Difference between .Incumbent Employees name and  Employees name

Hello HCMers,
What is the difference between the data coming from the following fields:
1.Incumbent Employees surname p0000-STAT2  & Employee surname PA0001-SNAME
2.Incumbent Employees name p0002-VORNA  & Employee Name PA0001-SNAME
Can somebody enlighten me?

Stalin,
PA0000-STAT2 is for Employement status
PA0002-VORNA and NACHN are for FIrst name and last name
PA0001-ENAME is combination of VORNA and NACHN
please go to SE12 put the table name and check the fields and description.
cheers
Ajay

Similar Messages

  • Difference between Sales employee and Employee responsible

    Hi,
    Can somebody explain the difference between sales employee and employee responsible
    Thanks in advance
    Reddy

    hello, friend.
    both sales employee and employee responsible have employee numbers and fall under partner type "PE".
    an Employee Responsible is a more general term and could refer to someone who is supposed to maintain documents, who may be dedicated to service a customer or a set of customers, a credit employee or a quasi-manager.  he can even be a sales employee.
    a sales employee or sales personnel is more specific.  usually this refers to the salesman who has a defined set of customer accounts.  the sales employee is also specifically tracked in Sales Info System (e.g. t-code MCTI).  this position carries the SAP standard code/partner function of "VE" (in German).
    hope this helped you.
    regards.

  • Difference between fully qualified name and Canonical name

    CAn annyone xplain Difference between fully qualified name and Canonical name

    If you dont know then don't replyYou were given a link directly to the answer. The state of my knowledge is therefore (a) irrelevant and (b) not proven by anything in this thread.
    Who asked [you] to reply
    You* did, when you posted here.
    I know how to get from java language specificationClearly not, or you wouldn't still be posting here.
    I need clarification for what is in java lang specification..It seems clear enough to me. What part of "A member class or member interface M declared in another class C has a canonical name if and only if C has a canonical name. In that case, the canonical name of M consists of the canonical name of C, followed by ".", followed by the simple name of M." didn't you understand?

  • Difference between 006 DNS Servers and 015 DNS Domain Name

    hi,
    what's difference between 006 DNS Servers and 015 DNS Domain Name?
    please guide me.

    Hi
    Option 006 DNS servers           = IP Address of your DNS Server, e.g, 10.10.10.1
    Option 015 DNS Domain Name       = test.local, your domain name.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Re: DIfference between Schemas, PCRS' FUnctions and Operations

    Dear SAPExperts,
    Can anybody pls tell me what is difference between Schemas, PCRS' Functions and Operations.
    Thanx in advance
    Regards
    Aniruddha

