Different applications context in iStore

Vi have implemented severel minisites in iStore and have a question regarding using different context for different minisites.
Is it possible to configure the iStore in a way that different minisites can have different applications context?
For instance:
Insted of using common URL like
http://server.domain.com/OA_HTML/ibeCZzpHome.jsp?a=b
We wnat to use
http://server.domain.com/OA_DOGS/ibeCZzpHome.jsp?a=b
http://server.domain.com/OA_CATS/ibeCZzpHome.jsp?a=b
So OA_DOGS always refer to a perticular miniSite (minisite=10020)
and OA_CATS always refer to another miniSite (minisite=10021)
Thanks Mayu

you were not asking for a seperate ministed for different users instead ur asking for a different applications under one single domain.
but we can have any number of minisites to address your need, just need to create them using iStore Admin responsibility, if you want to restrict some of the users to access to some of the minisites only then go for responsibility key / operating unit differentiation or see CRM Administration - Roles and Responsibilites to implement the requirement.
there you can define 2 different responsibilities like IBE_CUSTOMER_DOGS who can only access the sites you allow him in iStore Admin, IBE_CUSTOMER_CATS allowed to see only minisites meant for CATS .
thanks
Praveen Reddy

Similar Messages

Swtiching between different application context

Hi All,
In my application we have use BSP framework as web application context say app1 . In this we have used flex code (swf file )as an application UI. Now we have another application context is app2 which provides the HTTP service on implementing the interface IF_HTTP_EXTENSION . The requirement is the first incoming call from browse should always point to app1 using url http://host:port/appl1/index.html which would send the swf file as a response to the browser.
This would load the swf on client i.e on browser . User does some action which should now call the application context app2 . If we go with this approach there are 2 session which gets created . What we want is to have application context swtiching from app1 to app2 is it possible ? Is this the right approach ??
Best Regards,
Mitul

Xtanto,
actually you can't if these are separate J2EE application deployments. The session is not shared and thus the authentication is lost. I heard that OracleAs is planning to implement a feature that allows you to share the session and thus a context between two J2EE deployments. I am not 100 % sure this is the case and will check with OC4J Product Management
Frank

Application Context - VPD

APEX: 2.0.0.00.49
DB: 10R2
I am using table based security. Upon login, I am setting a number of different context variables (e.g., sessionid, userid, name, etc). They are also being set in my application (F100_SESSIONID, F100_USERID, etc).
Recently, our company decided to host another company's data. Not having EE, I decided to add a column to the appropriate tables and then create views accessible through the application. Each view would have a predicate: 
WHERE companycode = SYS_CONTEXT( 'PFS_CTX', 'COMPANYCODE' ) 
Now, after submit, (I haven't tested every single page), session state seems to be lost. 
Debug info before Submit: 
0.00: S H O W: application="100" page="26" workspace="" request="" session="12483598699829578467"
0.00: ...Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.00: alter session set nls_language="AMERICAN"
0.00: alter session set nls_territory="AMERICA"
0.00: NLS: CSV charset=WE8MSWIN1252
0.00: ...Setting NLS Decimal separator="."
0.00: ...Setting NLS Group separator=","
0.00: ...Setting NLS date format="DD-MON-RR"
0.00: NLS: Language=en-us
0.00: Application 100, Authentication: CUSTOM2, Page Template: 653625525474071
0.02: ...Supplied session ID can be used
0.02: ...Application session: 12483598699829578467, user=USER_PFS
0.02: ...Determine if user PFS_ADMIN with SGID 635206529335328 can develop application 100 in workspace 635206529335328
0.02: Fetch session state from database
0.02: Fetch session header information
0.02: ...fetch page attributes: f100, p26
0.02: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.03: Computation point: BEFORE_HEADER
0.03: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER 
The Select List I have renders correctly. The query behind the Select List is: 
SELECT projectname, projectid
FROM pnet_projects 
The view text is: 
SELECT projectid, projectname,...
FROM vw_projects
WHERE companycode = SYS_CONTEXT( 'PFS_CTX', 'COMPANYCODE' ) 
After Submit, the Select List is empty and here is the Debug info: 
0.00: A C C E P T: Request="SUBMIT"
0.00: Fetch application info
0.00: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
0.00: alter session set nls_language="AMERICAN"
0.00: alter session set nls_territory="AMERICA"
0.00: NLS: CSV charset=WE8MSWIN1252
0.00: ...Setting NLS Decimal separator="."
0.00: ...Setting NLS Group separator=","
0.00: ...Setting NLS date format="DD-MON-RR"
0.02: Fetch session state from database
0.02: ...Check instance 12483598699829578467 owner
0.02: ...Fetch iconbar, page, computation, process, ...
0.02: Fetch session header information
0.02: ...fetch page attributes: f100, p26
0.02: ...Check security schemes
0.02: Save form items and p_arg_values
0.02: ...P26_PROJECTID session state saving same value: "NONE"
0.02: ...P26_TIMEIN session state saving same value: ""
0.03: ...P26_PERSONID session state saving same value: ""
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Display inline error messages that are a result of failed validations.
0.03: S H O W: application="100" page="26" workspace="" request="" session="12483598699829578467"
0.03: NLS: Language=en-us
0.03: Application 100, Authentication: CUSTOM2, Page Template: 653625525474071
0.05: ...Supplied session ID can be used
0.05: ...Application session: 12483598699829578467, user=USER_PFS
0.05: ...Determine if user PFS_ADMIN with SGID 635206529335328 can develop application 100 in workspace 635206529335328
0.05: ...fetch page attributes: f100, p26
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Computation point: BEFORE_HEADER
0.05: Processing point: BEFORE_HEADER
0.05: ......do not perform process because inline validation condition found.
0.05: ...Recompute field lables for fields in error.
0.05: Show page template header
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER 
In the ACCEPT portion, there's a line "Fetch session state from database" which I am guessing gets the Application Context. There is no such line in the SHOW section. 
I have used Branch to Page Identified by Item and a Branch to Page or URL. Same result. 
Does anyone have a suggestion as to how I should proceed? Can I use APEX/Application Context in this manner? 
chet

