Diadem 11.0, REPORT, Button "aktualisieren": Erzeugt "Geisterkanäle" in der Listenansicht im Datenportal.

Wenn ich in Diadem 11.0 das Beispiel aus der Beispielgalerie "Beispiel zur Kanaltransformation", welches die "Bit-Extraktion" mittels Kurventransformation beschreibt, lade und in das Gerät "REPORT" wechsele, so wird das ganz normal aufgebaut und in der Listenansicht des Datenportals liegen die beiden Kanäle:
1 Zeit
2 Byte_Kanal
Wenn ich nun den Button "aktualisieren" drücke sieht die Listenansicht so aus:
1 Zeit
2 Byte_Kanal
ausgegraute Zeilen ohne Kanalnummern
Es gibt nach
1 x drücken des Buttons "aktualisieren" 16 ausgegraute Zeilen ohne Kanalnummern
2 x drücken des Buttons "aktualisiern" 32 ausgegraute Zeilen
usw.
Interessanter Weise erzeugt der Befehl "picupdate" aus einem Script oder dem Taschenrechner heraus aufgerufen diese Geisterzeilen nicht nur nicht, sondern löscht diese Zeilen auch, falls zuvor vorhanden.
Das selbe Beispiel führt mit Diadem 10.2 nie zu solchen Geisterzeilen.
Ich finde die Sache mit den Geisterkanälen unschön. Meine Befürchtung aber ist, daß mir derselbe Mechanismus in einer meiner Anwendungen "angemeldete Kanäle" zerschießt.
Daher wäre ich sehr an einer Behebung dieses Verhaltens interessiert.
Meine Fragen:
- kann jemand das Verhalten so reproduzieren?
- kann man dieses Verhalten vermeiden?
- wenn es sich - wie von mir befürchtet - um einen mit 11.0 eingeführten Programmfehler handelt, was ist die Erklärung und wann ist das abgestellt?
Vielen Dank,
Clemens
Attachments:
ghostchannels.jpg ‏498 KB

Hallo Clemens,
Meine Nachfrage an die Entwicklung traff den neuen CAR Eintrag, der nach Ihrer Nachfrage schon aufgeloest war (CAR #129531). Die Entwicklung sagt dass es hier um einen rein optischen Fehler geht-- es bleiben KEINE zusaetzliche Kanaele im Portal uebrig. Mit der Kurventransformation werden neue Kanaele temporaer erzeugt, aber danach sofort geloescht. Die Leer-Kanal-Erscheinung entspricht also etwa keinen neuen Speicherlast. Die Entwicklung sagt weiter, dass sie diesen optischen Fehler mit der naechsten DIAdem Version beheben werden, hoffentlich mit dem naechstem Service Pack.
Gruss,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

SSRS: "View Report" button doesn't refresh parameter dropdowns

So many people have asked similar questions about why SSRS report parameters are not refreshed when "View Report" button is clicked and MSDN simply comes back with an answer "work as designed". It's a bad design, period.
Here is my suggestion to Microsoft team who works on SSRS: either add a "Refresh Parameters" button at the end of the last parameter dropdown so users can force reload the parameter list, or add "Reload
Report" after "View Report" button (which should be re-named "Refresh Report" more precisely) to allow user reload the entire report (as if it was Ctrl-F5 is pressed in I.E.), not just to refresh the main report dataset as "Review
Report" button is currently doing.

Hi Steve Liu,
Thanks for your suggestion and you can also submit this suggestion at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level
of service provided.
Thanks for your understanding
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

Improving graphics performance in DIAdem 11.0 Report?

