Detailed File Share Auditing not working properly (Applying to All Files)

System is Windows 2008 R2, member server. The Default Domain policy has Audit account logon events, Audit account management, & Audit privilege use turned on for Success, Failure...pretty standard. I want to enable Detailed File Share Auditing for a
specific file share on this member server.
The problem is that I am getting audit events in the Security log for folders that do not have Auditing set on them, namely a "My Documents" share for Folder Redirection and \\*\IPC$ The root of the drive has nothing set for auditing. Again I only
set it on a single folder and sub-folders under that. What am I missing here?
I run the command on the member server to set this up (auditpol /set /subcategory:"Detailed File Share" /success:enable /failure:enable) That works fine.
Result of auditpol /get /category:"Object Access" :
System audit policy
Category/Subcategory                      Setting
Object Access
File System                             No Auditing
Registry                                No Auditing
Kernel Object                           No Auditing
SAM                                     No Auditing
Certification Services                  No Auditing
Application Generated                   No Auditing
Handle Manipulation                     No Auditing
File Share                              No Auditing
Filtering Platform Packet Drop          No Auditing
Filtering Platform Connection           No Auditing
Other Object Access Events              No Auditing
Detailed File Share                     Success and Failure
Now I went to the file share to set the audit permissions. Security>>Advanced>>Auditing>>Continue. Set Everyone Full Control for Success and Failure (all boxes checked).
I am using NTFS permissions for security, the share level permission on the folder are Everyone Full.
Michael Maxwell

I think found the reason. Could someone please clarify this statement for me?
Since there are no SACLs for shares, once this setting is enabled, access to all shares on the system will be audited.
So what is the workaround for this? Is there one? I'm confused as usual.
Michael Maxwell

Similar Messages

Windows Network Shares do not work properly

Ever since installing LEOPARD (now running 10.5.2) my network shares on our Windows server are not working properly. I can connect in the office via cifs:// and the share appears. I cannot copy a file to the share. I get the following message:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
There is an icon with a size of 0kb on the share, and if I try to open it or trash it, I get a message telling me it is in use by the MAC OS. I can open a file from the share, but if I try to save it back to the share or save from an application I get a "There has been a network file permission error."
If I try to copy the file to my desktop. I get a message that tells me that I don't have permission.
If I try to connect using https:// I get a username or password not valid message. Both of the connection methods worked BEFORE I installed LEOPARD. The install was a clean install, not an upgrade. I NEED to be able to access the shares for my work. The shares are on a server running Windows Server 2003 Service Pack 2.
How can I solve this? I actually have administrator privileges on the server with my login credentials, but this does not seem to matter.

Experiencing the same exact problems here. Brand new Mac Pro on a Windows 2003 Server network. Somehow I don't think it is any rights problems in my case, as I can create and erase folders (created by me or others), and the Mac writes the .DS_Store files to the server...
However, if I try to copy a single file or a folder containing files to the server, I get only a 0k file (inside the folder if I copy a folder) and after a while an error message saying the same things William Colvin2 mentions above (not sufficient privileges).
Everything I have read seems to indicate that there is huge problems with Leopard with regard to this, and if that is true, they need to be fixed ASAP. I think I've tried and tested all the possible "solutions" (disabling SMB digital signature, GPO policies, disabling IPv6...) but still no solution in sight.
Can we get some info from Apple on this whether it's being worked on, or what we can do to SOLVE this problem? As far as I know, Windows 2003 Server hasn't changed in that respect recently, whereas OSX has gone from 10.4 Tiger to 10.5 Leopard...
Any help with solving the problem is greatly appreciated, so feel free to respond with anything that might be helpful. I would also be interested in hearing from people who have HAD this problem, but has gotten them solved. And if so, what solved it for you.
Thanks in advance.

