Disaster Recovery on another Sun Server

I have a question in regards to disaster recovery of Sun servers. We have a client that hosting applications within Sun T platform which utilizes LDOM configuration. These boxes host around five guests.
Currently we use a software called EMC HomeBase(http://www.emc.com/backup-and-recovery/homebase/homebase.htm) to enhance our DR recovery by profiling the Sun box and transmitting that profile to our DR vendor. DR vendor in turn with help from EMC will install the OS, patch level and apply that profile to setup the system with NIC information, file systems and other components so we would only
need to restore our data from NETBACKUP and don't do any system recovery.
Unfortunately, EMC does not support LDOMs nor containers. Now my question is if Sun has a way around this? Please note that the servers will be different models at DR. for example T5220 to a T5440 or V890 to V490.

It'd be rather easy to manually install same LDOM configuration on DR site... all EMC seems to be doing is getting the profile & then someone is creating setup manually...
Anyways... here you go:
Backup & Recovery of guest domain
Archive and backup the guest domain configuration:
ldm list-constraints -x <ldom> > <ldom>.xml
Backup the guest domains over the network with backup software as regular server
Restore the guest domain configuration, assuming that your VSW and VDS resources are available:
ldm add-domain -i <ldom>.xml
Make sure that you have enough VCPU, MAU, and Memory to boot your guest domain.
Jumpstart guest domain and install backup client. Restore data from backup.
Backup LDOM configuration
You can take the backup of the configuration using "ldm add-spconfig saveconfigurtion" command which will store in SP of the server.
For taking the backup of the individual domain use "ldm ls-constrants >> filename.xml" it will give the xml output just redirect it to a file.
While creating the domain again use "ldm create ldomname -f filename.xml"
You can not create control domain by the above procedure we hve to configure manualy or even if your control domain crashed install new OS and install LDOM Manager in the Base OS create /etc/hostname.vsw0 & vsw1 files poweroff the server from SP. set bootmode config=saveconfiguration
How to backup the primary domain
Backup the LDM db files in: /var/opt/SUNWldm
Archive and backup the primary domain configuration:
ldm list-constraints -x primary > primary.xml
Backup the primary domains over the network with backup software as regular server.
How to recover primary domain
Update firmware
Install backup client & LDM software
Restore /var/opt/SUNWldm
Start up LDM services
If all goes well, the LDM config will be read and you will be in initial configuration mode. Save the config to the hypervisor and
reboot. If not, parse the primary.xml file to recreate the primary domain configuration, save config, and reboot.
Restore guest domain configs and data. Then bring up guest domains.

Similar Messages

[Disaster recovery] Moving the Essbase server to another physical server

Hi All,
I have 3 Solaris servers part of the EPM 11.1.2.1 environment:
Server1.company.com:
Foundation services, APS, EAS
Server2.company.com:
Essbase Server, Essbase Studio Server.
Installation done on a SAN disk using user ID hypadmin
Server3.company.com:
*Nothing installed here*.
Its the standby server in case Server2 goes down.
Note: I couldn't find any documentation for my below approach... So please understand the risk involved before attempting the same.
Pre-disaster recovery:
I copy the home directory of hypadmin from Server2 to Server3.
During disaster recovery:
I update the Essbase server host name from Server2.company.com to Server3.company.com and similarly update the opmn.xml file.
Finally mount the SAN onto Server2 and start up the services.
Has anyone done the same..? Have you faced any issues? Is there a better way of doing this?
Thanks
Regards,
Kent

Hi,
I believe the usual way of doing this is to have a DR environment, rather than just one server (so for you you would have 2 DR servers). The DR environment has hosts file entries to map Production host names to DR IP addresses.
In DR you are connected to a separate SQL instance and you install and configure the products exactly as you would for Production (exactly the same hostnames).
Then when you are finished you shut down the DR environment and turn on SQL log shipping between the Production and DR databases.
If your Production environment goes down you stop the SQL log shipping, then you can bring up DR and change the DNS names (as required) to give your users access.
For Essbase storage you can either backup Production cubes to DR or mount the Production SAN in DR. The only problem with the latter is that if Production goes down and the SAN is lost you can't bring up DR fully either.
Let me know if you still have questions.
-Dan

