Dialog in View

Hallo liebe Gemeinde,
ich suche ein gutes Beispiel wie ich ein Dialog in View funktionsfähig verwenden kann verwenden kann.
Leider hab ich bisher dazu nichts passendes gefunden. Könnte mir da jemand ein gutes Tutorial schicken?
Mit besten Grüßen
Kevin

Hi Kevin,
What do you have in mind? Do you want a floating dialog, or a dialog that is docked in a VIEW area? Are you talking about a passive status/result display dialog, or do you want an active dialog with buttons and fields that the user can click on?
What DIAdem version do you have? Do you not see the example "User Dialog Box in DIAdem VIEW"?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

Always prompted with Save As Dialog when viewing dashboard

Post Author: jgagarin
CA Forum: Performance Management and Dashboards
Hi,
We are having problem viewing dashboard which contains Xcelsius document. In our development server we were able to view all dashboards with embedded Xcelsius document but when we move it to our production server it shows different output. Everytime we try to view the dashboard it keeps on prompting a "Save As Dialog" instead of showing the Xcelcius file. I really have no idea on what to do next, please help.
Thanks,
Jag

Post Author: amr_foci
CA Forum: Performance Management and Dashboards
its an issue of macromedia flash player, if you already installed it on ur machine, remove it and reinstall the last version from the macromedia website thenrestart your mcahine.
good luck

File Dialog (Details View and Multiple Selections for View File Type)

I would like to use the generic windows dialog box found in the toolbar under:
File I/O/Advanced File Functions/File Dialog
What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.rtf, another is *.csv, etc. Listing a single type is straightforward.
Also does anyone know if there is a way to have the dialog open in the DETAILS view automatically?
Thanks for any help!
Carlton

Hi,
You can do it in following ways:
1. Write in pattern input the string "*.txt; *.csv; *.rtf". This will show to the user only files with this extensions in the dialog.
2. Another way is to create ring or menu where user could specify the extension. Depending on this extension you could wire the appropriate string to the pattern input of "File Dialog.vi"
I have made an example.
Good luck.
Oleg Chutko.
Attachments:
fileopen.vi ‏42 KB

Popup dialog data viewing

I'm reading Hex data off a serial port with VISA including some GPS LAT/LON and Altittude data.
The data is extracted and sent to my GUI, updating indicators with the information.
I'd like to provide a button that causes a dialog window to open on top of the GUI and view the incoming raw data if desired by the user.
Is this possible?

Sure. Just create a new VI and set it to Dialog in the VI properties under "Window Appearance". Now you only have to transfer the incoming data to some kind of indicator on that new VI. There are multiple options available. One would be a notifier to send the new incoming data from the receiver to the dialog.

SelectInputDate+dialog=No view has been pushed

Hello all,
On jspx, I have af:selectInputDate component and af:commandButton which invoke a my dialog page. I return from the dialog in a method linked to a button’s actionListener using following fragment of code:
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.getCurrentInstance().returnFromDialog(attr, null);
If I click selectInputDate and then click dialog button then when I trying to return from the dialog I get error:
popView(): No view has been pushed
on the line:
afContext.getCurrentInstance().returnFromDialog(attr, null);
If I do not click calendar the dialog works fine.
Thanks,
SNikiforov

Frank,
Sorry for thread jacking. But I might have a similar issue, the value that I'm trying to modify is within a dialog and a dropdown LOV.
ADF Faces & BC: Issue with updating a composite key and ReturnEvent
If I do a try/catch in my dialog's save method, I also get a no view been pushed exception.
What causes this? Are there any known workarounds?
Wes

How I change the save image dialog box view from oldest to newest first as the default?

My save image dialog box has the oldest file in the folder in the upper left position (using list). I want to change it to the newest file shown first. It used to be that way, but now it showing oldest first. I haven't found any guidance on defaults for this box. Thanks.

Leave it to Apple. When I first got the phone, that's the way they were configured. Now that they've flipped around, there's now way to change it!