    Hi Aniruddha
    When the payroll driver is executed (for ex: PC00_M40_CALC for INDIA is executed) the schema IN00 (standard schema) is executed and it calls certain functions (functions may use Rules. Rules contain Operation) and also subschemas.
    Functions could be of four types
    1. Performing some payroll computations (E.g. INEPF function calculates the PF amount of an employee during payroll run)
    2. Calling rules (E.g. P0045 function calls a rule INLN to compute the loan details of a personnel number).
    3. Getting data from Infotypes (E.g. P0581 will get the data from Infotype-581 for payroll processing).
    4. For some decisions. (E.g. IF & ENDIF function is used to execute as per the true and false decisions) etc.
    When the PY is executed SAP uses lot of Internal Tables to store data and also provides data to other internal tables.
    The read and change access to Internal Tables is enabled using functions that are executed in a personnel calculation schema and using operations that are executed in personnel calculation rules.
    The following is just an attempt to provide some info on how Functions are processed during the PY Run. For ex: (functionality of subschema XIN0 and INBD)
    1. INITIALIZATION OF PAYROLL: When the Payroll is executed first the subschema XIN0 is called,   This subschema comprises the following main steps:
    I.     Specify program type (payroll or evaluation)
    II.     Set switch for database updates (YES/NO) all database updates are controlled via this switch (otherwise simulation)
    III.     Only infotypes from the HR master record which apply to the selected personnel number are read.
    IV.     All Time Management infotypes are imported.
    V.     Specify check against control record PA03 (test or live).
    2. READ BASIC DATA: Once the Initialization of Payroll is successful, the subschema INBD is called. This subschema reads the Basic data of an employee who is there in the Payroll execution. Basic Data includes, determining Employee Name, Reading Work Center/Basic Pay Data, Setting Financial Year Dates and Allowance Grouping Tables, Reading Previous Employment Tax Details, Reading Housing (HRA/CLA/COA), Reading Exemptions, Reading Income from Other Sources, Reading Section 80 Deductions, Reading Investment Details (Sec 88), Reading Provident Fund Contributions, Reading Other Statutory Deductions, Reading Car and Conveyance, Reading Long Term Reimbursements, Read ID Details. Function GON checks whether all the master data has been imported, no further processing of schema will occur unless certain data is present.
    The Subschema INBD calls the following functions in order to read the Basic Data:
    ENAME :
    Function ENAME reads the last valid name of the employee in the payroll period. The formatting used for the country in question is used when displaying this name.
    WPBP
    If an employee receives a pay increase within a payroll period, the Basic Pay infotype (0008) is changed and delimited as of a specific date. Two data records exist for one payroll period.
    During payroll, the system writes the Basic Pay wage type to the results table with two different indicators. These split indicators are a link to the WPBP table that contains the relevant values. The system takes into consideration both data records for the corresponding partial periods when calculating remuneration.
    ININI
    P0580
    P0581
    P0582
    P0584
    P0585
    P0586
    P0587
    P0588
    P0583
    P0590
    P185I
    GON :
                    Function GON checks whether all the master data has been imported. No further processing of the schema will occur unless certain data is present. Checking procedures vary from country to country. There must always, however, be a work center (P007).
    [Def. of Functions, Rules and Operations (copied from Raju's answer)
    Schema is a collection of functions
    A Rule is a collection of operations.
    An operation is a very basic piece of logic that is used, mostly, to manipulate wage types
    Best Regards
    Reddy

  • What is difference between  Service map iview and Workset Map iview

    Hi Experts,
                        Can anyone tell me the difference between  service map iView and Workset Map iView.
    When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
    Thanks in Advance
    Janardhan

    Hi,
    Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
    Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
    if you want to more info pls go thr the below thread
    Workset Map iView
    i hope it will help you
    Thanks,
    Sreeni.

  • What are differences between the target tablespace and the source tablespac

    The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
    Why create so many errors?
    How to avoid these errors?
    What are differences between the target tablespace and the source tablespace?
    Is this datapump action really successfull?
    Thw following is the log output:
    [oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Processing object type TABLE_EXPORT/TABLE/TABLE
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
    . . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
    . . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
    . . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
    . . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
    . . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
    . . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
    . . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
    . . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
    . . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
    Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
    Processing object type TABLE_EXPORT/TABLE/COMMENT
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39083: Object type REF_CONSTRAINT failed to create with error:
    ORA-00942: table or view does not exist
    Failing sql is:
    ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
    ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/TRIGGER
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
    ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

    Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
    Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
    Justin

  • What's the difference between AIA 3.0 and AIA FP 11g Release 1 (11.1.1.4.0)

    Hi, experts,
    Have a question need your great help and clarification, you know we have Oracle AIA Foundation Pack 2.5 based on SOA 10.1.3.4 installation, the new release for SOA has been released on this version Oracle Fusion Middleware 11g R1 (11.1.1.4.x) Released the other day, within this version, we have a Foundation Pack 11g Release 1 (11.1.1.4.0) based on SOA11g.
    My questions are as below
    1) What's difference between AIA 3.0 and Foundation Pack 11g Release 1 (11.1.1.4.0)?
    2) We know, on the top of AIA 2.5, we have Foundation Pack 11g Release 1 (11.1.1.2.0) and Foundation Pack 11g Release 1 (11.1.1.4.0), doesn't mean that the Foundation Pack 11g Release 1 (11.1.1.4.0) has another nickname that is AIA3.0?
    3) Does anyone provide AIA 3.0 installation and implementation guide?
    Appreciated if you could provide some suggestions or comments based on above question, thanks in advance!

