Determine default PI message from SRM

Hello,
We are implementing SRM 7 SP10 with ECS. SRM is connected to PI 7.11 .
We noticed SRM sends message "PurchaseOrderRequest_Out" during first output and "PurchaseOrderChangeRequest_Out" with any following output (whether there is a PO change or not).
Where can we determine the PI message in SRM? We would like PurchaseOrderChangeRequest_Out only for PO change.
Thanks in advance.

Hi,
You can check the PI content in the integration builder.
Regards
Sam

Similar Messages

Receiver determination when merging messages from different senders

Hi BPM/XI experts.
In my BPM scenario, I am combining 2 messages from different sender/interface/namespace. How should receiver/interface determination be configured in this case since in the ID both these configuration objects take exactly 1 sender interface?
Thanks.
Carlos
<Moderator note: moved to more appropriate XI forum>
Edited by: Mike Pokraka on Jul 22, 2008 10:30 PM

Hi,
Refer these blogs
Walkthrough with BPM - walkthrough of bpm
Delivery Modes in BPM. - delivery modes of bpm
Model-Driven Development in the Enterprise - development in Enterprises
The specified item was not found. - sender idoc packing
Regards,
Suryanarayana

Error message when calling a Business Connector RFC destination from SRM

Hello all,
We are facing one problem with data Purchase Order transmission between SRM 5.0 (SRM_SERVER 5.5, extended classic scenario) and Business Connector 4.7.
We made needed customizing in order to have "XML / XI" output medium available in tab 'Company Data' in "Manage Business Partners" web transaction (by updating BBP_USE_AI table in SM30 transaction).
Then, we implemented BAdI definition BBP_EBPXML_OUT_BADI with method PURCHASEORDER in order to change XI system type to Business Connector.
In this way, PO transfer data between SRM and BC is done using BC Module Function BAPI_POEC_XML_SEND (TCP/IP RFC connection was defined for Purchase Order in BBPC_RFCDEST table).
Nevertheless, even if method BBP_PO_SEND_XML is correctly triggered when PO is created with a vendor with XML output medium, we have in the document output log ("Process Purchase Order" web transaction) an error message:
' Error (Unknown Partner and Message Type. Routing Rule created. Sender: SMR Receiver:) when calling RFC destination BC '
where SRM is the SRM log. sys. and BC the Business Connector log. sys.
Our EAI team is working on it, but if you have any idea, your are welcome !
Thank you in advance.
Regards.
Laurent

Hello Christian,
Thank you for your help. However, we abandoned this solution between SRM and Business Connector.
So, we followed instructions indicated in OSS note 883693 - "ECS: PO output determination in R/3".
Nevertheless, in order to restrict this behaviour for specific vendors and purchasing organizations, we added some filters.
It is working fine.
However, when the PO is modified in SRM, then order again, PO is modified in R/3 (by the RFC user from SRM) more than once.
As a consequence, we have as much messages as modifications of the order in R/3 (due to multiple RFC access with the SRM RFC user).
Does anybody have an idea to have only one R/3 output message when the PO is modified in SRM ?
One solution could be to check in the NAST table if the time creation of the last output message is lower than, for example, one minute.
If it is the case, we do not allow R/3 ouput message.
Any suggestions is welcome.
Regards.
Laurent.

Outgoing mail keeps defaulting to a secondary account rather than the account I sent the message from?

I have a new MacBook Air. I have two google mail accounts set up in the mail app - one primary account and one secondary account. For some reason my outgoing messages keep defaulting to the secondary account. Even when I create a new message or reply to a message from the primary account and have the primary account highlighted, replies keep coming back to the secondary account. When I hover over the outgoing email address, it looks like it was sent from the secondary account even though I sent it from the primary account. I've gone into settings and looked at everything, and I still can't figure out what is causing this problem.

i know it may sound crazy, but it does.
I sent the same email out through my outlook and the person received the correct version. There is an issue with my Mail but thanks for the advice tho.

Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
Thank you
Don

Tax code determination when a PO is created from SRM

Hi Experts
I am using extended classic SRM 7.0
When a PO is transferred to the SAP backend system, sometimes the TAX code is different from what was supplied in FM BBP_PO_INBOUND.
It looks like; tax code determination in backend system determines a different code and does not use the tax code supplied when PO is created.
Is there a way to override this tax determination in backend system so that it uses the Tax code supplied rather than determine a tax code that is different?
This seems to be a problem when a new PO is created because when I change the PO and this sent again, the backend system is updated correctly with the Tax code supplied from SRM.
I hope some has come across this type of situation and can suggest something.
Regards

I put your HTML page (TEST2.html) and CSS file (body_new.css) on my server and it looks OK.
http://www.ossiningdesignguild.com/TEST2.html
It's possible your web server is not properly configured and sends a Content-Type HTTP header that says text/plain instead of text/css for your style sheet file.
If you're using Apache, have your server admin check the httpd.conf file for MIME type settings.
Should they need assistance, send them here:
http://httpd.apache.org/docs/2.2/configuring.html
This is not a problem with your main site since the CSS is embedded, rather than remote.
I'll call you after lunch.
Ken

Remove message from message determination in billing docs

I want to generate an SD billing document ONLY if another message is not determined to the some document.
I'm determining the billing message type to be printed by Sales Organization.
I started to send Electronic Invoices to some partners, and I want to Not generate the ZRD0 message to the document if another message (ZRDI EDI document)exists (is determined) for that document.
Is there any easy way to do this? Is there any user-exit in SD billing document where I can test the existence of a message and delete other message from NAST?
Thank you
Best regards

Hi,
in the IMG, you can define a requirement in the access sequence related to your document (where your output type is determined). This requirement is in fact a piece of code where you define whether you want to generate the output or not.
It's a kind of user-exit during the output determination. As you have there access to fields of KOMKBV3, you should be able to check NAST with correct parameters.
I think you can try this...

CCMS issue: "Determining warning messages from CCMS"

Hi!
We have a performance problem by accessing of solution in tcode DSWP.
We retrieve the warning: "Determining warning messages from CCMS"
In order to solve or analyse this problem I have the following questions:
1) How collects CEN the data from satelite systems?
1a) how? --> RFC, etc.
1b) mode? --> Push, Pull, etc.
2) How the data will be transfered from CEN to tcode DSWP?
Any helpful information will be appreciated.
regards
Thom

Hi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger

Tcode DSWP, Determining warning messages from CCMS

We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to access the desired solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
How can I check whether all the agents work in push mode and that we do not use standard CCMS methods that can cause the RFC load?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger

Change Status/Message from BE to SRM

Hello,
I have the following situation: A SC is transfered to the BE. For some special products an additional item (limit item) is added in the BE to the PO. This results in the following situation:
SRM        BE
1SC         1PO
- P1          - P1
                - P2 (limit item, cat=B)
Currently the status 'Fehler im Ablauf' is set obviously of this additional line item in BE.
My question: Is it possible to change the messages/status (CLEAN_REQREQ_UP, BBP_GET_STATUS_2) which is set while a SC is transfered from SRM to BE in this special situation? Is there a BADI in place which can be used?
Kind regards,
Thomas

Hello,
in SRM7.0 this seems to be a standard behaviour although you can add items to the follow-on document via BADI.
The relevant coding can be found here:
Class: CL_BBP_BS_SPOOL_SC_CRT_CLASSIC
Method: UPDATE_BE_FIELDS
IF lv_srm_items NE lv_be_items. " The backend document exists but does not match SC! Should never happen!
    IF 1 = 0. MESSAGE e178(bbp_pu). ENDIF. " error in backend system, inform sysadmin
    ls_message-msgty = 'E'.
    ls_message-msgid = 'BBP_PU'.
    ls_message-msgno = '178'.
    MESSAGE ID ls_message-msgid TYPE ls_message-msgty NUMBER ls_message-msgno INTO ls_message-message.
    APPEND ls_message TO lt_messages.
    CREATE OBJECT lx_sc_transfer.
    lx_sc_transfer->put_bbp_messages( EXPORTING it_message = lt_messages ).
    RAISE EXCEPTION lx_sc_transfer.
ENDIF.
Kind regards,
Thomas