Dialog in View einbinden

Hallo Zusammen,
ich habe Problme einen Userdialog in den VIEW-Modus mit ein zu binden. Meine Vorstellung wäre, dass man wie in den Beispielfiles durch klicken auf einen Button ein Ereignis auslöst.
Meine Vorgehensweise:
1. Erstellen Userdialog
2. Erstellen Layout-Datei
3. Erstellen Skript
WndShow("VIEW")
B1=View.LoadLayout("C:\Users\....\VIE-Layout")
-------------hiermit konnte ich ohne Probleme das Layout aufrufen mit eingebetteten Userdialog----------------
if L1 =1 then
scriptstart("C:\Users\.....\Einleseprogramm_neu")
end if
Bem: Die Variable L1 habe ich mit meinen Button im Userdialog verlinkt. Wenn ich die ersten zwei Zeilen weglasse, und stattdessen meinen Userdialog mit Call SUDDlgShow aufrufe, funktioniert das Programm einwandfrei.
Vorab besten Dank für eure Unterstützung!
<script src="ms-its:diadem.chm::/FeedbackLink.js" type="text/javascript" language="JavaScript1.2"></script>
<script src="ms-its:diadem.chm::/variables.js"></script>
<script src="/t5/forums/postpage/submitted/true/choose-node/pdf.js" type="text/javascript"></script>
<script src="ms-its:diadem.chm::/expand.js" type="text/javascript" language="JavaScript1.2"></script>
<script src="ms-its:diadem.chm::/web.js" type="text/javascript" language="JavaScript1.2"></script>
<script src="ms-its:diadem.chm::/Tools.js" type="text/javascript" language="JavaScript1.2"></script>

Hi Brad,
youo find the other post here.
Kind Regards,
Philipp

Run script from view dialog box

I built a dialog box that I would like to have in the View area. Is it possible to have one of the dialog box's button load a script while staying in VIEW panel?

Hey BG103,
just use ScriptStart function in your SUD dialog. If you want to work in VIEW after your script started you can start an interaction
For example you can create a SUD dialog with two buttons: Start Interaction / Stop Interaction and define click events like this:
Sub ButtonStartInteraction_EventClick(ByRef This)
call ScriptStart(CurrentScriptPath & "StartInteraction.vbs")
End Sub
Sub ButtonStopInteraction_EventClick(ByRef This)
call InteractionOff()
End Sub
StartInteraction.vbs looks like this:
Call WndShow("VIEW", WndMode)
Call InteractionOn()
You can integrate the SUD dialog in VIEW using a View connector in your SUD dialog.
Regards
Christian

ADF BC View Objects: Disappearing where clauses

Playing around with the 11g Technical Preview I find out that sometimes the where clauses - added to View Objects by means of the new "Join Type" field in the VO-editor UI - disappear.
I'm not able to reproduce exactly and "on demand", but it seems to happen when the sources of more than one View Object are open simultaneously and/or the XML definition of a View Object is edited directly on the Source-tab.

Today I succeeded in reproducing:
Two tables:
TAB_MASTER:
ID NUMBER NOT NULL
DESCRIPTION VARCHAR2 NOT NULL
TAB_DETAIL:
ID NUMBER NOT NULL
MASTER_ID NUMBER NOT NULL
DESCRIPTION VARCHAR2 NOT NULL
TAB_DETAIL.MASTER_ID is a foreign key referencing TAB_MASTER.ID.
Steps to reproduce:
1. Generate default ADF BC objects from database tables.
2. Open definition of TAB_DETAIL View Object.
3. Go to the Entity Objects tab
4. Add TAB_MASTER Entity Object to the Selected Entities Objects. Association and Join Type are filled in automatically.
5. Go to the Query tab and go to SQL tab in de Property Inspector. Where clause is filled.
6. Go to the Attributes tab and click Add from Entity...
7. Add TAB_MASTER.DESCRIPTION attribute.
8. Again, go to the Query tab and go to SQL tab in de Property Inspector. Where clause is still filled.
9. Go to the Attributes tab and select MASTER_ID attribute.
10. Click icon to add List Of Values
11. In List Of Values dialog add View Object TAB_MASTER and add the correct pairs of List Return Values for the ID and (MASTER) DESCRIPTION attributes.
12. After completing the List Of Values dialog go to the Query tab -> SQL tab again. The where clause added to join the Entity Objects (see step 5.) is cleared, resulting in a wrong SQL statement for the View Object.

View Source not showing up in context menu?

Yes I did choose to allow view source during the release
build. I also uploaded the source folder to the server. I can
manually go to the view source folder and it is working fine, only
thing is, the option is not in the context menu of the application.
I suppose I can add it there myself but I thought that was
automatic?
Thanks!

quote:
Originally posted by:
levancho
if you are using FB3 you can you feature called : "Export
Project" and it does everything for you, including view Source
Feature,
just select your project and then click on Project -->
Export Project
and in dialog select "View Source" and then finish.
That is exactly what I did, I go to Export Release Build, I
select View Source, I choose which files to show, I name what
directory I want it to be in. I click Finish, Then I upload
everything from the release-bin to my server. I can manually go to
the view source URL and that works, but the option does not appear
when I right click the .swf. But as a work around I can add the
option to the context menu myself and use navigateToURL to send the
user there.

