Did not realize init() exception thrown by servlet FacesServlet

Dear Programmers
I have written a little application using JSF. It works fine on my machine (I use WSAD) but when I deploy it to the server I get the exception:
[08:47:55:656 IST 06/10/05] 39b61791 ServletInstan E SRVE0100E: Did not realize init() exception thrown by servlet FacesServlet: javax.servlet.ServletException
     at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:99)
     at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
     at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
     at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
     at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
     at javax.servlet.GenericServlet.init(GenericServlet.java:258)
     at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
     at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
     at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
     at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1272)
     at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:277)
     at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:400)
     at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:218)
     at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:1004)
     at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
     at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:415)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:808)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:351)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:578)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:268)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:485)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.tivoli.jmx.modelmbean.MMBInvoker.invoke(Unknown Source)
     at com.tivoli.jmx.modelmbean.MMBInvoker.invokeOperation(Unknown Source)
     at com.tivoli.jmx.modelmbean.DynamicModelMBeanSupport.invoke(Unknown Source)
     at javax.management.modelmbean.RequiredModelMBean.invoke(Unknown Source)
     at com.tivoli.jmx.GenericMBeanSupport.invoke(Unknown Source)
     at com.tivoli.jmx.MBeanAccess.invoke(Unknown Source)
     at com.tivoli.jmx.MBeanServerImpl.invoke(Unknown Source)
     at com.ibm.ws.management.AdminServiceImpl.invoke(AdminServiceImpl.java:658)
     at com.ibm.ws.console.core.mbean.MBeanHelper.invoke(MBeanHelper.java:141)
     at com.ibm.ws.console.appdeployment.ApplicationDeploymentCollectionAction.perform(ApplicationDeploymentCollectionAction.java:315)
     at org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1791)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1586)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java(Inlined Compiled Code))
     at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java(Inlined Compiled Code))
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java(Compiled Code))
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java(Compiled Code))
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java(Compiled Code))
     at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:80)
     at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:214)
     at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
     at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:116)
     at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
     at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
     at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
     at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:615)
     at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java(Compiled Code))
What does it mean???
How can I solve the problem?

Cross-post
http://forum.java.sun.com/thread.jspa?threadID=683318&tstart=0

Similar Messages

Exception thrown by servlet Faces Servlet in WAS ND 6.1.0.13

Hi, 
I'm using WebSphere Application Server Network Deployment (WAS ND) v. 6.1.0.13. 
I'm getting this error when I try to launch my application: 
[1/24/08 11:41:44:100 WET] 0000003c ServletWrappe E SRVE0100E: Did not realize init() exception thrown by servlet Faces Servlet: java.lang.NullPointerException 
at javax.faces.webapp.FacesServlet.init(FacesServlet.java:144) 
at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:190) 
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:317) 
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:346) 
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464) 
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3276) 
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:267) 
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811) 
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1455) 
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:113) 
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:454) 
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:383) 
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102) 
at com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$SSLReadCompletedCallback.complete(SSLReadServiceContext.java:1818) 
at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:556) 
at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:606) 
at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:979) 
at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1064) 
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469) 
 
After doing a search I tried this following steps: 
� Delete the entry in web.xml: 
<listener> 
<listener-class> 
com.sun.faces.config.ConfigureListener 
</listener-class> 
</listener> 
� Update my log4j version 
� Delete the commons-logging.jar from WEB-INF directory 
These are the jar files included in WEB-INF directory: 
commons-beanutils.jar 
commons-collections.jar 
commons-digester.jar 
commons-javaflow-20060411.jar 
commons-logging.jar 
FglConnectorClient.jar 
itext-1.4.2.jar 
jasperreports-1.2.3.jar 
jcommon-1.0.0.jar 
jfreechart-1.0.1.jar 
jsf-api.jar 
jsf-ibm.jar 
jsf-impl.jar 
jstl.jar 
log4j-1.2.14.jar 
standard.jar 
struts.jar 
 
 
None of the suggestions worked. 
Then I tried to deploy my application in another WAS ND 6.1.0.13 and it worked!!! 
What can I do so solve this problem in my WAS ND 6.1.0.13? What could be the problem? 
Thanks, 
Nuno

Did you find a solution to this problem
please help
Thanks & Regards
Nasir

HT201441 Hello , my name bonilla astrid buy an iphone from a vendor and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you

Hello , my name bonilla astrid buy an iphone 5 from a seller and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you very much .

Sorry, without knowing the Apple ID/Password that was originally used to activate this phone, then there is no way to re-activate it, as you've found out.
Apple can't/won't help you. Your choice is to get this info, or you simply won't be able to re-activate this phone.
If you ex won't give it to you, then consult a lawyer.