FUNCTION login
(p_username IN VARCHAR2,
 p_password IN VARCHAR2,
 p_systemcode IN VARCHAR2 DEFAULT 'PFS') RETURN NUMBER
IS
l_sessionid NUMBER(15);
l_password PERSON_SYSTEMS_TAB.PASSWORD%TYPE;
l_personsystemid PERSON_SYSTEMS_TAB.PERSONSYSTEMID%TYPE;
l_personid PERSON_SYSTEMS_TAB.PERSONID%TYPE;
l_passwordexpires PERSON_SYSTEMS_TAB.PASSWORD_EXPIRES%TYPE;
l_accountlocked PERSON_SYSTEMS_TAB.ACCOUNTLOCKED%TYPE;
l_expiredate DATE;
l_entityid ENTITY_TAB.ENTITYID%TYPE;
l_companyname VARCHAR2(150);
l_companycode VARCHAR2(30);
BEGIN
SELECT password, personsystemid, personid, password_expires, accountlocked, date_expired, companycode
INTO l_password, l_personsystemid, l_personid, l_passwordexpires, l_accountlocked, l_expiredate, l_companycode
FROM vw_person_systems
WHERE systemcode = p_systemcode
 AND date_expired IS NULL
 AND UPPER( username ) = UPPER( p_username );
IF l_password = p_common.hash(p_username, p_password) THEN --successful login
--1 create session
--2 set app context
--3 return sessionid
 l_sessionid := create_session( l_personsystemid );
 l_companyname := p_common.get_company_name( l_personid );
 l_entityid := p_common.get_entityid( l_personid );
 p_ctx.set_sessionid( l_sessionid );
 p_ctx.set_context( 'NAME', p_login.get_name( l_personid ) );
 p_ctx.set_context( 'PERSONSYSTEMID', l_personsystemid );
 p_ctx.set_context( 'PERSONID', l_personid );
 p_ctx.set_context( 'COMPANYID', SUBSTR( l_companyname, 1, INSTR( l_companyname, ':' ) - 1 ) );
 p_ctx.set_context( 'COMPANYNAME', SUBSTR( l_companyname, INSTR( l_companyname, ':' ) + 1, LENGTH( l_companyname ) ) );
 p_ctx.set_context( 'SESSIONID', l_sessionid );
 p_ctx.set_context( 'EMAILADDRESS', p_username );
 p_ctx.set_context( 'ENTITYID', l_entityid );
 p_ctx.set_context( 'COMPANYCODE', l_companycode );
END IF;
RETURN l_sessionid;
EXCEPTION
WHEN no_data_found THEN
 raise_application_error(-20002, 'invalid username');
END login; 
None of this code has changed in quite some time. The only thing that changed was the view reference from APEX. This seems to occur only when the page is submitted (with or without validations).

