Difference between routers and/or Whats better?

Hey, I currently have a WRT160N V2, I had it for a couple of years..
I been googling and searching for new and better routers but I dont know which one to choose.
I look here http://homestore.cisco.com/en-us/products/linksys_stcVVcatId551966VVviewcat.htm
And also http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1311&_nkw=linksys+wireless+router&_sacat=58058
I hope I can find one thats way better than the one I have for atleast under $120
Solved!
Go to Solution.

I recommend you getting the EA2700 for $99.99. click here
By the way if you are willing to add $30, it would be better to get the EA3500. click here

Similar Messages

What are the Difference Between "Rfx" and "Auction"?

Dear SRM Experts,
I am MM consultant; new to SRM.
I am trying to prepare list of difference between "RFx" and "Auction" for better understanding of the subject. I am able to see some differences, for example,
1. In Auction "Weights and Scores" tab is not available, where as this facility is not available in RFx?
(I hope this observation is correct?)
WHAT IS THE EXACT LIST OF DIFFERENCES?
Ganapathi

Hi,
In RFx there are three option
RFI- Request for Information.
RFQ- Request for Quoation
RFP- Request for Proposal
In Auction.
There are two types is Live Auction and Reverse Auction
In Rfx the time limit is in days -Start date and End date
In Auction the time limit is in Hours or minutes - Say 30 minutes or one hour
In RFX -once the bids are sent to the vendor you can change only upto the End date of the bid
In Auction -you can change any minutes or sec because it is a live auction
In RFX . you cannot able to see the price of the competitor
IN Live Auction -you can see the price of the competitor and you can bid.
Normally after RFX only the supplier wishes he can convet to LIVE AUCTION to get the better price.
For eg there are three vendors - A,B,C --The prices quoted are Rs 95, 96,97 respectively.
All the vendors are good. inorder to get the price advantage the supplier will convert the RFx into Live auction .
In that the supplier will get the prices say close to Rs 90 /- because of Live auction.
Regards
Ganesh Kumar .G

What is the difference between ws_upload and gui_upload

what is the difference between ws_upload and gui_upload
what is the difference between ws_download and gui_down load
pls tell briefly

Hi Kuamr,
UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Hope this resolves your query.
Reward all the helpful answers.
Regards

What is the Differences between Caingorm2 and Parsley(Caingorm3) ? Very Urgent ...plz help me out..

Hi all,
I am familier with caingorm 2 , and i am new to parsley , can any one give differences between caingorm2 and parsley(caingorm3) ?
and also please
1)how to create a BeanConfig.mxml configuration file in parsly ? how many ways we can inject beans in BeanConfig.mxml
2)and how the event dispatched in parsly and handled by parsley step-by step?
3)please explain by taking a small example insert usename and password in to data base using LCDS ?
thanks
-Balu

Hi
You can refer the following links for your question.
Difference between AET and EEWB
What is the use of AET? What are the differences between AET and EEWB?
Difference between EEWB - UI Configuration Tool - AET
http://senthilsapcrm.wordpress.com/2010/02/04/adding-custom-fields-in-sap-crm-7-0-using-aet/
What is the main difference between eewb and aet tool ?
Hope it is useful.
Thanks and regards
Preeti Viswanath

What is the use of AET? What are the differences between AET and EEWB?

Hi,
I would like to know about AET? What is the use of AET? What are the differences between AET and EEWB? Please help me out?
Thanks,
Satish

Hi
You can refer the following links for your question.
Difference between AET and EEWB
What is the use of AET? What are the differences between AET and EEWB?
Difference between EEWB - UI Configuration Tool - AET
http://senthilsapcrm.wordpress.com/2010/02/04/adding-custom-fields-in-sap-crm-7-0-using-aet/
What is the main difference between eewb and aet tool ?
Hope it is useful.
Thanks and regards
Preeti Viswanath

Could anybody explain what is the difference between cloning and refresh

Hi,
Could anybody explain what is the difference between cloning and refresh
What exactly we do in only E-business suite clone(Database and applications) and only database clone and refresh
Regards,
ravi