java.io.File instance .list() not working properly

i want to get the file, folders in any directory, so i used the File.list() method.
but it is working in a peculiar manner. first see my simplified code, where the problem i am having::
public class FileChildTest {
     public static void main(String[] args) {
          try{
               String[] s=new java.io.File(args[0]).list();
               for (int i = 0; i<s.length; i++){
                    System.out.println (s);
          catch(java.lang.Exception ex){
now, say i saved it in c:\MyJava directory. now when i run it with cmd line argument c: in stead of listing the file/folders in c: drive it lists the file/folders of c:\MyJava directory. in any other case its working fine.
now if i save the file in d:\MyJava\src. again it gives same problem when CLA is d: , but working fine for any other arg.
now xplain me why is this happening. do i have any fault or what?
and whats the solution.
can ne1 pls.

to b more scecific, in the 2nd case it lists the files/folders of d:\MyJava\src folder.

Share Auditing not working on Server 2012 R2

I have configured Auditing on one of our shares and have configured it like this: http://i.imgur.com/fgQp0A8.png
However, when I create a folder on this share or delete one. Nothing is written to the security log. Am I doing something wrong? I read on this post (http://social.technet.microsoft.com/Forums/en-US/231f8918-3de8-46bd-8872-f5106f7fe8fa/audit-deleted-files-server-2012?forum=winserversecurity)
that you need to enable some local security policies so I have enabled this: http://i.imgur.com/uOP7f4d.png
What am I doing wrong?
Thanks for you help!
Brian

Hi Brian,
Is this server in Active Directory domain? Did we enable the Audit Object Access policy for this server?
Besides, after enabling audit object access, to audit accessing a share folder, try the following steps:
Right click the folder, and choose Properties
Under Security tab, click Advanced
Under Auditing tab, Add the principal and edit the access permissions you want to audit
Hope it helps.
Best regards.
Frank Shen

File share is not working in conference

Hi,
Please help me to resolve this issue.
In conference i am not getting any option to share file and to make call.
I have deployed 2 Lync front end server . In both front end server conference services not showing in services.msc window.

In the conference policy do we have "EnableFileTransfer" is it set to true
http://blogs.technet.com/b/nexthop/archive/2011/08/11/confpoliciesenableappdesktopsharing.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Logical file path is not working properly with different DTP's

Hi all,
I have a open hub, that push data in to application server(AL11) with file name /tmp/.
I have two DTP's, one for company code. P001 and other for U001.
i want to display dynamic file names as P001 when DTP for P001 is executed and U001 when DTP for U001 is executed
file names as follows /tmp/P00120110412openhub.csv and /tmp/U00120110412openhub.csv.
for this i have writen code in function module Y_FILENAME_EXIT_name. and it is working fine.
my problem is I can run only one DTP and only one time, for this it is creating the file. when i am executing the same DTP or other DTP, the DTP is running without errors and it is not creating the file in AL11. if I activate the open hub and execute the DTP then it is creating the file.
every time i have activate the open hub and then i am running the DTP's. please suggest me to avoid this.
Thanks in advance.
Regards,
Latheep.

But I don't know what log file is missing, this SQL show me sequence# 0
SQL> SELECT SPID,TYPE,STATUS FROM V$LOGSTDBY_PROCESS;
SPID TYPE STATUS
19277 COORDINATOR ORA-16240: Waiting for log file (thread# 1, sequence# 0)
How can I discover what log file is missing? Thanks.

Master License File update - apps not working properly

All:
Believe it or not, I am replacing an expired license with the master license file on a 9.2 installation. Go figure...
Anyway, I have searched for docs on what needs to be reconfigured and how after replacing the old file and have come up empty. Have run config tool to update Deployment id for both Essbase and Planning but still getting error message in Planning indicating an issue with the license and when opening HBR rules, that it cannot connect to Essbase due to licensing issue. Tried re-registering with Shared Services for both Planning and Essbase, still getting the same errors and log files are not providing much by way of clues.
Other info: License server logs shows no errors. All apps starting successfully.
Does anyone have a doc or experience with this that they can share with me? Do I need to deregister apps? Redeploy the app servers?
K

There are no virus for an iphone unless it is jailbroken.
For the message - close out of the app, then double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
this reset, might help with your other issues too.

