Disable range serving using "Accept-Ranges :none" ??

SunOne Web server 6.1 SP2,
SunOS 5.9
Hi,
Probably a simple question, but give a newbie a chance :-)
I would like to disable the range serving of objects (specifically pdf's) on one set of my infrastructure.
This is to get around the problem with some proxy servers that claim to support byte range served documents, but actually fail to do so (squid for instance).
I am aware that the "Accept-Ranges" header can be set to ":none", RE: RFC 2616, section 14.5 which will perform this function but can't find where to set it using any documentation, online or otherwise?
Does anyone know if this is possible and if so where it is done?
Many thanks
Chris

To add an Accept-ranges: none header whenever the server sends a PDF, overriding any Accept-ranges: bytes header, you could add the following immediately below the <Object name="default"> line in the obj.conf configuration file:Output type="application/pdf" fn="set-variable" set-srvhdrs="Accept-ranges: none"To set the header on all responses, simply remove the type="application/pdf" parameter.

Similar Messages

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

Firefox has detected that the server is redirecting the request for this address in a way that will never complete. * This problem can sometimes be caused by disabling or refusing to accept cookies.

Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
* This problem can sometimes be caused by disabling or refusing to accept
cookies.

In my experience this is most of the times a server issue of the website provider.
Does this error occur on all Websites or just one specific Website?
Does this Website load in Internet Explorer (or any other Browser?)?

Firefox has detected that the server is redirecting the request for this address in a way that will never complete. *This problem can sometimes be caused by disabling or refusing to accept cookies. I followed the instructions for "redirection" issues.

Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
* This problem can sometimes be caused by disabling or refusing to accept
cookies.

In my experience this is most of the times a server issue of the website provider.
Does this error occur on all Websites or just one specific Website?
Does this Website load in Internet Explorer (or any other Browser?)?

I keep getting Alarm popups saying that it cannot send msg using the server null. I think I have disabled email (I use Gmail) and the calendar however I still get these popups and I can't close them?

I keep getting Alarm popups saying that it cannot send msg using the server null.
I think I have disabled email (I use Gmail) and the calendar however I still get these popups and I can't close them?
How can I disable the Alarm popups?
Thanks
Brian

OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Google Mail recently implemented additional security measures "for your protection" of course. The manifestation of that may be the requirement to create a unique, "application-specific" password for each one of the various Google services you may use. That requirement probably includes Google Mail. So if the above Apple Support document doesn't resolve the problem, research Google's application-specific password requirements, and how to configure Mail to use it.
I asked the Hosts to edit or obscure the email address in your post.

How to read XML file kept on NON-SAP server using the Http URL ?

Dear Experts,
I am working on CRM2007 web UI. I need to read a XML file placed on a shared server location by a third party program. Then process that XML file into CRM and create a quotation using the data extracted from the file.
All i have with me is the http URL that points to the location of the file.
I am supposed to read the file , create quotation and at later point of time i would be asked to update the quotation and then generated new XML representing updated quotation and replace the XML file on shared server location with this new updated XML file.
I know how to extract data from XML file into ABAP but i have no clue as to how to access the file on some other server using the http url i have and how to read it ?
I searched on the forum and i found the codes for reading XML file that is located either on client machine OR on the Application server wheareas my file is on some other than sap application server.
Please help me as its an urgent issue .
Points will be rewarded for sure.
Please help.
Thanks in advance,
Suchita.
p.s. : the http url to the file location is like -->
http://SomeServerDomain/SomeDirectory/file.xml

hi,
interesting task.
to request the file by a http call you need to create an if_http_client object.
More info is [here|http://help.sap.com/saphelp_nwmobile71/helpdata/en/e5/4d350bc11411d4ad310000e83539c3/frameset.htm]
to parse the file you either have to work with the ixml packages ([info|http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/b5413acdb62f70e10000000a114084/content.htm]) or you use an XSLT transformation ([info|http://help.sap.com/saphelp_nwmobile71/helpdata/en/a8/824c3c66177414e10000000a114084/content.htm]).
uploading the final file isn't so easy. if you only have http, you should write a server script to allow uploading of the new file and copying it into the place of the old file. but you definitely need the script.
now it's your take. depending on how experienced you are in ABAP and networking this might turn out to be easy or pretty complicated.
have fun,
anton