Application contexts in multi-user environments

[Oracle9i Enterprise Edition Release 9.2.0.3.0]
Hi,
I'm experimenting with application contexts as a means of utilizing bind variables in variable WHERE clauses.
In a multi-user environment where the database is accessed from an application using a single user id, are there any conflicts involved when the same procedure is accessed multiple times and the same context variable is set to different values by each call? In other words, can I assume that between the time the user_id of my_context is set and the query is executed in procedure call 1 that those values will be used and not be affected by other procedure calls also setting the user_id of my_context?
Thanks,
Ed Holloman
================================================
create or replace context my_context using my_proc;
================================================
In procedure call 1 to my_proc:
================================================
my_query := 'SELECT * FROM my_table ' ||
'WHERE user_id = sys_context(''my_context'',''user_id'')';
dbms_session.set_context('my_context', 'user_id', '12345');
OPEN my_refcursor FOR
my_query;
================================================
In procedure call 2 to my_proc:
================================================
my_query := 'SELECT * FROM my_table ' ||
'WHERE buyer_id = sys_context(''my_context'',''user_id'')';
dbms_session.set_context('my_context', 'user_id', '45678');
OPEN my_refcursor FOR
my_query;
================================================
etc.

A quick little test shows John's statement in action:
sql>create or replace procedure test_procedure
2    (p_value in pls_integer,
3     p_rc    out sys_refcursor)
4 is
5 begin
6    dbms_session.set_context('TEST_CONTEXT', 'VALUE', to_char(p_value));
7    open p_rc for select sys_context('TEST_CONTEXT', 'VALUE') from dual;
8 end;
9 /
Procedure created.
sql>var rc1 refcursor
sql>var rc2 refcursor
sql>exec test_procedure(1, :rc1)
PL/SQL procedure successfully completed.
sql>exec test_procedure(2, :rc2)
PL/SQL procedure successfully completed.
sql>print rc2
SYS_CONTEXT('TEST_CONTEXT','VALUE')
2
1 row selected.
sql>print rc1
SYS_CONTEXT('TEST_CONTEXT','VALUE')
1
1 row selected.Note the original value (1) has not been stomped on by the second execution even though we fetched this after that second execution and fetch sequence.

Report Export - No data when query based on Application Context

I updated my Query Region source to use a Global Application Context and now the Report Export (to .csv) download has no data. This appears to run the query again in under a different session_id perhaps(?)
In a before header process I set the session_id to access a couple of date values set by the user via LOVs - the 'Search' button and an After Submit Process sets the context values which are accessed in the where clause, i.e
where date_attribute between to_date( SYS_CONTEXT('MY_CTX', 'START_DATE'), 'dd-Mon-yyyy')
and to_date( SYS_CONTEXT('MY_CTX', 'END_DATE'), 'dd-Mon-yyyy')
If you know any solution or alternative approach I'd be very grateful for your tips. I like Apex because you can leverage core Oracle database technology but then in some case you do hit these little troubles!
Thanks
Craig

Thanks for the link to the posts.
I considered the Security Attribute but thought that was somewhat inappropriate for just the one page I am setting the context; I understand the Security Attribute function would set 'My_Ctx' values on all page requests.

Application Context Security

Is there any limitations on the value that the Application Context can hold?

Dear Frank,

Instead you have a single identity management system and have the application policies being different for the applications.Using ADF Security, users and groups can have different privileges in different applications

suppose i have 3 applications that use adf security, the users will be common to all applications. right..?Roles and group can be different for applications.
application polices means roles and group..?
So how it(application polices) can be made different for applications? is it inbuilt or some configurations needed ?. Can you point me to some blogs or tutorials for more reference.
Bet: Incase i hook up adf security with database schema.
Regards,
Santosh.