    Please see the answers below...
    #1 . AIA 3.0 is internal project name, AIA 11g R1 is an official release which is 11.1.1.2.0, then after two patch sets released they are 11.1.1.3.0 and 11.1.1.4.0
    #2 hope the above answered your question.
    #3 AIA 11g R1 x install and developer guides available on OTN.
    Regards,
    Narayana

  • Difference between ECC 6.0 and earlier versions

    Hi,
    one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD'  and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD'  respectively.
    (of course SPDD and SPRO tcodes is known by everone i suppose)
    Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
    Thanx in advance

    Unicode Errors Encountered and their Solutions
    E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
         Error:
         OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
         Solution:
         OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
    E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE  or  IN
          CHARACTER MODE  addition.
         Error:
         DESCRIBE DISTANCE  BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
         Solution:
    DESCRIBE DISTANCE  BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
    IN CHARACTER MODE.
    E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
         Error:
         IF USR02-UFLAG O YULOCK.
         Solution:  Since the data type of USR02-UFLAG is type INT and is compared with data type
                    X u2013 Hence the error. So we  define a new variable ZULOCK and assign the
                    value of USR02-UFLAG to ZULOCK.
                  New variable             
                  DATA: ZULOCK(1) TYPE X.   "APBRP00
                  Assign value               
                                ZULOCK = USR02-UFLAG.
            Compare -
                   IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
    E4.  HT cannot be converted to a Character type field
    Error :
    WRITE ht TO t_data+10(2).
    Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
             t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
             another data type where one of them is type string .Hence the error occur,
             so the data type of ht is been change to Type u2018Cu2019
         OR
               A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
         Error:
              DATA: BEGIN OF ht,
                   x(1) TYPE x VALUE '09',
              END OF ht.
         Solution:
                  Define Class after the Tables definition.
                       CLASS cl_abap_char_utilities DEFINITION LOAD.
                  Data Defination :  Comment internal table HT and define a variable HT type C.
           *   Insert + APRIA00 05/02/2007 Unicode project
           *   DATA: BEGIN OF ht,
         *         x(1) TYPE x VALUE '09'
           *   END OF ht.
         *   Insert - APRIA00 05/02/2007 Unicode project
           DATA HT type C.
           Before using HT assign Horizontal tab.
                     Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.  
    E5.  In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
         Error :
         #LINES                 TYPE I,
         Solution : Since the # is used in the start of name, it is not allowed. We need to
                  remove it. 
         Solution for the above
         V_LINES                 TYPE I,
    E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
         Error:
         OPEN DATASET PATH_NAME IN TEXT MODE.
         Solution:
         Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
         Upload        =  OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)    
         Error:
                data: begin of tab,                   "Excel Parameter Split at TAB
            t type x value '09',          "Tabulator
           end of tab.
                concatenate 'Material' 'Package Status'
                    into z_download-line separated by tab.
                ( In the above command  the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
         Solution:
         Define a  class just after the Table defination.
              CLASS cl_abap_char_utilities DEFINITION LOAD.
                Define  variable Tab as shown below :
              Data : TAB           TYPE C.
         Before the concatenate statement assign the value of Tab using pre-defined attributes.
              TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
          enabled; use the class cl_gui_frontend_services     
         Error-1:  Function WS_DOWNLOAD is obsolete in Unicode environment.
                call function 'WS_DOWNLOAD'
                     exporting
                          filename = zfilename
                     tables
                          data_tab = z_download.
         Solutions-1: Instead of WS_DOWNLOAD use  GUI_DOWNLOAD.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = zfilename
      TABLES
        DATA_TAB                      = z_download.
    E9.  The "/" character is reserved for identification of namespaces. It must be entered twice.
            The name  of a namespace must be at least 3 characters long.
         Error :      
                     U/N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
         Solution :
         * Special character can not be used to define a data variable
         *      U/N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
                  U_N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
         * Insert - APSUS02 07/02/2007 Unicode Project
    E10.  "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
             "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
             of a Unicode character.
         Error : This error is encountered when data from one internal table is copied to another
                             internal table which different structure. In this case its LP_TAB & CS_TAB.
                     LP_TAB[] = CS_TAB[].
         Solution :
              * Replace + APSUS02 07/02/2007  Unicode Project
    *   LP_TAB[] = CS_TAB[].
                  move-corresponding CS_TAB to LP_TAB.
              * Replace + APSUS02 07/02/2007  Unicode Project
    E11.  Could not specify the access range automatically. This means that you need a RANGE
              addition.          
         Error :  Range need to be specified as an addition to the command.
                DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
               Solution : 
                DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
              * Insert + APSUS02 07/02/2007  Unicode Project.
                                                          RANGE ABCD+0(4).
    * Insert - APSUS02 07/02/2007  Unicode Project.
    E12 .  Processing Terminated Error code: Error in opening /
                                              Path not found when downloading to Unix directory.
         Error : PARAMETER: outfile(92) DEFAULT
                  '/CP/interface/NPP/data/MX/cbslaprcpts'
                        LOWER CASE,
                   kmxmstrd AS CHECKBOX.
                This error is encountered when the path is missing. The above path is related to CCP.
         Solution:  For testing purpose comment the original path and replace it with
                                     /CP/interface/CCD/Unicode_test/ 
    E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
         Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
                   Call function 'WS_UPLOAD'
           Exporting
                Filename                = zfilename
                Filetype                = u2018DATu2019
           Tables
                data_tab                = z_upload
           Exceptions
                Conversion_error        = 1
                file_open_error         = 2
                file_read_error         = 3
                invalid_table_width     = 4
                invalid_type            = 5
                no_batch                = 6
                unknown_error           = 7
                gui_refuse_filetransfer = 8
                others                  = 9.
         Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
    1) First define a type pool and a variable of type truxs_t_text_data.
    TYPE-POOLS: truxs.
    DATA: it_raw TYPE truxs_t_text_data.
         2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
    *     I_FIELD_SEPERATOR        =
    *      i_line_header            =  ' '
          i_tab_raw_data           =  it_raw       " WORK TABLE
          i_filename               =  zfilename
        TABLES
          i_tab_converted_data     = z_upload[]    "ACTUAL DATA
       EXCEPTIONS
          conversion_failed        = 1
          OTHERS                   = 2.
         Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
    Put  square brackets after internal table as shown above.
    E14.    CURSORHOLD may not be converted into a number.
         Error:  GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
         Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.  

