Different index used in same code segments

Hi,
I noticed the following peculiar behaviour when trying to troubleshoot the long running time of an ABAP :
1) while doing an SQL trace (ST05) of the long running program, the trace results show that index "A" was being used.
2) when I took that particular SELECT code segment of the program and ran it by itself, the trace results showed that index "B" was used and that the data retrieval was very fast
It is obvious that index "A" is the incorrect index to be used but how do we "influence" the use of index "B" (the correct index) to be used during program runtime?
And why did the program use the incorrect index in the first place?
Has anyone encountered similar situation?
Thanks in advance.

Hi Thomas & Siegfried,
Thanks for your replies.
Point noted. Will investigate further.
Regards

Similar Messages

Use the same code module for several steps in the sequence

Hello All,
I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands. I have gotten as far as calling the VI in a new thread so that it can be run asynchronously. I can run the simple sequence and it will indeed open the VI, and move on to the next step. When I close the VI manually from the front panel, the sequence in TestStand completes, as expected. So it appears that I have that much working.
My question is how to call the separate thread from the main sequence or other sub sequences when I need to edit the parameters. If I insert an Action step, I am required to select a VI file, but from what I can tell, it opens a different instance of the file, and does not provide an interface with the other instance running asycronously. My next guess was to use a Statement step, but I was not able to figure out how to configure the lookup string to call the VI parameters. Beyond that, I'm not sure how to proceed. Please advise.
My intention is to start the code module VI (asynchronously), run several different subsequences within the main sequence that call that same VI and edit it's parameters, close everything and report on the results. If I am misunderstanding how TestStand is supposed to work, please let me know.
Thanks,
GSinMN
Solved!
Go to Solution.

What I do is use a Queue to send data to the asynchronous VI. So it can run and do whatever, but also recieve the commands from the queue. I use an Action Engine that holds the queue reference and sends the commands. So you really just have to call the Action Engine from your sequences.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can 2 different users with 2 different Iphones use the same itunes to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

Here is your answer:
http://support.apple.com/kb/HT1495

Can I download itunes on two different computers using the same apple id?

Can I download itunes on two totally different computers using the same apple id and go back and forth between them (ie home computer and work computer)?

You can use a laptop to set up multiple devices with the same apple ID and you can maintiain different content on each device.

Two very different results using the same settings (H.264 / Quicktime Pro)

I’m a bit confused, I have used Quicktime Pro (v7.1) to encode DV into H.264 for iPod and this particular video is 18 minutes long and came out looking very good with the following settings;
VIDEO: H.264 at 200kbps, Baseline Profile, 25fps, Auto Key Frames, 320x240 or 640x480, Multipass Best quality encoding.
AUDIO: AAC Audio at 96kbps, 24kHz sampling freq, Stereo.
However here is the twist…
When I use the same exact settings to encode just the 30 second opener (from the 18 minute video) the encoded opener looks bad and blocky!
Why? Same settings would make you assume that you should get a same or similar result, or am I wrong?
The reason I have tried encoding this 30 second opener is that I am trying to work out which settings work best on the iPod (another issue) and I don’t want to spend hours test encoding the full 18 minute video, as you know H.264 is SLOW to encode!
So can anyone help in regard to two very different results using the same settings?
Regards,
J
PC Windows XP

Alvin,
Is it a commercially-released or home-burned CD?
If it's commercially-released, try "encouraging" the recalcitrant computer by using the iTunes Advanced menu > Get CD Track Names command when it shows Audio CD.
If it's home-burned, you will find that only the computer that actually burned the disc will know what's on it. The information won't be transferred to another computer.
Let us know which, if either, of these situations applies to you.

