Digital Signatures and date fields

I have a form with digital signatures.  I understand that the digital signatures have a date on them but until we are fully electronic with the form some users may still print sign and date.  With that said we will have a date field next to the signatures.  Is there anyway to default the date field to whatever date the form was signed - to tie them together some way?  If not is there anyway to make the date field not be less than today's date?  That it can't be post dated?  Thanks!
Jodi

Check the Digital Signature status, if it is in signed state populate the date field with date.
But problem is it will show the current system date, may be user can change their pc/laptop dates.
Please check the attached sample. Script written on change event of Digital Signature field.
RAGHU.

Similar Messages

  • Create Multiple Signature and Date fields with a custom Toolbar Button

    First off, thanks in advance!  I am a scripting newbie and I am trudging my way through with very little experience with scripting of any kind.  I am good at taking other's scripts and forming them into something I need, but I can't seem to find anything to do what I want.
    Using Adobe Acrobat X, I am trying to create a toolbar button that I can press to create multiple signature and date fields with predetermined locations.
    Below is the script I have that is working to create just a single signature box, but I can't seem to figure out the exact syntax to have that same button create multiple fields.  In total it is 9 signature fields and 9 date fields need to be created.  If you can just give me an example of what the button would look like with multiple scripts?  I was assuming I would set up multiple variables and then in the cExec property of the toolbar button I could just call out all of those variables? 
    var sigswm = "addField('sigSWM', 'signature', '0', [108, 198, 494.64, 72])"
    app.addToolButton({cName: "dotbutton", cExec: sigswm, cLabel: "Place Signature and Date Blocks",});
    Thanks in advance for any help you can provide.
    Billy Sweeney

    Thanks!  That was probably the only thing I didn't try.
    I do have one more question.  What I want is when the signature field is clicked it fills out a specific date field. I beleive the script I want would be:
    var currentTime = new Date()
        var month = currentTime.getMonth() + 1
        var day = currentTime.getDate()
        var year = currentTime.getFullYear()
        var signingTime = day +"/"+month+"/"+year
        var f = this.getField("dateSWM"); 
        f.value = signingTime;
    I found this on another thread that mentioned it could be placed in the Signed tab of the signature properties dialog.  I am assuming it would be placed in my button script file as a setAction script for each signature, but I am not real sure exactly where or how?

  • Digital signature and input fields issue

    Hello,
    I guess that I found some kind of BUG in forms. If you have a form with two text input fields, one as ID ot the field which is computed, read only (user can not change it) and regular value input text field, and digital signature field at the bottom.
    Once you sign the form, you can select on the signature field, what gets locked after signing. If I choose both text fields, they look like a label on the PDF after signing.
    What concerns me is once you remove the digital signature, the ID text field becomes edditable by the user, which is a bug in my opinion.
    Thanks for any suggestions.
    J

    I tried this and could not duplicate the behaviour that you reported.
    I created a form with two fields and a signature field.  The first field I set to "Calculated - Read Only", with the following script on the "Initialize" event,
    this.rawValue = "1234";
    I created a field collection that included the calculated field and associated it with the signature field. I opened the form, the calculated value appears and is read-only, I filled in the second field and signed the PDF. (Both fields were locked).  I cleared the signature field and the original Read Only calculated field remained locked, while the second field was editable again.
    I used Designer ES version 8.2.1
    Regards
    Steve

  • Digital Signatures and APEX

    Has anyone had any success implimenting digital signatures (PKI) within APEX?
    Here is a brief synapsis of what we are looking to accomplish and realize that third-party hardware/software might be necessary. We require users to login using LDAP credentials. We want them to be able to generate documents (i.e. PDF, Word, or Excel) from our application data. We want the users to have the ability to Digitally Sign their documents. We will be issuing individual private keys & certificates and we are considering generating the documents as XML. We are still in requirements gathering, but wanted to explore any and all capabilities within APEX.
    Any thoughts? Thanks.