Disaster recovery of remaining OVM server

Hi,
I hope some of you can help me with some disaster recovery tests I have to do shortly.
The environment has 2 OVM servers: servre1 and server2 in a server pool.
Server1 has the cluster filesystem shared to it via multiipathing, and in turn, server1 shares the repository and cluster fs with server2 via NFS.
In the meantime, there are other LUNS shared with just server2, which are being replicated with the repository and cluster fs that is currently being used.
If server1 "dies" and this is easy to simulate as just shutting it down, it will stop sharing the repository and fs with server2, the server pool will have errors, and so will server 1 (it cannot be contacted), and so will server2 (it has lost access to repository and cluster fs).
Oracle documentation explains very clearly how to add and remove server pools and servers neatly, but it makes no mention of how to clean up a server in order to reuse in on a new server pool, with a new repository, in this case, the replicated LUNs that were only in server2.
Has any of you done something similar to this? Do I have to go into the OVM Manager database at row level to delete every mention of the old repository? Is there a way of cleaning up the server2 for reuse (other than reinstalling)? In OVM 2.2 there was a cleanup.py script, but I didn´t find such script in 3.0.3...
Any suggestions on how to test this will be welcome. If I have overlooked some useful documentation on this, please point me to it...
Regards,
T.

Dan,
do you mean
sh ./ovm_upgrade.sh dbuser=ovs dbpass=<password> --fixup
Regards,
T.

Disaster Recovery Scripts for Managed Server MSI Startup

I am trying to get some custom start scripts created for each of my managed servers in the event the admin console is down or server gets hosed. We use nodemanager to start the managed servers in a Windows environment. I have about 8 managed servers and they all use the same nodemanager classpath but all have different server start arguments (different memory settings, etc....) so I need to make different custom scripts for each.
Verbose Garbage Collection to Determine Heap Size .....this thread by Jay has been very helpful but so far I am just getting kicked back to the syntax screen like something is wrong in my script. Attached is the script and the output when I run it. Any help would be appreciated...thanks.
startManagedFPCE1.cmd contents
java.exe -Xms400m -Xmx400m -classpath $CLASSPATH -Dweblogic.Name=FPCE1 -Dbea.home="C:\Oracle\Middleware" -Dweblogic.management.username=beaadmin -Dweblogic.management.password=beaadminxxx -Dweblogic.management.server=http://sitportal1:8098 -Djava.library.path=c:\Oracle\Middleware\wlserver_10.3\server\bin -Dweblogic.ext.dirs=C:\Oracle\Middleware\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_wlp1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_oepe1111\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\wlportal_10.3\p13n\lib\system;C:\Oracle\Middleware\wlportal_10.3\light-portal\lib\system;C:\Oracle\Middleware\wlportal_10.3\portal\lib\system;C:\Oracle\Middleware\wlportal_10.3\info-mgmt\lib\system;C:\Oracle\Middleware\wlportal_10.3\analytics\lib\system;C:\Oracle\Middleware\wlportal_10.3\apps\lib\system;C:\Oracle\Middleware\wlportal_10.3\info-mgmt\deprecated\lib\system;C:\Oracle\Middleware\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\Oracle\Middleware\wlportal_10.3\portal\lib\security
Results of running above script:
C:\Oracle\Middleware\user_projects\domains\SIT11\servers\FPCE1>java.exe -Xms400m -Xmx400m -classpath $CLASSPATH -Dweblogic.Name=FPCE1 -Dbea.home="C:\Oracle\Middleware" -Dweblogic.management.username=b
eaadmin -Dweblogic.management.password=beaadminsit11 -Dweblogic.management.server=http://sitportal1:8098 -Djava.library.path=c:\Oracle\Middleware\wlserver_10.3\server\bin -Dweblogic.ext.dirs=C:\Oracle
\Middleware\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_wlp1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_oepe1111\profiles\default\
sysext_manifest_classpath;C:\Oracle\Middleware\wlportal_10.3\p13n\lib\system;C:\Oracle\Middleware\wlportal_10.3\light-portal\lib\system;C:\Oracle\Middleware\wlportal_10.3\portal\lib\system;C:\Oracle\M
iddleware\wlportal_10.3\info-mgmt\lib\system;C:\Oracle\Middleware\wlportal_10.3\analytics\lib\system;C:\Oracle\Middleware\wlportal_10.3\apps\lib\system;C:\Oracle\Middleware\wlportal_10.3\info-mgmt\dep
recated\lib\system;C:\Oracle\Middleware\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\Oracle\Middleware\wlportal_10.3\portal\lib\security
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-server to select the "server" VM
-hotspot is a synonym for the "server" VM [deprecated]
The default VM is server.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options

