Dfsr files does not replicate

Hi,
We're running dfsr on 2008R2 servers to replicate files, and I discovered that some files are just not replicated.
These files are not temporary files (checked using fsutil), and not filtered by file mask define on replicated folder properties (ususally ~*, *.bak, *.tmp).
It looks like a dfsr db corruption, but I don't know how to solve this. I don't know how to reset the db as some members are domain controllers.
Here's the configuration:
server1 and server2 are 2008R2 domain controllers. The replication group is ks2share-idcl.
- on server 1: file REPL-ERROR.pdf is modified
- on server 2: file not present
below is the dfsr.log output for each server.
Server1:
20150127 10:59:39.696 3076 CXML 2869 Config::XmlReader::PostProcessVolumeConfig Found volume. path:\\.\D: volumeId:{1BD6E157-5026-40DF-A729-E50F34543118}
20150127 10:59:39.696 3076 CXML 2878 Config::XmlReader::PostProcessVolumeConfig Overwriting dbPath. oldPath:\\.\D:\System Volume Information\DFSR newPath:\\.\D:\System Volume Information\DFSR
20150127 10:59:39.696 3076 CXML 2869 Config::XmlReader::PostProcessVolumeConfig Found volume. path:\\.\C: volumeId:{EC121DFF-7160-11E3-9ABE-806E6F6E6963}
20150127 10:59:39.696 3076 CXML 2878 Config::XmlReader::PostProcessVolumeConfig Overwriting dbPath. oldPath:\\.\C:\System Volume Information\DFSR newPath:\\.\C:\System Volume Information\DFSR
20150127 10:59:39.696 1300 USNC 2450 UsnConsumer::UpdateIdRecord LDB Updating ID Record:
+ fid                             0x10000000012E4F
+ usn                             0x3fe335830
+ uidVisible                      1
+ filtered                        0
+ journalWrapped                  0
+ slowRecoverCheck                0
+ pendingTombstone                0
+ internalUpdate                  0
+ dirtyShutdownMismatch           0
+ meetInstallUpdate               0
+ meetReanimated                  0
+ recUpdateTime                   20150127 09:57:37.837 GMT
+ present                         1
+ nameConflict                    0
+ attributes                      0x20
+ ghostedHeader                   0
+ data                            0
+ gvsn                            {D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654
+ uid                             {11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834
+ parent                          {11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20785
+ fence                           Default (3)
+ clockDecrementedInDirtyShutdown 0
+ clock                           20150127 09:59:39.665 GMT (0x1d03a17f70434f2)
+ createTime                      20140521 06:39:38.735 GMT
+ csId                            {124A6993-D8D9-4CEE-8D68-408E2DFCD187}
+ hash                            BB31D3D3-30267455-710BF62F-53AECE59
+ similarity                      00000000-00000000-00000000-00000000
+ name                            REPL-ERROR.pdf
+
20150127 10:59:39.696 1300 USNC 2453 UsnConsumer::UpdateIdRecord ID record updated from USN_RECORD:
+ USN_RECORD:
+ RecordLength:        88
+ MajorVersion:        2
+ MinorVersion:        0
+ FileRefNumber:       0x10000000012E4F
+ ParentFileRefNumber: 0xA000000026679
+ USN:                 0x3fe335830
+ TimeStamp:           20150127 10:59:39.665 Romance Standard Time
+ Reason:              Close Rename New Name
+ SourceInfo:          0x0
+ SecurityId:          0x0
+ FileAttributes:      0x20
+ FileNameLength:      28
+ FileNameOffset:      60
+ FileName:            REPL-ERROR.pdf
+
20150127 10:59:39.696 3076 WMIC 3066 FrsConnectionConfig::ExecQuery Executing query:select * from DfsrConnectionConfig where ReplicationGroupGUID = "957F3E93-931B-433B-941B-611352F52ED4" client:svc-zabbix
20150127 10:59:39.696 3076 FCFG   278 Configuration::ReadReplicaSetConfig Reading replica configuration file. rgId:{957F3E93-931B-433B-941B-611352F52ED4}
20150127 10:59:39.696 3076 CREG   740 Config::RegConfig::ReadConfigFilePath Location of valueName:Replica Set Configuration File is location:\\?\D:\System Volume Information\DFSR\Config\Replica_957F3E93-931B-433B-941B-611352F52ED4.XML
20150127 10:59:39.696 3076 CXML 3308 Config::XmlReader::PostProcessReplicaSetConfig Setting default schedule for connection. connId:AEC330AF-25F3-4155-A857-33CAACE1E938
20150127 10:59:39.696 3076 CXML 3308 Config::XmlReader::PostProcessReplicaSetConfig Setting default schedule for connection. connId:5195A6EB-B8F8-44B6-971D-30C35C960659
20150127 10:59:39.696 2900 OUTC 2885 OutConnectionContentSetContext::TransportRequestVvUp Received request for VvUp csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} rgName:ks2share-idcl ptr:00000000060F9F20
20150127 10:59:39.696 2900 SRTR 2242 SERVER_RequestVersionVector Sent requested version vector. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} seqNumber:8 requestType:REQUEST_NORMAL_SYNC changeType:all
20150127 10:59:39.696 2204 SRTR 2331 SERVER_AsyncPoll Processing AsyncPoll call. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13}
20150127 10:59:39.696 2204 SRTR 1099 SERVER_RequestUpdates Processing RequestUpdates call. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} credits:32 requestType:all
20150127 10:59:39.696 2204 OUTC 2817 OutConnectionContentSetContext::TransportRequestUpdates Received request for updates csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} rgName:ks2share-idcl
