Digital Raising Edge using cfp-300

Hi,
Raising Pulse / Positive Pulse and Falling Pulse/ Negative Pulse.
I put this dummy question different time in different ways but still there is no answer.
I am using cFP-300 (Digital input module). As in other PLC programming softwares there are options that they have Pulse option, whenever there is activity (acquisition) of data from field device, they can generate a Positive Rising Pulse if input goes High (1) and Negative Pulse, if input goes Low (0).
It is necessary for my projects as i have to activate my output based on the pulse i receive from field, my actions are on pulse monitoring not on continuous monitoring.
But i do't know how i can get this Rising or Falling Pulse from my cFP-300.
Hopefully i explained in detail.

M_Atif,
You can use a shift register and boolean logic to monitor changes in the digital input. This will allow you to execute code whenever a rising or falling edge is seen. I made up a quick example which shows this type of functionality:
Message Edited by Devin_K on 11-28-2007 02:24 PM
Devin K
Systems Engineering - RTT & HIL
Attachments:
risingfalling1.JPG ‏46 KB

Similar Messages

Want labview to start plotting on first raising edge, and stop plotting 0.5 sec later

I'm new to labview and I'm using ni-pci 6533 card.
The attached labview file simply inputs digital signals from a TV and displays in a waveform graph as 1's and 0's. How can I make the program to start plotting on the first raising edge and stop 0.5 sec after that?
Thanks.
Attachments:
oscilloscope.vi ‏71 KB

I tried what debonair said but it does not start plotting even when with signal presence, probably because I wired wrong. Can anyone help me with this?
Forgot to mention earlier, I took the attached file from NI website, and I dont really understand some part of it. Currently, the file functions like an oscilloscope, so I need trigger to capture 0.5sec long signal precisely.
Thank you

No digital video output from XVR-300 in Ultra-45

I am switching from solaris 10/x86 to sparc. I have a new Ultra-45 with XVR-300 graphics adapter. It's running Solaris 10u4. The system was ordered as a standard configuration from the catalog.
The XVR-300 graphics adapter currently produces no digital output. My Sun A1240P0 24" monitor reports no signal on the DVI input. That is, there is no digital output at power on (boot ROM), during Solaris boot (terminal), nor after Solaris finishes booting (X).
The graphics adaptor uses a connector with two video outputs, and comes with a splitter cable with two DVI output connectors. I get no video output on either. The DVI cable I am using is the one that works when connected to the graphics adaptor on the old system.
I added a VGA adapter plug to connector 1 of the splitter cable, and was able to get an analog signal to drive the display via the VGA input connector.
The manuals for the Ultra-45 and for the XVR-300 make no mention of analog vs digital output. They both just say to connect the adapter to the monitor.
Since I can get analog output from the SVR-300, the card is basically working. The DVI cable and the monitor's DVI input work with another system. The only variables are the digital output from the XVR-300 and the splitter cable. (The splitter cable's analog signals work.)
How can I activate digital output and make it the default?

try this page........
http://docs.sun.com/source/819-6651-13/chap2.install.html#50589705_pgfId-1001195
To Set the Sun XVR-300 Graphics Accelerator as the Default Monitor Console Display
1. At the ok prompt, type:
ok show-displays
The following shows how to set the console device:
a) /pci@1f,700000/SUNW,XVR-300@0
b) /pci@1e,600000/pci@0/pci@8/SUNW,XVR-300@0
q) NO SELECTION
Enter Selection, q to quit:
2. Select the graphics accelerator you want to be the default console display.
In this example, you would select b for the Sun XVR-300 graphics accelerator.
Enter Selection, q to quit: b
/pci@1e,600000/pci@0/pci@8/SUNW,XVR-300@0 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@1e,600000/SUNW,XVR-300@5
3. Create an alias name for the Sun XVR-300 graphics accelerator device.
This example shows mydev as the alias device name.
ok nvalias mydev
Press Control-Y, then Return.
4. Set the device you selected to be the console device.
ok setenv output-device mydev
5. Store the alias name that you have created.
ok setenv use-nvramrc? true
6. Reset the output-device environment:
ok reset-all
7. Connect your monitor cable to the Sun XVR-300 graphics accelerator on your system back panel.
Man Pages
The Sun XVR-300 graphics accelerator man pages describe how you can query and set frame buffer attributes such as screen resolutions and visual configurations.
Use the fbconfig(1M) man page for configuring all Sun graphics accelerators.
SUNWnfb_config(1M) contains Sun XVR-300 device-specific configuration information. To get a list of all graphics devices on your system, type:
host% fbconfig -list
This example shows a list of graphics devices displayed:
Device-Filename Specific Config Program
/dev/fbs/nfb0 SUNWnfb_config
procedure icon To Display Man Pages
single-step bulletUse the fbconfig -help option to display the attributes and parameters information of the man page.
host% fbconfig -dev nfb0 -help
single-step bulletTo access the fbconfig man page, type:
host% man fbconfig
single-step bulletTo access the Sun XVR-300 graphics accelerator man page, type:
host% man SUNWnfb_config
haroldkarl