SQL Verification Problem / Muse Form Issue (Server uses MySQL muse uses SQLite) I'm in desperate need of help

       Alright well here is my issue... I have been trying to fix it on my own for the past week non stop and I have finally came to a solid conclusion as to the cause of the issue.
   I always get the error "The server has encountered an error..." in red text when anyone tries to submit a form and also when I try and test it myself. This led me to test the server / site for compatibility or issues by using the test:
mydomain.com /scripts/form_check.php
I got the first two checks green (pass) and the third test threw a red check meaning I was having an issue with SQL verification. This then led me to days of trying to work with my hosting provider (one.com) trying to solve the problem and I was told that they use mySQL on their servers and that they couldn't do anything on their end to solve the issue. I read alot that we are recommended in this case to try and get our host to add the SQLite database to their server or whatever it is they would do, long story short I guess many people are able to ask their host to make SQLite work and most accept and add SQLite functionality to their servers but unfortunately my hosting provider doesn't want to do this and they said they were sorry and that I would need to either switch the script to work with mySQL or figure something else out...
   I took a lot of time building my site and I dont want to take the form out. I absolutely need it... I know many post on here saying "forms dont work, oh poop " or "adobe sucks I dont want to use business catalyst grrr" but I tried to find the source of the problem and I've successfully came to the conclusion that my issue is that my script wants to use SQLite but in order for my sites forms to work the server needs to have SQLite as well... My idea is that if I can configure the script and the site itself to use mySQL instead of SQLite the SQL verification will then not be an issue and my websites forms will function with no issues. I am curious if a member of the staff with adobe has experience with this particular issue and can help me out? or if a member of the adobe community has solved this problem? If not I am hoping that with the description I provided that someone with knowledge of mysql, sqlite or code in general could help me modify the script or write a new script that will allow the forms to work properly. I know its a long shot, I say that because this discussion is full of people who used muse in favor of dreamweaver because just like a large number of people in the muse discussion area, I'm a graphic designer, with plenty of computer experience, art and design skill and I am extremely familiar with photoshop. Muse is perfect in so many ways. In fact, like I mentioned above, I don't even have a complaint at this time about muse. I understand the form issue in this case, and I imagine in thousands of other users situations, is all just a matter of scripts and compatibility.. Its just a little issue between the SQLite scripts we are all given when we export our muse website and the SQL version our various hosting service may be using on their servers.
   Just incase I missed anything, to provide just a bit more info on the topic and myself for anyone who may be able to help:
I can alter the text inside of the scripts easily if anyone happens to know any lines of code that easily solve this issue (making the muse contact forms, which are native to SQLite, functional on a server using mySQL)
I was told one way I could make the forms work on a server using mySQL (or any version other than SQLite) If I were to make changes to adobe muses SQL version by converting the SQLite db to mySQL db (db = database)
I am computer literate and I can take any directions necessary, I really just need to get this done, I really appreciate any help I can get!!
Thank you in advance,
Roy