ptr:00000000060F9F20
20150127 10:59:39.696 2204 SRTR 2331 SERVER_AsyncPoll Processing AsyncPoll call. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13}
20150127 10:59:39.696 1488 JOIN 1201 Join::SubmitUpdate LDB Updating ID Record:
+ fid                             0x10000000012E4F
+ usn                             0x3fe335830
+ uidVisible                      1
+ filtered                        0
+ journalWrapped                  0
+ slowRecoverCheck                0
+ pendingTombstone                0
+ internalUpdate                  0
+ dirtyShutdownMismatch           0
+ meetInstallUpdate               0
+ meetReanimated                  0
+ recUpdateTime                   20150127 09:59:39.696 GMT
+ present                         1
+ nameConflict                    0
+ attributes                      0x20
+ ghostedHeader                   0
+ data                            0
+ gvsn                            {D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654
+ uid                             {11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834
+ parent                          {11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20785
+ fence                           Default (3)
+ clockDecrementedInDirtyShutdown 0
+ clock                           20150127 09:59:39.665 GMT (0x1d03a17f70434f2)
+ createTime                      20140521 06:39:38.735 GMT
+ csId                            {124A6993-D8D9-4CEE-8D68-408E2DFCD187}
+ hash                            BB31D3D3-30267455-710BF62F-53AECE59
+ similarity                      00000000-00000000-00000000-00000000
+ name                            REPL-ERROR.pdf
+
20150127 10:59:39.712 1488 JOIN 1246 Join::SubmitUpdate Sent: uid:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834 gvsn:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654 name:REPL-ERROR.pdf connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
csName:IDCLIM
20150127 10:59:39.712 3076 WMIC 1663 FrsContentSetConfig::ExecQuery Executing query:select * from DfsrReplicatedFolderConfig where ReplicationGroupGUID = "9A106F41-8D9E-470D-8A9C-1B417A9D98D8" client:svc-zabbix
20150127 10:59:39.712 3076 FCFG   177 Configuration::ReadVolumeConfig Reading all volume configuration files.
20150127 10:59:39.712 3076 CREG   740 Config::RegConfig::ReadConfigFilePath Location of valueName:Volume Configuration File is location:\\.\D:\System Volume Information\DFSR\Config\Volume_1BD6E157-5026-40DF-A729-E50F34543118.XML
20150127 10:59:39.712 2204 OUTC 2885 OutConnectionContentSetContext::TransportRequestVvUp Received request for VvUp csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} rgName:ks2share-idcl ptr:00000000060F9F20
20150127 10:59:39.712 2204 SRTR 2242 SERVER_RequestVersionVector Sent requested version vector. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} seqNumber:9 requestType:REQUEST_NORMAL_SYNC changeType:notify
20150127 10:59:39.712 1128 IINC   311 IInConnectionCreditManager::GetCredits [CREDIT] Credits Granted. totalConnectionCreditsGranted:32 totalGlobalCreditsGranted:32 csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{47D55555-7518-439E-9A31-C2E9A5B74399}
sessionTaskPtr:000000000628C6D0
20150127 10:59:39.712 1128 INCO 7343 InConnection::RequestVvUp Requested upstream version vector. requestState:00000000060D5CA0 connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM changeType:all
20150127 10:59:39.712 3612 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{00000000-0000-0000-0000-000000000000} reqType:AsyncPollRequest reqState:Completed status:0 ptr:0000000017F8B960
20150127 10:59:39.712 3612 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} reqType:VvUpRequest reqState:Completed status:0 ptr:00000000060D5CA0
20150127 10:59:39.712 3612 INCO 3621 InConnection::ReceiveVvUp Received VvUp connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM vvUp:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC} |-> { 494221..1973654}
+ {F3E1FA1B-B2B9-4960-8FD6-A63A2935299E} |-> { 458202..888205}
+ {11DBD3CA-0B16-44E2-A4BC-1E86F590109E} |-> { 43..185837}
+
20150127 10:59:39.712 3612 INCO 3628 InConnection::ReceiveVvUp Creating new session:4 requestState:00000000060D5CA0 connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM vvDown:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}
|-> { 494221..1973654}
+ {F3E1FA1B-B2B9-4960-8FD6-A63A2935299E} |-> { 458202..888205}
+ {11DBD3CA-0B16-44E2-A4BC-1E86F590109E} |-> { 43..185837}
+
20150127 10:59:39.712 3612 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{00000000-0000-0000-0000-000000000000} reqType:AsyncPollRequest reqState:Completed status:0 ptr:0000000017F8B960
20150127 10:59:39.712 1888 INCO 8561 InConnection::InConnectionContentSetContext::Hibernate Hibernating: connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
20150127 10:59:39.712 1888 IINC   392 IInConnectionCreditManager::ReturnCredits [CREDIT] Credits have been returned. creditsToReturn:32 totalConnectionCreditsGranted:0 totalGlobalCreditsGranted:0 csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM
connId:{47D55555-7518-439E-9A31-C2E9A5B74399} sessionTaskPtr:000000000628C6D0