CCMS: Determining warning messages from CCMS

Hi!
We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to enter into the solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
As I know there are two ways of sending/retrieving the data:
via RFC (pull)
via CCMS (push)
Which method is faster?
Is there some changes in CCMSPING possible? (interval for sending/retrieving the data)?
Is there some other settings (likw profile parameters e.g. rdisp/...) that could be performed to solve the problem?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
The CCMSPING agent uses two methods to check availability. One is to connect to the message server using "Ping monitoring" the other method is to check whether you can actually login on the application server and that requires an RFC connection. When you configure Availability monitoring you will see you can configure either or both methods depending on what your requirements are.
The data is collected and stored in a memory segment reserved for monitoring. The agent connects to this segment on your monitored systems and transfers it to your CEN at the set intervals where it is cached. Edit: sorry if confusing, this method used by sappccm4x agent. CCMSPING connects directly to your application server message service to check availability.
You keep asking which is faster but as mentioned you may require both methods depending on your requirements.
Factors like how busy your application servers are(RFC calls require free dialog work processes) and how long the agent should wait before receiving a response will effect the performance which is why you are able to adjust ping timeout and frequency. How many systems are being monitored and how much data is being transfered from those systems is another factor to consider.
Regards,
Nelis
Edited by: Nelis Lamprecht on May 15, 2008 3:11 PM

Error message from Internet Explorer v8.0.6

My Muse test site is currently on Business Catalyst. The url is http://wfax-test.businesscatalyst.com — my client says that they get an error message from Internet Explorer version 8.0.6 "MuseJSAssert: error calling selector function: error: a security problem occurred". The good news is that this only appears on the "Schedule" page of the site. Any idea what it could be? My client is afraid for me to put the site online because of this error message.

Hi Artby,
In your page, you have a link to "http://[email protected]//[email protected]" (Saturday Afternoon at 3:00). This link is technically a valid link, but I'm not sure it is what you intended. If you where looking to create an email there, you should remove the http:// in front of the link and Muse should properly create an email link. If you were trying to go to a website, I'd recommend you check the URL again to make sure you have it right.
The link is throwing a security error because we have to do some extra processing for some of our links, so we check each of the urls and try to determine if there is extra logic we need. In this case, this link is telling the browser you'd like to "login" to the site qemi.org with the username "apostle". IE 8, by default, will block us from reading information from this type of link in case there is a password, or in case we shouldn't know the username. It is a security measure (thus the error) and should pose no risk.
If you did intend to have that URL, then this won't quite work at the moment in Muse. To work around this, you could pull out this small snippet into a custom HTML element or something, which Muse won't try and process (though you'd need to remove the class "nonblock" from the link if you copy/pasted the Muse export code).
Hope that helps,
Andrew

Error while trying to pick message from weblogic queue

Hi,
We are getting the following error while trying to connect to pick up a message from weblogic queue.
We are suing oracle soa suite 10.1.3.1 and weblogic 8.1
the bad part is that, this error is not documented anywhere and couldn't get much help on this.
Would appreciate any suggestions / pointers on this.
Let me know if any further information is required.
invoke failed
org.collaxa.thirdparty.apache.wsif.WSIFException: file:/E:/product/10.1.3.1/OracleAS_4/bpel/domains/default/tmp/.bpel_OTOCBPELProcess_1.0_78fcf080ec2bd7495aebfb5373e76116.tmp/readmsg.wsdl [ Consume_Message_ptt::Consume_Message(opaque) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
---------------------------------------------------

Hi!
I am facing a similar issue, does someone have an idea ?
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="detail"><detail>null</detail>
</part><part name="summary"><summary>file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TestReceiveMessage_BPEL_1.0_e00fd88d454889b871183d0d92dc9f7d.tmp/plReceiveMessage.wsdl [ Consume_Message_ptt::Consume_Message(TestPushMessage_BPELProcessRequest) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
Please examine the log file to determine the problem.
</summary>
</part></remoteFault>
Thanks,
romain.