Welcome to the forum,
Database Cloning includes cloning the ORACLE_HOME of the database and the copying of data from source to target instance.
Database Refresh includes copying of data from source to target instance. ORACLE_HOME is not copied during a Database refresh.
Similarly Apps cloning includes cloning the techstack, i.e the 806, iAS homes along with APPL_TOP, COMMON_TOP and the Database
Apps refersh is again copying the database from source to target. The techstack or the APPL_TOP or COMMON_TOP are not copied during an Apps refresh
see this post
http://sabdarsyed.blogspot.com/2008/08/cloning-and-refreshing-oracle-database.html

Differences between awt and swing

Ive written the following code, however Ive implemented the gui in awt rather then swing. Ive been told it hs too be in swing. What is the difference between swing and awt what will I need to change in my program so that its done using swing rather then the awt? Heres the code:
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class: pp
// This class drives the customer manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends Frame implements ActionListener
// Container of customer objects
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private Button delete;
private Button update;
// Default constructor.
public pp ()
// Assign "Paper Round Manager" to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save customers and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem.
Label l = new Label ();
add ("North", l);
// Place the names component in the center part of the
// frame window.
add ("Center", names);
// Create a panel object to hold four buttons.
Panel p = new Panel ();
Button b;
// Add an Insert button to the Panel object and register
// the current pp object as a listener for button events.
p.add (b = new Button ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current pp object as a listener for button events.
p.add (delete = new Button ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one customer to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current pp object as a listener for button events.
p.add (update = new Button ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one customer to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current customer object as a listener for button events.
p.add (b = new Button ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
add ("South", p);
// Set the background of the frame window container to
// lightGray
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setSize (400, 200);
// Allow the user to resize the frame window.
setResizable (true);
// Load all contacts.
loadCustomers ();
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new pp object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected contact item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the contact item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new customer.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Contact object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.name + ", " + temp.publication);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all contacts from contacts.dat into the contacts
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("Customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.round = dis.readUTF ();
temp.address = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.name + ", " + temp.publication);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first contact item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all Customer objects from the customer Vector object
// to customer.dat. The number of customerss are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.round);
dos.writeUTF (temp.address);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the customer object (from the
// customers Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.round,
temp.address,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.name + ", " + temp.publication,
index);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);