Including a file in a JSP from a different application

I have two different applications deployed in a Java Application Server 7 (their context root are "\Start" and "\Portal"). The second one uses a JSP of the first one doing like this:
File: \Portal\index.jsp
<%@include file="/Start/control.jsp"%>
But I get a "File not found error" of file "\Start\control.jsp" when I call "/Portal/index.jsp" in the browser.
On the other hand, when I call direclty that page from the browser using the URL "http://server/Start/control.jsp", this page works properly.
I have read in JSP documentation that if you put the forward slash "/" before the name of file, the include directive uses an absolute path instead of relative path.
According to this theory, the include directive in "/Portal/index.jsp" should find the file and copy the content into index.jsp before compilation, but it does not work.
I have try this sample in other environments such as JRun and Tomcat and I works properly.
Is this a specific thing of Java Application Server 7?
Can I do something to solve this problem?
Thanks in advance

This would be very useful to integrate static content HTML into the JSP page from an absolute path related to the site not only to the application (the WAR file).
But what about to include into a JSP page the content of another JSP page before the compilation into a servlet.
I mean ...
I have a JSP file in this path of the Web site "/Start/control.jsp" that it is deploy using the WAR file Start.war.
I have another JSP file in this path of the Web site "/Portal/index.jsp" that it is deploy using the WAR file Portal.war.
As we have seen, they are different applications so if I put into file "/Portal/index.jsp" the line
<%@include file="/Start/control.jsp"%>
, it does not work
if I put into file "/Portal/index.jsp" the line
<io:request url="/Start/control.jsp"/>
, it does not work because there are some objects define in the control.jsp file (for instance, a variable called "name") that are used in the index.jsp file and in time of compilation, a line in generated with this code:
out.write("<io:request url=\"/Start/control.jsp\"/>\r\n");
but there is no a copy of content of control.jsp in index.jsp before trying conversion to servlet. So when compilation goes on, it produces an error because it says that the variable "name" has not been declared (and the declaration is inside control.jsp).
That's way I need a sentence to include the code of a JSP into another JSP before compilation. A kind of concatenation of files or something similar previous to conversion and compilation to servlet.

Setting Application Context Attributes for Enterprise Users Based on Roles

Hello,
We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Private Database feature to enforce row-level security on the table.
I did a successful proof-of-concept with database users. I created a role for each site (example: USER_SITE_A, USER_SITE_B, ...), and then assigned the appropriate site roles to each database user. I then created a package (run via a logon trigger) which set application context attributes for each site. If the current database user has been assigned a role for a given site, then the corresponding attribute named "SITE_PRIVILEGE_SiteID" is set to 'Y'... otherwise, it is set to 'N'. Here is the code which worked to set application context attributes for database users:
-- For each record in my RoleSitePrivileges table, set
-- an attribute named 'SITE_PRIVILEGE_<SiteID>'.
-- If the current user has been assigned a role matching
-- the value in the 'RoleName' field, set the corresponding
-- attribute to 'Y'... otherwise, set it to 'N'.
FOR iPrivRec IN (SELECT RoleName, SiteID
 FROM RoleSitePrivileges
 ORDER BY SiteID)
 LOOP
 SELECT COUNT(*)
 INTO roleExists
 FROM dba_role_privs
 WHERE granted_role = UPPER(iPrivRec.RoleName)
 AND grantee = USER;
 IF roleExists > 0 THEN
 DBMS_SESSION.set_context(
 namespace => 'my_ctx',
 attribute => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
 value => 'Y');
 ELSE
 DBMS_SESSION.set_context(
 namespace => 'my_ctx',
 attribute => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
 value => 'N');
 END IF;
 END LOOP;To finish things off, I created a security policy function for the table which returns the following:
RETURN 'SiteID IN (SELECT TO_NUMBER(SUBSTR(attribute, 15))
 FROM session_context
 WHERE attribute LIKE ''SITE_PRIVILEGE_%''
 AND value = ''Y'')';This setup worked great for database users. I am now working to do a comparable proof-of-concept for enterprise users created in Oracle Internet Directory (OiD). I have Enterprise User Security (EUS) up and running with OiD, global roles created in the database, enterprise roles defined in EUS with global role assignments, and enterprise roles assigned to OiD users. The enterprise users are able to successfully login to the database, and I can see the appropriate global role assignments when I query the session_roles view.
I tried using the same application context package, logon trigger, and security policy function with the enterprise users that I had used with the database users. Unfortunately, I found that the application context attributes are not being set correctly. As you can see from the code above, the applicaiton context package was referencing the dba_role_privs view. Apparently, although this view is populated for database users, it is not populated for enterprise users.
I tried changing the application context package to use invoker's rights and to query the session_roles view instead of the dba_role_privs view. Although this package sets the attributes correctly when called manually, it does not work when called from the logon trigger. That was an oops on my part, as I didn't realize initially that a PL/SQL procedure cannot be called with invoker's rights from a trigger.
So, I am now wondering, is there another view that I could use in code called from a logon trigger to access the roles assigned to the enterprise user ? If not, is there a better way for me to approach this problem? From a maintenance standpoint, I like the idea of controlling site access from the LDAP directory service via role assignments. But, I am open to other ideas as well.
Thank you!