I just downloaded Digital Editions to use an e-book I purchased. When I try to open the file it opens in Adobe Reader and I get an error message. Please help

please help I downloaded Digital Editions to use e-book and when I got to open I get an error message

It says file could not be opened because it was either not a supported type or it was damaged. I have already had the file resent and in talking to the American Medical Association (purchased from their site) it appears when I go to open the file it is in Adobe Reader and I do not see an option to move it to Adobe Digital Editions,
Kathy Harlan
<mailto:[email protected]> [email protected]
Cell: 214-850-6427

How do I create a digital signature to use when filling out applications online?

The application is asking me to add or create a digital ID to sign and encrypt documents. The certificate that comes with your digital ID is sent to others so that they can verify your signature.
I have four options: Browse for an existing digital ID file
Configure a roaming ID for use on this computer
Create a self-signed digital ID for use with Acrobat
Look for newly inserted hardware tokens

Formscentral does not support forms with digital signature workflows. I suggest you see if our Echosign product meets your needs.

HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

How can a digital copy be used in a household with multiple apple ids, synced on the same computer? I want to put a digital copy on my device, and on my wife's device.
Please help.

you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

Digital signatures for use in consenting research participants

Hi. I need some help implementing digital signatures into a consent document. I work as a research assistant at a university and in our line of research, we have participants from multiple regions of the country. One of the most important parts of staying in compliance with various regulations is that all research participants are presented with information about the study, and they must sign a document to indicate that they understand the risks/benefits involved.
We want to implement digital signatures to make this process easier for ourselves and the research participants who live across the country. However, there seem to be some technical hurdles in using signatures. First, we want to make sure that participants who only have Adobe Reader are also able to sign (my understanding is that they should be able to). Some participants may not be very computer savvy, so we need the process to be somewhat dummy-proof. Participants must fill in their printed name and date, so I need for them to have authority to change some information, but I don't want them to have the authority to change the document itself or the participant ID numbers which I have to fill in once I get the form back.
I have created a fillable form in Adobe LiveCycle and added 2 signature form fields, one for the participant, and one for myself. I plan on distributing the form so that I can have a dataset file for all of the returned consents.
Essentially the process should work like this:
I send a participant the form, they fill out the fields for their printed name, date, and provide their digital signature and use the submit by email button to return the form to me.
I receive the form, add their participant ID number, and provide my digital signature.
Save the file in our dataset file which is associated with the returned consent forms.
The thing I'm concerned about is their digital signature being invalidated once I insert the ID numbers and add my own digital signature.
Thanks for any help you could provide.

We have a document that needs to be signed by more than one individual -- and in our process we are using the Topacz signature pad to get the signature. It's similar to the one you sign at the grocery store, drug store, etc. In order to NOT have the first signature invalidated, we were told to edit the registry...and it works perfectly!
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\8.0\AVAlert\cCheckbox]
"iDigSigSaveAsCertified"=dword:00000001
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\8.0\AVAlert\cCheckbox\cAnnots]
"iReaderEnableSaveWarn"=dword:00000001
Obviously if you are using a different version of Acrobat, you'll have to change the key accordingly.
Hopefully this will work with your process.
Good luck!!

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.

How to use cfp ctr 502 for rpm measure+cfp configure in labview

i'm new in handling cFP's,i need to measure rpm of an engine using cFP CTR 502.Plz i need detail regarding which method either pulse counting or frequency method is required for my application,Plz also tell me is there any possibility of configuring cfp using labview

Hi,
please see the following link to NI-Discusion forum. There is simaler question.
http://forums.ni.com/ni/board/message?board.id=110&message.id=1764&requireLogin=False
I also send you tow links to LabVIEW examples. I hope it helps.
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=BCB1261CBE2635D2E034080020E74861&p_node=174404&p_rank=&p_source=Internal&p_submitted=N
http://venus.ni.com/stage/we/niepd_web_display.display_epd4?p_guid=BCB1261CBE2635D2E034080020E74861&p_node=
TN

HT1539 the digital copy disc uses a power pc application that is no longer supported by mac os x, what can I do to obtain my digital copy?

the digital copy disc uses a power pc application that is no longer supported by mac os x, what can I do to obtain my digital copy?