I did not realize Ilife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
The following is from iCloud: Photo Stream FAQ
Can photos be saved or downloaded from a shared photo stream?
Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
This tells me that the image files are not on the HD unless the subscriber chooses to download them.

HT2105 I have several purchas's my grandson made the I did not realize were so high and would like to remove them

My grandson made some purchases I did not realize were so high he had $25.00 in I Tunes cards but he went over that limit and I did not realize it.the purchases were on 2/1/2014 and 1/30/2014. I would like to have them removed and the updates removed if possible.

It's not currently possible to merge accounts, nor to transfer content from account to another account - content will remain tied to the account that originally bought/downloaded it.

OdiStartScen threw "The scenario did not end properly" Exception

Hello,
I tried to use ODI to do the "CDC", but OdiStartScen, which i used to start the scenario continually, threw "The scenario did not end properly" Exception at the end of process of my package. The process is "OidWaitForLogData --> extend window --> interface --> purge window --> OdiStartScen";
java.lang.Exception: The scenario did not end properly.
     at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
OdiStartScen "-SCEN_NAME=JOURNALIZEPACKAGEDEMOSCEN" "-SCEN_VERSION=002" "-CONTEXT=GLOBAL" "-LOG_LEVEL=5" "-SYNC_MODE=1" "-ODI_USER=SUPERVISOR" "-ODI_PASS=d,yXgLJMwXJsIhe0qMX.X9PPn"
Does anyone have an idea of what is the problem ?
regards

(From ODI user's guide/MODEL/ Change Data Capture)
Using Changed data in Consistent journalizing is similar to simple journalizing regarding interface design. It requires extra steps before and after processing the changed data in the interfaces, in order to enforce changes consistently within the set.
Operations Before Using the Changed Data
The following operations should be undertaken before using the changed data when using consistent set journalizing:
Extend Window: The Consistency Window is a range of available changes in all the tables of the consistency set for which the insert/update/delete are possible without violating referential integrity. The extend window operation (re)computes this window to take into account new changes captured since the latest Extend Window operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from other journalizing operations.
Lock Subscribers: Although the extend window is applied to the entire consistency set, subscribers consume the changes separately. This operation performs a subscriber(s) specific "snapshot" of the changes in the consistency window. This snapshot includes all the changes within the consistency window that have not been consumed yet by the subscriber(s). This operation is implemented using a package step with the Journalizing Model Type. It should be always performed before the first interface using changes captured for the subscriber(s).
Designing Interfaces
The changed data in consistent set journalizing are also processed using interfaces sequenced into packages.
Designing interfaces when using consistent set journalizing is similar to simple journalizing, except for the following differences:
The changes taken into account by the interface (that is filtered with JRN_FLAG, JRN_DATE and JRN_SUBSCRIBER) are not automatically purged at the end of the interface. They can be reused by subsequent interfaces. The unlock subscriber and purge journal operations (see below) are required to commit consumption of these changes, and remove useless entries from the journal respectively.
In consistent mode, the JRN_DATE column should not be used in the journalizing filter. Using this timestamp to filter the changes consumed does not entirely ensure consistency in these changes.
Operations after Using the Changed Data
After using the changed data, the following operations should be performed:
Unlock Subscribers: This operation commits the use of the changes that where locked during the Lock Subscribers operations for the subscribers. It should be processed only after all the changes for the subscribers have been processed. This operation is implemented using a package step with the Journalizing Model Type. It should be always performed after the last interface using changes captured for the subscribers. If the changes need to be processed again (for example, in case of an error), this operation should not be performed.
Purge Journal: After all subscribers have consumed the changes they have subscribed to, entries still remain in the journalizing tables and should be deleted. This is performed by the Purge Journal operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from the other journalizing operations.
To create an Extend Window, Lock/Unlock Subscriber or Purge Journal step in a package:
Open the package where the operations will be performed.
Drag and drop the model for which you want to perform the operation.
In the Type list, select Journalizing Model.
Check the option boxes corresponding to the operations you want to perform.
Enter the list of subscribers into the Subscribers group if performing lock/unlock subscribers operations.
Click OK.

I did a pre-order on a music album then I did not realize you needed to check the email to get the album so by accident I canceled it now I lost my album please help

I did a pre-order on a music album then I did not realize you needed to check the email to get the album so by accident I canceled it now I lost my album please help

In list view, select the album column. To choose which columns appear, select an item on the left side of the window (a playlist, for example), choose View > View Options, and select the information you want to see. You can also Control-click a column heading to select columns to display.
The column selected determines how tracks are displayed. For example, clicking the "Name" column displays all tracks in alphabetical order; clicking the "Album" column displays the tracks in album order; clicking the "Date Added" column displays the tracks in the order that they were imported into your library. Columns also have a disclosure arrow at the right of the column (when selected) that you can click to reverse the order.

