Disable auto exit/quit on Firefox Mobile

I understand the change as the default behavior of Android apps, but I frequently check Firefox after the tabs/browser had automatically quit itself. I add tabs because even when browser is left opened, opening each of the tabs would reload them.
However such behavior is not good for the health of my data plan. (I am using the "unlimited" plan, but the data-based FUP is horrible) As such, I would like to prevent silently killing the tabs, only to be refreshed. I don't mind if Firefox is killed entirely, as long as the pages are intact and not reloaded.
Thanks in advance.

Firefox older than 20th version sure had no problem with getting killed. Firefox following the Android convention of getting killed when not used was added with version 20, as mentioned in the release notes.
As such, I am hoping the devs left some about:config option to toggle it.

Similar Messages

  • How to disable automatic spell checking on Firefox Mobile?

    Hello,
    I installed Firefox onto my N900, and its spell checking functionality annoys me very much. I usually type in a language that it doesn't support, and even in English it sometimes underlines words which it doesn't have in its dictionary.
    I know all I have to do is set "layout.spellcheckDefault" to 0 in about:config, but I can't do that... double clicking the setting name just zooms in and out, and there is no way to disable it (or I haven't found it) from the Settings UI.
    Finally, I did it by manually editing the following file:
    /home/opt/mozilla/fennec-1.0.0/defaults/preferences/mobile.js
    However, in my opinion, a simple solution should be presented for more casual users.
    == Extensions installed: ==
    Weave
    Adblock Plus

    Caitlin,
    Thanks for your answer! Since then, I figured out that I could change those settings in about:config by selecting them and pressing enter.
    By the way I installed the nightly Fennec build, and it seems more responsive than the Firefox-named release version. It doesn't support the Adblock plugin, so that may be reason enough to switch back to the 1.0 version.

  • How to disable auto reload Tabs on Firefox-Launch

    Hi,
    i have an old Laptop and it takes a lot of time to launch Firefox if there are a lot of tabs from the old session.
    How can i prevent Firefox to reload all the old Tabs on startup?
    Thanks for your help
    Florian

    Without using any add-ons, there is a really simple solution I discovered last night. In the General tab of the Options menu, select the "When Firefox starts" option "Show my windows and tabs from last time", then tick the "Don't load tabs until selected" box below. you can then set the "WFS" option to homepage or blank tab, and if you save a session, the tabs will no longer automatically refresh when you re-open FF

  • I have to open Task Manager to quit the Firefox process almost every time b4 it will shut down I just uninstalled & downloaded another copy/version & will reinstall again. Thought you would want to know. I am anjulz on comcast

    I have to open Task Manager & quit the Firefox process manually b4 it will stop. When I did it the last time b4 I just uninstalled my memory usage was up to like over 300,000 with only 1 tab open. Just downloaded another copy/version & will reinstall. Hopefully this will stop the problem. thought you would want to know this.

    The proper way to close Firefox is through the File menu "Exit" or the equivalent with the Firefox button.
    More detail in item '''#38 Firefox already running '''
    of
    [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6) (#fx4interface)]
    Firefox already running, to properly shutdown Firefox when closing the last window use File → Exit/Quit (or Firefox button → Exit). Closing Firefox with the [X] in the upper right corner closes the window ("Ctrl+W") but that does not necessarily close Firefox if it has subtasks running. If you want to close and reopen Firefox use the "Restart" within Add-ons if you made a change requiring a restart, or install "[https://addons.mozilla.org/firefox/addon/restartless-restart/ Restartless Restart]" ("Ctrl+Alt+R") which will allow you to take Firefox down and restart without having to check the Windows Task Manager to see if Firefox first actually ended. [http://kb.mozillazine.org/Firefox_hangs Firefox hangs]

  • How do I disable OCSP in Firefox Mobile?

    At my university, they recently started using securelogin.arubanetworks.com as a portal, and it seems that all versions of Firefox don't like it. Disabling OCSP supposedly solves the problem, but there is not option to do so on Firefox Mobile that I can see.