    Hello Francesco,
    I want to  generate a digital signature (PKCS#7,XML) using SAP SSF API as explained in
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/65c3b32107964996a56e4165077e24/content.htm and in Amol Joshi's reply in
    Digital Signatures and Document Encryption api
    so my question  is From which PI/XI version and its SPS this SAP SSF LIBRARY is supported ?
    Kind Regards,
    Kubra fatima.

  • Digital Signature and SharePoint 2013

    Dear Expert,
    My company has a plan to do digital signature and sharepoint 2013. Now, we focus for internal use that I know use AD CS. and in near future we use for external use. We plan to buy 3rd party certificate.
    My question
    1. How to implement this solution? Please suggest
    2. If I implemented AD CS, can we use public certificate in near future.
    3. Can we use public certificate with SharePoint 2013?
    Thank you

    Hi,
    Based on your description, my understanding is that you want to use Digital Signature in SharePoint Server 2013.
    You can use digital signatures in forms ,then use these forms in you SharePoint site.
    In InfoPath form ,you can change the form to allow signature here: File>Info>Advanced form options >Digital Signatures .You can choose to sign the whole form or a field .
    https://social.technet.microsoft.com/Forums/en-US/0ed54d57-d67d-41cd-bd1b-9e5a4be10d0c/use-of-digital-signature-in-sharepoint-2010?forum=sharepointcustomizationprevious
    besides, here is a similar post, you can take a look at:
    http://sharepoint.stackexchange.com/questions/78058/custom-digital-signatures-or-hash-on-list-items
    For more information about implemented AD CS, refer to the following link:
    http://technet.microsoft.com/en-us/library/hh831574.aspx
    Best Regards,
    Lisa Chen    
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]                                                   
    Lisa Chen
    TechNet Community Support

  • Digital Signatures and Encryption in Yosemite Mail

    After upgrading to Yosemite, I am having difficulty using the Mac Mail app to send digitally signed and encrypted email.
    Before the upgrade to Yosemite, I was able to send signed and encrypted emails using certificate/keys in my keychain using both the Mac Mail app and Microsoft Outlook 2011 for Mac.
    After upgrading, I am still able to send signed and encrypted message in Outlook, but the Mac Mail app gives the following error when I attempt to send a signed email:
    'You don’t have a trusted certificate in your keychain that matches the email address “XXXX@XXXX”. Without a certificate, you can’t sign messages sent from this address.'   (Actual name replaced)
    When I look at my certificates in my keychain, a certificate is available with "Usage: Digital Signature" that has the email address from the error message "XXXX@XXXX" with exact case in the RFC 822 Name.
    Another interesting piece of data that might help track this down is that when I first launch the Mac Mail application, the Mac Mail application is able to successfully decrypt emails that have been previously sent encrypted to me.  HOWEVER, after I attempt to send an email and get the "You don’t have a trusted certificate..." error message, these emails are no longer able to be decrypted.  I get the "Unable to decrypt message" header above the message and the content of the message is just a "smime.p7m".  If I close the mail application and restart it, these encrypted message are once again decrypt-able until I attempt to send a message.
    It almost seems like things are working until mail tries to access the keychain.
    I have attempted to delete my certificate and keys from my keychain and then adding those items again.
    I have attempted to close the mail application and reopen it.
    I have attempted to reboot my computer.

