Developing a screen with buttons like keyboard buttons

I want to develope a screen with a keyboard buttons (same as keyboard modal) in swings.Plz help me on this topic.
Thanks in advance.

Is there any predefined code to develope a screen with buttons same as keyboard buttons functionality model in swings technology.

Similar Messages

I hope to develop a function with java like IE's save as.How can I do?

I hope to develop a function with java like IE's save as.How can I do?

hi ,
Considering IE browser page as an object, U can use Serialization where u can save that object.(i.e state of the object) And then when u open it thru de-serialization, u can restore the page/object .
Hope that helps U .
Techie.

Ipad stuck on changing rotation of screen with buttons

So I just got home and i went on my iPad. I played a game and wanted to mute it so I used the button. However instead of muting it locked my screen. I went to settings and went to "Sounds" then I turned on Change with Buttons however it still didn't work. Help?

I just found the answer to this problem on another community page, and the solution worked, Here it is:
If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I have a similar problem. I was reading email, laid the iPad on a nearby table, and it switched to horizontal view and locked in that mode, and I can not get it to go back to being in vertical view or free rotate. I tried the control panel and the side switch - If I press the rotation lock on the control panel the home screen rotates 90 degrees and then goes right back to horizontal.

Key mapping question. (for mobile phones with PC-like keyboard)

For phones with mini keyboard (one button per one character, like a PC keyboard).
I'm trying to implement a form with few text boxes. The goal is to let user type the message like they're using a PC keyboard (unlike in traditional phones, where you need to press the 'numpad two' button three times in order to type the character 'C')
I've successfully implemented this functionality. But it's an ugly implementation because I use a switch-cases for each and EVERY keycodes.
Forexample:
char inputChar;
switch(keyCode)
case 97: input = 'A' break;
case 98: input = 'B' break;
// go on until every keys are covered, including the lower case letters. T_T
buffer.append(inputChar);
Yes I know that my programming skill is real crap >_<, so I try google for some good implementation method. But I always found only the detail about the traditional numpad implementations.
Ok, my real question is, can this keyboard implementation be done in a better way? The code should be able to look more beautiful than this, right?
Thank you. =)

I still don't get the problem here?
A textbox in a form will work just fine with those mini keyboards. You don't need to do anything for it..
Otherwise, this code can obviously be done better, a simple array where you just lookup your keycode will be much simpler and faster for instance.

How put apple store apps on the iPad screen with others like internet , face time all etc how?

How put apps on screen with another's like internet , face time have already in screen . Now want apple store apps on screen how?

If you tap and hold down on an app icon it will begin to wiggle. While it wiggles, you can drag it over to the edge of the screen and hold it about half way over on the screen for a second or two and it will jump to the next screen. You can drag one app on top of another app to create a folder if you care to do so.
When you are done, tap the home button and the apps will stop wiggling.

[HELIX] Black screen with HDMI over keyboard dock

Hi everyone, I just came across a weird issue with my Helix: When I connect my Helix including keyboard dock via HDMI to my TV the screen stays black. I checked following things: - Sound is working over TV - Screen connection is detected by Helix and also by TV (otherwise screen would be blue) - HDMI connection is working if I directly connect the tablet with the same adapter to the TV - RGB adapter is working fine also inclunding the dock I have the current driver and BIOS updates installed. Does anyone encounter the same issue or knows how to solve it? Might be either a driver or HW issue with the dock I suspect. Thanks for any input on this! Markus

If I do not use the Win-P or Ctrl-F7 key combination to change it to Duplicate Screen, then it may go automatically to "Second Screen only" which seems to be occurring in your situation.
If the setting wont change after the screen goes blank, then it could b a driver issue. If you opted the latest device driver like I did, and this still happens, I'd say it is a driver issue. However, when I made a presentation to day, it automatically switch to the proper "Duplicate setting" screen option. So perhaps yours is an intermittent problem.
Go to control Panel, Power Options, then Click on Windows Mobility Center at the bottom of the page. You will displays and toggles for External displays and for presenter mode right there. Click those to see if you get any changes. You can see if your computer thinks a second screen is attached or not, and it you are in projection mode or not.
Does the computer go back to normal after disengaging the HDMI? If so, set it to duplicate screens and then re-connect it, if the screen goes dark there must be another setting that is off.
If you are using the WiDi software that might also be the culprit, check those settings. Hope this helps in some way.
I discovered on mine that I could run a Powerpoint presentation fine, but when I try to switch over into presenting a movie clip or website, it would only show my screen saver. I still needed to use the Win-P or Cntrl-F7 key toggle to send the signal for those applications. Just seems weird, it just an idiosyncrasy I gather.

