Difference between MSI 945PL NEO version 1 and 2

Hello,
My computer just died, I believe the motherboard is dead. I have a spare MSI 945PL NEO motherboard on hand. I would like to use my CPU from the dead machine with MSI motherboard. The CPU is intel Core 2 Duo 2.2 GHz. I looked on MSI website. The MSI 945PL NEO PCB v2 support Core 2 Duo CPU but not the PCB version 1. What is the difference between PCB version 1 and 2? What I can see is less RAM slot and faster FSB on V2. I want to know if I put my Core 2 Duo CPU into the motherboard, will it boot up? or will it damage the CPU? I do not mind the performance if the system can work together.
Thanks

We can't tell you which specific changes have been made to PCB 2.2 but in fact there is no Core 2 Duo support for PCB 1.0. As I still don't know if you have 1.0 or 2.2 I can't tell you what happens with your board. None the less it will most likely simply don't work if you try on 1.0 (board does not post). Using an unsupported cpu is a gamble: >>How to check CPU support<<

Similar Messages

Differences between the "Adobe Acrobat Versions 7 and 9"

Dear Adobe Support Team,
I need to know the differences between the "Adobe Acrobat Versions 7 and 9". I have worked with Acrobat 7 and have used the same script after installing Acrobat 9 for Automation Testing with QTP for validating pdf. The object "AcroExch.AVDoc" is not getting identified as object while working in QTP in the system/machine which has Acrobat 9 installed, whereas it works well in the machine which has Acrobat 7 installed . So it will be better if two things are known as per my understanding, ie.,
it must have compatibility issue (i need the difference between "Adobe Acrobat versions 7 & 9" to assure this) or
installation issue( which can be confirmed if the former question is answered).
So i kindly request you to help me out for this scenario.
Kind Regards,
Vikraman.G

Countless new features were introduced between Acrobat 7 and 9, are you really expecting us to type out a full list from memory?
If you are having specific issues with the Acrobat SDK, first refer to the Acrobat SDK for the higher version. If there remains an issue I suggest posting about the specific problem in the Acrobat SDK forum, rather than asking for an encylopedia of all possible information...
Note that Adobe do not support multiple installations of Acrobat on the same machine, so you can expect development issues if you do this.

Difference between MSI R6970-2PM2D2GD5 (V247-012R) and (V803-690R)

Hello,
I propose to buy a MSI R6970. In the vastness of the Internet I found two types of this video card. V247-012R and V803-690R.
But I cannot find out what the difference is. Can anybody help me. Thanks for your answers.

Difference hard can be noted..
It's down to place where's manufactured and accessories that comes with the card.

945pl NEO Mobo Smoked and Sparked.. Help?

Hi everyone,
Please bear with me as I"m not super technical and also a bit tired/stressed as well as new here.
Some months ago I decided to go to a dual cpu so I upgraded to a dual using the same board as before. It started up, everything was fine until I'd turn it off. Sometimes it'd start up and sometimes not so I'd just leave it running.
It was as if there was a short? Anyway I decided to see if it was the psu so I took it to best buy (LOL OH BOY) the woman there told me I was wrong in calling the cpu the cpu because the case was the cpu, the whole thing. (haha) I asked to have my psu tested (unfortunately it was her who tested it). Claimed it was bad, recommended a new one (DYNEX) (Specs below). I got it home, hooked it all up and it smoked and smelled bad. I turned it off and didn't touch it for months since it scared me, alot of money involved. No warranties existed for the others that I'm aware of.
I tried to figure it out today and took it all apart and reconnected everything thinking maybe I just had it hooked up somehow wrong and it smoked and sparked again! It's the silver grill top left of this board that did it.. resistor? I have no idea what it is. Looks like something you'd see on the back of a fridge, silver metal with ridges sticking up sorta like a grill. There are 3 black box looking things next to the cpu, they look a bit dull but no marks that I can see on the board (though I bet it's fried by now, gotta be!)
The bios has been cleared.
Previous psu (claimed bad by best buy "computer specialist") Athena 450w (trying to remember what you guys needed of the label) model no. PS-450w.
3.3v=28a 5v=42a 12v=20a (and 27a?)
max power 430w 115/230vac
New PSU: (made board smoke and spark) DYNEX ATX 500w model no. DX-PS500w(recommended by that assistant) 3.3v =35a, 5v =40a, 12v1=16a, 12v2=18a (voltage 115/230v)
My pc's specs:
Mainboard: MSI 945PL NEO version 1.0
CPU:Intel Pentium D Processor 915 2.80GHz 800MHz FSB, 2x2 MB L2 Cache
HDD:Seagate Barracuda 7200.10 320 Gigs
Video card: NVidia model P260 (which one? I can't see it on the card and can't remember)
NEC ND 2500A DVD r/rw & cd-r/rw
Sceptre monitor x9 version. Flatscreen. (doubt this matters)
ESM/DDR1g667 RAM (1 gig ddr/2 667.5300 16c/64x8/240pin
I'm already highly embarrassed about this.. but I'm hoping someone has had some ideas concerning things like this.. How do I see if anything got fried from the smoking/spark? I've read about some seeing if their chips were fried. Nothing is black or gray that I can see. The lights on the front would sorta flicker when I hit the power button. I dare not now though.
Any ideas anyone? Please...
Thank you for your time.. and please feel free to let me know if I've missed something. This is my first time posting about my pc work. Usually I figure it out. Usually.... *sigh*
Update:Checked cpu (no signs of burning) smelled the board, definitely the area I mentioned. When I hit power, it does occasionally spin the cpu fan but stops.. I hear a hum (electrical kind) but quickly shut it off.
I know how some feel about newbs but hey, this is the only way I'll learn.. to fix my own problems. Besides, you heard what I mentioned about the employee above. lol Some know less than I and they get paid to fix things (or break them).