Selecting two different Names using the same table with same field

Hello,
I am trying to display several fields from different tables. Here are some of the fields that I need: The instructor needs to go after the social.
WESL | ENGR-1101-SW1 | Hinojosa | Ashley | Social | Instructor |
I am using a table where they have the social and I need to get both the student and the instructor. How do I select the instructor when the instructor's id is on a different table. example
CLASS PERSON CLASS_ASSIGN
student_id student_id: name facutly_id
Here is the code that I have so far and it works.
rem ----------------
rem Filename: cer.sql
rem Purpose: to get data from banner and put into flat file
rem Date: August 17, 2006 4:51 P.M.
rem Author: Robert Hernandez
rem ---------------
rem Notes: Need to add the Instructor - having problems
rem using the same spriden_id.
rem Also need to have admissions enter the grad date for
rem several students: Procedure is working as is.
declare
l_output utl_file.file_type;
grad_month varchar2(2);
buffer varchar2(1000);
cursor cursor1 is
select ssrmeet_bldg_code,
ssbsect_subj_code,
ssbsect_crse_numb,
ssbsect_seq_numb,
spriden_last_name,
spriden_first_name,
spriden_id,
scbcrse_title,
ssbsect_term_code,
sfrstcr_grde_code,
sorhsch_graduation_date,
decode(substr(sorhsch_graduation_date,4,3),'JAN','01',
'FEB','02',
'MAR','03',
'APR','04',
'MAY','05',
'JUN','06',
'JUL','07',
'AUG','08',
'SEP','09',
'OCT','10',
'NOV','11',
'DEC','12') as grad_month,
sorhsch_sbgi_code
from ssbsect,ssrmeet,sfrstcr,spriden,scbcrse,sorhsch
where rownum < 200
and ssbsect_seq_numb like 'S%'
and (ssrmeet_term_code = ssbsect_term_code
and ssrmeet_crn = ssbsect_crn)
and (ssbsect_crn = sfrstcr_crn
and sfrstcr_pidm = spriden_pidm
and length(spriden_id) = 9
and substr(spriden_id,1,1) <> 'A')
and (ssbsect_crse_numb = scbcrse_crse_numb
and ssbsect_subj_code = scbcrse_subj_code)
and spriden_pidm = sorhsch_pidm
and sorhsch_graduation_date is null
order by ssbsect_crse_numb;
begin
l_output := utl_file.fopen('CER','rbfpce.txt','W');
for cur1_rec in cursor1 loop
buffer:= cur1_rec.ssrmeet_bldg_code||'|'||
cur1_rec.ssbsect_subj_code||'-'||
cur1_rec.ssbsect_crse_numb||'-'||
cur1_rec.ssbsect_seq_numb||'|'||
cur1_rec.spriden_last_name||'|'||
cur1_rec.spriden_first_name||'|'||
substr(cur1_rec.spriden_id,1,3)||'-'||
substr(cur1_rec.spriden_id,4,2)||'-'||
substr(cur1_rec.spriden_id,6,4)||'|'||
cur1_rec.scbcrse_title||'|'||
cur1_rec.ssbsect_term_code||'|'||
cur1_rec.sfrstcr_grde_code||'|'||
'20'||SUBSTR(cur1_rec.sorhsch_graduation_date,8,2)||
cur1_rec.grad_month||'|'||
cur1_rec.sorhsch_sbgi_code;
utl_file.put_line(l_output,buffer,false);
end loop;
utl_file.fclose(l_output);
exception
when no_data_found then
utl_file.fclose(l_output);
end;
/

Can you be more precise , please :
- which table stores the people identities ? (I call this one Identity)
- which table gives the class where the student works in (I cal l this one Claa_attendees)
- which table gives the instructor of a class (I call this one Class)
If your issue is that you have one table which stores Itendities , and you need to display Student identity and Instructor Identity, you have to call this table twice in your query , using table aliases . I mean :
Select Stud_iden.name, Instr_iden.name
From Identity Stud_iden, Identity Instr_iden, Class_attendees, Class
Where Class.clas_id = class_attendees.class_id
and class.instructor_id = Instr_iden.people_id
and class_attendees.student_id = Stud_iden.people_id
Is this what you need to do ?

Drawing images gives 2 different results with the same code.