I did not realize my mlb.tv subscription auto-renewed Feb 15, on my Visa. On March 5, I purchased MLB.TV on my Apple TV on my Discover Card so want a refund on the Discover card purchase.

I was told by APLCare that I needed to ask ITunes Support about this issue. How do I get a refund from a purchase I made on my Apple TV? I need refund for buying MLB.tV on my Apple TV on March 5 with my discover Card. The reason I need the refund is that I did not realize that my subscription from last year had already renewed for mLB.TV and my Visa card was charged for this subscription in early February. What do I do to get the Discover card refund?

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If you haven't already done so, then to stop it renewing again there are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

When will Zotero be available on Firefox again? I did not realize Zotero would be completely shut off Firefox and am in the midst of finishing several papers that require the use of the citation manager.

I did not realize that downloading Firefox 4.0 to test it would mean that I would lose the ability to use Zotero. This has greatly impeded me in writing papers for graduate school, most specifically my master's thesis. Is there any way to get re-set to the Firefox version prior to 4.0 and regain the use of Zotero?

Firefox 4.0 is supported by the [http://www.zotero.org/support/2.1_beta Zotero 2.1 betas], although apparently there are issues with the Mac version of word processor plugins. See [http://forums.zotero.org/discussion/13363/firefox-beta4/ the discussion on the Zotero forums].

HELP!, i had a massive pst file, i did not realize how massive, it is messing up everything and I want to "unimport" the pst, it is overwelming the server

I have a monzilla email account. I had a massive pst file, six years worth from another computer. When I imported this file I did not realize how massive it was,
I want to disconnect this pst from my monzilla account, how do I do that. I keeps down loading thousands of emails to the server and is crashing, locking up, the server exceeding "quota".
I need to kill it now please.
Thanks,
Mark
This is a public forum! Personal info removed by moderator. Read the [[Forum rules and guidelines]]

Is your question related to Thunderbird?

Exception thrown from servlet function

Hi,
I have a servlet "main.java" which connects to a database and displays a table. The table contains a check box in front of each table row. It has three buttons at the bottom "add" modify" "delete". When the user clicks on some check boxes and clicks on "delete" button how can i know in the script delete.java that these are the check boxes that have been checked or selected. I tried to do in the following way
String[] checkedBoxes = new String[100];
checkedBoxes = req.getParameterValues("sel");where sel is the name of the checkboxes
but I am getting the following error:
[21/Aug/2001:10:36:54] failure ( 1118): Internal error: exception thrown from the servlet service function (uri=/servlet/delete.class):java.lang.NullPointerException, Stack: java.lang.NullPointerException
Any help would be appreciated.
Thanks

Does every checkbox have the same name, i.e. "sel".
In this case you're dealing with a checkbox group. Similar to a select-style dropdown or radio button group.
I know I've had problems with dropdowns in Netscape where the select parameter was not being passed at all, so I'd get null values. I got around this by having the form submission re-assign the value from the select list to a hidden variable and then getting the value from the request.getParameter("hiddenFieldName") instead of the "dropdownFieldName".
You could try to name each checkbox individually using an appended ID, such as sel1, sel2, etc. and then have these parameters picked up using a loop construct, request.getParameter("sel" + i) -- you may want to pass some value back that would also indicate how many total checkboxes you had so you could determine how many iterations of the loop to go through.
On the form side, you could probably set the checkboxes up using a similar looping mechanism so that you wouldn't have to explicitly write each checkbox name.
If this is in fact similar to the Netscape issue I was having with dropdowns, I'd be interested to hear if it'll work in IE.
I got a bit off-topic, but hope it helps.

I installed Windows 7 and did not realize I had to uninstall iTunes; now I've lost my database setup.

