Diag log results 305, 1/4/2015 & 60, 8/9/2913 any ideas. helpplz

Diag logs 0305 & 0601?

Hi @jc1mtnns ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq Presario CQ60 Notebook and issues. You could try Windows 7: SFC /SCANNOW Command - System File Checker select start and type cmd - then run type sfc /scannow
This will scan your Notebook for errors. You could also check with the HP System Health Scan tool.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Let us start with couple of questions:
Have you made any changes on your computer prior to the issue?
When exactly do you receive this error message?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

My Apple TV 6.1.1 is logged into iCloud but says it's not when I try to log into using Photo Stream as my screen saver. Any ideas?

When I select Photo Stream as my screen saver, it prompts me for the password. Despite the password working for logging into iCloud and iTunes Music Store, it always says it's incorrect for Photo Stream. Help!

Eric,
None of this has worked.
My Apple ID and password work with everything else. I have a good Internet connection. No Firewall active from my IMac.
LIke I said, I haven't installed anything recently and FaceTime ver. 1.0.5 on OS X 10.6.8 was working fine prior to yesterday.
I restarted my IMac to run Mavericks and FaceTime 3.0 under OS X 10.9.4 is working and I was able to login and use FaceTime on Mavericks with no problem.
For some unknown reason FaceTime on IOS and on my Mac were asking me to login into FaceTime when I haven't had to do this for quite sometime.
Older FaceTime 1.0.5 all of a sudden has decided to be a problem with login on my IMac under Snow Leopard.
The only thing left I am going to try is the two-step Apple ID verification process where I can use a app specific password, but Apple makes you wait three days before completing the two-step verification.
If this doesn't work, then I do not know what will solve this issue and now I made my Apple ID login process more complicated than I really wanted it to be.
I purposely stayed away from using the two-step ID verification login.

For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

I have wifi in my home and it has always worked fine. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in the house. I took it to another location where I have logged in before and it worked perfectly. Any ideas?

I have wi-fi in my home and it has always worked fine with my iPad. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in my house. I can't get my wi-fi connecton. I took it to anothe location where I have logged in in the past, and it worked perfectly. Any ideas as to why I can't get a connection at home?
Thank you.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Best practices for logging results from Looped steps

Hi all
I would like to start a discussion to document best practices for logging results (to reports and databases) from Looped Steps
As an application example - let's say you are developing a test for one of NI's analog input or output cards and need to measure a voltage across multiple inputs or outputs.
One way to do that would be to create a sequence that switches the appropriate signals and performs a "Voltage Measurement" test in a loop.
What are your techniques for keeping track of the individual measurements so that they can be traced to the individual signal paths that are being measured?
I have used a variety of techniques such as
i )creating a custom step type that generates unique identifiers for each iteration of the loop. This required some customization to the results processing . Also the sequence developer had to include code to ensure that a unique identifier was generated for each iteration
ii) Adding an input parameter to the test function/vi, passing loop iteration to it and adding this to Additional results parameters to log.

I have attached a simple example (LV 2012 and TS 2012) that includes steps inside a loop structure as well as a looped test.
If you enable both database and report generation, you will see the following:
1) The numeric limit test in the for loop always generates the same name in the report and database which makes it difficult to determine the result of a particular iteration
2) The Max voltage test report includes the paramater as an additional result but the database does not include any differentiating information
3) The Looped Limit test generates both uniques reports and database entries - you can easily see what the result for each iteration is.
As mentioned, I am seeking to start a discussion for how others handle results for steps inside loops. The only way I have been able to accomplish a result similar to that of the Looped step (unique results and database entry for each iteration of the loop) is to modify the process model results processing.
Attachments:
test.vi ‏27 KB
Sequence File 2.seq ‏9 KB

My MacBook Pro is running very slow. I've run repair permissions without positive result. Does anyone have any ideas?

My MacBook Pro (2010) is runnign very slow. This came on all of a sudden. It opens, closes, reboots, etc., all much slower than ever before. I have used the repair disk permissions without any positive result. Does anyone have any ideas?

First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

HT1222 My internet speed has slowed to a crawl after installing security update 2015-003. Any ideas on how to fix?

I have a mini mac with 8GB ram and running yosemite OS. I recently installed security update 2015-003 and now my internet connectivity have slowed to a crawl. sometimes if I turn wi-fi off and then back on the speed returns to normal but sometimes it does not. Any ideas what may be causing the slow internet speed?

Please check the speed of your connection on this site.
Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results.

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core

1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results.

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.

I am trying to download an album from ITUNES and I keep getting a "session has timed out" message with no further option but to try again. I get the same results. Anyone have any ideas?

I am trying to download and album off ITUNES but when I get to the billing site and attempt to purchase it, it gives me a message saying "Your Session has timed out." It gives me no other option that to try again and I just keep getting the same results. Anyone have any ideas on what I can do?

Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

OS 10.8 just installed. "Hot Corner" to put new iMac 2.7 GHz Intel Core i5 to sleep mode doesn't work. Have tried cordless and corded mouse with same result. Momentary sleep, immediate wake. Any idea how to fix?

Set "hot corner" to put iMac to sleep. Doesn't work. Selecting the corner will momentarily put to sleep, but immediately rewakes. Have tried all four corners with same result. Have tried with wireless mouse and with corded mouse with same result. Any ideas as to how to fix?

You've been so great, I want to thank you for all the help over a very frustrating day. Last evening, I redownloaded and installed the fresh copy of Mountain Lion. The problem remained. After installing the new OS 10.8, any clicks on a web page (Firefox browser) didn't open the page, but instead made a copy of the page on the desktop. Felt it must be hardware degrading, so I set up a case with Apple support for today. Early in the diagnostics, I had swapped out for a corded mouse and the problem remained. As a last try, I changed out my wireless mouse for a different wireless mouse. That seems to have done the trick. My Logitech mouse is incompatible with OS 10.8.
Thank you again, so much!
.../awards rkaufmann87 500 points!

Why is my internet search page gray? I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond. Any ideas?

Why is my internet search page gray? I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond. Any ideas?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT5622 After the os upgrade I can no longer log in with my Ipad to itunes or the app store, I can log in with my computer just fine any ideas?

Nothing that requires and Apple ID or a password works, the WIFI, browser adn facebook all still work just the Apple stuff will not work. It repeately ask me to sign in. It works just fine on the desktop I can log in a buy stuff even transfer it to theI pad with a cable. But the I pad acts like it has been isolated by the os upgrade. Any Ideas on how to fix this?????

Try logging out of your Apple ID with the iTunes and App Store at Settings > iTunes and App Store. Select your Apple ID and at the window that appears, select Sign Out. Follow this by signing back in.
Regarding the Outlook password which is the password for the email account you are also accessing with the iPhone's Mail app, try deleting and recreating the account on the iPhone.

Diag log results 305, 1/4/2015 & 60, 8/9/2913 any ideas. helpplz

Similar Messages

Maybe you are looking for