<?php
If you see this text in your browser, PHP is not configured correctly on this hosting provider.
Contact your hosting provider regarding PHP configuration for your site.
PHP file generated by Adobe Muse CC 2014.1.6
function formthrottle_check()
    if (!function_exists("sqlite_open"))
        return '1';
    $retCode ='5';
    if ($db = @sqlite_open('muse-throttle-db', 0666, $sqliteerror))
        $res = @sqlite_query($db, "SELECT 1 FROM sqlite_master WHERE type='table' AND name='Submission_History';", $sqliteerror);
        if ($res == null or @sqlite_num_rows($res) == 0 or @sqlite_fetch_single($res) != 1)
            $created = @sqlite_exec($db, "CREATE TABLE Submission_History (IP VARCHAR(39), Submission_Date TIMESTAMP)", $sqliteerror);
            if($created)
                @sqlite_exec($db, "INSERT INTO Submission_History (IP,Submission_Date) VALUES ('256.256.256.256', DATETIME('now'))", $sqliteerror);
            else
                $retCode = '2';
        if($retCode == '5')
            $res = @sqlite_query($db, "SELECT COUNT(1) FROM Submission_History;", $sqliteerror);
            if ($res != null and @sqlite_num_rows($res) > 0 and @sqlite_fetch_single($res) > 0)
                $retCode = '0';
            else
                $retCode = '3';
        @sqlite_close($db);
    else
        $retCode = '4';
    return $retCode;
function formthrottle_too_many_submissions($ip)
    $tooManySubmissions = false;
    if (function_exists("sqlite_open") and $db = @sqlite_open('muse-throttle-db', 0666, $sqliteerror))
        $ip = @sqlite_escape_string($ip);
        @sqlite_exec($db, "DELETE FROM Submission_History WHERE Submission_Date < DATETIME('now','-2 hours')", $sqliteerror);
        @sqlite_exec($db, "INSERT INTO Submission_History (IP,Submission_Date) VALUES ('$ip', DATETIME('now'))", $sqliteerror);
        $res = @sqlite_query($db, "SELECT COUNT(1) FROM Submission_History WHERE IP = '$ip';", $sqliteerror);
        if (@sqlite_num_rows($res) > 0 and @sqlite_fetch_single($res) > 25)
            $tooManySubmissions = true;
        @sqlite_close($db);
    return $tooManySubmissions;
?>

Is sql server using trigger to capture change data in SQL server CDC?

hi all,
what is the Architecture of SQL server change data capture(CDC)? is sql server using trigger to capture change data in SQL server CDC? for example Change Data Capture (CDC) in SQL Server 2008 using we can capture change Data records INSERTs, UPDATEs, and
DELETEs applied to SQL Server tables.so my question is SQL server using triggers to capture change data like INSERT TRIGGER, UPDATE TRIGGER and DELETED TRIGGER using each tables after enabled CDC...?
Thanks
Tharindu Dhaneenja
Tharindu Dhaneenja http://dhaneenja.blogspot.com

It is not using triggers. The source is the transaction log.
Related link:
Basics of Change Data Capture
...The source of change data for change data capture is the SQL Server transaction log. As inserts, updates, and deletes are applied to tracked source tables, entries that describe those
changes are added to the log. The log serves as input to the change data capture capture process. This reads the log and adds information about changes to the tracked table’s associated change table. Functions are provided to enumerate
the changes that appear in the change tables over a specified range, returning the information in the form of a filtered result set. The filtered result set is typically used by an application process to update a representation of the source in some external
environment. ...
Kalman Toth, SQL Server & Business Intelligence Training; SQL Server 2008 Training

How to make integrated weblogic server use log4j

Hi all,
I use Jdeveloper 11.1.1.6, WL 10.3 on Win7. JDK 1.6.0.3x64
I tried to configure for 1 day during according to guides and informations on net. But i can not make it works unfortunately. Just after i start wls, encountered this:
<14-12-2012 10:42:00 o'clock EET> <Error> <Log Management> <BEA-170022> <Log4j failed to initialize for DefaultServer. The default JDK Logging implementation will be used.
java.lang.ClassNotFoundException: weblogic.logging.log4j.JDKLog4jAdapterFactory
     at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
     Truncated. see log file for complete stacktrace
>
I followed up basically through those links log4j Configuration in Standalone Weblogic Server - ADF and http://docs.oracle.com/cd/E15051_01/wls/docs103/logging/config_logs.html#using_log4j
I changed Logging implementation as Log4j from JDK: http://www.2hotfile.com/image.php?di=72YU
I created log4j.xml file under my %DOMAINHOME%\config : http://www.2hotfile.com/image.php?di=JHLI
<?xml version="1.0" encoding="UTF-8" ?><!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<param name="Threshold" value="INFO"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern"
value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<appender name="FILE" class="org.apache.log4j.DailyRollingFileAppender">
<param name="File" value="/log/daily.log"/>
<param name="Append" value="false"/>

<param name="DatePattern" value="'.'yyyy-MM-dd"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>
</layout>
</appender>
<logger name="org.apache">
<level value="WARN"/>
</logger>
<root>
<level value="DEBUG"/>
<appender-ref ref="FILE"/>