If the OP is asking a generic question about how to run a CD-ROM, DVD or other disc that had an executable program that was a PowerPC application, he would either have to:
1. Install Snow Leopard (with Rosetta) into a partition on his hard drive or an an external hard drive, for "dual-booting" if his Mac will still boot into SL; or
2. Install Snow Leopard (with Rosetta) into Parallels to run his disc in Mt. Lion:
[click on image to enlarge]
<Edited By Host>

I have the Photoshop CS6 Extended CD, but my computer won't read it. Is it possible to get a digital download to use instead?

I have the Photoshop CS6 Extended CD, but my computer won't read it. Is it possible to get a digital download to use instead?

You're welcome. Run those updates, they are important.
Gene

Kernel_task is using over 300% of CPU

Hi,
Kernel_task is using over 300% CPU and my Macbook Pro is running really slowly as a result. I have reset SMC and PRAM, done an Apple hardware test, Cleaned with onyX, hoovered the fans and restored with time machine, all to no avail. Can anyone please help or suggest anything I can try?
Thanks

Hi,
Kernel_task is using over 300% CPU and my Macbook Pro is running really slowly as a result. I have reset SMC and PRAM, done an Apple hardware test, Cleaned with onyX, hoovered the fans and restored with time machine, all to no avail. Can anyone please help or suggest anything I can try?
Thanks

IMovie using 200-300% CPU when editing video. Why?

Hello everyone,
As the title says, I am experiencing iMovie using 200-300% of my Macbook Air's CPU. This occurs when I am editing the video, taking parts out and making sure everything look and sounds good.
Does anyone know of a way to stop iMovie from using this much CPU?
Any help will be appreciated,
Thank you.

having the same problem. tried deleting the preferences and now i can't even insert cutaways - all options disappeared from the pop-up menu, only leaving the option to replace or insert

Digital DJ mixes using Itunes library

Hi,
I hope someone out there can help me decide whether Garageband is the right option. I am looking for a program to make digital DJ mixes using my iTunes library. I used Pro Tools many years ago for years, so I am not new to hard disk recording. I just want to import, maybe 10 or 15 songs, and mix them over 2 or 3 tracks. Then track them so each song will track on a cd player but still continuously
play track to track (I forgot what this is called, its been a while.) Just like a DJ mix. Pitching each track is very important. Does Garageband offer Time Stretch/Compression? I want to digitally beat-match each song to mix in/out. I'm also running an older ibook (see below). Should i look for an older version of iLife? Does it sound like Garageband can do these functions painlessly? Are the any other programs out there more suitable?
Any information on this subject is greatly appreciated.

I've been using GarageBand to digitize vinyl- It's great for that (with my Motu 896)
I've been messing with an M-audio DJ mixing interface, and Torq Mixlab's "light" version. It works with Core Audio- feeds off your iTunes stash automatically, and records the mix too. To be able to use headphones in the DJ way if you don't have a multichannel interface an iMic works well.
There's other software I've been experimenting with- because the computer I use for our music server is kinda slow. Here's some title's you'll like tasting:
DJay: (49$ and worth it!!!) http://www.algoriddim.net/
Mixxx (free!) http://www.mixxx.org/
Audiophile (free!) http://homepage.mac.com/a_logan/PWS/
DrDJ (free) http://www.lievendekeyser.net/
Hope that info helps your quest. My goal is to make my M-audio midimixer wirelessly feed off my iTunes library- and stream the mix to different audio zones around the house via a couple airport expresses. I'm almost there! Yippie!

Sharp Edge using the Ellipse Tool?

I am using Fireworks 8 and trying to create an atom image but when I create the proton paths using the ellipse tool the edges show up as jagged instead of sharp after flattening the image and uploading as jpg, png or gif files to the server. I've tried several techniques mentioned in this forum such as feathering the edge, blurring the edge and increasing the resolution. None of them has worked for me. Can anyone shed some light as to why the ellipse tool will not create a sharp edge? Is there another way of creating this image using another tool?

Okay after some more trial and error I got what I wanted by increasing the resolution to 300 and using the following:
to achieve this:

Digital Raising Edge using cfp-300

Similar Messages

Maybe you are looking for