    I am aware, however, it seems there are no advanced setting in Firefox Mobile.

  • Get firefox mobile password manager auto fill login to sites?

    Is there a way i can get my firefox mobile password manager to auto matically fill or login to my sites?

    The master password will not be of any help. It just adds a layer of security for people who are extra careful with their passwords.
    There can be several issues.
    Mobile sites can exist on a different subdomain. The sites m.example.com and www.example.com are two different websites and Firefox will not share passwords between the two. There could be two different companies running the m.example.com and www.example.com thus it is not safe to share account info.
    Some websites tell Firefox not to remember passwords using a flag called autocomplete="off".
    Some websites use complicated script to submit the form data. These can be difficult to detect.

  • Disabling auto-update doesn't work

    I need to stop at Firefox 14 for now, and need to prevent auto-updates.
    In Firefox 14.0.1 when I disable auto-update by setting 'never check for updates', and/or use about:config to clear 'app.update.url', both settings are ignored. When I close and re-open Firefox, auto-update is again enabled, and the update URL is again set.
    Recommendations?

    As it turns out, it's not a matter of 'preferences not being saved'.
    It's Firefox spontaneously changing my preferences at start-time.
    I've been testing; here's what i discover.
    1. I install FF14, start it the first time, and disable auto-update (via Tools/Options/Advanced)
    At this point - prefs.js in my profile now starts with
    user_pref("app.update.auto", false);
    user_pref("app.update.enabled", false);
    2. now I exit FF.
    prefs.js in my profile STILL starts with
    user_pref("app.update.auto", false);
    user_pref("app.update.enabled", false);
    3. i restart FF (#1)
    prefs.js in my profile STILL starts with
    user_pref("app.update.auto", false);
    user_pref("app.update.enabled", false);
    4. i close FF
    prefs.js in my profile STILL starts with
    user_pref("app.update.auto", false);
    user_pref("app.update.enabled", false);
    5. I restart FF (#2)
    NOW prefs.js has dropped those 2 initial lines, and starts with user_pref("app.update.lastUpdateTime.addon-........etc
    Firefox is spontaneously changing my prefs.js.
    Before this series of tests I adjusted the prefs.js in all other profiles in this XPSP3 machine to start with
    user_pref("app.update.auto", false);
    user_pref("app.update.enabled", false);
    This is obnoxious.
    I expect better from Mozilla.
    Suggestions?

  • Why did my email auto fill quit working with Yahoo mail?

    This week my e-mail address auto-fill quit working with AT&T Yahoo, but still works when using the Safari browser on my Mac. Actually found 22 posts dating back to a year ago for people having the same problem, so guess this is ongoing and happening randomly. Is there a fix, or do I have to abandon Firefox and go back to using Safari?

    I have this question too. My iphone 5 is new from t-mobile, and I restored it from my own backup on my factory-new laptop. I am curious who this person is, and whether my "new" iphone may actually be refurbushed?

  • I changed the "keyword url" setting in about:config to allow it to be used as a google search box, but when I exit and restart firefox it reverts to its previous setting.

    chrome://browser-region/locale/region.properties
    This is the URL that is in "keyword:URL" in about:config in my Firefox 4. I attempted to change it to http://www.google.ie/search?q= so as to use the address bar as a search bar. It works fine while Firefox remains open, but when I exit and come back later to open Firefox and use the address bar for search items I find that it has reverted to the default setting.
    Can you please help me resolve this issue?
    Thanks

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    You can start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • How do I stop Firefox mobile from making it's own connections to Google, AmazonAWS and netDNA despite choosing every available opt-out?

    If I visit a simple web page which doesn't contain any 3rd party content I can still see Firefox Mobile making secure connections to:
    108.161.188.224 - Registered to netDNA in the US
    74.125.230.* - Various Google servers
    23.21.86.68 23.23.293.51 and many more - Amazon AWS servers
    These always follow any page load, browsing from a desktop system makes no such connections and are established on a website such as lwn.net which have no 3rd party content on their pages.
    I have unticked all options in telemetry and have no sync set up, I even tried disabling things like Safebrowing and add-on update checks in about:config but the very concerning connections remain.
    Please help me find the option to make this stop. As the communications are secure I can't look at what they might contain and it baffles me as to what purpose they serve but question one is how on earth do I disable the worrying connections to companies I choose to avoid.