    1.  I want to confirm that this is still an issue for me in 10.10.1 and mail Version 8.1 (1993)
    2.  I have another data point.
    At my office I have wired networking and wireless networking available.  Primarily I utilize the wired networking for access to network drives, etc.
    When using the wired networking, I experience all the problems that have been catalogued in this thread.  Can't sign, can't encrypt, can't close the compose window after the mail program fails to find my certificate.
    However, when I switch to wireless networking before starting the mail application, digital signatures and encryption seem to work!  This is pretty weird behavior.  Make sure to restart mail if you were previously wired.
    Here are some theories:
    Something to do with OCSP?  When I am wired vs wireless I am on different ip subnets and subject to different firewall rule sets.  Perhaps OCSP is trying to determine the status of the certificate and failing? 
    Here are some things I have tested:
    I switched to a different official apple brand thunderbolt to ethernet adapter with no change in behavior
    I disabled wireless and disconnected my wired network.  So no network access at all.  Signatures and encryption work!  The message obviously does not send, but it appears in my outbox and I don't get the signature error.  When I reconnect my wired cable, the message sends successfully and appears as encrypted in my sent folder!
    I have attempted to disable OCSP by using "Keychain Access --> Preferences --> Certificates Tab --> OCSP (OFF) and CRL (OFF)" but this hasn't made a difference in the behavior of wired networking.
    Ran a TCPDUMP on traffic to the OCSP service but didn't see any traffic when I attempted to send a message and received the signature error
    I am pretty stumped on this.  This is very odd behavior
    Does anyone else experience this behavior?

  • Digital Signatures and Coldfusion

    I want to add a digital signature field (3 to be exact) to a PDF file that I
    generate via coldfusion (via the cfdocument tag), OR use a form built in livecycle that once it is signed by the first person, the only allowable changes to the form are the second and third digital signature.
    Any help would be appreciated as digital signatures are not handled in cfdocument as well (at all) as I had hoped.
    Thanks,
    Drew

    Hello Francesco,
    I want to  generate a digital signature (PKCS#7,XML) using SAP SSF API as explained in
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/65c3b32107964996a56e4165077e24/content.htm and in Amol Joshi's reply in
    Digital Signatures and Document Encryption api
    so my question  is From which PI/XI version and its SPS this SAP SSF LIBRARY is supported ?
    Kind Regards,
    Kubra fatima.

  • How to use Digital Signature and PKI in SharePoint Server 2013

    Dear Expert,
    My company will plan to use Digital Signature and PKI document in SharEPoint Server 2013.
    Can you guide me what's the concept and how to implement and develop?
    Please suggestion.
    BR,

    Hi BR,
    Based on your description, my understanding is that you want to use Digital Signature and PKI in SharePoint Server 2013.
    You can use digital signatures in forms ,then use these forms in you SharePoint site.
    In InfoPath form ,you can change the form to allow signature here: File>Info>Advanced form options >Digital Signatures .You can choose to sign the whole form or a field .
    https://social.technet.microsoft.com/Forums/en-US/0ed54d57-d67d-41cd-bd1b-9e5a4be10d0c/use-of-digital-signature-in-sharepoint-2010?forum=sharepointcustomizationprevious
    Or you can use any tools such as the ADSS Connector for SharePoint which allows enterprise users to "click and sign" on a document in SharePoint.
    http://www.ascertia.com/
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Message level security: difference digital signature and certificate

    Hi everybody,
    could anybody please explain the difference between <b>digital signature</b> and <b>certificate</b>?
    Thans
    Regards Mario

    Mario,
    A digital signature is an electronic signature that can be used to authenticate the identity of the sender of a message or the signer of a document, and possibly to ensure that the original content of the message or document that has been sent is unchanged. Digital signatures are easily transportable, cannot be imitated by someone else, and can be automatically time-stamped. The ability to ensure that the original signed message arrived means that the sender cannot easily repudiate it later.
    A digital signature can be used with any kind of message, whether it is encrypted or not, simply so that the receiver can be sure of the sender's identity and that the message arrived intact. A digital certificate contains the digital signature of the certificate-issuing authority so that anyone can verify that the certificate is real.
    where as
    A digital certificate is an electronic "credit card" that establishes your credentials when doing business or other transactions on the Web. It is issued by a certification authority (CA). It contains your name, a serial number, expiration dates, a copy of the certificate holder's public key (used for encrypting messages and digital signatures), and the digital signature of the certificate-issuing authority so that a recipient can verify that the certificate is real. Some digital certificates conform to a standard, X.509. Digital certificates can be kept in registries so that authenticating users can look up other users' public keys.
    hope it helps u.
    --Archana