Hello,
We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Private Database feature to enforce row-level security on the table.
I did a successful proof-of-concept with database users. I created a role for each site (example: USER_SITE_A, USER_SITE_B, ...), and then assigned the appropriate site roles to each database user. I then created a package (run via a logon trigger) which set application context attributes for each site. If the current database user has been assigned a role for a given site, then the corresponding attribute named "SITE_PRIVILEGE_SiteID" is set to 'Y'... otherwise, it is set to 'N'. Here is the code which worked to set application context attributes for database users:
-- For each record in my RoleSitePrivileges table, set
-- an attribute named 'SITE_PRIVILEGE_<SiteID>'.
-- If the current user has been assigned a role matching
-- the value in the 'RoleName' field, set the corresponding
-- attribute to 'Y'... otherwise, set it to 'N'.
FOR iPrivRec IN (SELECT RoleName, SiteID
 FROM RoleSitePrivileges
 ORDER BY SiteID)
 LOOP
 SELECT COUNT(*)
 INTO roleExists
 FROM dba_role_privs
 WHERE granted_role = UPPER(iPrivRec.RoleName)
 AND grantee = USER;
 IF roleExists > 0 THEN
 DBMS_SESSION.set_context(
 namespace => 'my_ctx',
 attribute => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
 value => 'Y');
 ELSE
 DBMS_SESSION.set_context(
 namespace => 'my_ctx',
 attribute => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
 value => 'N');
 END IF;
 END LOOP;To finish things off, I created a security policy function for the table which returns the following:
RETURN 'SiteID IN (SELECT TO_NUMBER(SUBSTR(attribute, 15))
 FROM session_context
 WHERE attribute LIKE ''SITE_PRIVILEGE_%''
 AND value = ''Y'')';This setup worked great for database users. I am now working to do a comparable proof-of-concept for enterprise users created in Oracle Internet Directory (OiD). I have Enterprise User Security (EUS) up and running with OiD, global roles created in the database, enterprise roles defined in EUS with global role assignments, and enterprise roles assigned to OiD users. The enterprise users are able to successfully login to the database, and I can see the appropriate global role assignments when I query the session_roles view.
I tried using the same application context package, logon trigger, and security policy function with the enterprise users that I had used with the database users. Unfortunately, I found that the application context attributes are not being set correctly. As you can see from the code above, the applicaiton context package was referencing the dba_role_privs view. Apparently, although this view is populated for database users, it is not populated for enterprise users.
I tried changing the application context package to use invoker's rights and to query the session_roles view instead of the dba_role_privs view. Although this package sets the attributes correctly when called manually, it does not work when called from the logon trigger. That was an oops on my part, as I didn't realize initially that a PL/SQL procedure cannot be called with invoker's rights from a trigger.
So, I am now wondering, is there another view that I could use in code called from a logon trigger to access the roles assigned to the enterprise user ? If not, is there a better way for me to approach this problem? From a maintenance standpoint, I like the idea of controlling site access from the LDAP directory service via role assignments. But, I am open to other ideas as well.
Thank you!

FGAC Application context problem

I create a context name 'test_ctx' that I set using a procedure in a package. I plan to call this procedure in a middle tier. During testing, when I connect to the Db, it seems that the context has values in it even when I did not call the procedure. Even when I disconnected from the Db and then reconnected after a few minutes, it seems that the context is still set. There is no other application or user using this context. Can anyone tell me what is happening? Thanks.