20150127 10:59:39.712 1888 INCO 7343 InConnection::RequestVvUp Requested upstream version vector. requestState:00000000060D5CA0 connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM changeType:notify
20150127 10:59:39.712 3612 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} reqType:VvUpRequest reqState:Completed status:0 ptr:00000000060D5CA0
20150127 10:59:39.712 3076 CREG   740 Config::RegConfig::ReadConfigFilePath Location of valueName:Volume Configuration File is location:\\.\C:\System Volume Information\DFSR\Config\Volume_EC121DFF-7160-11E3-9ABE-806E6F6E6963.XML
20150127 10:59:39.712 3076 CXML 2869 Config::XmlReader::PostProcessVolumeConfig Found volume. path:\\.\D: volumeId:{1BD6E157-5026-40DF-A729-E50F34543118}
20150127 10:59:39.712 3076 CXML 2878 Config::XmlReader::PostProcessVolumeConfig Overwriting dbPath. oldPath:\\.\D:\System Volume Information\DFSR newPath:\\.\D:\System Volume Information\DFSR
20150127 10:59:39.712 3076 CXML 2869 Config::XmlReader::PostProcessVolumeConfig Found volume. path:\\.\C: volumeId:{EC121DFF-7160-11E3-9ABE-806E6F6E6963}
20150127 10:59:39.712 3076 CXML 2878 Config::XmlReader::PostProcessVolumeConfig Overwriting dbPath. oldPath:\\.\C:\System Volume Information\DFSR newPath:\\.\C:\System Volume Information\DFSR
Server2:
20150127 10:59:39.689 2532 INCO 3628 InConnection::ReceiveVvUp Creating new session:4 requestState:00000000188193E0 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM vvDown:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}
|-> { 494221..1973653}
+ {F3E1FA1B-B2B9-4960-8FD6-A63A2935299E} |-> { 458202..888205}
+ {11DBD3CA-0B16-44E2-A4BC-1E86F590109E} |-> { 43..185837}
+
20150127 10:59:39.689 2532 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{00000000-0000-0000-0000-000000000000} reqType:AsyncPollRequest reqState:Completed status:0 ptr:0000000002818980
20150127 10:59:39.689 8108 INCO 7225 InConnection::RequestUpdates Updates have been requested. creditsObtained:32 totalConnectionCreditsGranted:32 totalGlobalCreditsGranted:32 outstandingCredits:32 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
csName:IDCLIM sessionTaskPtr:00000000026D3240 requestType:all cursor:{00000000-0000-0000-0000-000000000000}-v0 delta:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC} |-> { 1973654}
+
20150127 10:59:39.697 2532 INCO 3248 InConnection::ReceiveUpdates Upstream credits:32 creditsAvailable:32 creditsUsed:1 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM
20150127 10:59:39.697 2532 INCO 3322 InConnection::ReceiveUpdates Received: uid:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834 gvsn:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654 fileName:REPL-ERROR.pdf session:4 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13}
csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM
20150127 10:59:39.697 2532 INCO 3386 InConnection::ReceiveUpdates Session has been closed. sessionId:4 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM
20150127 10:59:39.697 2532 IINC   392 IInConnectionCreditManager::ReturnCredits [CREDIT] Credits have been returned. creditsToReturn:31 totalConnectionCreditsGranted:1 totalGlobalCreditsGranted:1 csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM
connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} sessionTaskPtr:00000000026D3240
20150127 10:59:39.697 2532 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} reqType:UpdateRequest reqState:Completed status:0 ptr:00000000188193E0
20150127 10:59:39.697 6860 MEET 1339 Meet::Install Retries:0 updateName:REPL-ERROR.pdf uid:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834 gvsn:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csName:IDCLIM updateType:remote
20150127 10:59:39.697 6740 INCO 7343 InConnection::RequestVvUp Requested upstream version vector. requestState:000000001889E5A0 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM changeType:notify
20150127 10:59:39.698 2532 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} reqType:VvUpRequest reqState:Completed status:0 ptr:000000001889E5A0
20150127 10:59:39.698 6860 MEET 4274 Meet::ProcessUid Uid related found uidRelatedGvsn:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20835 updateName:REPL-ERROR.pdf uid:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834 gvsn:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654
connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csName:IDCLIM
20150127 10:59:39.698 6860 MEET 6282 Meet::LocalDominates Local version dominates localgvsn:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20835 updateName:REPL-ERROR.pdf uid:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834 gvsn:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654
connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csName:IDCLIM
20150127 10:59:39.698 6860 MEET 4406 Meet::ProcessUid -> DONE Local version dominates localGvsn:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20835 updateName:REPL-ERROR.pdf uid:{11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834 gvsn:{D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654
connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csName:IDCLIM csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