</root>
</log4j:configuration>
i copied log4j.jar, wllog.jar into my %DOMAINHOME%\lib : http://www.2hotfile.com/image.php?di=BYB3
Even i copied commons-logging-1.0.4.jar and com.bea.core.weblogic.commons.logging_1.4.0.0.jar files into the lib folder and then i set CLASSPATH accordingly, result was negative.
I added these lines into startWeblogic.cmd
@REM customized here for log4j
set LOG4J_CONFIG_FILE=%DOMAIN_HOME%\config\log4j.xml
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.log.Log4jLoggingEnabled=true -Dlog4j.debug -Dlog4j.configuration=%LOG4J_CONFIG_FILE%
set SAVE_CLASSPATH=%CLASSPATH%;%DOMAIN_HOME%\config;
Additionally, i have tried adding log4j.jar into sysyem classpath becuse of classloading problem suspicion: http://www.2hotfile.com/image.php?di=7Y3N after view this link http://www.coderanch.com/t/479763/BEA-Weblogic/Log-Weblogic-ClassNotFoundException
Thanks in advance...
Edited by: webyildirim on 14.Ara.2012 02:45

I resolved the exception; Jdeveloper 11.1.1.4 was setted up on my pc as well. That was the cause of problem. System was looking some paths on 11.1.1.4 server folders that belong to 11.1.14 version.
Now, created server log which i defined in log4j.xml but no log line found in file, nothing logged according to log4j.xml config file and wls still writes its own log into its own log file which is under $domain_home$\servers\DefaultServer\logs\DefaultServer.log. What might be the reason?
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/"
debug="true">

<appender name="FILE" class="org.apache.log4j.DailyRollingFileAppender">
<param name="File" value="./server.log"/>
<param name="Append" value="false"/>

<param name="DatePattern" value="'.'yyyy-MM-dd"/>

<layout class="org.apache.log4j.PatternLayout">

<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>

</layout>
</appender>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<param name="Target" value="System.out"/>
<param name="Threshold" value="INFO"/>
<layout class="org.apache.log4j.PatternLayout">