How to send message from multiline container to same webservice or bus. sys

Hi All,
I want to send message from multiline container to a syn web service sequentially.
I am getting that multiline container after a transformations step (1: n mapping).
where i dont known what will be the value for n (number of message in multiline container). This will vary; depend upon input message to BPM.
Scenario is like this.
1. Receive step
2. Transfromation to 1: n
3. Want to send message from multiline container to a web service (business service),default loop and block step doesnt give desirable result.
any help will be appreciable
Regards,
Adish

Adish Jain wrote:>
> where as, if I will use block, it will send the same message to multiple receivers which are present in multiline receiver container. So need to think in different manner.
Not necessarily.
When you use block step in ForEach mode, you can select the container variable from:
- a receiver container;
- an interface container;
The line element can then be either a receiver or an interface.
The problem is that for this to work, the interfaces need to be async (since they are to be used as containers) and hence you won't be able to make your scenario work.
But again, explain why your scenario with loop step didn't work.
The only gap here is how to determine the number of loops (defining the counter variable value). But that can be easily solved if you include a new message with occurrence 1 as a target message of your mapping and as a container in your bpm.
This new message needs only 1 single field, that should be filled with the number of messages you've created in the mapping (you could use count standard function, f.ex.).
In your bpm, make sure to pass this fields value into the counter container right after your transformation step.
Regards,
Henrique.