Hi there
* An application context can be most easily understood as the root folder your application starts from, e.g.
You are running a Tomcat server on your local machine and have deployed 2 applications to there: myapp1.war and myapp2.war. Those 2 apps would be hosted at http://localhost/myapp1/ and http://localhost/myapp2/ respectively.
Another way of looking at it is that application contexts are used to separate different applications running on the same web server.
* servlet mapping is what you need to do in order to map requests to your servlet container to the actual servlets themselves.
e.g. a call to http://locahost/my_webapp/my_servlet might actually map to a servlet called MyFirstServlet which in turn is represented by your deployed MyFirstServlet.class
There is of course a lot more to both of these, I suggest you start with the tutorial on Servlet development here on the Sun site.
Cheers,
Martin (aka Karianna)
Edited by: karianna on Dec 10, 2007 8:16 AM

Global Application Contexts - Where to set Client Identifier?

Hi,
I am trying to use global application contexts as part of an implementation of fine grain access control.
This is within an eBusiness Suite environment, specifically CRM, so is a multi-tiered environment.
Users access both Forms based screens and OA framework screens.
I believe I need to use global application contexts as users may have multiple database sessions.
Also, all users will login using the same database login account.
Provided I can set a unique identifier for a user that persists throughout all their sessions I can make use of the username and client_id parameters of set_context, below:-
DBMS_SESSION.set_context (namespace => 'XXUOM_CONTEXTS',
attribute => 'EXEMPT_FROM_VPD_POLICIES',
VALUE => l_exempt,
username => USER,
client_id => pi_user_id);
The difficulty I am having is finding a suitable place to set the client identifier.
I am not sure if the value is being cleared by some other code or if the value isn't being set in all sessions.
I am using:-
DBMS_SESSION.set_identifier (pi_user_id)
That I call from after insert triggers on either tables icx_sessions or fnd_logins.
However, the client identifier is always null when I query it from within the application, via:-
SELECT SYS_CONTEXT ('USERENV', 'CLIENT_IDENTIFIER') from dual
If I set the value via a personalisation rule within a Form, then the value remains.
I would greatly appreciate it if someone can advise me on where I am going wrong.
Andy

It's a different patch.
The patch support have given me is 9275708, FND_GLOBAL.ORG_NAME RETURNS ENGLISH, EVEN WHEN SESSION LANGUAGE IS NOT.
This patch has been superceded by 12875860, HR SECURITY PROFILE IS NOT SET CORRECTLY.
So we have applied patch 12875860.
I've tried to find out from support what happened to the original patch and why it was removed/deleted rather than superceded.
I have not found it possible to find out what each of these patches does. There's very little documentation on them.
I have raised an SR.
The details are 3-4943519401: How to add DBMS_SESSION.SET_IDENTIFIER() to FND_GLOBAL.INITIALIZE.
The results of:
     select fnd_profile.value('FND_CONNECTION_TAGGING') from dual
     gives nothing on our Release 11 environment.
select * from fnd_profile_options where profile_option_name = 'FND_CONNECTION_TAGGING';
gives nothing.
On Release 12, the results are:
     select fnd_profile.value('FND_CONNECTION_TAGGING') from dual;
     ENABLED
     select * from fnd_profile_options where profile_option_name = 'FND_CONNECTION_TAGGING';
     returns a record.
Many thanks for continuing to look into this for me.
Andy

Sending a message to different application server

Hi all
I have a session bean that send message to a message driven bean in the same application server.
I wonder how to send the same message to a message driven bean in a different application server.
Is Context.PROVIDER_URL (jndi hard coding) important for that matter?

anyway if i do not want use jndi.properties file it's enough specifing the Context.PROVIDER_URL pointing to the new jboss server???
// hard coding configurazione jndi
          Properties properties = new Properties();
          properties.put(Context.INITIAL_CONTEXT_FACTORY,
          "org.jnp.interfaces.NamingContextFactory");
          properties.put(Context.URL_PKG_PREFIXES, "org.jnp.interfaces");
          properties.put(Context.PROVIDER_URL,
          "xxxxxxx");
          try {
               initialContext = new InitialContext(properties);
          } catch (Throwable ex) {
               throw new ExceptionInInitializerError(ex);
          }