  • Difference between Abstract portal Component and JSPDyn page.

    Hi Experts,
    What is the difference between Abstract portal Component and JSPDyn page.
    Thanks,
    Jay.

    Hi,
    The PDK provides two methods for creating a portal component:
    Abstract Portal Component
    The Abstract Portal Component class offers a lean method for writing HTML commands to the Web client as well as for basic event handling. It is an implementation of the IPortalComponent, which is the central abstraction of the Portal Component API.
    DynPage
    The Page Processor Component, which extends the Abstract Portal Component, returns a DynPage. It provides more sophisticated event handling. Controls that produce events (such as buttons and checkboxes) have an event attribute that contains the name of the event handling method. This event handling method is invoked by the DynPage when it occurs.
    The JSPDynPage is an implementation of the DynPage and allows the use of the DynPage in combination with JSP (Java Server Pages).
    The PDK documentation and examples focus on the DynPage. Easier event handling and the separatation of content development (JSP) from application development (Java) make the DynPage a better choice for components with interaction and changing content.
    For more details, Refer thes thread,
    https://fortress.wa.gov/dop/portal/irj/portalapps/com.sap.portal.pdk.basic.portalcomponentimplementation/docs/jspdynpage.html
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0b3e9d5-b2af-2a10-20ba-9f6ce6b1a27f
    Hop it helps..
    GS
    Edited by: Sathishkumar GS on Apr 14, 2008 2:07 PM

  • I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

    I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

    Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
    I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
    Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
    When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
    In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
    I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
    Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
    Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
    Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
    Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
    On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
    Good luck!

  • Differences between MDM 3.0 and MDM 5.5?