Hi ya! I'm back and I think I'm running okay. Unfortunately the guy broke the plastic piece on my cpu's fan so I need to find another I suppose.. It's connected with 3 corners right now instead of 4. I knew it was bent but he went and broke it all off.. :( No longer usable on that corner. I couldnt' think of any substitute either.
It's an Asus board. NOT ascus like I"d said. I believe that is a medical term and I misused it. *blush*
I went to get the board and got also a gig of ddr. This board has a nice monitor for voltage, temp and fan speed! I LIKE! (no offense to MSI).
I'm new to the OS I have too so bear with me on the specs!
I was stuck in a delimma and I think I should mention it with this.. but not sure... It's part of what my problem was.. so I suppose it's okay. My problems come in packages, no individual sizes lol.
I had windows xp x64 bit and had too much trouble finding protection for the pc.. antivirus and firewall wasn't satisfactory to me. So, I went seeking an OS, anything xp or above aside from what I had. I found no regular installs, only upgrades. Can't upgrade x64 bit version of xp to home or pro... but vista I thought.. maybe vista. Only thing I could find in stores were vista upgrades and xp upgrades. I bought the vista upgrade (also a best buy suggestion by a geek squad member) to find it won't work!
I couldn't do the advisor as it's 32 bit. So I tried to run it anyhow. It wouldn't let me clean install NOR upgrade so I decided to try manually, my options were limited and it was a weekend. I deleted my hard partitions to make just one, I cleaned it all up and did a full install. Still couldn't register it :( but tech support walked me through it! They had me upgrade my clean install. That worked! Then I could register the windows vista premium! (it's nice but takes getting used to).
That's the update. I've been through hades lol. It was my board.. I'd fried it by leaving 4 mount screws someone had put in the case when I bought it. I wasn't sure why they were there and thought it was to stablize the mobo. *blush*
NOW I know, do NOT leave anything on the case that is metal behind the mobo.. NOTHING.. Unless the mount screws go into it, not the board up against it!! lol
I'm in working order with what vista rates as 3.2 pc rating. *shrug*
The sims 2 reguires 3.0 rating apparently.
The 2 gig of ram really pays off.
I hope to get another MSI board later.. It'd be especially nice if MSI offers a monitor like Asus does.
Thanks for the input everyone!!!!
The only thing that was bad was my mobo. Everything else, even after me trying to start it over and over, was fine. My cpu, my ram, my psu, hard drive, dvd burner.. Everything else was fine.. The heat sink was verified as the smoking and sparking part. I have kept the board wondering if a shorted board can be repaired as I really liked that board.
Sorry it was so long.. I'm notorious for long departures lol..
Have a wonderful, eventful and peaceful week NovJoe!! (as well as other assistants)
Parthina

Differences between Photoshop CS6 (legacy version) & Photoshop CS6

What is the difference between Photoshop CS6 (legacy version) and Photoshop CS6? Legacy box has a red Adobe logo in top right corner on the box face and Photoshop CS6 has a blue logo with Ps in it and is located in the bottom right corner on the box face?

I take it that you're still continuing your best bang for buck search mentioned in your earlier posts?
Does this help?
"What is the difference between Photoshop CS6 [Legacy Version]($410) and Photoshop CS6 ($699)"
http://forums.adobe.com/message/5979283

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

Any ideas?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

Difference between Hyperion Financial Reporting version 7.0 and 9.3.1 ?

Hi All,
Can you please difine Difference between Hyperion Financial Reporting version 7.0 and 9.3.1 ?

I migrated from 7.5 to 9.3.1 a couple years back so hopefully this is somewhat helpful.
From a developer perspective, the report designer itself looks about the same. The most annoying changes for me were that they started migrating functionality AWAY from the client program and to the web. For instance, managing security is a pain as it is done through Workspace and it is a bit clunkly. I also ran into some issues where my old report's security information is not visible in Workspace. It is still 'working', but when you view report properties, it shows nothing for who has assigned security. Also, things like deleting/moving reports and creating folders are done through workspace and not the client program. "Copying" can be done through the client program by using "Save As" functionality.
There is a migration tool to move your old stuff to 9.3.1. It seemed to work OK; however, the User Interface was a bit screwy. For instance, it said I was 138% complete when it finished. It copied more reports than it showed as existing.... :)
On the back end, things changed quite a bit. In the older Financial Reports, the report objects existing in a single database table and if you wanted to, you could extract everything from that table. In 9.3.1, part of the information is in Workspace database (i.e. Report names/ID's, security access, hierarchy) and the actual report file itself is stored in a psedo-filesystem under the RM webapp. The names are not user friendly at all and you'll need to XREF from the database to make sense of it. When you finally find the actual report "file", they are compressed/encrypted.
From an end user perspective, things pretty much work the same way as always.

