Diff type of table maint generator

Hi Guys
I have created a table maintanc but it has been created in a way that its only letting me enter one entry at a time,
cant i have something like v_ddat_54 where i can put a lot of entries in one go?
Rgds
Sameer

Hi,
While creating the table maintenance , select one step screen option, then you can enter multiple rows at once.
Regards
L K Appana

Similar Messages

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
<b>how to create a a T-code of that</b>
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

How to get our own F4 help in table maintanance generator

hi all,
i developed a table maint generator.
in this i have 3 fields out of three there is a field called subtype. for this i ahve to create f4 help for this. foir this field i have to display two descptions calles' sub type1 and subtype2. these are not coming from any database tables. any body can tell me how to wrote. and send me the sample code for it.
thanks,
maheedhar

Go to SE51..Give the program name..in your case..SAPL + function group name.
Give the screen number...that you gave when you created the table maintenance..
THen press change..
Create an event process on value-request for F4..
PROCESS ON VALUE-REQUEST.
FIELD ZTABLE-F4 MODULE F4_FOR_F4.
**In the module use the function module F4IF_INT_TABLE_VALUE_REQUEST.
Check this example for how to use this function module
TABLES: T005T.
DATA: BEGIN OF t_t005 OCCURS 0,
        land1 TYPE t005-land1,
      END OF t_t005.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) v_text FOR FIELD P_LAND1.
PARAMETERS: p_land1 TYPE t005-land1.
SELECTION-SCREEN COMMENT 13(35) v_text1.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_text = 'Country'.
v_text1 = ' '.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_land1.
REFRESH: t_t005.
SELECT land1
         INTO TABLE t_t005
         FROM t005.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
           DDIC_STRUCTURE   = 'T005'
            PVALKEY          = ' '
            retfield         = 'LAND1'
            dynpprog         = sy-repid
            DYNPNR           = sy-dynnr
            dynprofield      = 'P_LAND1'
            callback_program = sy-repid
            value_org        = 'S'
       TABLES
            value_tab        = t_t005
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS           = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to create table maintainenece Generator

hi all
       I dont know how to create table maintainence generator after creating the table.
I have created the table.
After that how to maintain the table.
What is the use of table maintainence generator.
Thanks

Hi Muthu,
Through table maintenance you can direct add new entries in your table. For that u need to follow some steps.
Step1 : Click Delivery and Maintenance tab in your table and select "Display/Maintenance Allowed"
Step2 : Utilities--->Table maint generator
Step3 : Give Authorization Group - &NC&
Step4 : Function group - Any ( You can give ur table name also ) This Function Group will genrate automatically.
Step5 : Maintenance type - Select first radio button "One Step"
Step6 : Maint. Screen No. - Overview screen as 1
                                              Single screen       as 0
Step7 : Click on Create button on application tool bar
Step8 : just save in your package.
Step8 : Create transaction code for the same . Environment----->transaction code
Step9 : Give any t.code name and click on create button. You will get a popup where you have to choose last radio button "Transaction with parameter"
Step10 : Give the transaction name - SM30 and check Inherit GUI Attribute"
Step11 : GUI Support - check all the check boxes.
Step12 : Name of screen field           Values
                VIEWNAME -                   Table name and
                UPDATE      -                      X
Finally u can this t.code and add new entries in ur table directly.
Regards,
Amit Nanda
SAP Consultant

Regenerating Table Maintenance Generator!!

Hi
i have created table maint generated in clinet 111 and made few change ..got to replicate the same...ie regenerate the table maintenance in 117...whats the way out?...can't modify table in 117...
its allowing me to insert entries in 111 ..how to make it do the same in 117?
Regards
Gunjan

If these clients are on the same system, then when you regenerate the table maintenance on 111, it should have reflected in 117 as well.
If these are two different systems, then you need to transport the table maint object to 117 client on the new system.
Regards,
Ravi

Table Maint. Generator

Hi All.....
Something very funny I am experiencing.....Funny because may be I am not aware of this.....Please help...
I created a Table Maintenance Generator for one of my Customized table, saving it under my Z Package and Function Group.
When this Request is being transported from DEV to QA, the Package and Function Group are not the same that I gave !!!!
I am checking in SE80, and this particular Table Maintenance Generator is present in both the Packages - Function Groups...again surprising....
This issue has become very Critical as of now....I will appreciate some urgent help.....

Hi,
Just check those table maintanance and function group is activated properly or not.otherwise go and activate that function group add it to some other package and request and then check.

