"Developing Smart Web UIs with Ajax, JSF, and ADF Faces" example

I'm trying to get this example (http://www.oracle.com/technology/pub/articles/cioroianu_jsfajax.html) to work within JDeveloper, during compilation I'm getting an error:
C:\jptest\view\public_html\msgIndexResp.jsp
Error(5): tags:property is not a registered tag in that namespace.
C:\jptest\view\public_html\helloNameResp.jsp
Error(5): tags:property is not a registered tag in that namespace.
C:\view\public_html\ajaxCtrl.jsp
Error(6): tags:response is not a registered tag in that namespace.
Has anyone attempted at this example and ran into the same problem?
Thanks
-Wes

There is no such document for (1) because we are in the process of delivering design time support for ADF BC integration with ADF Faces, as you mentioned.
Therefore, you could either continue with ADF UIX, ADFm, ADF BC for the time being, or else try out ADF Faces with session scope Managed Beans. In either case, you'll want to convert this later on, when JDev 10.1.3 completes its support for ADF Faces / ADF BC drag-and-drop integration.
Kind Regards.

Similar Messages

[ANN] JSF and ADF Faces Q&A online session today

Join us for an online discussion and ask your questions about JSF and ADF Faces. Today (Thu) at 10:00am PST (California time).
http://www.oracle.com/technology/tech/java/newsletter/seminars.html

Great here are a few IF there is time:
1. How round trips will JSF and ADF Faces take upon initial page load? In other words, does the initial page load come with data already populated? This makes a difference for those of us who have data heavy pages with lots of lag. Currently with ADF - UIX it seems as though the page is loaded and then round trips are taken to populate the data in the page.
2. Is a JSF and ADF faces project in future versions of JDeveloper more easily/efficiently source controlled than current ADF/UIX projects?
3. What is the extent of the involvement of the struts framework in JSF and ADF Faces?
Thanks very much Shay.
-brian

Not Working-central web-authentication with a switch and Identity Service Engine

on the followup the document "Configuration example : central web-authentication with a switch and Identity Service Engine" by Nicolas Darchis, since the redirection on the switch is not working, i'm asking for your help...
I'm using ISE Version : 1.0.4.573 and WS-C2960-24PC-L w/software 12.2(55)SE1 and image C2960-LANBASEK9-M for the access.
The interface configuration looks like this:
interface FastEthernet0/24
switchport access vlan 6
switchport mode access
switchport voice vlan 20
ip access-group webauth in
authentication event fail action next-method
authentication event server dead action authorize
authentication event server alive action reinitialize
authentication order mab
authentication priority mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
spanning-tree portfast
end
The ACL's
Extended IP access list webauth
    10 permit ip any any
Extended IP access list redirect
    10 deny ip any host 172.22.2.38
    20 permit tcp any any eq www
    30 permit tcp any any eq 443
The ISE side configuration I follow it step by step...
When I conect the XP client, e see the following Autenthication session...
swlx0x0x#show authentication sessions interface fastEthernet 0/24
           Interface: FastEthernet0/24
          MAC Address: 0015.c549.5c99
           IP Address: 172.22.3.184
            User-Name: 00-15-C5-49-5C-99
               Status: Authz Success
               Domain: DATA
       Oper host mode: single-host
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
     URL Redirect ACL: redirect
         URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: AC16011F000000490AC1A9E2
      Acct Session ID: 0x00000077
               Handle: 0xB7000049
Runnable methods list:
       Method   State
       mab      Authc Success
But there is no redirection, and I get the the following message on switch console:
756005: Mar 28 11:40:30: epm-redirect:IP=172.22.3.184: No redirection policy for this host
756006: Mar 28 11:40:30: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
I have to mention I'm using an http proxy on port 8080...
Any Ideas on what is going wrong?
Regards
Nuno

OK, so I upgraded the IOS to version
SW Version: 12.2(55)SE5, SW Image: C2960-LANBASEK9-M
I tweak with ACL's to the following:
Extended IP access list redirect
    10 permit ip any any (13 matches)
and created a DACL that is downloaded along with the authentication
Extended IP access list xACSACLx-IP-redirect-4f743d58 (per-user)
    10 permit ip any any
I can see the epm session
swlx0x0x#show epm session ip 172.22.3.74
     Admission feature: DOT1X
     ACS ACL: xACSACLx-IP-redirect-4f743d58
     URL Redirect ACL: redirect
     URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
And authentication
swlx0x0x#show authentication sessions interface fastEthernet 0/24
     Interface: FastEthernet0/24
     MAC Address: 0015.c549.5c99
     IP Address: 172.22.3.74
     User-Name: 00-15-C5-49-5C-99
     Status: Authz Success
     Domain: DATA
     Oper host mode: multi-auth
     Oper control dir: both
     Authorized By: Authentication Server
     Vlan Group: N/A
     ACS ACL: xACSACLx-IP-redirect-4f743d58
     URL Redirect ACL: redirect
     URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
     Session timeout: N/A
     Idle timeout: N/A
     Common Session ID: AC16011F000000160042BD98
     Acct Session ID: 0x0000001B
     Handle: 0x90000016
     Runnable methods list:
     Method   State
     mab      Authc Success
on the logging, I get the following messages...
017857: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
017858: Mar 29 11:27:04: epm-redirect:epm_redirect_cache_gen_hash: IP=172.22.3.74 Hash=271
017859: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: CacheEntryGet Success
017860: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: Ingress packet on [idb= FastEthernet0/24] matched with [acl=redirect]
017861: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Enqueue the packet with if_input=FastEthernet0/24
017862: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_process ...
017863: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Not an HTTP(s) packet
What I'm I missing?