"bharat nagwani" <[email protected]> wrote:
>
Hi,
Configuration: Weblogic 8.1SP2 on Windows 2000, 1 admin server and 14
managed
servers
whats the right way from these 2 scenarious to create a domain on managed
server
1. create domain on managed server using configuration wizard. Then point
to this
domain from administration server remote start tab(root directory). This
is what
we do so far.This is the best way to create managed servers for your domain.
>
2. Just enter user_projects/domains folder/$domain name$ in remote start
tab(root
directory)
on admin server console and when you start the managed server from
admin console
the domain folder and files will be created.
Yes, the managed server is started in this case at the root directory you specified.
The difference is in the
1. first case we see all scripts like startManagedWeblogic, setenv, boot.properties
etc
this may help(we still dont know) if one wants to bring up managed
server
manually using
startManagedServer.bat without using node manager.Yes, that is correct. You will need to edit the startManagedServer.bat to include
the admin server URL, username and paswword..
>
2. second case only 2-3 files get created like msi-config.xml and SerializedSystemIni.dat
Basically first case is superset of second case.
What is the experience of people in this regard?
thanks much
bharat

Can I swap HD into another Sun server?

Got a serious hardware problem on one of our servers.
Can I take the HD out and place into a same spec server and expect it to boot and work in the same way?
Edited by: 916515 on Feb 29, 2012 1:50 AM

Will I need to swap system id card too?What system do you have? Most of our systems have the hostid in the motherboard or system controller so you can't easily move it over. Some of our system did have a credit card size ID card which allowed you to do this. You only need the hostid to be the same if your applications use a licence daemon which will only work on the host they are licenced for.
Yes, it will be boot disk too. Im hoping to just stick new disks in new server and recover this. Any issues?If the two systems have different hardware configurations you'll need to run "boot -r" to do a reconfiguration boot.
I suspect the root disks in your source system are mirrored. If the root filesystem is UFS under SVM or VxVM control, make sure you go to underlying devices. If your system is using ZFS then zpool detach the mirror disk to remove it from the pool.
It would be less hassle and reduce the risk if you were to fix the HW issue on your current system. If you have a support contract with us, please log a service request and we can get parts and an engineer to you.

SQL Server 2005 High Availability and Disaster Recovery options

Hi, We are are working on a High Availability & Disaster Recovery Planning solution for an application database which is on SQL Server 2005. What different options have we got to implement this for SQL Server 2005 and after we have everything setup how
do we test the failover is working?
Thanks in advance.........
Ione

DR : Disaster recovery is the best option for the business to minimize their data loss and downtime. The SQL server has a number of native options. But, everything is depends upon your recovery time objective RTO and recovery point objective RPO.
1. Data center disaster
Geo Clustering
2. Server(Host)/Drive (Except shared drive) disaster
Clustering
3. Database/Drive disaster
Database mirroring
Log shipping
Replication
Log shipping
Log shipping is the process of automating the full database backup and transaction log on a production server and then automatically restores them on to the secondary (standby) server.
Log shipping will work either Full or Bulk logged recovery model.
You can also configure log shipping in the single SQL instance.
The Stand by database can be either restoring or read only (standby).
The manual fail over is required to bring the database online.
Some data can be lost (15 minutes).
Peer-to-Peer Transactional Replication
Peer-to-peer transactional replication is designed for applications that might read or might modify the data in any database that participates in replication. Additionally, if any servers that host the databases are unavailable, you can modify the application
to route traffic to the remaining servers. The remaining servers contain same copies of the data.
Clustering
Clustering is a combination of one or more servers it will automatically allow one physical server to take over the tasks of another physical server that has failed. Its not a real disaster recovery solution because if the shared drive unavailable we cannot
bring the database to online.
Clustering is best option it provides a minimum downtime (like 5 minutes) and data loss in case any data center (Geo) or server failure.
Clustering needs extra hardware/server and it’s more expensive.
Database mirroring
Database mirroring introduced in 2005 onwards. Database Mirroring maintain an exact copy of a database on a different server. It has automatic fail over option and mainly helps to increase the database availability too.
Database mirroring only works FULL recovery model.
This needs two instances.
Mirror database always in restoring state.
http://msdn.microsoft.com/en-us/library/ms151196%28v=sql.90%29.aspx
http://blogs.technet.com/b/wbaer/archive/2008/04/19/high-availability-and-disaster-recovery-with-microsoft-sql-server-2005-database-mirroring-and-microsoft-sql-server-2005-log-shipping-for-microsoft-sharepoint-products-and-technologies.aspx
http://www.slideshare.net/rajib_kundu/disaster-recovery-in-sql-server
HADR Considerations
Need to Understand the business motivations and regulatory requirements that are driving the customer's HA/DR requirements. Understand how your customer categorizes the workload from an HA/DR perspective. There is likely to be an alignment between the needs
and categorization.
Check for both the recovery time objective (RTO) and the recovery point objective (RPO) for different workload categories, for both a failure within a data center (local high availability) and a total data center failure (disaster recovery). While RPO and
RTO vary for different workloads because of business, cost, or technological considerations, customers may prefer a single technical solution for ease in operations. However, a single technical solution may require trade-offs that need to be discussed with
customers so that their expectations are set appropriately.
Check and understand if there is an organizational preference for a particular HA/DR technology. Customers may have a preference because of previous experiences, established operational procedures, or simply the desire for uniformity across databases from
different vendors. Understand the motives behind a preference: A customers' preference for HA/DR may not be because of the functions and features of the HA/DR technology. For example, a customer may decide to adopt a third-party solution for DR to maintain
a single operational procedure. For this reason, using HA/DR technology provided by a SAN vendor (such as EMC SRDF) is a popular approach.
To design and adopt an HA/DR solution it is also important to understand the implications of applying maintenance to both hardware and software (including Windows security patching). Database mirroring is often adopted to minimize the service disruption
to achieve this objective.
HADR Options :
Failover clustering for HA and database mirroring for DR.
Synchronous database mirroring for HA/DR and log shipping for additional DR.
Geo-cluster for HA/DR and log shipping for additional DR.
Failover clustering for HA and storage area network (SAN)-based replication for DR.
Peer-to-peer replication for HA and DR (and reporting).
Backup & Restore ( DR)
keep your server DB backups in network location ( DR)
Always keep your sql server 2005 upto date, in case if you are not getting any official support from MS then you have to take care of any critical issues and more..
Raju Rasagounder Sr MSSQL DBA