Im adding my code on here, and its sort of long but ill try to explain it. Most of it you can ignore.
Anyway i'm making a tree menu with only 1 level of expansion. So you have a TreeMenu object, and this object has some Branch classes. These Branch classes have Leaf classes. That is all. On the menu there is also a little box where you can click to expand and collapse each branch. if a branch is expanded, all of its leaves are shown. if it is collapsed only the branch name is shown.
So far what I've described above works, there is a small scale compilable working program, that is alright. Theres just a few bugs to fix.
A little feature of the tree is if a branch or a leaf is selected (has been clicked on in the past) it has a blue background. This sort of works. The branch names seem to work alright, and some of the leaves. However other if you run the example i provided you can click on Leaf 1, and it will be ok, but if you click on Leaf 2 then there blue background is twice as big as it should be. But for the rest, it works ok.
This is weird to me because the same code handles any of these same situations. So it seems that i get 2 diferent results with the same code. If anyone would like to help heres some stuff you should know:
You can ignore Leaf class, i dont think theres any errors in there.
You can ignore just about all of Branch class except the update() method.
You can ignore all of TreeMenu class except the inner MouseListener class might be useful.
You can ignore TreeTester. Just the JFrame tester class.
to run the code:
javac TreeMenu.java
java TreeMenu
http://cs.ucsb.edu/~jsterling/treemenu.zip
thanks.

You make a good point Stefan but unfortunately I already checked that. I have even copied the mapping (right click copy) and pasted it from the working Mapping to the bad Map (Paste) to make sure the context values were all the same.
I also opened all the queues and compared the values in each. All values match exactly except for the result(out) queue.
In both tests I am using the same IDOC XML file.
These are the only differences I see.
1. The IDOC is exactly the same as far as I can tell but they come from two different source SWCV. SAP APPL 4.7 and Steelcase_Procurement (ECC 6.0).
2. The working map uses a local UDF. The bad map calls the UDF from a Function Group. Is there a Java version difference between the two?
A better sample of the result queues look like this:
Correct Result:
Thickness of Glass: 20
Height: 10
Width: 5
Length: 18
Thickness of Glass: 10
Height: 15
Width: 8
Length: 14
Bad Result:
Thickness of Glass: 20
<null>
<null>
<null>
Width: 5
<null>
<null>
<null>
I took this chance to redesign my Variant Config output to separate the characteristics/values, but I'm still bothered that I was unable to determine what would cause the differing values.
Any ideas?
Thanks,
Matt

Why differences in the way different machines handle the same code??

OK, I've posted some other threads re some difficulties in getting the same code to function identically on, not only different platforms, but even on different machines running Windows!
Here's another, and I would really appreciate an explanation:
I have a tree control. Per the user's request, I made the right button function the same way it does on MS File Explorer: When they right click, the currently selected nodes are compared to the node they clicked over. If they clicked over a selected node, then the context menu for the nodes selected is displayed. If they clicked over a different node, then the selection is changed to the new node and the context menu displayed. If they right click over the tree control, but not a node in the tree, then the selection is cleared and no context menu is displayed.
Works great on my machine.
However, on some machines, no context menu is displayed, nor is the node selected... UNLESS THEY ALREADY HAVE A NODE SELECTED. I.e., if they have no nodes in the tree selected, they cannot display the context menu by right clicking on a node, nor does the selection change to the node they right click over. It only works if they already have something selected.
My app is distributed as an executable jar file and I am distributing the JRE with it, so there are no class path issues or differences in the JDK. Basically, my problem can be paraphrased as: Why doesnt' Swing behave the same way on different machines...? At least why not the same on the eame machine.
It's driving me nuts to think that I've resolved some UI glitch only to find out that, no, it's only fixed on some machines, not others.
Thanks.