20150127 10:59:39.698 6860 INCO 4825 InConnection::UpdateProcessed Received Update. updatesLeft:0 processed:1 failures:0 sessionId:4 open:0 updateType:0 processStatus:0 connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
csName:IDCLIM update:
+ present                         1
+ nameConflict                    0
+ attributes                      0x20
+ ghostedHeader                   0
+ data                            0
+ gvsn                            {D821A515-A484-4D82-AC3E-7DBDDEDB89BC}-v1973654
+ uid                             {11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20834
+ parent                          {11DBD3CA-0B16-44E2-A4BC-1E86F590109E}-v20785
+ fence                           Default (3)
+ clockDecrementedInDirtyShutdown 0
+ clock                           20150127 09:59:39.665 GMT (0x1d03a17f70434f2)
+ createTime                      20140521 06:39:38.735 GMT
+ csId                            {124A6993-D8D9-4CEE-8D68-408E2DFCD187}
+ hash                            BB31D3D3-30267455-710BF62F-53AECE59
+ similarity                      00000000-00000000-00000000-00000000
+ name                            REPL-ERROR.pdf
+
20150127 10:59:39.700 6860 INCO 5551 InConnection::CommitSession Connection in sync connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM commitedSessionsWithUpdateFailures:0
20150127 10:59:39.700 6860 IINC   392 IInConnectionCreditManager::ReturnCredits [CREDIT] Credits have been returned. creditsToReturn:1 totalConnectionCreditsGranted:0 totalGlobalCreditsGranted:0 csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM
connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} sessionTaskPtr:00000000026D3240
20150127 10:59:39.700 8108 INCO 8561 InConnection::InConnectionContentSetContext::Hibernate Hibernating: connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
20150127 10:59:39.700 8108 UPMG   580 UpdateManager::FinalizeUpdateManager Finalizing UpdateManager connId:{1865D780-A257-4E1C-BC02-756A1C5E6C13} csName:IDCLIM csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187}
20150127 10:59:39.702 5732 OUTC 2885 OutConnectionContentSetContext::TransportRequestVvUp Received request for VvUp csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{47D55555-7518-439E-9A31-C2E9A5B74399} rgName:ks2share-idcl ptr:0000000002782C20
20150127 10:59:39.702 5732 SRTR 2242 SERVER_RequestVersionVector Sent requested version vector. connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} seqNumber:8 requestType:REQUEST_NORMAL_SYNC changeType:all
20150127 10:59:39.702 5732 SRTR 2331 SERVER_AsyncPoll Processing AsyncPoll call. connId:{47D55555-7518-439E-9A31-C2E9A5B74399}
20150127 10:59:39.703 5732 OUTC 2885 OutConnectionContentSetContext::TransportRequestVvUp Received request for VvUp csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{47D55555-7518-439E-9A31-C2E9A5B74399} rgName:ks2share-idcl ptr:0000000002782C20
20150127 10:59:39.703 5732 SRTR 2242 SERVER_RequestVersionVector Sent requested version vector. connId:{47D55555-7518-439E-9A31-C2E9A5B74399} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} seqNumber:9 requestType:REQUEST_NORMAL_SYNC changeType:notify
20150127 10:59:39.703 7732 SRTR 2331 SERVER_AsyncPoll Processing AsyncPoll call. connId:{47D55555-7518-439E-9A31-C2E9A5B74399}
20150127 10:59:39.747 5732 SRTR 2331 SERVER_AsyncPoll Processing AsyncPoll call. connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE}
20150127 10:59:39.751 5732 OUTC 2885 OutConnectionContentSetContext::TransportRequestVvUp Received request for VvUp csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE} rgName:ks2share-idcl ptr:00000000027833A0
20150127 10:59:39.751 5732 SRTR 2242 SERVER_RequestVersionVector Sent requested version vector. connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} seqNumber:8 requestType:REQUEST_NORMAL_SYNC changeType:all
20150127 10:59:39.798 5732 SRTR 2331 SERVER_AsyncPoll Processing AsyncPoll call. connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE}
20150127 10:59:39.801 5732 SRTR 1099 SERVER_RequestUpdates Processing RequestUpdates call. connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} credits:32 requestType:all
20150127 10:59:39.801 5732 OUTC 2817 OutConnectionContentSetContext::TransportRequestUpdates Received request for updates csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE} rgName:ks2share-idcl
ptr:00000000027833A0
20150127 10:59:39.853 5732 OUTC 2885 OutConnectionContentSetContext::TransportRequestVvUp Received request for VvUp csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} csName:IDCLIM connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE} rgName:ks2share-idcl ptr:00000000027833A0
20150127 10:59:39.853 5732 SRTR 2242 SERVER_RequestVersionVector Sent requested version vector. connId:{C7839F24-8090-4FD0-A10A-FB93FC4871AE} csId:{124A6993-D8D9-4CEE-8D68-408E2DFCD187} seqNumber:9 requestType:REQUEST_NORMAL_SYNC changeType:notify
20150127 10:59:39.856 2532 DOWN 2833 AsyncRpcHandler::ProcessReceive Completion. connId:{2285E492-D4CC-40F5-A120-5A0205655A90} csId:{00000000-0000-0000-0000-000000000000} reqType:AsyncPollRequest reqState:Completed status:0 ptr:00000000028187F0
We can see on server the message "LocalDominates Local version dominates localgvsn", but file does not exists....
Please help.
Vincent