When I installed the Windows 7 operating system, I did not know that I was supposed to Uninstall iTunes, and then reinstall my database after I installed Windows 7. Now I have lost my iTunes database; however, I still have many .wav files on my computer, but all of the files are arranged by "Artist"; when I click on an Artist, I get the "Albums" listed for that Artist; when I click on an Album, I get the "Tracks" (.wav), preceded by the "Track Number", (space), "Track Name".
Does anyone know if I can "Batch", search the Internet, and recreate my original "iTunes" database from the .wav files that are contained on my Music Library, External Drive "H"; and, my backup external drives "G" & "I"? I may have additional tracks on these drives that are not included in my basic Music Library; after I include all of the .wav files on my external drives, I plan to delete all duplicate files. My basic iTunes Program is on my Drive "C", along with my "Temporary" Audio Files; I plan to delete my Temporary Files after I recreate my Audio Library on my "H" drive. If this is possible, could someone give me "step-by-step" instructions to do this operation. If this is not possible, please let me know, so that I can start downloading my CD's again.
I have approximately 3400 ".wav" files on my computer, and I feel there must be a way to re-build my Audio Library Database, without importing all of my individual CD"s again.
Thanks for any help you can offer to accomplish my mission.
I don't want to search my computer Drive "D", because I use this drive Exclusively for my Audio Restoration files.

Hi John,
A major drawback with using wav for storage is that it doesn't carry a tag. This means that in the event of a corrupted library the only information remaining is the filename. Other data may be stored in the path but iTunes doesn't know how to get it. I understand that you need this format for your workflow with Diamond Cut, but that makes it all the more important that you backup your iTunes database on a regular basis.
Provided that you still have the tracks in their artist and album folders and haven't let iTunes "reorganise" them you should be able to restore some useful metadata using my script TagFromFilename. The script reads the path and filename, and provided these are in the normal layout of <Path>\<Artist>\<Album>\## <Name>.<Ext> can restore Artist, Album Artist, Track Name and Track Number. If your files have a different but predicatable layout with the same information, e.g. the data is all in the filename, then I could create a suitable version of the script to get the data into iTunes. I recommend you disable both the Keep... and Copy... options in iTunes advanced preferences before adding files to the iTunes database. Ideally you also want a complete backup of your correctly structured folders in case you need to pull copies back from it.
As stated earlier, uninstalling iTunes before the upgrade wouldn't have helped. The crucial thing before any upgrade is to backup all user data from the drive that will be wiped. Typically the iTunes database lives in C:\Users\<User>\Music\iTunes on Vista or Windows 7. The crucial file is called iTunes Library.itl. You seem fairly certain that you don't have a backup database that you could restore but an exhaustive search of your hard drive for files of the form *.itl might still be worth doing. If you find any apart from the active library we can discuss how you open them to see if they are useful.
tt2
PS The entire message in bold thing is a bit "shouty".

I am ñot going to be charged for anything am I? did not download anything except free reader

I will not get charged for any of this will I? Did not download anything but free reader

The free Reader is free, so you shouldn't be charged anything for downloading it.

Just got a mac air and started using it. after getting it set up i migrated files from my old pc. i did not realize that the files migrated to a different user account. how do i delete this user account and not lose the migrated files which i need

I just got a mac air and set it up and started using. after getting famiiar with it i migrated my files from my old pc. i did not realise that the files migrated to a new user account. how do i delete this user account but not lose the migrated files?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

Can retrieve value from one table, but not the other (exception thrown)

Hi
I hope some friendly soul can help me out here. I have a local Access database file. I am able to get a value from all tables except for one, which throws this error: "System.NullReferenceException:
Object reference has not been specified to an object".
The rather simple lines of code when working is this:
Dim email As Object
value = MyDataSet.Tables("Table")(0)(1).ToString
Msgbox(email)
However, when simply changing from "Table" to "AnotherTable", the exception is thrown. I
have seriously no idea why. I've made sure the datatypes are the same and that the values are not NULL.
What gives?

Hello,
Going with your last reply, you should be accessing data via the strong typed classes that get generated.
Example using Microsoft Northwind database accessing the customers table in a MS-Access database. Note the check for Rows, we could even go farther if we are questioning issue with the data via try-catch statements writing errors to the IDE Output window.
I would highly recommend never referencing rows without first checking if there are rows and secondly never reference columns by ordinal index, always use the column name. One example with ordinal positioning, suppose someone did SomeDataTable.Columns("SomeColName").SetOrdinal(3)
and you expect the ordinal position to be 1 ? things will crash-n-burn. Food for thought :-)
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CustomersTableAdapter.Fill(Me.MainDataSet.Customers)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
If MainDataSet.Customers.Rows IsNot Nothing Then
Dim FirstCompanyName As String = MainDataSet.Customers.FirstOrDefault.CompanyName
MessageBox.Show(FirstCompanyName)
Else
MessageBox.Show("No rows in customer table")
End If
End Sub
End Class
In this case we get the first record from below in Button1 Click
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Did not realize init() exception thrown by servlet FacesServlet

Similar Messages

Maybe you are looking for