When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?

When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?

You want to view the image at the Print Size, which represents the size that shows in the Image>Resize Dialog.
View>Print Size
Since screen resolution is almost always lower that the print resolution (somewhere between 72 and 96 usually), images will always look bigger on the screen, unless you view them at print size.
(apple Retina displays have a much higher resolution than normal screens, closer to the average print size resolution)
more info:
Photoshop Help | Image size and resolution

Display confirmation dialog when opening PDF

I've been asked to add a confirmation dialog box to a PDF file that includes a legal disclaimer. The dialogue box would display when opening the pdf document and include yes and no buttons to confirm that the user understands and accepts the disclaimer before reading the document. Selecting "Yes" would allow them to proceed, while selecting "No" would close the file. Is it possible to create something like this in Acrobat? I'm running Acrobat Standard 8.
Thanks,
Eric

Hi Eric,
Yes, you can do that but it's not an easy task. You need to code the dialog in JavaScript and then use OCGs (layers) for a cover sheet that will remain "on" until the user selects the Yes button in the dialog. Coding the dialog is a major task to do by hand and I'm not sure if Acrobat 8 Standard has the OCG capability.
Check out our tool AcroDialogs(http://www.windjack.com/products/acrodialogs.html) for making dialog creation about 100 times faster and easier, and there is an example of a license dialog agreement just like what you are asking for on that page- scroll down to the Document License Dialog Example. But again, that solution was developed with Acrobat Professional and I'm not sure if Standard handles OCGs or not- you'll have to check on that.
Also keep in mind this is by no means a foolproof security methodology. However, it does provide a way to ensure the user agreed to the dialog before viewing the rest of the content.
Hope this helps,
Dimitri
WindJack Solutions
www.windjack.com
www.pdfscripting.com

I am not able to login to the Management Server from the Management Server dialog from FlexBuilder

hi,
I am trying to setup the flex builder project for the demo host sample and am running into issues with the login. I have my OEM setup in https://<ip-address>:7801/em and am able to login with the credentials. Now, when I try to launch the HostSample.html from the flex builder project and the details are provided to my Management Server dialog, the same credentials fail with some IO Error. Please help
Error during operation: Logging in to Management Server
[FaultEvent fault=[RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032"]. URL: https://10.105.219.188:7801/em/websvcs/mpws/LoginService"] messageId=null type="fault" bubbles=true cancelable=true eventPhase=2]
The LoginService.login is failing.
Here is the Item details
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Header>
    <ns0:TraceRequest xmlns:ns0="http://em.oracle.com/tracing/xsd">
      <ns0:ecid>15D0C25A-51F9-B29F-EC74-DDD780ACCCEE</ns0:ecid>
    </ns0:TraceRequest>
    <ns1:RslVersion xmlns:ns1="http://em.oracle.com/auth/xsd">
      <ns1:rslVersion>12.1.0.3.0</ns1:rslVersion>
    </ns1:RslVersion>
    <ns1:InternalToken xmlns:ns1="http://em.oracle.com/auth/xsd">
      <ns1:intToken>secret-token</ns1:intToken>
    </ns1:InternalToken>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
    <tns:loginRequest xmlns:tns="oracle.sysman.emx.LoginService">
      <loginInfo>
        <username>sysman</username>
        <password><my password text in plain text format></password>
        <role xsi:nil="true"/>
      </loginInfo>
    </tns:loginRequest>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>

When running with HTTPS, FlexBuilder enforces security restrictions on same domain policy and verifies security certificate. To workaround this you either have to disable security on your OMS and use HTTP for your development (using emctl secure unlock), or you have to install the security certificate from your OMS in the IE browser you are launching from FlexBuilder.
To install the certificate in Firefox: go to the EM website using Firefox, and you will see "The Connection is Untrusted", expand "I Understand the Risks" and click "Add Exception". On the dialog that appears leave all the defaults and click "Confirm Security Exception". At that point if you close/reopen the browser you can go back to the EM website and you should see no security exception.
To install the certificate in IE: go to the EM website using IE and you should see "There is a problem with this website's security certificate", click "Continue to this Website (not recommended)", the address bar will then change to show "Certificate error" on the right side of the URL. Click that icon and the "View certificates" on the "Untrusted Certificate" popup. On the dialog that appears, click the "Certification Path" tab, then click the root node (root certificate) in the path and click "View Certificate". In the new dialog that appears, click "Install Certificate...". Then click "Next>", click "Place all certificates in the following store", click "Browse..."., select "Trusted Root Certification Authorities" and click "OK". Then click "Next>" and click "Finish". On the "Security Warning" dialog, click "Yes" to install the certificate and then "OK on the confirmation dialog. Click "OK" on the "Certificate" dialog (there should be two) that was launched to install the root certificate. Now on the original "Certificate" dialog click "View Certificate". Then click "Next>", click "Place all certificates in the following store", click "Browse..."., select "Trusted Root Certification Authorities" and click "OK". Then click "Next>" and click "Finish" and then "OK on the confirmation dialog. Click "OK" and "OK". At that point if you close/reopen the browser you can go back to the EM website and you should see no security exception.