"Disaster Recovery with Messaging server"

Suggest a better solution for load balancing on Netscape Messaging Server. Also for disaster recovery - in case one server goes down.

Better solution than what? Nothing? Use a cluster for the mail store. Use more than a single server for the other components and use a load balancer as the front end for those services.

DR (Disaster Recovery) server installation.

Dear Experts,
We have one server for BI PRD. We are not using it at the moment. We wish
to carry out DR (Disaster Recovery) trial on this server. Regarding thiswe have following queries :
1. Do we require separate SAP License key for this server when setup forDR (already SAP license key exists for it as BI server)
2. We will re-install BI on the same server after our DR test so whetherwe need to regenerate License key for BI or not?
3. We have two R/3 PRD servers in HACMP mode in SAN. Can we take the
backup of R/3 PRD and restore it on DR Trial Server? If yes, whether we
will face any problem for existing PRD server?
4. Whether Existing PRD and Trial DR Server will clash or hang since
these will be in the same local network and SAN
Please advise.
Regards,
Kailas Padwale.
BASIS Team.

Hi,
As per your query you have not mentiones here what is your opreting system and whcih SAP verson you are using. If any one need related to implimentaion then we keep in mind to os,sap version,database etc.
Your Question: If you want to DR of PRD then you have to get my answer.
1. Do we require separate SAP License key for this server when setup forDR (already SAP license key exists for it as BI server)
ANS= Yes you can generated from SAP Site becasue now this is BI and you want to DR but for this you have not paid any thing to SAP its free.
2. We will re-install BI on the same server after our DR test so whetherwe need to regenerate License key for BI or not?
ANS=NO becasue you have to use only PRD copy you can not run BI here otherwise how can you say this is DR server. DR Server means you can copy in existing running server, in case you running server get down then within short period you can provide the solution. After rectificaton actual server you will shift in old one.
3. We have two R/3 PRD servers in HACMP mode in SAN. Can we take the
backup of R/3 PRD and restore it on DR Trial Server? If yes, whether we
will face any problem for existing PRD server?
ANS=You can restore backup but you have to take backup only one PRD server and restore it in DR. Just chang your IP Address and rest can be same. You will not face any issue on this if you run in the same network. I will recmond if you use database in DR server itself then good for your running system will not impect.
4. Whether Existing PRD and Trial DR Server will clash or hang since
these will be in the same local network and SAN
ANS= No because you will use seprate IP address and data will be in DR server not in SAN.
In case you need more help, pls get in touch.
Anil