    Hi tryingtoescape,
    On Firefox for Android there is a new experimental about page that tells you all of the network connections being made in Firefox.
    Try it, go to [about:networking]
    To disconnect, go to Settings > Privacy > Clear Private Data then restart Firefox on the Android device. This will minimize the active sockets.
    However even in private guest session there is safebrowsing.google.com, the default search engine and attached accounts. But you have already found a way to disconnect thest.
    Does clearing the Private Data make an improvement?
    For specific connections mentioned:
    108.161.188.224 - Registered to netDNA in the US 74.125.230.* - Various Google servers 23.21.86.68 23.23.293.51 and many more - Amazon AWS servers
    You may be able to try an add on, one found was: [https://addons.mozilla.org/en-US/android/addon/silentblock/?src=search]

  • I can't see the body of emails in hotmail when using firefox 37.0.1 I can see them in IE and firefox mobile. Help please

    I resend some emails regularly with only slight changes to the email so I usually do a "reply all" or "forward" . Recently I cannot see the text in the body of the emails using FireFox, however I can see the complete email when using FireFox mobile or Internet Explorer. Any ideas what is causing the problem and how to fix it? I have tried to copy and paste the text into a new email but that didn't work.
    I am using Windows 7 SP1 Home Premium and FireFox 37.0.1
    Any help would be appreciated.

    ''FredMcD [[#answer-718738|said]]''
    <blockquote>
    ''ajfollack [[#answer-718681|said]]''
    <blockquote>
    Disabling the adobe plugin . . . . did not resolve issue
    </blockquote>
    DO NOT disable old program. REMOVE them.
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.
    </blockquote>
    I uninstalled Adobe reader, then did the rest of your suggestions but the problem remains. It is only with 3 emails that get resent daily with slight changes to the text. It is like most of the text has been removed from the email.
    Thanks for the suggestions and advice

  • Disable auto-updates/Adobe Application Manager

    there is no forum for this - I use Illustrator and Photoshop CS6 non-CC on macbook pro running 10.8.5 or 10.9.2. I would like to not have AAM search for updates in the background, but initiate the **search** for updates manually. The reason is that I live a bit off the grid and pay quite a lot per minute, and AAM kept the internet connection open the whole night, even though the browser said it was closed.
    I only found instructions for CS5:
    http://helpx.adobe.com/creative-suite/kb/disable-auto-updates-application-manager.html
    does this work for CS6 the same way? I am by no means a system admin but I can replace this AdobeUpdaterPrefs.dat file. (and keep the original else where)
    thanks.
    edit: why on earth does adobe insist on displaying my real name in a public forum, when it even asks me to make a screen name first. There is no forum for this either, I guess.

    ... adobe insist on displaying my real name in a public forum...
    that is gone, thanks.

  • How to disable click for open a app mobile? i have picture.

    how to disable click for open a app mobile?
    How i do?
    why adobe captivate need to click for open app.
    i need to open auto.
    thank you

    Swiping down from the midle of the screen will open the search window on its upper section.

  • Disable Auto Orientation only in a specific frame!