Hi,
Though you tried to delete, have you tried rename, or move them into a different folder?
And you mentioned fsutil so I assume you have already know the following article. But still incase some steps were missed:
DFSR Does Not Replicate Temporary Files
http://blogs.technet.com/askds/archive/2008/11/11/dfsr-does-not-replicate-temporary-files.aspx
Meanwhile, I don't think reset DFSR database will affect AD replication. NTDS.dit is stored in a different location. If it will not work with a rename (and change path), you can test to reset DFSR database.
1. Stop and ALSO disable the DFSR service on <ServerA> server (don't just simply stop it)
2. In Windows Explorer open the specific drive
3. Right click on the "System Volume Information" directory and select Properties\Security
Note: You might need to select the option for "Show hidden files, folders or drives" and also uncheck "Hide protected operating system files" in the folders view options to be able to even see the "System Volume Information" directory.
4. Grant your user account that you're logged in with (if a member of Administrators group this will also suffice) "Full Control" to the "System Volume Information" directory.
Note: You may get an error on setting security on some files - this is expected.
5. Open an elevated/Administrative command prompt. Switch to the "<drive letter>:\System Volume Information" directory
6. Type the command "rmdir DFSR /s"
7. Enable and re-start the DFSR service on <ServerA> server
8. We will then set the <ServerA> server as the Primary member with dfsradmin.exe utility –
Dfsradmin Membership Set /RGName:<RG Name> /RFName:<RF Name> /MemName:<Member Name> /IsPrimary:True
Note: Files will be replicated from ServerA to all other targets. So if there is any newer file on other target servers, backup before starting replication.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].