Dear Forum,
when working on a Report layout, the poor graphic performance of DIAdem is a real problem for me.
For example, many diagrams with lots of data are on one page. One opens the proficiencies of one of the diagrams and changes e.g. the curves color or whatever and closes the dialog window. After this, the whole Report page is refreshed - wich takes up to one minute, depending on the amount of data displayed.
The strange thing is, when I close the given dialog window, and while the report page is being refreshed sent DIAdem to the taskbar and open any other application window, the process of refreshing the screen takes only 1 second instead of 30 seconds.
The question is: Is there a tweak to improve the speed how DIAdem refreshes the report page? Or is there any workaround other than switching applications during refreshing?
Thanks a lot.
Greetings from Germany
Oliver

Hello Oliver,
The easiest way to speed up the graphics performance in Report with large data files (or 3D graphs with lots of nodes) is to turn off the "Data Layer" (German: "Datenebene") in the "View" menu (German: "Ansicht").
That function basically turns off the display of all data in Report, but retains the axis systems, texts, etc., so you can still move them, place them and edit them without having to guess sizes. Once you're done with the report, simply turn the data layer back on and you're ready to create a PDF, print or save the result as an image file (JPG, BMB, etc.).
I think the performance difference you described (1 vs. 30 seconds) is due to the fact that once DIAdem has drawn a page, it retains an image in memory and will simply draw that image when you bring DIAdem to the foreground (or maximize it). After any edits you make to the report (e.g. change the color of a graph), DIAdem redraws the complete page from scratch, which takes much longer then just re-displaying an image that has already been drawn previously. Someone from the DIAdem R&D team could probably do a better job explaining this, but I think this is the explanation for the time difference in drawing.
Anyway, the "Data Layer" trick should hopefully solve your problem, let us know if that works for you.
Greeting from Austin, TX.
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Click a report button to change a report field value

Hello All,
I need to create a report where when a user clicks a report button its image changes and a field relating to that record also changes from "N" to "Y"
I had a look at this Denes's example located on this link
http://htmldb.oracle.com/pls/otn/f?p=31517:133:7078361971556070::NO
The only thing lacking here is the ability to change a record field when the user click the image.
Would it be possible to change the record field value when the function is called ?
Hope this makes sense
Frank

Hi Jing,
I don't think it is easy, here is a sample that allows you to choose the page size and orientation (which are different master pages), Adobe LiveCycle Designer Cookbooks by BR001: Season Planner (or Year Planner) PDF Template
It effectively defines the form against each master page and recalculates the widths and heights when the page selected is made, but I don't know of another way.
Regards
Bruce

Test Report button on report queries

Does anyone know the code/javascript/url behind the test report button on report queries component?
We are having DSN problems using the print url given on the report query. The URL works for some of our developers and not for others.
The test report button on the report query appears to work for everyone but I do not know what is behind the "Test Report" button. If I could recreate the test report button on our page this would be GREAT!
Can anyone help?
Thanks,
Frank

Please see here: {thread:id=2307009}
and here: http://www.oracle.com/technetwork/developer-tools/apex/freq-solved-faq-101785.html - Issue 10.
Please let us know if this helped or if it's something completely different.
Regards,
Howard
Edited by: Howard (... in Training) on Apr 5, 2013 1:18 PM

How to disable "View Report" button in reporting services

Is anyone know how to disable "View Report" button in reporting services, I know can do custom code in report properties, what is the code? I have tried something like this ***button1.enable=false, but it can not success.
Appreciate if anyone can reply me, thanks.

Hi,
The message box don't work on the web because it is of windowform box. Based on your further description, you might want to do the date parameter validation. If so, there is common way to do this:(assume the date parameter value inputed can't be less than 2007)
1) Intert a textbox and input the message used to show the end users if they input a invalidated date value for the parameter, and then set the textbox's hidden property to =iif(Year(Parameters!myPrameter.value) < 2007,false, true)
2) Insert a Rectangle control below the textbox created in step 1, and put all report items in it and set the Rectangle's hidden property to =IIF(Year(Parameters!myParameter.value)<2007,true,false)
After these, if the end users input the date value can meet the project requirement, the report will show the data the end users want, otherwise, the end users will see the error textbox to tell them the parameter value is incorrect.
Hope this help,
thanks,
Jerry

Parameters Unslesct when view report button is pressed

Greetings!,   I'm experiencing a very odd issue with my report. I've created a report that has 3 multi value drop down lists (Location, Program, and Class Standing). I've built all 3 using the same format and
procedures but when I click on select all within all 3 of the parameters and press the View Report button Class Standing and Location unselect all and I'm unable to run the report.Has anyone experienced anything like this before??