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

3px framed picture on a Web page with Internet Explorer and Google Chrome appears normal, but Firefox is on the right side frame 9px. Why?

3px framed picture on a Web page with Internet Explorer and Google Chrome appears normal, but Firefox is on the right side frame 9px. Why?

I'm not seeing this.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
Can you attach a screenshot?
* http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

How to customize events, execute stored procedures using JSF and ADF BC

As a java beginner, I started with developing simple web application using JSF and ADF business component through visual and declarative approach. I need to know how to customize events, execute stored procedures, invoke functions on triggering events associated with rich controls. for eg. how to write customized functions on button click or checkbox click events to achieve business requirement and can be modified whenever required.
Edited by: 792068 on Aug 31, 2010 9:40 PM

Which business layer is prefered to create interactive data model: 1. ADF business components or 2. Enterprise JavaBeans using Java persistance API (JPA) or 3. Toplink 4. Portlets
which minimizes writing low level codes and how much OOPS knowledge is required for creating above business layer binding data to viewcontroller layer?

ADF Faces: is mixing JSF RI and ADF Faces tags supported?

Hi,
I'm looking at ADF Faces as a future possibility for our application that is currently based on JSF RI.
When looking at the ADF Faces demo it strikes me that all pages are almost completely built up from ADF Faces tags.
For instance
af:form
af:commandButton
af:inputText
are used instead of the equivalent core jsf tags f:form, f:commandButton and f:inputText
I'm wondering if this is mandatory if we would like to use some ADF Faces components mixed within our existing application.
In other words: are ADF Faces tags supported in the environment of conventional JSF tags? And mixing ADF Faces JSF components with JSF components by other vendors?
Another thing that strikes me is that pages are constructed using ADF Faces tags for any and all markup content.
I guess this is meant to support several different clients (normal browser applications, mobile clients, voice activation over telephone) using different renderers.
In my experience abstracting markup this way inherently means loss of control over the exact markup that is sent to the client. This is not acceptable for all projects and customers.
Is embedding ADF Faces tags within template HTML, within f:verbatim tags or not, supported?
Regards,
Joost de Vries

You absolutely can mix JSF RI and ADF Faces tags. This is very much supported! You can swap in <h:form> and <h:commandButton> and <h:inputText>. Our versions support some features that the JSF tags do not, as described in our release notes.
Your point about using tags to produce all markup is a very cogent one. For some projects, absolute control over HTML will be a necessary requirement, so we do support that style of development. But we believe strongly that the future does not lie in constant handcoding of HTML, but instead in building more powerful, flexible, and reusable components and assembling those into pages. This was one of the themes of a talk I gave with two coworkers at this past JavaOne.
-- Adam Winer (JSF EG member and ADF Faces lead)

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!

I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

ADF BC and ADF Faces deployment question

Hi all,
In my previous web project, the middle layer was packaged into a .ear file and deployed onto a sever that had jboss running. My client layer was deployed on a seperate server running tomcat. My question is how do I accomplish this seperation with BC and ADF Faces in terms of deployment?
Thanks.
Z

Let me be a bit more specific.
Here is the tree view of my application workspace:
-My Application
  -Model
    -Application Sources
      -org
      -org.myorg
      -org.myorg.model
      -org.myorg.model.entity
      -org.myorg.model.association
  -View
    -Application Sources
    -Web Content
Can I deploy only the model or middle layer on server A running oc4j and deploy the view layer on server B also running oc4j?
Thanks.

Is there any template (decoration) feature in Jdeveloper and ADF faces ?

Hi
Thank you for reading my post
is there any template / decoration facilities in Jdeveloper for ADF faces ?
for example there are some part of my web pages which are allways the same and i need to show them where ever the user is in my we application (for example a left panel contain latest emails) how i can have this feature ?
Thanks

HI!
Facelets works very well with Oracle ADF faces ,but to get a partial support from IDE(JDeveloper) , you have to build pages in jspx format, and not in xhtml format.
We are using facelets with absolutely no problem; the only hitch is that we have add all our ADF Faces components to a jpx page and then embed Facelets tags to it,for JDdeveloper does not add components to /in between Facelets tags, which is an improvement to be made, and Mr.Frank has informed me that this(Facelets support in JDeveloper) is filed as an enhancement request for the next version of JDeveloper.
Anyway, I can assure you that you can work with Facelets and ADF faces with absolutely no problems,at all;the only thing is you need to struggle some time getting the Facelets configured for ADF Faces!
Actually, I planned to write an article on accomlishing this(integrating facelets and ADF Faces),but presently I'm preoccupied with some other imoprtant task, so I'm afraid may not be able to provide the article inthis week.
Regrads,
Samba.