Well, I normally develop on OSX and then deploy to Windows. But, this last build I have switched to Windows XP. The kinds of differences I am seeing are subtle: what triggers a repaint of the UI and now, it seems, what events are getting triggered by mouse clicks.
My deployment is an executable jar file, therefore it uses the manifest in the jar, not any classpath variables. I deploy an entire JRE along with the app, and the bat file that launches the app ensures that is the JAVA_HOME I'm using.
I can only guess that it's some underlying difference in versions of the platform and OS that causes this.
Here's the entire code for this latest issue re the popups:
        private void maybeShowPopup(NodeInfoTree tree, MouseEvent e) {
            if (e.isPopupTrigger()) {
                // They clicked the platform dependent popup trigger...
                int x = e.getX();
                int y = e.getY();
                TreePath[] selectedPaths = tree.getSelectionPaths();
                if (selectedPaths == null) {
                    selectedPaths = new TreePath[0];
                TreePath clickedPath = tree.getPathForLocation(x,y);
                if (clickedPath == null) {
                    // they right clicked, but not on a node, so clear the selection and return
                    tree.clearSelection();
                    return;
                } else {
                    // They clicked on a path, so let's see if it is a selected
                    // node. Search the selected array of paths, short circuiting
                    // out if it is found...
                    boolean foundInSelection = false;
                    for (int i=0; (!foundInSelection && (i < selectedPaths.length)); i++) {
                        foundInSelection = clickedPath.equals(selectedPaths);
if (!foundInSelection) {
// They right clicked elsewhere than the selection, so
// reset the selection to the new path...
tree.setSelectionPath(clickedPath);
final TreePath menuPath;
selectedPaths = tree.getSelectionPaths();
if (selectedPaths == null) {
return;
} else {
menuPath = selectedPaths[selectedPaths.length-1];
// Since they did click on a node, now we need to determine
// what popup menu should be displayed...
tree.scrollPathToVisible(menuPath);
NodeInfo ni = (NodeInfo) menuPath.getLastPathComponent();
// If the last path component is null, then they don't have
// anything selected, so we do nothing
if (ni == null) return;
// See if the Node is overriding our default popup menu...
com.harcourt.applications.tgen.browser.nodes.NodeMenu nodeMenu = ni.getMenu();
nodeMenu.activate(tree.getView(),ni);
JPopupMenu popup = (JPopupMenu) nodeMenu;
if (popup != null) {
popup.show(e.getComponent(),
e.getX(), e.getY());
The nodeMenu.activate call is just used to check whether or not certain menu options need to be enabled or disabled before displaying the menu. My theory right now is that, on some of these machines (all windows), a right click of the mouse is not generating a mouse event unless they have already something selected. I don't think it's a focus issue, because if they left click to select a node, and then ctrl-left click to de-select it, the right button then no longer generates a popup menu. They must select a node, then right click. Maybe there's no mouse event generated, or maybe this line is failing on some machines?:
TreePath clickedPath = tree.getPathForLocation(x,y);

To use the same code for many movieclips

Dear all.
I am using the flash to build my personal book online. I need zoom many movieclip, my images.
i make the code and function perfectly. But I want to find a way to use the same function for all movieclips and so, mantaining my code clean.
mc_01.addEventListener(MouseEvent.MIDDLE_MOUSE_DOWN, Drag);
mc_01.addEventListener(MouseEvent.MIDDLE_MOUSE_UP, unDrag);
mc_02.addEventListener(MouseEvent.MIDDLE_MOUSE_DOWN, Drag);
mc_02.addEventListener(MouseEvent.MIDDLE_MOUSE_UP, unDrag);
and many others....
function Zoom(e:MouseEvent):void
        mc_01.x = 0; //I try here for this.x but the previews movie, called "Books" is who have changed your x value.
        mc_01.y = 0;
I
EDIT: For untangle, the previews movie is called MyAllPhotos and then, contain all movieclips that are each movie clip is one my images

Hi Mr Kglad.
And when I call a property like a X position I use this["mc_"+padF(i)].x = 0; for substitute the mc_01.x = 0 ?
My problem realy is inside the function. Your loop add an event to my clips and direction to function Drag and UnDrag.
But inside in this functions, I need get some informations for the clip.
Here the code:
function Zoom(e:MouseEvent):void //Sorry, but the correct name my functions is Zoom and not Drag and unDrag
           var mod:Number = 50;
           mc_01.scaleX += e.delta / mod; //in this name mc what I need to use? this, parent? I try and not function.
           mc_01.scaleY += e.delta / mod;

Different apps on different devices using the same itunes account

I have two iPads for my kids and one iPhone all using the same iTunes account. I want to be able to have apps on my phone that the Ipads cannot see. can this be done by using multiple accounts on my iPhone?

Hi jacyjflorin,
Having multiple iTunes accounts can cause confusion.
Would Restrictions on the iPads work for you?
iOS: Understanding Restrictions (parental controls) - Apple Support
Check out the options you can set, including Installing Apps.
Thank you for visiting Apple Support Communities.
Nubz

Switching iMessaging to a different phone using the same Apple ID

I'm setting up my old iPhone as an iPod touch for my son. I am using the same Apple ID for both phones so we can share some content. But now the old phone is receiving all of my iMessages instead of my current phone. How can I switch that?