Ive doen pretty much what you said burt now my program isnt working at all. The window comes up but instead of doing something when you click the button it just throws shit loads of exceptions. Heres my abridged code
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class:PP
// This class drives the Paper Round manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends JFrame implements ActionListener
// Container of customer objects (one object per customer)
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private JButton delete;
private JButton update;
// Default constructor.
public pp ()
// Assign Contact Manager to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save contacts and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem. (One thing that you'll come to realize as
// you work with the AWT is that there are lots of bugs.)
JLabel l = new JLabel ();
getContentPane().add ("North", l);
// Place the names component in the center part of the
// frame window.
getContentPane().add ("Center", names);
// Create a panel object to hold four buttons.
JPanel p = new JPanel ();
JButton b;
// Add an Insert button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current cm object as a listener for button events.
p.add (delete = new JButton ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one contact to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current cm object as a listener for button events.
p.add (update = new JButton ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one contact to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
getContentPane().add ("South", p);
// Set the background of the frame window container to
// lightGray (to give a pleasing effect).
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setBounds (50, 100, 400, 200);
// Do not allow the user to resize the frame window.
loadCustomers ();
// Load all contacts.
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new cm object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the customer item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new contact.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Customer object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String
(def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.publication + ", " + temp.address);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all customers from customers.dat into the customers
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.address = dis.readUTF ();
temp.round = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.publication + ", " + temp.address);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all customer objects from the contacts Vector object
// to customers.dat. The number of contacts are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.address);
dos.writeUTF (temp.round);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the Customer object (from the
// customer Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.address,
temp.round,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.publication + ", " + temp.address,
index);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);
// ========================================================
// Class: Customer
// This class describes the contents of a business customer.
// ========================================================
class Customer
public String name;
public String publication;
public String address;
public String round;
public String phone;
// ==========================================================
// Class: DataEntryForm
// This class provides a data entry form for entering customer
// information.
// ==========================================================
class DataEntryForm extends JDialog implements ActionListener
// bOk is a boolean flag. When true, it indicates that
// the Ok button was pressed to terminate the dialog box
// (as opposed to the Cancel button).
public boolean bOk;
// The following components hold the text that the user
// entered into the visible text fields.
public JTextField name;
public JTextField publication;
public JTextField address;
public JTextField round;
public JTextField phone;
public void actionPerformed (ActionEvent e)
// If the user pressed the Ok button, indicate this
// by assigning true to bOk.
if (e.getActionCommand ().equals ("Ok"))
bOk = true;
// Destroy the dialog box and return to the point
// just after the creation of the DataEntryForm object.
dispose ();
public DataEntryForm (JFrame parent, String title)
// Call the other constructor. The current constructor
// is used for insert operations. The other constructor
// is used for update operations.
this (parent, title, "", "", "", "", "");
public DataEntryForm (JFrame parent, String title,
String name, String publication,
String address, String round,
String phone)
// Initialize the superclass layer.
super (parent, title, true);
// Choose a grid bag layout so that components can be more
// accurately positioned. (It looks nicer.)
setLayout (new GridBagLayout ());
// Add appropriate first name, last name, phone, fax, and
// email components to the current DataEntryForm container.
// (Remember, DataEntryForm is a subclass of Dialog.
// Dialog is a container. Therefore, DataEntryForm
// inherits the ability to be a container.)
addComponent (this, new JLabel ("Name: "), 0, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.name = new JTextField (15);
addComponent (this, this.name, 1, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.name.setText (name);
addComponent (this, new JLabel ("Publications: "), 0, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.publication = new JTextField (15);
addComponent (this, this.publication, 1, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.publication.setText (publication);
addComponent (this, new JLabel ("Address "), 0, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.address = new JTextField (15);
addComponent (this, this.address, 1, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.address.setText (address);
addComponent (this, new JLabel ("Round No "), 0, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.round = new JTextField (15);
addComponent (this, this.round, 1, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.round.setText (round);
addComponent (this, new JLabel ("Phone Number "), 0, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.phone = new JTextField (15);
addComponent (this, this.phone, 1, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.phone.setText (phone);
addComponent (this, new JLabel (""), 0, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
addComponent (this, new JLabel (""), 1, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
JButton b;
// Add an Ok button to this container.
addComponent (this, b = new JButton ("Ok"), 0, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Add a Cancel button to this container.
addComponent (this, b = new JButton ("Cancel"), 1, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Set the size of the dialog window to 250 pixels
// horizontally by 200 pixels vertically.
setSize (250, 200);
// Do not allow users to resize the dialog window.
setResizable (false);
// Make sure that the dialog window is visible.
setVisible (true);
private void addComponent (Container con, Component com,
int gridx, int gridy,
int gridw, int gridh, int fill,
int anchor)
// Get the current layout manager. It is assumed to
// be a GridBagLayout object.
LayoutManager lm = con.getLayout ();
// Create a GridBagConstraints object to make it
// possible to customize component positioning.
GridBagConstraints gbc = new GridBagConstraints ();
// Assign the x and y grid positions.
gbc.gridx = gridx;
gbc.gridy = gridy;
// Assign the number of grid blocks horizontally and
// vertically that are occupied by the component.
gbc.gridwidth = gridw;
gbc.gridheight = gridh;
// Specify the component's resize policy (fill) and
// the direction in which the component is positioned
// when its size is smaller than available space (anchor).
gbc.fill = fill;
gbc.anchor = anchor;
// Set the new constraints that the grid bag layout
// manager will use.
((GridBagLayout) lm).setConstraints (com, gbc);
// Add the component to the container.
con.add (com);
// ===========================================================
// Class: MsgBox
// This class displays a message box to the user. The message
// is usually an error message. The user must press the Ok
// button to terminate the message box.
// ===========================================================
class MsgBox extends JDialog implements ActionListener
public void actionPerformed (ActionEvent e)
// Terminate the dialog box in response to the user
// pressing the Ok button.
dispose ();
public MsgBox (JFrame parent, String title, String msg)
// Initialize the superclass layer.
super (parent, title, true);
// Store the msg argument in a Label object and add
// this object to the center part of the dialog window.
JLabel l = new JLabel (msg);
add ("Center", l);
// Create a Button object and add it to the south part
// of the dialog window.
JButton b = new JButton ("Ok");
add ("South", b);
// Make the current object a listener to events that
// occur as a result of the user pressing the Ok
// button.
b.addActionListener (this);
// Make sure that the Ok button has the focus.
b.requestFocus ();
// Do not allow users to resize the dialog window.
setResizable (false);
// Allow the layout manager to choose an appropriate
// size for the dialog window.
pack ();
// Make sure that the dialog window is visible.
setVisible (true);
}