<param name="ConversionPattern" value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<category name="org.apache">
<priority value="DEBUG"/>
</category>
<category name="com.weblogic">
<priority value="DEBUG"/>
</category>
<category name="com.roketsan">
<priority value="DEBUG"/>
</category>
<category name="org.hibernate">
<priority value="DEBUG"/>
</category>
<category name="log4j.category.org.hibernate">
<priority value="DEBUG"/>
</category>
<category name="log4j.category.org.hibernate.SQL">
<priority value="STDOUT"/>
</category>
<root>
<appender-ref ref="CONSOLE"/>
<appender-ref ref="FILE"/>
</root>
</log4j:configuration>
jdeveloper integrated weblogic console output: http://www.2hotfile.com/image.php?di=TPY2
*** Using port 7101 ***
C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
'LOG4J_CONFIG_FILE' i‡ ya da dis komut, ‡alistirilabilir
program ya da toplu is dosyasi olarak taninmiyor.
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK16~1.0_3\lib\tools.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1.6\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1.6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\wcps-lib\derby-10.6.1.0.jar;C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\wcps-lib\derbytools-10.6.1.0.jar;C:\Oracle\Middleware_11.1.1.6\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;C:\Oracle\Middleware_11.1.1.6\jdeveloper\webcenter\modules\wcps_11.1.1.6.0\wcps-connection-mbeans.jar;C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\xqrl.jar;.
PATH=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_3\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Program Files\Java\jre6X64;C:\Program Files\Java\jre6X64\bin;C:\Oracle\database\app\oracle\product\11.2.0\server\bin;C:\Oracle\database\app\oracle\product\11.2.0\server;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Dell\Dell Wireless WLAN Card;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Dijitaluser\Desktop\Yeni klas”r\commons-logging-1.0.4.jar;;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_3\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=52130 -Djavax.net.ssl.trustStore=C:\Oracle\Middleware_11.1.1.6\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1.6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\oracle\store\gmds -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify -Doracle.webcenter.analytics.disable-native-partitioning=false -Doracle.webcenter.tagging.scopeTags=false -XX:+UseParallelGC -XX:+DisableExplicitGC -Dportlet.oracle.home=C:\Oracle\Middleware_11.1.1.6\jdeveloper -Dwc.oracle.home=C:\Oracle\Middleware_11.1.1.6\jdeveloper -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sysext_manifest_classpath -Dlog4j.ignoreTCL=true -Dweblogic.log.Log4jLoggingEnabled=true -Dlog4j.debug weblogic.Server
Listening for transport dt_socket at address: 52130
Debugger connected to local process.
<18-Dec-2012 13:58:09 o'clock EET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<18-Dec-2012 13:58:10 o'clock EET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<18-Dec-2012 13:58:10 o'clock EET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\com.bea.core.weblogic.commons.logging_1.4.0.0.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\log4j-1.2.15.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\mbeantypes\csp-id-asserter.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\mbeantypes\jps-wls-trustprovider.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\wllog4j.jar>
<18-Dec-2012 13:58:10 o'clock EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.5-b03 from Sun Microsystems Inc.>
<18-Dec-2012 13:58:11 o'clock EET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<18-Dec-2012 13:58:12 o'clock EET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00016. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<18-12-2012 13:58:12 o'clock EET> <Notice> <Log Management> <WL-170019> <The server log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
log4j: Trying to find [log4j.xml] using context classloader java.net.URLClassLoader@7df44ec7.
log4j: Using URL [file:/C:/Users/Dijitaluser/AppData/Roaming/JDeveloper/system11.1.1.6.38.61.92/DefaultDomain/log4j.xml] for automatic log4j configuration.
log4j: Preferred configurator class: org.apache.log4j.xml.DOMConfigurator
log4j: System property is :null
log4j: Standard DocumentBuilderFactory search succeded.
log4j: DocumentBuilderFactory is: weblogic.xml.jaxp.RegistryDocumentBuilderFactory
log4j: debug attribute= "true".
log4j: reset attribute= "false".
log4j: Threshold ="null".
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [org.apache] additivity to [true].
log4j: Level value for org.apache is [DEBUG].
log4j: org.apache level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [com.weblogic] additivity to [true].
log4j: Level value for com.weblogic is [DEBUG].
log4j: com.weblogic level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [com.roketsan] additivity to [true].
log4j: Level value for com.roketsan is [DEBUG].
log4j: com.roketsan level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [org.hibernate] additivity to [true].
log4j: Level value for org.hibernate is [DEBUG].
log4j: org.hibernate level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [log4j.category.org.hibernate] additivity to [true].
log4j: Level value for log4j.category.org.hibernate is [DEBUG].
log4j: log4j.category.org.hibernate level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [log4j.category.org.hibernate.SQL] additivity to [true].
log4j: Level value for log4j.category.org.hibernate.SQL is [STDOUT].
log4j: log4j.category.org.hibernate.SQL level set to DEBUG
log4j: Class name: [org.apache.log4j.ConsoleAppender]
log4j: Setting property [target] to [System.out].
log4j: Setting property [threshold] to [INFO].
log4j: Parsing layout of class: "org.apache.log4j.PatternLayout"
log4j: Setting property [conversionPattern] to [%d{ABSOLUTE} %-5p [%c{1}] %m%n].
log4j: Adding appender named [CONSOLE] to category [root].
log4j: Class name: [org.apache.log4j.DailyRollingFileAppender]
log4j: Setting property [file] to [./server.log].
log4j: Setting property [append] to [false].
log4j: Setting property [datePattern] to ['.'yyyy-MM-dd].
log4j: Parsing layout of class: "org.apache.log4j.PatternLayout"
log4j: Setting property [conversionPattern] to [%d %-5p [%c] %m%n].
log4j: setFile called: ./server.log, false
log4j: setFile ended
log4j: Appender [FILE] to be rolled at midnight.
log4j: Adding appender named [FILE] to category [root].
<18-12-2012 13:58:12 o'clock EET> <Warning> <NodeManager> <WL-300043> <Node manager native library not found - server process id not saved.>
<18-12-2012 13:58:13 o'clock EET> <Error> <Socket> <WL-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in: 'C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_3\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Program Files\Java\jre6X64;C:\Program Files\Java\jre6X64\bin;C:\Oracle\database\app\oracle\product\11.2.0\server\bin;C:\Oracle\database\app\oracle\product\11.2.0\server;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Dell\Dell Wireless WLAN Card;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Dijitaluser\Desktop\Yeni klasör\commons-logging-1.0.4.jar;;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8;.'
>
<18-12-2012 13:58:19 o'clock EET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<18-12-2012 13:58:20 o'clock EET> <Warning> <Store> <WL-280101> <The persistent file store "_WLS_DefaultServer" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<18-Dec-2012 13:58:20 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:20 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log00001. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log.>
<18-12-2012 13:58:23 o'clock EET> <Notice> <StdErr> <BEA-000000> <java.util.logging.ErrorManager: 0: oracle.core.ojdl.weblogic.DomainLogHandler ERROR: unable to find instance of weblogic.logging.DomainLogBroadcastHandler>
<18-12-2012 13:58:25 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to STANDBY>
<18-12-2012 13:58:25 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to STARTING>
<18-12-2012 13:58:29 o'clock EET> <Warning> <J2EE> <WL-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Roketsan is not versioned.>
<18-Dec-2012 13:58:37 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:37 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00016. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<18-12-2012 13:58:37 o'clock EET> <Notice> <Log Management> <WL-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<18-12-2012 13:58:37 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to ADMIN>
<18-12-2012 13:58:37 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to RESUMING>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[11]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Warning> <Server> <WL-002611> <Hostname "AD190", maps to multiple IP addresses: 169.254.50.94, 192.168.26.212, fe80:0:0:0:a1be:61f:f156:325e%38>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:a1be:61f:f156:325e:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[10]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a9fe:325e:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:a0d0:352d:6b23:d7dc:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:648c:26dc:32a5:1300:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:c0a8:1ad4:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:34a0:7762:7e2f:fca8:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default" is now listening on 192.168.26.212:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[2]" is now listening on 169.254.50.94:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:fdaf:7651:30df:acb6:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to RUNNING>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 30110 ms.
IntegratedWebLogicServer started.
Edited by: webyildirim on 18.Ara.2012 04:17