DirectToXMLTypeMapping "create-tables" not generating XMLTYPE column type

Can someone tell me how to code an XMLTYPE field such that "create-tables" will generate the XMLTYPE column and such that the IntegrityChecker will not throw an error.
I am forced to run these alters after "create-tables" is run.
ALTER TABLE XML_SYS_MSG drop column message;
ALTER TABLE XML_SYS_MSG add (message XMLType);
Snippets:
<persistence...
<property name="eclipselink.ddl-generation" value="create-tables" />
</persistence>
public class XmlMessageCustomizer implements DescriptorCustomizer {
@Override
public void customize(final ClassDescriptor descriptor) throws Exception {
final DirectToXMLTypeMapping mapping = new DirectToXMLTypeMapping();
descriptor.removeMappingForAttributeName("message");
// name of the attribute
mapping.setAttributeName("message");
// IntegrityChecker requires uppercase for oracle
// name of the column
mapping.setFieldName("MESSAGE");
descriptor.addMapping(mapping);
@Entity(name = "XmlMessage")
@Table(name = "XML_MSG")
@Customizer(XmlMessageCustomizer.class)
public class XmlMessage {
@Id
@GeneratedValue(strategy = GenerationType.AUTO)
@Column(name = "ID")
private long id;
// @Column(columnDefinition = "XMLTYPE")
// private String message;
// ALTER TABLE XML_SYS_MSG drop column message;
// ALTER TABLE XML_SYS_MSG add (message XMLType);
private Document message;
public XmlMessage() {
public long getId() {
return id;
public void setId(final long id) {
this.id = id;
public Document getMessage() {
return message;
public void setMessage(final Document message) {
this.message = message;
Secondly if I turn on the IntegrityChecker it will fail
public class EnableIntegrityChecker implements SessionCustomizer {
@Override
public void customize(final Session session) throws Exception {
session.getIntegrityChecker().checkDatabase();
session.getIntegrityChecker().setShouldCatchExceptions(false);
}

Adding:
mapping.getField().setColumnDefinition("XMLTYPE");to the customizer should solve the problem.
--Shaun

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

Issue with data dictionary -Table maintanance generator

Hi all,
I have an issue with Data dictionary, table maintenance generator. I have entered some records in a custom table (ZBCSECROLETOGRP) and changed the delivery class from C to A. When I create the table maintainance generator, I am encountered with the following errors:
1)Field ZBCSECROLETOGRP-PORTALGROUP shortened (new visible length: 000032)
2)0012 could not be generated
3)In TCTRL_ZBCSECROLETOGRP field LENGTH has the invalid value 01
My main motto is to create the table maintainace generator and transport to the furthur systems .
Please help.
ThnX in advance,
Vishal..

HI,
Regenerate the table maintenance by selecting the checkbox of "Modified field structure" => new entry & then save.
Also ensure that the new changes are not affecting old data bcz of data type changes. If that is the case, then delete the old records, regenerate table maint. & re-enter those records which you had deleted.
Thanks,
Best regards,
Prashant

How to create event in table maintenance generator

Hi guys,
I need to create an event for my table maintenace generator such that when the field land1 is filled, the landx field should take its data from t005t table. and the ladnx field should be display only, it can not be modified in table maintenance.
How can i create an event in table maint. gen? How am i going to do it?
thanks always,
mark

Hi,
As mentioned in the last post go to the event screen by
Environment --> Modifications --> Events.
There you click on new entries and try writing your logic for event 21 i.e. after selecting 21 give some name of your event and write down the logic how you want to do this.
If event number 21 does not work then try 1. One of these two should work.
Hope this helps!!!
Regards,
Lalit

Events in table maintenance generator 01

Hi all,
       I have an urgent requirement regarding the events in table maintenance generator.The requirement is i have a qty field in table i want to change the existing value it should allow only a lesser value.How to use TOTAL and EXTRACT structures.
it is urgent.please help me out.
Thanks & regards,
Kranthi

Follow the example below:
form get_vendor_name.
data w_extract type z_table.
data begin of w_total.
          include structure z_table.
data: action,
        mark,
end of w_total.
loop at extract into w_extract.
    check not w_extract-z_vend_no is initial.
    select single name1 from lfa1
                       into w_extract-z_vend_name
                       where lifnr = w_extract-z_vend_no.
    modify extract from w_extract.
endloop.
loop at total into w_total.
    check not w_total-z_vend_no is initial.
    select single name1 from lfa1
                       into w_total-z_vend_name
                       where lifnr eq w_total-z_vend_no.
    modify total from w_total.
endloop.
endform.
Reward points if useful.
Regards.

Purpose of table maintenance generator

wht is the purpose of table maintenance generator

Hi Pavan,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm]
Link: [http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm]
Link: [/message/2831202#2831202 [original link is broken];
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Error while creating table maintainence generator !