On yoru iPhone...
Settings > Messages - Send & receive at... and tick only yoru phone #, not your AppleID.

I have to have two apple TV to play different playlists using the same AV Receiver dual zone?

Hi folks.
I have a AV receiver dual zone and I'd like to play different playlists from my computer in each zone. To do that i have to have two Apple TV connected in this Receiver?
Thank you in advance.
cntg

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

How to update many tables using the same code

<%@ page language = "java" import = "java.sql.*" %>
<%@ page import = "java.sql.*" %>
<%@ page import = "java.text.*" %>
<%
String custname1=request.getParameter("custname");
session.setAttribute("custname",custname1);
String custtin1=request.getParameter("custtin");
session.setAttribute("custtin",custtin1);
%>
<%
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn;
conn=DriverManager.getConnection("jdbc:odbc:loginval");
Statement stat=conn.createStatement();
String stmt="insert into custdetails values('"+custname1+"','"+custtin1+"')";
stat.executeUpdate(stmt);
stat.close();
conn.close();
%>
<jsp:forward page = "success.html"/>
<%
catch(Exception e)
%>
<jsp:forward page = "tinerror.jsp"/>
<%
%>---------------------------------------------------------------
this is my code, now this code will be used by many users to update their corresponding tables. so my problem is based on the username i need to change the table name in the insert query, for example if the username is sai, then the table name has to be saicustdetails and if the user name is ram then the table name in the query has to be ramcustdetails. and so on.
please help

*<%@ page language = "java" import = "java.sql.*" %>
<%@ page import = "java.sql.*" %>
<%@ page import = "java.text.*" %>
<%
String tin1=request.getParameter("tin");
session.setAttribute("tin",tin1);
tin1=tin1+"custdetails";
String custname1=request.getParameter("custname");
session.setAttribute("custname",custname1);
String custtin1=request.getParameter("custtin");
session.setAttribute("custtin",custtin1);
//String tin2;
%>
<%
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn;
conn=DriverManager.getConnection("jdbc:odbc:loginval");
Statement stat=conn.createStatement();
String tin2;
tin2=tin1;
String stmt="insert into "+tin2+"values('"+custname1+"','"+custtin1+"')";
stat.executeUpdate(stmt);
stat.close();
conn.close();
%>
<jsp:forward page = "success.html"/>
<%
catch(Exception e)
%>
<jsp:forward page = "tinerror.jsp"/>
<%
%>i tried what u have said but still it does not work, anyother way?????

A suggestion for the mouse setting through persistence via SkyDrive/OneDrive: Add a check button to let the user tell if the mouse settings should be "restored" every time the user logs in a "different" computer using the same Microsoft Account.

Every time I log in one of my 2 computers with Microsoft Account, I have to change the main button (left/right) setting, because the settings persistence via SkyDrive/OneDrive.
I have different main mouse button settings in the computers.
Those settings shouldn't be changed, if the account is not a new one, after all, if the user has different settings in old accounts, it means there must be a reason to do it (because of hardware and/or furniture restriction).
Thus, a check button in the mouse settings' window that let the user tell if it should be changed or not would be welcomed.

Every time I log in one of my 2 computers with Microsoft Account, I have to change the main button (left/right) setting, because the settings persistence via SkyDrive/OneDrive.
I have different main mouse button settings in the computers.
Those settings shouldn't be changed, if the account is not a new one, after all, if the user has different settings in old accounts, it means there must be a reason to do it (because of hardware and/or furniture restriction).
Thus, a check button in the mouse settings' window that let the user tell if it should be changed or not would be welcomed.

Can iTunes from 2 different computer use the same library? (from wireless data storage device)

I purchased a wireless data storage device. My iTunes content will be moved there and I'm planning on moving my wife's iTunes data to the wireless device. Can both our iTunes share the same library?

One Apple ID can be shared for store purchases. On the iPhone go to Settings>Store and put in the ID. Then all the songs purchased with that ID can be downloaded from the iTunes store on the phone.
I hope that is what you were asking?

Different index used in same code segments

Similar Messages

Maybe you are looking for