Similar Messages

MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards

Content Organizer bug - PDF files does not get routed correctly if autodeclaration is on and library level default values are set

It looks like whenever one specifies Column default values at a library level then the content organizer routing goes a bit awry SPECIFICALLY FOR NON OFFICE FILES [e.g. PDF] . Below are the observations and issues
1. Column level default value set on a record library with auto declaration of records turned on. The content organizer routes the document to the library but also keeps a copy of the document in the drop off library. It does not remove it from the drop
off library. The instant we clear the default value settings at the library level of the target library the content organizer works as expected again.
2. If default value settings are specified on a column in the target library then the PDF file gets routed to the document library but all the metadata is blanked out. The copy of the file that remains in the drop off library has all the correct metadata but
the target library has blanked out metadata.
Are the 2 observations described above by design or are they bugs? If so is there any documentation that is available that proves this because this does not make logical sense and proving this to a client in the absence of any documentation is a challenge.
The problem goes away if we shift the default value to the site columns directly at the site collection level. It's just the library level defaults that the pdf files do not seem to agree with

Hi Lisa,
Thanks for responding. This can be replicated in any environment but is only replicable for a specific combination of content organizer settings . The combination of settings I am referring to can be seen in the screenshot below. If you turn off redirect
users to the drop off library for direct uploads to libraries and if you turn on sharepoint versioning then you should be able to replicate the issue. Also we are using managed metadata site columns. I simplified this use case to a custom content content type
with just 2 custom managed metadata columns and can still replicate the issue in several environments. Also note the issue does not occur if the default values are set at the site or site collection level. It only occurs if you set the column value default
at a library level. I was able to replicate this on a completely vanilla Enterprise records site collection freshly created just to test this. Also note that the issue is not that the file does not reach the destination library. The issue is the
document does not get removed from the drop off library after it is transfered to the destination library which technically should have gotten removed.

