Device summary pane does not show capacitiy totals for each category (audio, remaining, photos, etc.)
When viewing the summary pane for my ipod, the summary bar does not show totals for each category (audio, remaining, photos, etc.). It does not show when hovering over each category either. Seems to be some type of bug with itunes. I have tried re-installing itunes but that does not work. How do I fix this?
Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio
Similar Messages
-
Expense Report Summary page does not show any totals - only zeros
Hi All,
On creation of Expense Report in the portal When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
we are surprised that any custom development is hitting or anything relates with configuration
Provide valuable inputs to proceed further
Regards
JaipalHello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio -
My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.
Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.
-
Onlive TV listing does not show HD listing for series when I try to create a recording
It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
Here is what I am doing:
I go to this link https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
Then to ...........DVR Manger
select ...........Record A Show
I type search e.g. Nathan for You
I click on ........Search
and I select ......Click here to Show Details
Then I get to chose from 2 (the same) SD channels.
Nathan for You
190 Comedy Central
Tue, Jul 29 10:30 PM
Record Show Record Series
Nathan for You
190 Comedy Central
Tue, Aug 05 10:30 PM
Record Show Record Series
But there is the same on channel 690 HD!
This happens not only to this particular channel!
I remember it used to show also the HD channels.
The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
correct choices for both SD & HD.
Can this be fixed?
Thanks!On the right click on HD under video quality to filter it.
-
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
I just downloaded itunes 11.4 and the "Summary" button does not show up?
Hello,
I just downloaded iTunes 11.4 on my Windows 7 Premium laptop to perform an encrypted backup of my ifone 4 before receiving my ifone6. However, the "Summary button" is not showing up in iTunes. So I'm not able to select encrypt backup. I can perform a non-encrypted backup by going File->Devices->backup and that seems to create a backup. But without the ability to create an encrypted backup my passwords won't be saved in the backup, is this true? Does Versions 11.4 automatically encrypt and save off all the ifone passwords?
Kind regards,
123skernGo to settings -> iCloud and turn calendar on. This should hopefully resolve your issue
-
How do I determine the size of an event (cmd I does not show any size for events).
How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).
If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT -
Aperture does not show tick box for shared photo stream as promised on the help screen
I try to configure Aperture for iCloud shared Photo Stream. According to the help screen, I should select Preferences and see a panel with 4 tickboxes. The first three relate to My Photostream and work fine on all my devices. The crucial fourth tick box for sharing with others however does not show however. What else should I set-up to see the 4th tick box ?
You need:
'A Mac with OS X v10.8.2 or later and iPhoto 9.4 or later or Aperture 3.4 or later'
http://help.apple.com/icloud/#mmbc402b84 -
:: NWA does not show table view for monitoring reports ::
Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work. -
Search Item drop-down does not show any data for Advanced Search.
Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, SureshHi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu -
Help- Elements 9 "Does not show Advanced dialog" for downloading
Hi, I'm fairly new to elements and have gone through my "Dummies Book" and yesterday received my Elements 9 book by Scott Kelby and Matt Kloskowski. My problem is when I'm attempting to download 5 new pictures from a card that still has 700 on it - The download organizer does NOT show the "Advanced Dialog button" on the bottom-left corner of the dialog box which as Kelby and Kloskowski indicate, would allow me to select only the 5 new pictures that I am attempting to download.
Can anyone assist? Do you have any recommendations? It is clearly described (even with pictures) in the Scott Kelby book; however, my screen does not list the advanced dialog button.
Thank you-Thank you-Thank you!Bob, It just seems that using windows to import into a file and then
importing from Files and Folders is a workaround to not being able to bring
up the Advanced Dialog Button. I do appreciate and thank you for this
suggestion!
Overall, I'm disappointed in the Photoshop Elements 9 program. It appears
from reading this forum, that there are many similar difficulties with the
Advanced Dialog Button and other similar programming elements that have
perpetuated from Elements 8.
Again, thank you for your time and interest and support in this forum.
Without contributors like yourself, many "newbies" would be forever lost.
One last question, Since I've downloaded by original batch of 700 photos
three times now, what would be the easiest way of cleaning up my mess??????
Thank you. Hoping to be able to use this program by Christmas!!!!! -
Crystal Report does not show the webelement for SAP System
Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha JHi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards. -
Router 7606 does not show the inventory for the Fan module
I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull. -
Desktop 4.1.4 does not show calendar event after changing category
Palm Desktop 4.1.4 does not show (properly) a calendar event after changing its category and does not allow me editing it (on PC).
The event is seen as "grayed" region (no boarder and no 3D elevation shadow) although with different colors reminding the category ones.
Synchronization with my Tungsten E goes normally: I can see the event on the handheld, edit it, etc.
I use Win XP Pro 5.1.2600 SP3 build 2600 installed on Lenovo X61S (x86 based).
Thanks for any help.
Post relates to: Tungsten EMake sure Category is set to all. Also try switching to a different category view then back to all.
Post relates to: None
Maybe you are looking for
-
Are there any options to recover your enter passcode with out losing all info on ipad. My 1 year old somehow set an "enter passcode" which is different than the "restrictions passcode" . I am not an apple user, do not have an ipone or itunes accou
-
Sales Order Cost Estimates -- Versions?
In our MTS plant we are creating cost estimates each month with different version numbers so they can easily be compared to review cost changes. This concept in our MTO plant is (of course) a problem. We would like to create a dummy sales order and o
-
Elements 5.0 to Elements 11.0
I have most of my photos organized with tags in Elements 5.0. I am told not to load 5.0 into Windows 7 on my new computer. I will purchase the latest version of Elements - 11.0 - to install in Windows 7. Is there a file that can be transfered from
-
I can not get my Iphone or ipad to except the new email address that is now on Apple so nothing will back up or work on Icloud on those devices Thx plz help Sheyw
-
Windows 7 Download error - CDBOOT: Couldn't Find BOOTMGR
I'm downloading Windows 7 Professional from a disc. I downloaded the support software to a USB flash drive using bootcamp, and that all went fine. Then I chose the partition size, put in my Windows 7 disc, it partitioned & rebooted, and I thought it