What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro? I purchased an "old" one from Best Buy the day before the announcement of the new models.

What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro? I purchased an "old" one from Best Buy the day before the announcement of the new models.

See the specs:
Compare Notebooks - Apple Store (U.S.)
Compare with your model. If you are within 14 days of purchase you can exchange for the new model for the difference in price, if any. Be sure to have all the original packaging and your receipt.

What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro?

What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro?

Note that iStatPro has not been updated in quite awhile and may not be reading the guts of a totally new system correctly. IIRC, the Late 2011 MBPs were beginning to tax iStatPro already, as they had newer sensors the older code was completely unaware of.
For strictly measuring temps on the guts of these newer Macs, maybe use Marcel Bresink's free Temperature Monitor? Last updated in March 2012. In my Late 2011 15" MBP, it picks up all 18 sensors...
http://www.bresink.de/osx/TemperatureMonitor.html
Or go whole hog for his Hardware Monitor, for oodles more info from the Mac. Follow the Products link from above.

What is the difference between logic studio academic version and the normal version ?

what is the difference between logic studio academic version from the other versions ?

No difference... the Academic version cannot be upgraded to the next major revision.
If you had putchased the Logic 9 academic version you get all the updates 9.0, 9.03, 9.1, 9.3...etc
When Logic 10 rolls around you would have to purchase the application at full price, your version isn't elgible for the upgrade price.
Same software as the retail version though.
pancenter-

Difference between BW on HANA, Native HANA and HANA Enterprise..?

Hi Experts,
I am learning SAP HANA modeling.
I am not able understand why there are three terminologies i.e., BW on HANA, NAtive HANA and HANA enterprise..
Could you please tell me the "Difference between BW on HANA, Native HANA and HANA Enterprise..?"""
I searched in sdn but not getting required info.
Please share the links if you have.
Thanks
Asha

Asha,
BW is a SAP Business Application, which can run on many traditional relational databases and on the SAP HANA database, BW on HANA is the BW application running on the HANA database, for details please see http://scn.sap.com/community/bw-hana/faq
Native HANA means in general that the code has been developed on HANA and specifically for HANA. For example BW has coding which can run on all databases which are certified for BW, and new code developed specifically for HANA = HANA native. Or another example, HANA studio is a native HANA application.
HANA enterprise is a license version of HANA. You can buy runtime licenses to run BW on HANA for example, and you can buy the enterprise license, which is a very comprehensive license to use many HANA capabilities. Please see your SAP account executive or SAP partner for details.
thank you
erich

What difference between weblogic 9.x,10.x and 11.x?

can any body tell me
what difference between weblogic 9.x,10.x and 11.x?
Regards,
Anil Kumar

for 11g, here is the list of new features
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13852/toc.htm
for the old versions, there must be a similar doc page somewhere...I am just too lazy to search for it :o)

Difference between IDOC segments starting with E1 and E2

Hi all,
What is the difference between IDOC segments starting with E1 and E2
Thanks

Hi Kajol,
A segment in SAP system is technically implemented as three physically separate pieces.
1. Segment type u2013 the version-independent name of the segment. Standard SAP names begin with E1.
2. Segment definition u2013 contains the fields which represent the data. Its maximum size is 1000 bytes. Standard SAP definitions start with E2 with the last 3 characters implying the version of the segment.
3. Segment documentation u2013 represents the data dictionary documentation for each field in the segment definition. It begins with E3 for SAP provided segments.
For example, E1EDP01 will be your segment type and E2EDP01003 will be your segment definition with 003 indicating its version.By default, the segment type points to the latest segment definition.
Kindly do reward points if you find this as useful.
Regards,
Aswin

Difference between Oracle database 10.2.01 and 10.2.0.1

What is the difference between Oracle database 10.2.01 and 10.2.0.1versions ?
Where can I download jdbc jars for both the versions?
Edited by: user13347335 on Jun 30, 2010 9:06 AM

user13347335 wrote:
What is the difference between Oracle database 10.2.01 and 10.2.0.1versions ?Probably a typo. It is officially 10.2.0.1
Where can I download jdbc jars for both the versions?http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_10201.html
Nicolas.

Difference between using app server connection pooling and using the driver

Hi all,
How to get connection pooling with out application server and tomcat also?
What is the difference between using app server connection pooling and using the driver supported connection pooling?
Regards,
Murali

maybe the performance of App server pool is better than the JDBC pool,
for you don't know wether the implementation of the JDBC interface is good or bad.

Difference between MSI 945PL NEO version 1 and 2

Similar Messages

Maybe you are looking for