    Hi,
    Can anybody tell, what are the differences between MDM 3.0 and MDM 5.5?
    I heard that, there are lot and lot of changes...
    Thanks for your reply,
    regrads,
    cg

    We can look at differences in more than one way:
    1. Technology wise
    MDM5.5 is developed in C++ & runs on a C++ engine as compared to MDM 3.0 which runs under WAS
    However MDM 5.5 is integrated with NW largely, though it can & is planned to be improved further
    2. Product Catalog Management
    MDM 5.5 has rich PCM capabilities which did not exist in MDM 3.0
    3. Other additional capabilities in 5.5
    Multilingual support
    Syndication of data to XI or file system
    Lean, R/3 Idoc based model for supplier, customer, material, employee
    4. Ease of installation and usage is a also an advantage of 5.5
    You can read Nitza Levi's blog on MDM home page for more details

  • Difference between Business Objects Explorer and Polestar

    Hi all,
    can anyone help me out with the main differences between Business Objects Explorer and Polestar.
    thanks & regards
    immanuel.

    Explorer is the new product name for Polestar.  There have been a few versions of Explorer released since it was called Polestar, but you can find the latest 'whats new' doc here which lists the latest additions:
    http://help.sap.com/businessobject/product_guides/boexplXI32/en/exp32_whats-new_en.pdf
    For one, Explorer now comes in two editions... Standard and Accelerated.  The Explorer Standard edition allows reporting off of Universes, just as the original Polestar product did.  Explorer Accelerated allows reporting off of SAP BWA indexes as well as Business Objects universes.  Both versions now allow uploading of excel files to report off of.  You can export an Information Space to a Webi doc or Excel file.  Users can now save favorite links to an Information Space.  Sorting has been improved as well as graphing functions and overall display.  You'll have to install the latest build of Explorer - "Explorer 3.2 SP1" and compare.  I don't know of a document or matrix that compares Polestar to Explorer.  The two are basically the same product with a number of enhancements added to the Explorer line.

  • Difference between work bench request and customizing request

    in abap point of view please give me the difference between work bench request and customizing request

    In simple terms -
    Work bench Request is used by ABAPer.(Creatation of Programs, TCodes or ABAP Dictionary Objects)
    Customizing Request is used by Functional Consultants. (Used to configure the system as per clients Business requirements).
    The Change Request is that request when you do some thing new in customizing or configuration in the system. The system will automatically pop with the change request pop box , when you can give request name as defined by the system or can give your own request name with heading of what changes you have made while customization. The system will generate a request number and you save it. (e.g.:- VEDK-2785467) VEDK- means the Clients System name then followed by the system generated request number.
    Now when you want to release the request you have to use the T-code SE10 where you can see the requests under the heading modifiable or released. Go to the modifiable option. Each request will have again an internal request number. First you have to release the internal request and then release the external request number. This will in turn released by the basis guys thru the T-code SM64 in a group when all the requests are pooled from different users.
    The task which you have mentioned in your question is nothing but the what task you have performed while customizing the client system and the heading name which have given it for that task and generated a request for that task.
    Change Request Management ...
    http://help.sap.com/saphelp_nw04/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Creating Change Request Management
    http://help.sap.com/saphelp_nw04/helpdata/en/42/157408dd674a9cbc099f634e9bd069/content.htm
    Change Request
    http://help.sap.com/erp2005_ehp_02/helpdata/en/e5/e5bc42348a43fba6f1b390fc8c4b36/frameset.htm
    Customizing Request:- which will be used when any customization changes are doing.
    Example:- In your standard Tcode always you cannot find all the fields or options, if you want to enable/disable some fields, in this case it will be treated as Customizing request, any customization will comes under this.
    Work Bench Request:- for new developments like new reports, BDC....etc, then Work Bench Request will be used.
    Reward if useful.

  • What's the difference between the triangle icon and the square icon on the

    What's the difference between the triangle icon and the square icon on the Bookmarks Bar, and how do you make the square thing happen?

    Both mean that the bookmark is a group or folder of multiple addresses.
    The triangle is the default setting, meaning that usually you click and choose a single address to open in the group. You can also right-click on the group name to select "Open in Tabs" to see ALL the addresses open in individual tabs.
    The square is this behaviour (open all addresses in tabs) fixed, so that it ALWAYS opens that way, even with a left click. If you want to access an individual address now, you have to use option-click.
    To switch between triangle and square, open your bookmarks screen (the book icon on the far left of the bookmarks bar, or Bookmarks menu - Show all Bookmarks, select the group you want to change, and tick the box marked "Auto-Click". You can of course switch back to triangle (default) behaviour in the same way.
    Matt

Maybe you are looking for