Hi All ,
I want to create a table maintainence generator for table ZZFTLPNT . However I am getting the following error :
Typ Message text                                                           LTxt
    Field ZZZFTLPNT-RRCTY shortened (new visible length: 000015)
    Field ZZZFTLPNT-DRCRK shortened (new visible length: 000015)
    Field ZZZFTLPNT-ROBJNR shortened (new visible length: 000009)
    Field ZZZFTLPNT-SOBJNR shortened (new visible length: 000009)
    Field ZZZFTLPNT-RRCTY shortened (new visible length: 000007)
    Field ZZZFTLPNT-DRCRK shortened (new visible length: 000007)
    Field ZZZFTLPNT-ROBJNR shortened (new visible length: 000004)
    Field ZZZFTLPNT-SOBJNR shortened (new visible length: 000004)
    Field ZZZFTLPNT-RRCTY shortened (new visible length: 000003)
    Screen SAPLZZZFTLPNT                           0001 could not be gene
    Memory for screen LOAD   is used up. bytes) is not
Please advise .

Hi Pankaj
it is "Display/Maintenace allowed" and delivery class is 'A' .
Edited by: Ambar Patil on Dec 9, 2008 11:59 AM
Edited by: Ambar Patil on Dec 9, 2008 12:01 PM

What are the differnet type of tables in mdm ?

hi experts i am new to mdm. just i have refered some documents in that the have created some table and fileds ,taxnomy,lokups,.......
so can any one give me the bref ida on
what is mdm ?
what are the different type of tables in mdm ? What is the requirement for the selection of table?
what is a feld ? what are the diff type of fealds in mdm ? And requriement ?
what is taxnomay ? And Requriement or where or when we can use ?
what is lookups in mdm ? what is lookup tables in mdm ?
what is mdm console ?
what is mdm data manager. ?
what is mdm import manager ?
what is mdm syndicator ?
please any body answer this questions .

Hello Praveen,
Below are the the all possible links of books,articles... etc for MDM.
http://hosteddocs.ittoolbox.com/RD021507b.pdf
demo
http://www.sap.com/community/int/innovation/esoa/demo/MDM_demo/index.html
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=3431&PortalId=0
MDM
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=1666&PortalId=0
SAP Netweaver MDM Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09b548d-7316-2a10-1fbb-894c838d8079
SAP NETWEAVER MDM Leverage MDM in ERP Environments - An Evolutionary Approach -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4059f477-7316-2a10-5fa1-88417f98ca93
Master Data Management architecture patterns
http://www-128.ibm.com/developerworks/db2/library/techarticle/dm-0703sauter/
MDM and Enterprise SOA
http://www.saplounge.be/Files/media/pdf/Lagae---MDM-and-Enterprise-SOA2007.10.10.pdf
Effective Hierarchy Management Using SAP NetWeaver MDM for Retail
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ee0c9e-29a8-2910-8d93-ad34ec8af09b
MDM World
http://mdm.sitacorp.com/
MDM: Master Data for Global business
http://www.sitacorp.com/mdm.html
MDM Master Data Management Hub Architecture
http://blogs.msdn.com/rogerwolterblog/archive/2007/01/02/mdm-master-data-management-hub-architecture.aspx
Improve Efficiency and Data Governance with SAP NetWeaver MDM
http://www.sapnetweavermagazine.com/archive/Volume_03_(2007)/Issue_02_(Spring)/v3i2a12.cfm?session=
Data Modeling i MDM
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-31279471c9758576df
SRM-MDM Catalog
http://help.sap.com/saphelp_srmmdm10/helpdata/en/44/ec6f42f6e341aae10000000a114a6b/frameset.htm
http://events.techtarget.com/mdm-ent/?Offer=DMwn716mdm
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721869
http://searchdatamanagement.bitpipe.com/data/search?site=sdmgt&cr=bpres&cg=VENDOR&sp=site_abbrev%Asdmgt&cp=bpres&st=1&qt=MasterDataManagement
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721819
http://www.dmreview.com/channels/master_data_management.html
http://searchdatamanagement.techtarget.com/originalContent/0,289142,sid91_gci1287620,00.html?bucket=NEWS&topic=307330
MDM Console -- http://help.sap.com/saphelp_mdmgds55/helpdata/en/88/9f9c427055c66ae10000000a155106/frameset.htm
MDM Import manager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/120367f94c3e92e10000000a1553f6/frameset.htm
MDM DataManager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
MDM Syndicator --http://help.sap.com/saphelp_mdmgds55/helpdata/EN/43/5fe0e8a55f5f6be10000000a1553f6/frameset.htm
Rgds
Ankit

Diff type of table maint generator

Similar Messages

Maybe you are looking for