Lots of system log messages from nsurlstoraged, also systemstatsd

I'm running Yosemite (10.10.2) on an old Mini (details below). I am not having particular problems with slowness, crashes, etc., but I'm seeing repeated messages in the System Log which seem to be errors:
nsurlstoraged[300]: ERROR: shrinkDB - shrink of file system cache did not fully complete. Result: 11
systemstatsd[1286]: assertion failed: 14C1514: systemstatsd + 3283 [A886B71F-3A31-3324-9B30-5143FDF4ECCB]: 0xb
For at least the past 2 days, the systemstatsd messages have the exact same values. When the computer is in active use, I get 2 of them every 3 to 4 minutes.
The nsurlstoraged messages are a little more frequent but don't have such a clear pattern. Some other messages from that source which are interspersed with the above message include the following:
nsurlstoraged[1263]: realpath() returned NULL for /var/root/Library/Caches/ocspd
nsurlstoraged[1263]: The read-connection to the DB=/var/root/Library/Caches/ocspd/Cache.db is NOT valid. Unable to determine schema version.
nsurlstoraged[1263]: ERROR: unable to determine file-system usage for FS-backed cache at /var/root/Library/Caches/ocspd/fsCachedData. Errno=13
Should I be concerned about resolving these, or can I just ignore them? I did run the string of commands provided in the forum by Linc which are intended to reset the privileges on everything in my home directory to the default values, and I also ran the password reset process via the recovery partition to reset the ACLs.
Just a few quick notes about my system:
- the volume My Mac system (external) is not the system or boot disk. It has most of my image files (including iPhoto libraries) plus the iTunes Media folder. I did not run any commands there to reset file/directory permissions.
- the volume Macintosh HD is the system disk and contains my home directory.
- I am planning to upgrade from to 4 GB to 8 GB RAM.
Thanks very much for any insight into these messages!
Dave
EtreCheck version: 2.1.8 (121)
Report generated April 7, 2015 at 9:11:16 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Early 2009) (Technical Specifications)
    Mac mini - model: Macmini3,1
    1 2.26 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400 - VRAM: 256 MB
        Acer P191W 1440 x 900 @ 60 Hz
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: one day 22:49:30
Disk Information: ℹ️
    Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        disk0s2 (disk0s2) <not mounted> : 249.20 GB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5670S
USB Information: ℹ️
    Generic Mass Storage Device
    Logitech Trackball
    Newer Tech miniStack Classic 2 TB
        disk2s1 (disk2s1) <not mounted> : 210 MB
        disk2s2 (disk2s2) <not mounted> : 249.25 GB
        My Mac Time Machine (disk2s3) /Volumes/My Mac Time Machine : 1.50 TB (831.73 GB free)
    Canon iP4300
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
    OWC Mercury Elite Pro Quad USB 3 800mbit - 800mbit max
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh HD (disk1s2) / : 319.21 GB (96.14 GB free)
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
        My Mac system (external) (disk1s4) /Volumes/My Mac system (external) : 499.46 GB (174.98 GB free)
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/TechTool Pro 7.app
    [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.8) [Click for support]
    [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.8) [Click for support]
        /Library/StartupItems/BRESINKx86Monitoring
    [not loaded]    com.bresink.driver.BRESINKx86Monitoring (9.0) [Click for support]
        /System/Library/Extensions
    [loaded]    com.microsoft.driver.MicrosoftKeyboard (8.2) [Click for support]
        /System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
    [loaded]    com.microsoft.driver.MicrosoftKeyboardBluetooth (8.2) [Click for support]
    [not loaded]    com.microsoft.driver.MicrosoftKeyboardUSB (8.2) [Click for support]
        /Users/[redacted]/Downloads/LCC Installer.app
    [not loaded]    com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) [Click for support]
Startup Items: ℹ️
    Executor: Path: /Library/StartupItems/Executor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cmfsyncagent.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.EscrowSecurityAlert.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.xpc.loginitemregisterd.plist
    9 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.xpc.smd.plist
    [killed]    org.cups.cupsd.plist
    6 processes killed due to memory pressure
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.micromat.TechToolProAgent.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [running]    com.crashplan.engine.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [running]    com.micromat.TechToolProDaemon.plist [Click for support]
    [failed]    com.nalpeiron.netpro.plist [Click for support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.amazon.cloud-player.plist [Click for support]
    [running]    com.amazon.music.plist [Click for support]
    [failed]    [email protected]
    [failed]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
    [failed]    com.google.GoogleContactSyncAgent.plist [Click for support]
    [failed]    com.plexapp.helper.plist [Click for support]
    [failed]    com.yahoo.YahooContactSyncAgent.plist [Click for support]
    [loaded]    net.jonstovell.keepMinasTirithdata(external)Spinning.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MiniUsage    Application (/Applications/MiniUsage.app)
    Alfred    Application (/Applications/Alfred.app)
    OpenDNS Updater    Application Hidden (/Applications/OpenDNS Updater.app)
    CrashPlan menu bar    Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
    OneDrive    Application (/Applications/OneDrive.app)
Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 4.1.0.0 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    Picasa: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    feedly
    Add to Google Reader
    FlickrPlus
    Ultimate Status Bar
    Exposer
    Evernote Web Clipper
    InvisibleHand
    Turn Off the Lights
    The New York Times
    Procrastinate
    Better Facebook
    Save to Pocket
    Print Plus
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Microsoft Keyboard [Click for support]
    TechTool Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        My Mac system (external): Disk size: 499.46 GB Disk used: 324.48 GB
        Macintosh HD: Disk size: 319.21 GB Disk used: 223.07 GB
    Destinations:
        My Mac Time Machine [Local]
        Total size: 1.50 TB
        Total number of backups: 59
        Oldest backup: 2013-12-04 08:43:17 +0000
        Last backup: 2015-04-05 15:12:17 +0000
        Size of backup disk: Too small
            Backup size 1.50 TB < (Disk used 547.55 GB X 3)
Top Processes by CPU: ℹ️
         4%    top
         2%    WindowServer
         2%    systemstatsd
         1%    Safari
         0%    MiniUsage
Top Processes by Memory: ℹ️
    266 MB    CrashPlanService
    112 MB    Mail
    86 MB    Finder
    82 MB    Console
    69 MB    Safari
Virtual Memory Information: ℹ️
    106 MB    Free RAM
    983 MB    Active RAM
    895 MB    Inactive RAM
    870 MB    Wired RAM
    17.28 GB    Page-ins
    506 MB    Page-outs
Diagnostics Information: ℹ️
    Apr 6, 2015, 08:15:21 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.MailServiceAgent_201 5-04-06-201521_[redacted].crash
    Apr 5, 2015, 10:35:53 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-05- 223553_[redacted].crash
    Apr 5, 2015, 10:35:52 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-05- 223552_[redacted].crash
    Apr 5, 2015, 10:16:51 PM    Self test - passed
    Apr 5, 2015, 03:58:09 PM    /Library/Logs/DiagnosticReports/CrashPlanService_2015-04-05-155809_[redacted].c pu_resource.diag [Click for details]

I switched over to an early 2008 20-inch iMac (booting from same external disk) and the "ERROR:shrink DB" and "assertion failed" messages are continuing, so I doubt that it is related to the hardware unless it's the external drive itself or the Firewire cable.
Any help would be appreciated...

Determine default PI message from SRM

Similar Messages

Maybe you are looking for