Hi Solo01,
According to your description, when clicking on "Select All", some parameter became unselected. Right?
In this scenario, this issue happens when it has space/enter character within parameter. You need to replace them when creating DataSet. Please refer to a similar thread below:
SSRS 2012 multi select parameter not working in
Report Manager
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Spamming has made app reviews pointless and report button no longer works

The app reviews have become useless to me because of all of the spamming. And to make matters worse, the report button no longer works so the spamming posts can't be reported. Who do we contact to report spam?

My guess is that you have a scope problem. By putting the button inside a movieclip you have made the buttons scope the same as that clip.
So if you add a trace inside the release event handler, what do you get?
trace("My current scope is: "+this);
I'm guessing it is "_level0.mc_anim_backdrops_menu," right?
So since you are using the global function of gotoAndPlay() it is looking for that label in the current timeline and not finding it.
You should probably use the MovieClip method and specifiy which timeline it should look in.
_root.gotoAndPlay("Why");
_level0.gotoAndPlay("Why")
_parent.gotoAndPlay("Why");
both would probably work. I would never use the first two, other than to make sure that there wasn't something else going on...

There are a lot of fake apps on app store now.need a report button for them

I think that apple app store for iOS must have a report button for reporting the fake/bad app. there are so many fake purchase apps on store now and people waste their money for those fake apps.there is no email or reporting function to let Apple kill those apps.
thank

or
http://www.apple.com/emea/support/itunes/contact.html

How do I change the numerical format of the axis in Diadem view and report

Is there a method for changing the format of the AXIS labels to show more significant digits? Second, I can't find how to display the menu shown in NI help document 3FIEI5LE. When I right click to (select properties) I get a different menu labeled (set proerties for display).
Thanks,
Doug

Hi Doug,
There is no way to configure the display of the X axis in VIEW-- this is for a quick look at or an interactive visual inspection of your data. For a fully configurable report creation environment you should switch to REPORT. Note that the last button on the top icon bar in VIEW with the tipstrip "Transfer to REPORT" will transfer what you currently have displayed in VIEW into a new REPORT layout.
In REPORT if you double-click on the numbers below the X axis, a "2D - Numeric display" configuration dialog will appear which has the field "Format:" in it. Type in "d.dddd" ("d,dddd" in Europe) or as many d's after the decimal character as you want to display. There are also other formatting options for scientific display, etc.
I honestly didn't understand your second question about the help dialog-- what version of DIAdem are you using?
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Difference between diadem and LabVIEW Report Generation Toolkit

I want to expand LabVIEW's reporting capabilities. Can someone tell me what the difference is between DIAdem and the LabVIEW Report Generation Toolkit for Microsoft Office.

Hello Mr Bean,
There are several major differences between the two solutions. I'll try and outline them as good as I can ...
The biggest different is that LabVIEW and its toolkits are programming tools and DIAdem is a ready to run application.
The LabVIEW Report Generation Toolkit basically provides an extensive library of VIs that allow you to connect LabVIEW to the MS Office library and create and edit reports in Word and Excel.
DIAdem is a stand alone application that was designed to post-process data from various sources. The tools included in DIAdem are:
1. NAVIGATOR: Allows you to import data from files (ASCII, binary, Excel, etc.) as well as DataBases (SQL/ODBC, Citadel, ASAM, etc.). The unique DataPlugin technology available within DIAdem allows you to import vitually and data file by creating a DataPlugin that describes the data format and gets linked to DIAdem. More information at: http://www.ni.com/diadem/dataplugins.htm
2. VIEW: Graphical and Numerical data inspection tool. Use cursors to zoom and scroll through your data, edit your data graphically and numerically and compare different tests.
3. ANALYSIS: DIAdem has a wide range of analysis functions, ranging from simple functions like integration and differentiation to FFTs, Order analysis and 3D data analysis.
4. REPORT: The DIAdem REPORT tool allows you to create reusable report layouts that can contain multiple axis systems (2D, 3D and polar plots) as well as tables (2D and 3D) and variables. The REPORT tool generates templates that can be usedwith multiple data sets due to the inclusion of automatic (or manula if required) scaling as well as extensive use of variables for annotations. Finished reports can be exported to printers, graphics files, the Windows Clipboard, HTML pages and PDF files (PDF writing is build into DIAdem, no extra software required). Using Scripts, it is also possible to create Word, Excel or Powerpoint reports from DIAdem automatically.
5. SCRIPT: The DIAdem scripting tools allows users to record macros or write scripts that automate complete sequences, for the import of data, via extensive analysis, to creating a publication ready report. Scripts can make reports "intelligent" by modifying the appearance of a report based on the data or calculation results that are going to be displayed in the report.
I recommend you check out the following link for more information: http://www.ni.com/diadem/
DIAdem is an extremly powerful tool for report generation. I am leaving to go on a business trip to Asia, but I would be more than happy to give you an Web presentation on DIAdem after I have returned. We could use your data and create a DIAdem report Script together online. My Email address is [email protected] and I will be back the week of Thanksgiving.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