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

File does not exist: /oa_servlets/AppsLogin-Urgent plz

Hi;
I have r11.5.9 on AIX 5.2 i create one new AIX 5.3 server give same IP and copy all folder from 5.2 to 5.3 wiht exact path.
With same user i can open db+lsnr+apache on new 5.3 server But when i try to login EBS i can see login page also Ebuniess enter link but when i click it it thoruh 404 page can not found
In apache log file i have File does not exist: /oa_servlets/AppsLogin, i can not find pages under $COMMONTOP on 5.2 and my new 5.3 server. But on 5.2 i canlogin system wihtout any issue
All services start wihtout problem also db, i run autoconfig on appstier but when i try to run on dbtier it thotugh error:( I am not sure i need to run autoconfig on dbtier for upper erro)
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /xxx/xxdb/9.2.0
/xxx/xxdb/9.2.0/jdk/bin/jre and /xxx/xxdb/9.2.0/jdk/9.2.0/jdk/bin/java not found Pass option 'java' on command line
and yes there is no such a file like that. How i can solve those problem
thanks

Hussein i cant run autoconfig also preclone on dbtier but apps tier i could run autoconfig and its end wihtout error
http://xx:8001/OA_HTML/jsp/fnd/aoljtest.jsp http://xxx:8001/pls/TEST2/FND_WEB.PING - too
http://xx:8001/aplogon.html
I cant open those too
Fri Sep 17 19:49:00 2010] [error] [ File does not exist: /oa_servlets/AppsLogin
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Fri Sep 17 20:14:39 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:39 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:51 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:51 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:55 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:55 2010] [error] [] File does not exist:
[Fri Sep 17 20:15:06 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:06 2010] [error] [ File does not exist: /servlets/Hello -
[Fri Sep 17 20:15:11 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:11 2010] [error] [ File does not exist: /servlets/Hello
[Fri Sep 17 20:15:14 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:14 2010] [error] [] File does not exist: /servlets/
[Fri Sep 17 20:15:50 2010] [error] [] File does not exist: /xxxx/portal/oracle/_servlets/Hello
[Fri Sep 17 20:15:59 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:59 2010] [error File does not exist: /oa_servlets/Hello
[Fri Sep 17 20:16:15 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:16:15 2010] [error] [] File does not exist:
[Fri Sep 17 20:18:04 2010] [error] script not found or unable to stat: /xx\xxora/8.0.6/tools/web60/cgi/ifcgi60

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

File does not exist: /www/public_html/null, referer: - error in log file from IE8 and IE9

I just updated an existing slide show that was created several months back. Since loading my new set of files to our web server, we keep getting the following error in our server log files when someone loads our page in IE8 and IE9:
File does not exist: /www/public_html/null, referer:
One of our programmers tracked the error to this line of code, but we're not sure what's causing it:
Muse.Utils.addSelectorFn('#slideshowu70', function(elem) { new WebPro.Widget.ContentSlideShow(elem, {autoPlay:true,displayInterval:6000,slideLinkStopsSlideShow:false,transitionStyle:'horizo ntal',lightboxEnabled_runtime:false,shuffle:false}); });/* #slideshowu70 */
Any suggestions?
Thanks!

The errors aren't showing up on the client side, only in the server access logs. Every time the page is loaded with IE8 or IE9 and the Muse.Utils.addSelectorFn with the #slideshowu70 line is hit, it generates four errors in the server access logs.
Our admin guy pulled the errors from where it was clicked on from the Adobe forum. He said it also appeared that you tested it with www added to the url (if this was when you were testing it)...
[Mon Feb 04 13:58:57 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:00 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:08 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:33 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://www.stingrayboats.com/
[Mon Feb 04 13:59:43 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://www.stingrayboats.com/
The reason we find it strange is because it did not result in errors with the previous version of the slideshow. The only thing that changed this time around is that I removed some slides and added additional ones, but I noticed that there is a lot of difference in the code and even the scripts that are used. And I did copy over all of the scripts, css files, etc., so it's using all of the new source files.
I was hoping it was something that you guys had noticed if you review the access logs when you're testing. While it works perfectly on the client side, the IT guys do go through our access logs, so it would be nice to eliminate the errors.
Thanks for looking at it!

