Different / multiple senders to the same EOIO queue name.

Hello,
I'd like to know if it is possible to send from different senders, different messages to different receivers but using always same EOIO queue?
Scenarios are:
1) SOAP SENDER -> PI -> SOAP RECEIVER A
2) IDOC SENDER -> PI -> SOAP RECEIVER B
3) PROXY ABAP -> SOAP RECEIVER C.
All messages need to be processed by receivers in the same order they were sent from the different senders.
How this scenario should be implemented?
Thanks in advance.

Hi Michal. Thanks for response!
As far as I know,
1- Proxy Sender adds a prefix by defaul. Is it posible to change this behaviour?
2- By Following note 856597, I understand that you can set your own queue name in parameter &QueueId=xxxxxxxxxxxxxxxx. So there should be no problem.
3- In Idoc Adapter, you can set a queue name by using a Function Module, but I dont know whether this adds or not a prefix. Will it add a prefix to the queue name?
So, in case I want to use for all this adapters the same queue, then I need to set in the Soap queueId param, and in the Idoc function module, the same queue name that is generated automatically in Proxy Sender (since this is fixed queue name based on Prefix + custom queue suffix).
4- Is that true? Can I guarantee that from IDOC I can use same queue as used by Proxy and IDOC won't add a prefix?
Thanks again.

Similar Messages

Multiple locations with the same wi-fi name, can't connect

I am on a colleg campus that has multiple different locations for a wi-fi network that has the same name. Sometimes when I am on it in one spot and then switch to a different location my macbookpro will not acknowledge/see the network anymore. I can't connect to the internet now and I am extremely frustrated, does anyone know how to fix this?

Delete all Locations and use Automatic.
When you enter the password for each sub-node, OS X remmebers it, so if you travel it just connects to the next sub-node.
Locations is used for different networks with totally different setups, not just passwords.

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.
Can someone indicate the way to proceed?
Thanks.

Hi,
You can't use family sharing or multiple Apple IDs with iTunes match.
ITunes match is only attached to Apple id that you used to subscribe.
Jim

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Multiple consumers of the same Queue

In the past my use of JMS queues has been limited to a single message producer and a single consumer. I am now looking at having multiple copies of the same consumer running for load balancing and failover purposes, and this leads me to what I think is a basic question. BTW, we're running OpenMQ 4.4u1.
I have messages being produced and saved in a single queue.
I then have a consumer program whose logic is something like this:
1. Create session with no transaction and CLIENT_ACKNOWLEDGE.
2. Receive message from queue.
3. Do some processing with message. Repeat processing attempts multiple times, if needed, until successful.
4. Once processing is successful, acknowledge message.
Assume that I am running multiple copies of the consumer in separate JVMs (or on separate servers, for that matter).
Here are my related questions.
1. If step 3 takes a long time (e.g., several minutes) can I be sure that only one instance of the consumer will receive the message?
2. If a consumer is in step 3 and a catastrophic failure occurs (e.g., the JVM or server it is running on crashes) the message will never be acknowledged, but the session will not be shut down in an orderly fashion, either. Will the message that was received but never acknowledged eventually be delivered to another copy of the consumer?
3. If step three takes a very long time (hours or days, rather than minutes), will the broker misinterpret this as a failure of the consumer and deliver the same message to another one of the consumers?
Thank you for reading and/or responding to this question.
Bill

1. If step 3 takes a long time (e.g., several minutes) can I be sure that only one instance of the consumer will receive the message?A queue message will only be delivered and consumed by 1 consumer.
2. If a consumer is in step 3 and a catastrophic failure occurs (e.g., the JVM or server it is running on crashes) the message will never be acknowledged, but the session will not be shut down in an orderly fashion, either. Will the message that was received but never acknowledged eventually be delivered to another copy of the consumer?Yes.
3. If step three takes a very long time (hours or days, rather than minutes), will the broker misinterpret this as a failure of the consumer and deliver the same message to another one of the consumers?No, as long as the consumer's Session or Connection are intact

Managing multiple iOS devices on different Apple accounts from the same iMac

May be a very simple question to answer, but can I manage multiple iOS devices on different Apple accounts from the same iMac?
I ask as whilst I'm totally Mac'd, my partner who has her own Apple account has a Winows laptop and experiences problems updating iOS software on her iPhone 4S and iPad 3 Gen via the laptop. I'm thinking the problems may be overcome if we manage her iOS devices through my iMac.

Thanks dwb .... I thought there'd be a catch .... not to keen on all that media and apps on my iMac!
The specific problem is that whenever she updates to the latsest version of iOS using the latest iTunes for Windows on her PC laptop she seems to lose something in the process. One time she lost all her texts and the other day when updating to 5.1.1 she lost all her reminders. Not the end of the world but frustrating and shouldn't really happen and doesn't happen to me using the iMac and OSX.

Multiple windows of the same class with a different argument

Suppose I have a main window with a list of users. If I click on any one user, the "chat window" should open with the argument as that "user".
If i click on another, a similar "chat window" should open but with a different user.
I can't have so many stages because I don't know how many users are there.
How do I open multiple windows of the same class but with a different argument?