A "view report" button in a jsp

Hi - I have a jsp page that produces a summary of results - I want to add a button that the user can click on to view a print friendly detailed report.
I want to be able to pass alot of details from the summary jsp to the new detailed report but I'm not sure how to go about it. I'd like to pass the data as Vector's or multidimensional vectors.
I want a button - but I've only ever used buttons with forms - do I need to turn the summary jsp into a form in order to pass the data? If I do use a button in a form with a bean - am I restricted to Strings or arrays of strings?
I guess I'm asking the simplest way to implement this - one jsp passing data to another jsp (via vectors) if a button is pushed without making one huge href link full of vector data.
Thanks

Hi - I tried the method above but it (JSP1) is passing nul values to the jsp (JSP2) - though the variables I'm setting in the first JSP(JSP1) are not null.
I'm wondering if it has anything to do with the fact that JSP1 starts out by getting a vector from a servlet that has forwarded to the JSP1 - so JSP1 starts out with this line:
<%
 Vector results = (Vector)request.getAttribute("tests");
 %>then a summary is created and displayed to the user - at the bottom on this summary I have a button which takes alot of the information from the summary to put in a detailed report (the information that is being passed as null currently)
I have enclosed it in a form so the request goes to JSP2 like so:
<form name="resultreport" action="report.jsp" method=post>so that means the bottom of JSP1 looks like this:
 request.setAttribute("totals", totals);
 request.setAttribute("pass_count", pass_count);
 <input type="submit" value="View Report">then JSP2 just looks like this at the moment:
<%
 String[] totals = (String[]) request.getAttribute("totals");
 String pass_count = (String) request.getAttribute("pass_count");
%>
length of array is <%=totals.length%> 
passcount is <%=pass_count%>
 So I guess my question is - is the problem that JSP1 already calls the request object to get an attribute right at the beginning - then me setting request attributes and sending them to another jsp messes it up and results in nothing being sent? or is it ok to get the request object from another servlet - access attributes then set new attributes and send them to another jsp?

Drill down report buttons in browser

i have a report that does some 'rollup' statistics. beside each 'rollup' record i have a button that gives me details per 'rollup'. this works fine in client/server but when i try to 'intranet enable' this functionality i can't get the buttons to 'activate.' they merely appear as images that cannot be 'clicked.'
can someone help me out please??
null

Hi Srini thanks,
Also I need to capture the particular days in month report like year(2002)-----month(feb2002) ----- day (1-Feb-2002) in day level rep with prompt...
Thanks in Advance

Report button - "Org. Structure" - behaves strangely

Hi
In one of our systems this button (sy-ucomm = "$ORG") does only work properly every 5 times you hit it!? In the other systems it works alright. And yes it is the same code base and patch-levels etc It is the same problem for all our reports in this system. I cannot find any SAP-note/forum discussion regarding the problem.
When I debug through the code I get to the conclusion that the problem appears in a c-system-call ("C_TRADR") in the FM GRAPH_RECEIVE.
We have tried an application server restart without luck (it is a windows machine so it was worth a try
I looks like a system ressource problem, but I do not know where to look. Perhaps someone have had similar problem? Maybe a wrong instance profile parameter?
All help/ideas are more than welcome
Peter Michael

on that level - I would also consider the frontend installation - although this does not explain why it would work on other systems...
christian

Diadem 11.0, REPORT, Button "aktualisieren": Erzeugt "Geisterkanäle" in der Listenansicht im Datenportal.

Similar Messages

Maybe you are looking for