File Save As not working properly in Photoshop after upgrading to Lion

I have recently upgraded to Lion and I am finding that I cannot browse the disk when using file save as in Photoshop. I click on the icons to expand the folders but nothing happens. Does anybody know a solution to this problem?

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Hyperlink Tool Not Working Properly When Linking To Files or Adding URLs?

Has anyone run into the issue when trying to Enable Hyperlinks where once you have enabled and entered the URL or selected the file you wish to link to, the tool box will refresh the moment you move your mouse or touch the track-pad, loosing all your progress? Has happened to me a number of times and wanted to know if there was a work around for this.

I had the same issue - I was pulling my hair out - I even called the new ORACLE Support. The Resolve to this was based on the firewalls of my company's security suite. I found that when I was directly wired to the network - I was unable to use the hyperlink tool - however if I was on the WI-FI network the hyperlink tool was unaffected. I hope this helps with your particular situation as well -let me know.
Thanks
Joel

Finder : Moving a file across tabs not working properly

In finder, while moving a file from one tab (source) to the next tab (target), the target tab is not shown/displayed, rather a blue color highlight alone seen on the target tab title. This makes me not able to browse through folders of the next tab to put the file into appropriate folder on the target tab.
Workaround : I should always keep the target folder opened in the next folder, and then from source folder, drag and move the file and leave it on the title of the target tab, which makes sucessful move/copy.
I've OS X 10.9, on my macbook pro 15", intel core 2 duo, with japanese keyboard (since bought in japan), but with English language access.

I see from your OP that several people have the same question, but I'm not seeing this behavior.
When I want to move one item in one tab to a new location in another tab, I hold the item over the second tab's title (which then highlights in blue), and continuing to hold on to the item I'm moving, I am able to drag the item anywhere I want in the new tab.
Further, continuing to hold on to the item I'm moving, I'm able to hold it over any folder in the second tab, and that folder will open and allow me to drop the item in. I can even hold the item I'm moving over folders in the Finder Sidebar and those folders will open, allowing me to navigate in and out of any of them. And, if I get lost and can't find the folder I want to drop the item in, I can drop the item onto the Finder Toolbar and the item will be replaced in its original location.

Hi ALL i have a BDC code it is not working properly

this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of   invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file

Hi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
                   WERKS
                   CHARG
           from MCHA
           into (l_matnr, l_werks, l_charg)
           where matnr = w_stck_cnt-matnr
              and werks = w_stck_cnt-werks.
              and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant

OEM not working properly

i have installed OEM 10g in windows2000. it is working normally untill yesterday.
yesterday i keep playing with the import/export because it is not working properly. And all of a sudden, the OEM seems to slow down. Especially when i click on something about storage.
any idea what happen?
any suggestion is appreciated
thanks

check the windows task manager to see what is hogging resources.. cpu or memory...and that should help.

HT2693 haw do i get a refund for an app that do not work properly (t3 magazine no sound when play the articals)

haw do i get a refund for an app that do not work properly.
i tryed all the troublesooting and still not working properly
the app is T3 magazine ther is no sound when playing the articles on the player
thenks

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

HT1338 java 7 will not work properly with Lion. In military and need to access DTS.

JAVA not working properly. Tried all found recomended solutions. Java test shows that Java is blocked but it is enabled in Safari.

apple has blocked it: http://thenextweb.com/apple/2013/01/31/for-the-second-time-this-month-apple-bloc ks-java-7-on-os-x-10-6-and-up-to-protect-mac-users/

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Detailed File Share Auditing not working properly (Applying to All Files)

Similar Messages

Maybe you are looking for