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

Error in script task "The name 'file' does not exist in the current context"

I am new to the c# scripting and SSIS come from PHP and Foxpro.
I am using SSIS with a script task and I am getting am errror "The name 'file' does not exist in the current context" in the following code in the picture below: (See
Why does the object named "file" go away after the first refrence to it?? How do I make it avaliable for the whole script??
     public void Main()
        String cFileInfo = null;
        DateTime dFTPFileDateTime;
   bool fireAgain = true;
            List<IRemoteFileInfo> fileList = (List<IRemoteFileInfo>)Dts.Variables["SFTPResult"].Value;
            foreach (IRemoteFileInfo file in fileList)
                cFileInfo = file.Name + "|" +file.ModifiedTime +"|"+ file.Size;
            Dts.Events.FireInformation(1, "Name ", cFileInfo, "", 0, ref fireAgain);
            dFTPFileDateTime =
file.ModifiedTime;
<< This is where the error is occuring.
            Dts.TaskResult = (int)ScriptResults.Success;

I think you forgot { and } after the loop... Or is that deliberately?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

File does not exist :C:/oracle/product/10.2.0/db/apache/apache/htdocs/emd/m

Dear All,
unable to Login on Logging into Apex Login Page,
in Apache Log the Following Error is found
[ecid:1213173391:172.20.233.149:1788:1840:1.0]
File does not exist :C:/oracle/product/10.2.0/db/apache/apache/htdocs/emd/main/
what cud be the Problem restared the Apache Server Still the Same Error Found.,
please Help me out in this
thanks alot
Edited by: khaja on Jan 18, 2009 12:48 PM

Hi,
Probably a mistake in your dads.conf file.
( Also check the APEX_PUBLIC_USER in the dads.conf file )
Kind regards,
Iloon

File does not exist: invalid_object_highlight.gif

Dear all -
The Apache logs on our development system regularly get clogged up with entries like this:
[<date>] [error] [client <ip>] [ecid: <-->] File does not exist: <APEX path>/Apache/Apache/images/ob/i/invalid_object_highlight.gif What's happening is that when you browse Views etc. in the Builder (SQL Workshop), APEX looks for this file and can't find it.
The reason it can't find it is that, not only does the GIF not exist in our setup, the folder being referenced doesn't exist either.
Can anyone point me towards the error in our setup that is leading to this situation?
Many thanks,
John

Hi ,
I am new to APEX .
Working on APEX 3.1.1.00.09 version
Please reply me...
null

File does not exist, SMTP permanent error

Hi All,
I got stuck with this error, please help me on this.
Mine is windows OS, apps 11.5.10.2
I have a cocncurrent program out file (.out) in out directory and also the same file with naming convention 'name_concurrenrequestid_1.EXCEL' extension in the same directoy. I need to send this EXCEL file as attachment to email id in windows environment. Whenver submit the request is giving the error.
File Does Not Exist
Error in Send Mail: ORA-29279: SMTP permanent error: 501 5.5.4 Invalid Address.
I verified the file , it is already existed in the directory. Why did it not recognized the file. I tried the below query in toad,, but got the 'FALSE' for %APPLCSF, and got the TRUE for custom directory which has the same file
declare
v_boolean BOOLEAN;
v_Len NUMBER;
v_Block NUMBER;
BEGIN
utl_file.fgetattr('%APPLCSF%\%APPLOUT', 'name_concurrentreuestid_1.EXCEL', v_boolean, v_Len, v_Block);
if v_boolean then
dbms_output.put_line('v_boolean: TRUE');
dbms_output.put_line('L:' || to_char(v_Len));
dbms_output.put_line('B:' || to_char(v_Block));
else
dbms_output.put_line('EX: FALSE');
end if;
END;
I do have full access on this folder. Once it recognizes the file I can send the mail.
Appreciate any help on this. Plz...........
Thanks,
JP

Thank you for the quick reply Srini.
But my email program is working fine if I change the path from %APPLCSF%APPLOUT to Customtop\out directory to identify the file. It was sent the attachment also to my email id.
But my requirement is I need to send the file from Out directory not from customtop out . Even it is not recognized the .out file using this UTL_File.fgetattr() in out directory.
Appreciate any furthur assistance.
Thanks,
JP

Dfsr files does not replicate

Similar Messages

Maybe you are looking for