PRINT SCREEN WITH A LOGITECH KEYBOARD

CAN YOU PLEASE HELP ME I BOUGHT THIS WIRELESS LOGITECH KEYBOARD AND PAIRED IT WITH MY MAC DESKTOP COMPUTER. AM TRYING TO PRINTSCREEN BUT IT DOES NOT WANT TO. CAN ANYONE PLEASE HELP ME WITH THIS? THANK YOU!

Press the Shift, Command, and 3 keys to capture the whole screen.
Press the Shift, Command, and 4 keys to capture a draggable part of the screen, or follow it with the spacebar to capture a window.
Open the PNG on the desktop. Alternatively, combine either of the above with the Control key to put the screenshot onto the clipboard instead of the desktop.
(124233)

Stuck at grey screen with termite like sound for a minute

Hi all,
I am traveling and my macbook suddenly froze. It just gets stuck at blank grey screen for a long time. After a restart, I hear a few weird termite-like/knocking/clicking noises from hard disk area for a minute and then goes normal and then after some twenty minutes I see a question mark. I took out the hard disk and the sound is gone so I know it is definitely hard disk issue. My question is: what type of hard disk failure is it? Since it returns to sound normal after a minute, should I assume it is not mechanical failure and hard disk would be recoverable using softwares (like diskwarrior, data rescue etc.) ? I really don't have money and time to go to data recovery experts .
I consider myself an advanced user but I don't have any install discs either. I have some very important data and lot of hard work on my computer.
I would appreciate any inputs.
Thanks

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot into Recovery (if running 10.7 or later) by holding down the key combination command-R at the chime. If your startup volume is encrypted with FileVault, you’ll have to unlock it in Disk Utility before you can do anything with it.
Mac OS X: Gray screen appears during startup

MSI k8n neo4 platinum hangs in post screen with saitek eclipse keyboard

I've had my board for almost a year now, with no problems, well almost. I had a problem with Raid 0 but we won't go there now. I just purchased a Saitek Eclipse illuminated keyboard to replace my old Microsoft Internet pro. The Microsoft board is PS2 and the Eclipse is USB. I noticed that when I removed the Microsoft keyboard and plugged in the eclipse that when I rebooted, it took almost 4 minutes for the windows splash screen to start. With the PS2 board plugged in my boot time was less than 2 minutes. I've looked at just about everything, and this includes Saitek support who are at a total loss on this problem to. So I went to google and low and behold it lead me to here. I've read a lot of post about keyboard problems,but they tended to be ps2 related. This is a USB issue. The old keyboard still gets my system up in no time flat. Can anybody shed some light on this issue cause it's driving me crazy!!!! I still have my microsoft optical mouse hooked up until my Logitech G5 gets here, in a couple of days. I have not had any other isuues with USB connections, that includes a Nostromo game pad, printer , joystick and card reader.
Mike

Welll I'm screwed now. I tried all of the things you guys recommended, everything was cool. I decided to check my bios version through live update. I had 1.50 and live update had 1.90 ready to go, so I proceeded to flash the bios using the windows method. This included making a recovery disk. Well it flashed ok, everything seemed to go well up to the point where it said to restart the system. This is were it goes bad. Upon reboot my screen was black, not even tinted slightly and my system never came back. I can't even get it to eat the recovery floppy. I have Corsair twinx memory with the fancy LEDS and they just stay on the first two lights. I can't even get the Cd drive to take the mobo disk. It's late and I'm titally bumed, I knwo I won't get to sleep tonight....... I know I have to shitcan this mobo now and totally restart all over...............thanks for the replies on the lousy keyboard problem , at this point I wish I never even bought it.
Sleepless in Vermont tonight

I need a flash player that does split screen with two "like" videos

I am a newbie on Flash and really need some guidance or a source code to work off of. I need a flash player that I can have two videos, overlayed with a mask at 50% on each so I see half of one video on the right and half of the other video on the left, thus split screen.
We are trying to show off the same video with a before and after effect or show processed video on one side and non-processed video on the other.
If anyone has a sample or knows how to do this, I would be interested in talking with them.
Thanks in advance.