Here is a sample (opens, at random locations, a bunch of child windows parameterized by color).
Could be simpler, but hopefully you get the gist.
import java.util.Random;
import javafx.application.Application;
import javafx.geometry.Rectangle2D;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.layout.StackPane;
import javafx.stage.*;
public class ColoredStages extends Application {
final String[] colors = { "firebrick", "palegreen", "azure", "chocolate", "goldenrod" };
final Random random = new Random(42);
Rectangle2D screenBounds;
public static void main(String[] args) { launch(args); }
@Override public void start(Stage stage) {
    screenBounds = Screen.getPrimary().getVisualBounds();
    stage.setTitle("Primary");
    stage.setScene(new ColoredScene("cornsilk"));
    stage.show();
    for (String color : colors) {
      Stage coloredStage = new ColoredStage(stage, color);
      coloredStage.show();
class ColoredStage extends Stage {
    ColoredStage(Stage owner, String color) {
      super();
      initOwner(owner);
      initStyle(StageStyle.UTILITY);
      setX(screenBounds.getMinX() + random.nextInt((int) screenBounds.getWidth()));
      setY(screenBounds.getMinY() + random.nextInt((int) screenBounds.getHeight()));
      setScene(new ColoredScene(color));
class ColoredScene extends Scene {
    ColoredScene(String color) {
      super(new StackPane());
      StackPane layout = (StackPane) getRoot();
      layout.getChildren().addAll(new Label(color));
      layout.setStyle("-fx-font-size: 20px; -fx-padding: 30px; -fx-background-color: " + color);
}

Is it possible to have multiple different texts conversations with the same two people?

In iOS 8.1.3 is it possible to have multiple different text conversations with the same person? I'm looking for a way to set an old conversation aside to talk about something new.
Is this possible?

speculation is agaisnt the ToS here, but you never know (I was shocked when we got 8 track recording in GB2)
best thing to do is to send Apple some Feedback and let them know what features you want (they really do read what's sent):
http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
(Let the page FULLY load. The link to your answer is at the top of your screen)

TS2972 I have multiple libraries on the "same computer" with two different desktops, can't I share between two libraries on the same computer?

I'm trying to use home sharing to share content between libraries so some of the combined content in a given library, can be synced to an ipad. Instad of having mulitple computers, i have multiple libraries on the same computer using two desktops. How do I share within the same computer?

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

Multiple instances of the same VI running in parallel

Hi,
I have a timestamping subVI that looks at a counter channel and applies timestamps. I want to create multiple instances of this subVI (8 to be exact) and have them all run in parallel (looking at 8 different channels). Someone gave me the following advice:
>>
Also, in case you want to call multiple instances of the same SubVI, and you want these multiple instances to execute in parallel, you will have to set the SubVI to execute in reentrant mode. Do this by opening the SubVI and going to "Edit >> VI Properties >> Execution" and enable "Reentrant execution".
<<
I've tried this but only my second instance (I started simple with only 2 instances) seems to monitor its channel and pass data along to the queue. I've included my code below, I have two signal simulators which simulate singles coming in on channels 2 and 3. I'm using a PCQI 6602 counter/timer card.
Any help would be greatly appreciated, thanks in advance,
Chris
Attachments:
LabView App (June 28, 2005).zip ‏158 KB

good news! Your reentrant VI is working and all three instances are running (as execution highlighting clearly shows). The problem is going to be an error that is occuring but you don't see because you are ignoring the error clusters internally in the timer. It looks like at one point it was set to quit if an error occurred. That still needs to be there.
Always hookup error clusters...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I save multiple titles under the same DVD?

I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
Is there a way for me to do this, or am I chasing phantoms?

*This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
If you use versions like this often and wish to have only one master then you can do this with Aperture.
Regards
TD

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How do I sync multiple iPones on the same iMac

How do I sync multiple iPones on the same iMac

Use another account where? Let's say phone A is being synced to Mac A, and now you want to add phones B and C to Mac A, then they will all be syncing using the same account, the one used on Mac A. Phones B and C can share apps and songs currently on Mac A's iTunes, but they will lose any apps, etc. that were previously put on them from other macs that use different accounts. That's the way it works. If you want to keep the apps on B and C, then keep syncing them to their original macs.

Multiple users on the same ODI installation?

Hi all
is it possible to have multiple users working with the same odi installation? We have a virtualized IT infrastructure (citrix and wmware) where we can have multiple users on the same virtual instance. From our point of view, there is no licencing issue since we have a package covering literally everything.
One of the issues are the config files stored in the installation directory of odi (../bin). Is there a way to tell odi to store them in a different location, eg. the user home?
Thanks a lot
Benno

ODI looks in the current working directory for the configuration files, mostly you would have issues with the snps_login_work.xml and snps_login_security.xml files, but these may be common across all users. (just don't store the username/passwords for the ODI users in them).
The way ODI works, most of what are creating is stored in the repository anyway, it is only local GUI config stuff that may be stored locally.
Short answer, yes, you can, but might need to modify the config files a little to make it work.

Different / multiple senders to the same EOIO queue name.

Similar Messages

Maybe you are looking for