  • Configure the stamp ,Digital signature and water mark in DMS

    Hi...
    I want to configure the stamp ,Digital signature and water mark in for my client in DMS.
    Stamp:detaiils showing doc type, doc status,who has open, doc no,version,date and time
    Digital Sign:with respect to approval (system should ask user name and password while approvig)
    Water mark:for the status (Draft/approved)
    Can anybody guide me to do this?Please explan in details as i am doing it first time.
    In addition to do this what addition system requirement is needed?
    Regards,
    Sandip

    Hi Sandip,
    Please refer below links for required details
    For Redlining   Redlining
    Watermark      DMS Seal system watermarking solution
    Hope this will answer your query.
    Regards,
    Deepak Kori

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • Infoset Join condition on Key feilds and data fields

    Hi Guys,
    I have a requirement to biuld the Info set with join conditon on two DSO's  the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
    The two info objects are                
                           0AC_DOC_NO
                           0ITEM_NUM
    These two info objects are defined as  data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                            key fields in DSO:    0FIAP_0o3 FI AP Line Item
    Please suggest me is it possible to define join the condtion on the data fields and key feilds.
    Thanks
    Best regards
    SG

    Hi
    yes you can create join, you will get any issue in reporting level.
    example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
    In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
    Creation of join is dependent on fields common in your source objects.
    check out the below document
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh
    Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

  • Key fields and data fields in a DSO  ??

    i have a question regarding key fields and data fields in a Standard DSO...
    i am using 2 datasources to build a open sales report 2LIS_11_VASTH  and  2LIS_11_VASTI   i am pulling in data from these 2 data sources to a DSO and i am wondering what infoobjects should be in the key fields and data fields .....does this reflect back to table VBUK and VBUP tables and does the key field in the DSO have to be the key fields in VBUK and VBUP tables  ????  or what really should be included as key fields and data fields   ????  
    please help....

    If you look at the various SD tables, VBELN and POSNR are commonly used as the document number and document line item.
    For VBAP and VBUP, it's referring to the Sales Order Line Item with the columns VBELN and POSNR as the key for both tables. However, if you look at the LIPS table, which is the Delivery Line Item table, it too has VBELN and POSNR as the key. Likewise, the VTTP table, which is the Shipment Line Item table, also has VBELN and POSNR as the key.
    While using RSOSFIELDMAP as a map is a fairly good "rule of thumb", it still needs to be used with a level of skepticism.

  • Prerequsites for deciding Key fields and data fields

    Hi
    I would like to know the criteria to decide upon KEY fields and Data fields for an infoprovider.

    Hi,
    What is a Key field in a Database and How should I choose one?
    Keys are crucial to a table structure for many reasons, some of which are identified below:
    They ensure that each record in a table is precisely identified.
    They help establish and enforce various types of integrity.
    They serve to establish table relationships.
    Datafields may be Charecteristics and it may be keyfigures
    Regards,
    Marasa.

  • Key Fields and Data Fields in ODS

    Hi Guru's ,
    Can u Explain what are Key Field's and Data Field's in ODS,and How they work.
    Thanx in Advance.

    Hi Pradeep,
    An ODS’ key fields forms a unique combination of chars according to which data in the ODS will be summed up. Data fields are additional fields, chars or key figures.
    For example, you have the following key fields:
    Doc No, Doc line item (item no in the doc) and you load the following data:
    Doc# Item# Amount CALDAY
    1234  1        100       26.09.2005
    1234  1        150       27.09.2005
    1234   2        300      27.09.2005
    1235   1        400      27.09.2005
    The first two rows with the same key fields (1234-1) will be aggregated and into ODS will go amount of 250.
    What I said is true if for Amount key figure the ‘Add’ option is set.
    But if you set an ‘Overwrite’ option, then the second record will overwrite the first one and only amount of 150 will go to ODS!
    But if CALDAY is also a key field, then into ODS will go all records without any aggregation, because key fields combination is different for all records.
    So, ODS’ key fields choice and KFs settings are very important for data aggregation in the ODS.
    Best regards,
    Eugene

Maybe you are looking for