Vaibility of RTP relay server using JMF

Hello!
I am thinking of making an RTP server that would just relay the streams received from single user to multiple users.
I want to ask following questions:
1- Is it viable to make such a Server using JMF?
2- If it is, then how should I proceed?
3- Should I need to create Processor for each recieved stream at the server or just cloning the DataSource received and sending them using separate RTPManagers would solve my problem?
4- Is cloning of data source needed at all?
I am asking this before doing any coding just in case if it is not possible than you warn me ,and because I had real bad experiences while cloning the data source and this server, I think depends on cloning.
Else, I want some help regarding code. I would highly appreciate some code snippets.
Thanks in advance.
Thanks!
P.S.: captfoss, Are you listening?

Now some simple questions from a novice, thats me:I will answer them out of order
3- Are these terms specific to JMF or are they general Networking terms?They are general networking terms.
2- What is difference b/w unicasting and multicasting?Uni = Latin prefix for "one".
Multi = Latin prefix for "many"
Broad = Latin prefix for "all" (okay, this one is probably not true, but...)
unicast = sending data to a single recipient.
broadcast = sending data to all recipients.
multicasting = sending data to many recipients.
It deals with how the underlaying UDP packets are handled.
Unicast addresses the packets to a specific host, so all other hosts that receive those packets go "Not for me" and ignore it.
Broadcast addresses the packets to a special IP address, the broadcast ip, so all hosts that receive it say "Oh, this is a broadcast message so it's for me"
Multicast addresses the packets to an IP address in a special range (Class D addresses), and all hosts can opt to join in to the "multicast session". If they join the multicast session, it basiclly means when they receive packets addressed to any multicast addresses that they have joined the session of, they will consider those packets to be "for them".
1- What exactly is multicasting in JMF?JMF multicasting is basiclly where the "host" can send out a single stream, and any number of "clients" can receive the stream.
4- How multicasting is handled at Transmitter and Reciever side using JMF, some java statements please.Multicasting is almost handled "automaticlly".
It's handled by giving the transmitter a multicast IP address to send to. "224.123.123.123" is an example of the one I always used for testing (because it was easy to remember). Transmitting multicast packets is handled automaticlly.
Receiving multicast packets requires a little special handling.
From AVReceive2.java
if( ipAddr.isMulticastAddress()) {
    // local and remote address pairs are identical:
    localAddr= new SessionAddress( ipAddr,
                       session.port,
                       session.ttl);
    destAddr = new SessionAddress( ipAddr,
                       session.port,
                       session.ttl);
} else {
    localAddr= new SessionAddress( InetAddress.getLocalHost(),
                            session.port);
    destAddr = new SessionAddress( ipAddr, session.port);
}The main difference here is that your "local" address isn't going to be LocalHost address, "127.0.0.1", it's going to be the multicast address.
And you should define the TTL (time to live) for the SessionAddress because multicast packets can only travel a certain number of "hops" (number of times forwarded).
But honestly, I'm pretty sure I ripped that IF statement out and multicasting still worked (but I define the TTL for unicast as well, so bear that in mind...)
Ignoring all of the stuff above, multicasting is a great idea for a local LAN application where there are no routers between the host and the clients. If you've got a router between them, then the router may not forward the multicast packets and your stream may never get to the remote clients.
That's why in my project, which is web based, clients attempt to get the multicast packets and if they fail at that, then they request a unicast from my server.