    Hi there! 
    I appreciate if you please guide me with your experience in Mobile App design.
    My App contains 5 frames of data (movieclips), that each frame has 2 designs:
    1- Stand mode design    (portrait)
    2- Wide mode design     (landscape)
    So far it works great and I have published my App both on Google Play and Apple Store.
    Frames structure is as follows:
    frame   1            Loads External Data
    frames 2-6         Each frame contains 1 MovieClip designed based on mobile "Stand mode"
    frames 22-26     Each frame contains 1 MovieClip designed based on mobile "Wide mode"
    (Example: contents of frame 2 and 22 are the same, also 3 & 23 ... 6 & 26)
    (frame 2 is STAND design, 22 is WIDE design, and so on)
    In "Air Setting Dialoge", I have selected aspect ratio "Auto" and "Auto orientation".
    And I have this code in Frame 1 to do the rotation trick:
    stage.addEventListener(Event.RESIZE, resizeLayout);
    function resizeLayout(e:Event):void
                   setPosition();
    function setPosition():void
            //Phone turned from "Wide" to "Stand"
                   if (stage.stageWidth < stage.stageHeight)
                                  //App is now in "Wide" mode - means between frame 22 to 26
                                  if (currentFrame>20) 
                                                 //go to the same position of App but in "Stand" mode
                                                 gotoAndStop(currentFrame - 20);
                   else
                                  //Phone turned from "Stand" to "Wide"
                                  if (currentFrame<20)
                        //go to the same position of App but in "Wide" mode 
                         gotoAndStop(currentFrame + 20);
    Well, and finally my question:
    1- Is this way I have programed my App to rotate, a proper approach?!
          (in this way I can easily arrange objects on screen and also position them based on math calculations)
    2- If I want to disable auto rotation only when app reaches specific frames, what should I do??
       (for example I want the app Not to auto oriente in Frame 6 and 26., but it rotates in other frames)
    Hope it was not confusing and I cant wait to check out your valuable guidance!
    All the best and thanks a lot for your time.

    Hi there all!!
    Still I have no answer for my question No1, BUT I could find my answer to the 2nd question and here it is for your kind notice:
    Special thanks to Daniel Dura
    http://www.adobe.com/devnet/flash/articles/screen_orientation_apis.html
    I just added this code to my first Frame:
    stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, onOrientationChanging);
    function onOrientationChanging(event:StageOrientationEvent ):void
              if (currentFrame == 6 || currentFrame == 26)
                        event.preventDefault();

  • Is there a way to disable auto advance permanently?

    Is there a way to disable auto advance permanently?
    I know how to disable auto advance by clicking photo tab and unchecking auto advance, however I would like to have this feature permanently disabled. It really messes up my workflow!
    It’s getting very frustrating to have to remind myself with each project to disable the function prior to commencing work. Any suggestions?
    Thank you,

    The auto advance setting should be remembered between Lightroom sessions.  It does on my system  Lr5.5 OSX 10.8.5.   The shortcut for autoadvance is CapLock and if you have the CapLock key turned on when you open Lr it will turn auto advance on.  Turn CapLock off and make sure auto advance is off in the menu and then exit and reload Lr.  It should then be off.  If this doesn't work I would delete the Preferences file and rebuild it.  Maybe something is stuck.  I think READING the CapLock key on startup instead of reading the Preferences on startup is a bad design or maybe this is a random glitch/bug.  Don't leave my CapLock on so my testing was minimal.  Hopefully someone else will chime in.

Maybe you are looking for

  • Error while generating wsdd file

    Hi, When I tried to generate a wsdd file from a wsdl file i have encountered the follwoing errors. Please help me on this. I have typed the follwing command to generate a wsdd file: java org.apache.axis.wsdl.WSDL2Java -o . -d Session -s -S true tax.w

  • Question:In Adobe Acrobat XI Standard-sticky notes

    Question: In Adobe Acrobat XI Standard-sticky notes created in the document pane are visible, but when i save the file and then reopen it they are listed in the navigation pane (model tree). Any thoughts ???? Any comments ????? This did not happen in

  • Itunes wont start on windows xp

    i reinstalled itunes but it wont open now i even tried this source  http://support.apple.com/kb/TS1776 and deleted SC info.sidb and restart my computer but it still not opening up. i have reinstalled itunes more than 2 times and also deleted apple se

  • What is the use of Externalizable interface?

    What is the use of Externalizable? and what is the diff b/w Serializable and Externalizable interfaces?

  • How to get sales order item information

    Hello All,    I ahve defined a new, custom condition type and created a routine in alternate condition type.    While creating a sales order, when the routine is getting executed, i need the sales order item information. i.e. i need to access VABP ta