Getting values from application context

I want to set an input box with the value from the jsp getRemoteHost() in jsf page..
In my page i have this
<h:inputText value="#{sok.Searchstring}">...
where the reference sok is a java bean
public class sok
 private String Searchstring;
 public sok()
 // I want to set the Searchstring = getRemoteHost()
 public String getSearchstring()
 return this.sokVerdi;
 public void setSearchstring(String data)
 this.sokVerdi = data;
}How can this be done? Should I avoid using http request.. couldn't I get it from the application context, and how do I do that?? I'am kinda empty on ideas to solve this very issue.

I getting the getRemoteHost to work perfectly.. and as for getParameter() too.. but when I try doing getRemoteUser(), it gives me null.. I also did getRemoteUser() in the jsf file, and there I do get the right output..
How come? Why do I not get the correct value from the java bean?
public sok()
 ExternalContext externalContext = FacesContext.getCurrentInstance().getExternalContext();
 HttpServletRequest httpServletRequest = (HttpServletRequest)externalContext.getRequest();
 sokVerdi = "h: " + httpServletRequest.getRemoteUser();
 //sokVerdi = "g: " + httpServletRequest.getParameter("fardin");
 //sokVerdi = "g: " + httpServletRequest.getRemoteHost();
 }

Access to different application in same server

Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services

Only the classfiles of any user-defined classes/interfaces that are possibly used
as parameters or return values from the methods in the home/remote interfaces. If
you aren't doing that, then the home and remote interfaces is all you need.
Bill
Perry Hoekstra wrote:
[email protected] wrote:
Hrm. It's no different from accessing EJB's deployed in the same application
(EAR) except that local calls are no longer possible.
Perry Hoekstra <[email protected]> wrote:
Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services--
DimitriI should have explained myself better. I was thinking more from a
packaging point of view. Beside the remote and home interfaces of the
called bean, are there any other files necessary to be packaged with the
calling bean ejb.jar?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services
[email protected]

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!

Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash

In a single program how to lookup different EJB from different application

Hi,
I have deployed two applications app1 and app2 on oc4j.
There is a stateless session bean in a1 called ejb1.
And there is also a stateless session bean ejb2 in app2.
I write a test jsp in app1 to lookup ejb1 and ejb2 as an application client. So I need to create an application-client.xml for it.
<?xml version="1.0"?>
<!DOCTYPE application-client PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN" "http://java.sun.com/j2ee/dtds/application-client_1_2.dtd">
<application-client>
<display-name>ejbs</display-name>
<ejb-ref>
<ejb-ref-name>ejb1</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>class_of_ejb1Home</home>
<remote>class_of_ejb1</remote>
</ejb-ref>
<ejb-ref>
<ejb-ref-name>ejb2</ejb-ref-name>
<ejb-ref-type>ejb2</ejb-ref-type>
<home>class_of_ejb2Home</home>
<remote>class_of_ejb2</remote>
</ejb-ref>
</application-client>
However, When I run the test.jsp, It will report following error:
javax.naming.NamingException: Error reading application-client descriptor: No location specified and no suitable instance of the type 'class_of_ejb2' found for the ejb-ref ejb2
In fact, if I only lookup any of the ejb and the application-client.xml just specify only the according ejb-ref, everything is alright.
But how to construct the application-client.xml so that it can suitable for 2 different ejb in different application? Do I miss something in doing it?
Kindly advice!
Queeny Tang

Hi Debabrata Panda,
I did add parent in web.xml, but it still encounter
"Error reading application-client descriptor: No location specified and no suitable instance of the type 'class_of_ejb2' found for the ejb-ref ejb2"
In my program, a jsp in app2 will lookup ejb1 of app1. In the same way, a jsp in app1 will lookup ejb2 of app2.
if I declare in server.xml
<application name="app2" path="../applications/app2.ear" parent="app1" auto-start="true" />
<application name="app1" path="../applications/app1.ear" parent="app2" auto-start="true" />
That will cause error reading application-client.xml for all
ejbs.
How to solve this.
Thanks in advance!
Yours Queeny

Different applications context in iStore

Similar Messages

Maybe you are looking for