Do you have to disable UPNP to use port fordwarding

I have a E3000 and I am having a bunch of problems getting xbox live to work. I have a feeling I am going to have to go the port forwarding route. The question I have is do I have to disable upnp to use port forwarding or can I just leave it on?

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
Click on "Administration" tab and disable the option UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox, IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox, Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Cannot Connect to Essbase Server Using MaxL

After installing and configuring planning. I was able to create data source and application. When I shot down and restart the machine. The diagnostics report highlighted these srrors
EPMVAL - 01010 can not connect to Essbase server using MaxL
Network Error - 10061 unable connect to oracle.vision.com:1423. the client timed out waiting to connect Essbase Agent using TCP/IP
Can some help please
chi

Hi John
This is error from Sharedservices_security_client may it will you to identify the cause of this issue
PMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-04T17:29:20.953+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-04T17:29:24.906+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:13.515+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:19.359+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:24.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:08.812+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:14.875+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:18.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
Thanks
Chi

Is it possible to lock the keyboard of a client from a server using java

please explain wheterit is possible to lock the keyboard of a client from a server using java

You want to process code on one machine, and thereby lock the keyboard on another machine? No, that's not possible. It is extremely far from possible.
Of course, if the client is running software with security holes in it you might hack into it and crash the thing. This will lock up the keyboard pretty good. I hope that's not what you want ...
Or are you talking about a setup where you already have code running on the client, and some sort of communication between client and server? In that case what you need to know is whether it is possible to lock the keyboard at all. Once you have figured that out, it is trivial to add the communication code to have the server software tell the client software to lock the keyboard.
So what do you mean with "lock the keyboard"? It's pretty easy to remove/disable all keyboard related listeners in your own application. It's a lot harder (and AFAIK impossible with pure java) to disable alt-tabbing out of the application. And impossible, except from exploiting security holes, to lock the ctrl-alt-delete-combination on windows machine.

Unable to create a file in Application Server using OPEN DATASET stattement.

I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Services that need mail server - Use an outside mail server

Hello,
I have a mail server somewhere on the internet, and outside my localnetwork.
Our OSX local server serves few services : DNS (for local dns name) OD, Ical, Ichat, Afp, Mobile access, vpn
Do they services use mail server locally ?
Do I need to setup a mail server localy or can I use my outside mail server ?
If needed
If I just set on every OD users, a mail as [email protected] and if my internet mail servers has an account for them, how can I define for these users the smtp/pop accounts to allow them to send mail through my net mail server ?
Do I have to setup a local mail server and accept in my internet mmail server this local mail server to relay mail in ?
In fact, what I'd like is to keep this internet mail servers, and set all my OD users using this mail server.
Thanks for your help, and sorry for my poor English. Hope you undurstood

I don't think you need mail services running to use any of those services. I can't speak for mobile access because I don't use that service. I think iCal and iChat need an email address for each user. You can set that in the info tab for each user in workgroup manager.

Disable range serving using "Accept-Ranges :none" ??

Similar Messages

Maybe you are looking for