 at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
 at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
 Inner exception type: System.ComponentModel.Win32Exception
 Message:
 Not all privileges or groups referenced are assigned to the caller.
 HResult : 0x80004005
 Error : 1300
 Stack:
 at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
 at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
 at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey
key)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey
machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess registryAccess)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
 at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action: InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are
assigned to the caller.
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
 at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
 at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess
registryAccess, Boolean& alreadyCached)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
 at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 --- End of inner exception stack trace ---
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView
regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: --- End of inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the following file to Watson reporting: C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01) 2014-04-10 11:51:39 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp: Data:
(01) 2014-04-10 11:51:39 Slp: HelpLink.ProdName = Microsoft SQL Server
(01) 2014-04-10 11:51:39 Slp: HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39 Slp: HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath,
String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01) 2014-04-10 11:51:39 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80004005
(01) 2014-04-10 11:51:39 Slp: Error : 1300
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx,
String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File 'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: Error result: -2146233088
(01) 2014-04-10 11:51:51 Slp: Result facility code: 19
(01) 2014-04-10 11:51:51 Slp: Result error code: 5376
(01) 2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.

Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Detail ViewObject in AppModule won't retrieve data

Similar Messages

Maybe you are looking for