Difference between MVC2 and Struts

hi,
can anyone tell me the difference between MVC2 and struts.
pl tell me what has been eliminated in struts. and what has been added in struts etc..
thanks
ram

hi,
can anyone tell me the difference between MVC2 and
struts.What is the difference between a Skyscraper and the Empire State Building?
>
pl tell me what has been eliminated in struts. and
what has been added in struts etc..Please look up the Struts web page and read their documentation
>
thanks
ram

What's the difference between Aurora and Beta?

what's the difference between Aurora and Beta?

The difference between Beta and Aurora is '''1'''. If you have to ask what Aurora is, you shouldn't use it.
The current release version is Firefox 6.0, the Beta is 7.0, Aurora is 8.0, and Nightly is 9.0.
When Firefox 7.0 is released in 4 weeks, 8.0 will be the Beta version, Aurora will be 9.0, and the cutting edge Nightly development version will be 10.0.

What is the difference between Firefox and Firefox os please. I have a Samsung galaxy s3 mini what one would you recommend would be better for my phone

What is the difference between Firefox and Firefox os, and what one is better for the Samsung galaxy s3 mini, Please could you recommend which one is the best and most suitable for my phone please. Many thanks Michelle Petch

Thank you for your question.
Firefox is basically a browser.And Firefox OS is an Operating System.You can install Firefox in your SGS3 just like an android application.But if you want Firefox operating system on it. then you have to flash the ported Firefox OS on your device. Then it will be a completely different standalone operating system.you cannot install android applications on it.
To read more technical difference read:
Firefox OS:
http://en.wikipedia.org/wiki/Firefox_OS
Firefox Browser:
http://en.wikipedia.org/wiki/Firefox
Hope this clears your query.Thank you

What is the difference between avi and mov

Hi FCP users,
I am actually an audio guy, but I would like an answer on something.
I work with Logic, and usually use quicktime movies when I am working to movies. But I am working with a client who is an Avid user and swears by avi files. Can someone explain to me the difference. My client explained to me that avi's are better than mov files. He claims their file sizes are bigger, so therefore there quality is better. He said there is some form of compression on quicktime movies which lessen the quality to avi, even if the mov is uncompressed apparently the quality is still less than an uncompressed avi. If this is not true, could someone give me the real big difference between the two.
I thought is was more of a preference, like windows users prefer wav, and apple users like quicktime movies. Like with audio, there isnt a huge difference between aif and wav. Windows users prefer wav and apple users aif.
Thanks in advance for any information.