System log viewer

Hi folks,
I have change/transform an old shell script for archlinux :-)
I consider anyone newbie find it useful...
Here is a screen shot
and the Download link
#! /bin/sh
# Archlinux and other minor changes Dec 13, 2006
# by Constantinos Laitsas
# dl: http://laitsas.com/download/logview.txt
# logview by Luke Th. Bullock 1997
# Minor changes Wed Feb 11 02:33:29 GMT+1 1998
# added f_logview function Tue Apr 4 15:47:06 MEST 2000
# Removed some sections, added others due to system changes.
f_logview() {
dialog --backtitle "User: `whoami` | Kernel: `uname -mnspr`"
--title "System Log Viewer"
--menu "Make your selection:" 19 45 12
"WWW" "Web traffic log"
"Error" "Web Error Log"
"Mail" "Mail log"
"Last" "Last 50 connections"
"Messages" "System Message log"
"Syslog" "System Log"
"Pacman" "Pacman log"
"Kernel" "Kernel Log"
"PostgreSQL" "PostgreSQL log file"
"MySQL" "MySQL log file"
"Xorg" "Xorg log file"
"Exit" "Exit Viewer"
2> ~/.syslogs
if [ $? = 1 -o $? = 255 ]; then
echo "Exit" > ~/.syslogs
fi
LOG="`cat ~/.syslogs`"
TMP="/tmp/.tmpfile"
if [ "$LOG" = "Exit" ]; then
reset
exit
fi
if [ "$LOG" = "WWW" ]; then
VIEW="/var/log/httpd/access_log"
fi
if [ "$LOG" = "Error" ]; then
VIEW="/var/log/httpd/error_log"
fi
if [ "$LOG" = "Mail" ]; then
VIEW="/var/log/mail.log"
fi
if [ "$LOG" = "Last" ]; then
last -50 > $TMP
VIEW="$TMP"
fi
if [ "$LOG" = "Messages" ]; then
VIEW="/var/log/messages.log"
fi
if [ "$LOG" = "Syslog" ]; then
VIEW="/var/log/syslog.log"
fi
if [ "$LOG" = "Pacman" ]; then
VIEW="/var/log/pacman.log"
fi
if [ "$LOG" = "Kernel" ]; then
VIEW="/var/log/kernel.log"
fi
if [ "$LOG" = "PostgreSQL" ]; then
VIEW="/var/log/postgresql.log"
fi
if [ "$LOG" = "MySQL" ]; then
VIEW="/var/log/mysqld.log"
fi
if [ "$LOG" = "Xorg" ]; then
VIEW="/var/log/Xorg.0.log"
fi
dialog --title "Viewing file: $VIEW"
--textbox $VIEW 25 80
if [ -f $TMP ]; then
rm $TMP
fi
f_logview
f_logview
# End

looks pretty nice, but I still prefer
vi /var/log/Xorg.0.log
But thats just me.

Tiny open dialog icons in Photoshop

I recently migrated from PC to Mac and although I love the conversion, there is one thing that I'm hoping there is a solution for: I work in Photoshop extensively and when I have the Open dialog box open, my thumbnails are very small. I don't see any way to make them bigger.
Sometimes I want to take a quick look at a couple dozen similar thumbnails at a glance (without having to press the spacebar for a one-at-a-time Quick View, or using one of the alternate dialog box views which also only show one at a time.)
Is anyone aware of how I can fix this in Mavericks, or if there is a plug-in available that will allow application open dialogs to default to whatever size I have my Finder icon size set at?
Thanks so much for any input!!

Instead of using Opem, you can use "Browse in Bridge" This will open Adobe Bridge wich works a lot better for what you want to do.

Dialog in View

Similar Messages

Maybe you are looking for