HP smart web printing with vista home premium and IE7

hello,
>my computer is HP pavillion slimline s7700n , printer AiO C4340, OS vista home premium 32 bit, IE is 7
>i just install HP smart web printing....this software work good when i am at my netzero main page (icon,clip, edit and print)
>
>i try to change browser (google chrome...found the icon...send it to IE toolbar...it work a couple of times...then died)
>
>HP/SWP icon is there on IE toolbar...clip book is there....alll clips are there....BUT editor show blank page only, so are prints.
>i can not understand why . i hope somebody can help.
>thanks

Driver_Found wrote:
I have installed Windows Vista 64-bit on a new computer (HP of course) and want to be able to use HP's "Smart Web Printing" software. I have used it quite a bit on a Windows XP machine and love it. Looking at the download page, it appears that the Smart Web Printing software is not compatible with Vista 64-bit. Is this correct? Will a new version be coming out that will be compatible?
Have you tried installing it anyways and see what happens?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

CAC or smart card use with Oracle database and web server

I've been asked to smart card (CAC) enable our Oracle web server and database access. We currently use CAC to access many of our other applications.
Where can I find the following information
Oracle software required (and is it an additional cost)
How to integrate Oracle App server (web server) with CAC.
How would I need to change the database users accounts to be CAC enabled rather than database users accounts.
Thanks
steven jackson
[email protected]
614-692-9768

Virtualisation is not certified for Oracle RAC on Windows.
+Certified Software on Oracle VM [ID 464754.1]+ note states:
Oracle Real Application Clusters (RAC)
    Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
        Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
        Paravirtualized (PV) mode only (Guest OS and drivers)
        Only supported on Oracle VM 2.1.2 and above
        Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
        Previous versions are not supported. Please refer to this link for best practices.
        Over-committing CPUs is not recommended, but supported with the following restrictions:
            The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
            two times (2x) the amount of real CPUs / cores in the Oracle VM server.
            The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
            cores in the Oracle VM server.
            Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
            CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
        Static support only (dynamic support is being planned):
            Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
            Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported.

Web Service with Complex Results and Flex

I have created a Enterprise Java Bean that has one "test" method that returns a String[]. I have compiled, deployed and registered this bean in Sun's Application Server 8.1. I am using NetBeans 5.0 to develop this project.
I try to load this web service into Flex and I get a fault thrown: TypeError: Error #1034: Type Coercion failed: cannot convert []@29e5d06 to XMLList. I have set the returnType in Flex as "e4X.". Do I need to do this in my webservice.
Any help would be appreciated.

HI Andrea,
    I think with present netweaver developer studio , we can create Web services with end points as simple data types in java and the array of that simple data types.
    not sure whether it support our own custom developed classes as end points.
     just go through these links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/f7/af60f2e04d0848888675a800623a81/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/f7/af60f2e04d0848888675a800623a81/frameset.htm
from this we will get Restrictions for WS Endpoints.
                         Regards
                          Kishor Gopinathan

Wanted - XML Tag with AJAX; JSF compatible

Hello, I'm looking for a tag that displays XML in a collapsible format.
So I start with an XML tree displaying level 1 tree info. When the user clicks on a node, it uses AJAX to dynamically pull info associated with the node and displays the XML sub-tree. The user can then click on a sub-node to view the tree associated with the sub-node, or collapse a node and move onto another node.
It needs to be JSF compatible too.
Is this doable and if yes, then could you recommend what hoops will I need to jump through to make it so.
Thanks.
Ciao, Bhishma

Is the XML file being generated on the fly in your servlet? Well, you wrote it, didn't you? So you should know. If your servlet is what you posted there, you aren't even generating XML. You are just generating some text, which isn't XML.
The point is, if you want XML generated then it's up to you to do that. Nothing happens automagically. If you want XML with a "message" element then you have to generate XML with a "message" element.

Web Services with REST, SOAP and JAX-RPC

Hi,
Can somebody who has developed web services extensively comment/suggest a java development environment that works best for developing web services mainly with REST. I've found that Eclipse with Axis2 and Tomcat works well. But I would like to get your opinion on it and some other alternatives.

Hi,
Please help me its urgent.
can u give me a detail example how to do Web services
with REST.
Here is my id [email protected]
Thanks in advance.You can do this in many ways. It depends on how heavy your service is. You can write a simple servlet that will take a REST (I'm assuming you know what REST is) request and parses it out, calls a server-side method and generates a REST response.
Another way is to use a web-service container such as AXIS. You can read some examples and documentation on their website. AXIS2 has REST support as well.

"Developing Smart Web UIs with Ajax, JSF, and ADF Faces" example

Similar Messages

Maybe you are looking for