gazo wrote:
The vid guy has sent me some files to work with. So I am working in Final Cut to edit some of the video, and then sending it back to him. He is working on PC with Avid. What is the best. Should I convert the avi files he has sent to me to mov files. Then pull these into FCP, and then export it out as avi for him. Or should I export out as mov, and then he converts them to avi when he pulls it into Avid on his PC? Very confusing which is the best procedure between Mac and PC.
Thanks in advance for any help.
This is a disaster in the making. You can avoid being part of the train wreck by either renting an Avid, going to live at his house, or telling him to get a Macintosh.
You must find the lowest common denominator video format that will work on both of your systems. That could be conventional DV, dunno, never used Avid and never tried to edit anything on a PC. But I can tell you this with absolute certainty, it will be easier and, in the end, much less expensive for one of you to adopt the other's platform for the duration of this project. The time you waste transcoding, arguing, formatting your drives, buying secondary products, fitting round pegs into square holes, and trying to find a workable solution (that will keep changing as the project gets more complicated) will cost you much more in terms of money out of pocket and creative frustration than simply buying/renting another station.
bogiesan

What is the difference between apps and applications?

I have an application that I've been running on my older Mac. Now that I have a new MacBook Pro, I have to reinstall new software that is compatible. When I go to the vendor website I see an application I can download or a link to the Mac App Store. Is an application different than an app? When should you download them from a vendor website and when should you go to the app store? Do apps end up in the Launchpad and an application in your Applications folder? I can't seem to find information on what is the distinction. Are they actually two different things? Any help would be appreciated.

No difference between apps and applications. If you download the app from the Apple AppsStore you have better security and a conveninet place to have all your downloads. Nothing wrong with downloading from a trusted developer though.
EDIT: Yes they will either wind up in your Download folder as a .dmg you will have to double-click on to install, or most app store apps will install to your Applications folder.

Whats the difference between list and lov ?

Whats the difference between list and lov ?
i can do the same things with a list what an lov can do .
infact a list is more better. cause the list doesnt hold/show a range of values, and only has the items value iteself.
while the lov can get all the values of items depending on the query.
like
select ename, job, sal from emp
will show all the three items values in lov?

Also, if you're looking in the US store, the prices are:
- Airport Express (small, no ac) $99 - Has audio out for speaker connection using Airplay. Can share a USB printer only.
- Airport Extreme (larger, ac) $199 - No audio out, can share a USB printer or hard drive.
- Time Capsules (2TB, 3TB at $299, $399) - have ac wireless and a backup hard drive for Time Machine which the other Airports do not have.
Matt

Whats the difference between Fatal1ty and Fatal1ty USB heads

Whats the difference between Fatal1ty and Fatal1ty USB headset? What is the $30 price difference for other than a USB connection?
Also, what is the advantage to using the USB port?
Still trying to decide on which headset to buy. I will be using these mainly for gaming and some music. Although i'm not real picky when it comes to music quality. Even considered the HS-1200 wireless. Which headset of these 3 has the best sound quality and better quality?
Message Edited by iowabucks on 10-20-2008 07:54 AM
Message Edited by iowabucks on 10-20-2008 08:10 AM

Any USB sound related item is going to use system resources instead of the non usb version. The non usb version uses the resources of the sound card and not system resources. So you should get cleaner sound with the non usb version.
But, be aware creatives tech support is not the best in the world. Keep that in mind when buying a product from them.

What's the difference between SNC and SRM?

we will sell SNC in Q2.But i don't know what is the difference between SNC and SRM.
i've heard SNC suit Direct procurement better than SRM...
Pls give me the advice and information.
good regards kenji

Hi Kenji,
SRM is more of Supplier Identification and SNC work of building
relationship with Supplier starts after this Supplier identification.
SNC is very Good tool to handover Inventory replenishemnt
to Suppliers and it gives Visibility of inventory information over Web UI.
SNC has many processes like PO Collaboration, SMI, DR,DCM, SNI,
Invoice Collaboration,Release process...to accomplish above mentioned task.
SNC is designed for direct materials procurement.
SRM has contract negotiations,bids,auctions for sourcing to identify suppliers
SRM is good for basic purchasing fuctionality and suitable for indirect materials.
In addition to all these SNC has Customer Collaboration functionality also.
Regards,
Vasu

Difference between routers and/or Whats better?

Similar Messages

Maybe you are looking for