Basically the two videos are identical except what was processed on the post
file. So ideally we would want:
Video 1 (left side 50%)
Video 2 (right side 50%)
One controller with play, pause and full screen.
Todd

Macbook Air froze/turned it off to restart. Now it won't restart it goes to Gray screen with apple like it is loading, but when gets to the end it turns off. Try repairing it states incorrect number of thread records.Volume Macintosh HD found corrupt

Macbook Air froze/turned it off to restart. Will not restart just goes to gray screen like it is reloading and then shuts off. Have tried everything. When trying to reapir it says incorrect number of thread records, should be 108456 instead of 108455. Invalid voume directory count/the volumbe macintosh HD was found corrupt and needs to be repaired. How do I repair it?

Hello cgstephen
You would need to contact Apple or an Apple Authorized Service provider by checking out the page below. It will have everything you need to know about setting your MacBook Air up to get it repaired.
Service Answer Center - Mac notebooks
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
Regards,
-Norm G.

Move cursor through fields in screen with ENTER like TAB

Hello experts !
I want to move the cursor between fields in a custom screen just like kay TAB do.
I have used command:
MOVE CURSOR TO FIELD mara-spart... but it doesnt work, Cursor remains in th first field..,
any help?
Thank you and regards,
Ibrahim Andres

For example, here is the exact code which is working in my system and has been for quite a while.
The screen flow logic.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1500.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1500.
The code for module status_1500.
*      Module STATUS_1500 OUTPUT
module status_1500 output.
set pf-status 'STDCONSOLE'.
set titlebar '1500_07'.
<b> set cursor field cursorfield.</b>
endmodule.
The PAI module USER_COMMAND_1500
*      Module USER_COMMAND_1500 INPUT
module user_command_1500 input.
case sy-ucomm.
    when 'ENTER'.
<b>* Scroll thru fields when user hits enter
      get cursor field cursorfield.
      case cursorfield.
        when 'P_TICNO'.
          cursorfield = 'P_PERNR'.
        when 'P_PERNR'.
          cursorfield = 'P_WERKS'.
        when 'P_WERKS'.
          cursorfield = 'P_LGORT'.
        when 'P_LGORT'.
          cursorfield = 'P_AREAC'.
        when 'P_AREAC'.
          cursorfield = 'P_TICNO'.
      endcase.</b>
   endcase.
Here I'm using the same variable CURSORFIELD for setting/getting.
Regards,
Rich Heilman

How do I do print screen with a Wireless keyboard (Fn+F11 wont work)

Please please please help me asap
I have Snow Leopard, and use Boot Camp with Win XP Home on. I have an Apple Wireless Keboard, how do I do a print screen please?
Tried Fn+F11 but it just does the sound down, tried FnShiftF11 same. Really frustrating....

Had to disable the Use Function keys as standard in boot camp control panel, and then used FnShiftF11

Sony Bravia KDL 32 screen with bubble like blisters. Any recall on this issue?

My Bravia 32 has some bubbles in the screen. Any recall on this model?

Hi fitobass,
You can try the basic troubleshooting steps on the link below based on the screen problem you have :
https://us.en.kb.sony.com/app/answers/detail/a_id/42981/p/61659,62766,93159,93160/c/65,66/kw/bubbles%20on%20the%20screen
For further assistance, please provide us the exact model no. of your Sony TV.
Thanks,
Jerome
If my post answers your question, please mark it as "Accept as Solution"

I recommend that Apple develop an iPhone with a qwerty keyboard .They would gain a major market share.

A physical keyboard on an iPhone would overtake a huge marketshare.

I recommend you read the Terms of Use: https://discussions.apple.com/___sbsstatic___/apple/tutorial/tou.html

Developing a screen with buttons like keyboard buttons

Similar Messages

Maybe you are looking for