Disaster Recovery - HPSU8

We currently are running HPSU 8.3 and have been tasked with developing a good disaster recovery plan should the server fail. We have purchased a new server that's identical to the production server. Does Hyperion have documentation/recomnedations for restoring HPSU 8 to another server. We are backing up the entire production server nightly. If anyone can point me in the right direction for this I'd appreciate it. I called support, but they just directed me to e-support and told me I should be able to find documentation online but I have been unable to locate this information so i was hoping someone may be able to assist me.<BR><BR>Thanks,<BR>Bob Cook<BR>REZ1

Exactly, the attached doc regarding HANA standby means for high availibility not disaster recovery. if the entire data center goes belly up, there will be no shared disk available. I talked with a few folks from SAP BI area. It seems to me that at this point the best way to handle HANA disaster recovery is manual:
1. Back up HANA to local backup system (storage or tapes) at regular interval (e.g. nightly) and ship (ftp/ship etc.) the back up to DR site.
2. Back up HANA log more frequently (e.g. hourly) and ship the log backups to DR site.
In the event of a DR, the backups shipped to the DR site will be used to restore a HANA DR system. Of course, nomal DR practice still applies, such as, use of virtual names everywhere, change DNS entries, etc. to make the resumption of DR processing at DR site seamless ...
This is very similar to the very early days of RDBMS DR practice. I expect SAP will make the HANA DR less painful by implementing something similar to modern days RDBMS DR solution (e.g. database mirroring, standby db, replication, etc.) in the future.

Calling an Unix command on Remote sun Server in a Java Code

Hello All
I have an Java Application which is run on windows server (I)
I have another Sun Server (II)
I want to call an unix command on server(II) from java application which is on server(I)
I am using Samba Server in order to share files between Windows Server and Unix Server
Can I use samba in order to call command
or is there any way to open an telnet session within java application
I will be grateful if you give me some suggestion on this issue
Regards
BEKIR BALCIK
Argela Technologies ...

Can I use samba in order to call commandYes, smaba supports "magic" files that cause a program to be executed when they are accessed. Note, this does not provide for arguments but you can put these in a file which you command reads.
or is there any way to open an telnet session within java applicationYes. just use a Socket connection.

Datafiles Mismatch in production & disaster recovery server

Datafiles Mismatch in production & disaster recovery server though everything in sync
We performed all the necessary prerequisites & processes related to DRS switchover successfully also our DRS server is constantly updated through logs application in mount state whan we opened DRS database in mount state it opened successfully however when we issued command
Recover database
It dumped with foll errors:
ora-01122 database file 162 failed verification check
ora-01110 data file 162 </oracle/R3P/sapdata7/r3p*****.data>
ora-01251 unknown file header version read for file 162
as I do not remember the exact name now
However upon comparing the same file at production(which was now in shutdown state) the file sizes were mismatching so we went ahead to copy the datafile from production to DRS in database shutdown state at DRS through RCP utitlity of AIX 5.3 since our Operating system is AIX 5.3
Though this remote copy was success
we again started database in mount state & issued command
Recover database
But still it dump the same error but now for another datafile in DRS
I mean I would appreciate if somebody could point out that despite our DRS was constantly being updated through our Production in terms of continuous log application before this activity logs were sync in both the systems also origlos,mirrorlogs & controlfiles were pulled from production system as it is infact the whole structure was as replica of production system , then why did datafile sizes mismatch??
Details
SAP version :- 4.7
WAS :- 620
Database :- Oracle 9.2
Operating system :- AIX 5.3

I am in a process of DR Planning.
My present setup :
O/S : HP-UX 11.31
SAP ECC 6
Oracle 10g Database.
I know about dataguard and i have implemnted same on our other application but not for SAP.
I have ame doubts and I request you to please guide me for the same.
1. SAP License key -- it required hardware key. So will i have to generate license key another hardware key i.e. for machine where standby database.
2. Database on standby site will be in manage recovery mode. Will I have to make any changes or any other file realted to SAP on standby host ? (some i know such as I upgrade SAP kernal, same i have to upgrade at standby host)
Will you give me some link related to document for DR

Oracle Application Server 10g Disaster Recovery

Hi all,
This is regarding Disaster Recovery approach for Oracle Application Server 10g. There are two environments Active (DC-PROD) and Stand-By (DR-PROD). Each environment have 2 nodes where OAS Instances are installed in both nodes and each environment has a Virtual Hostname (Virtual IP) used. The 2 nodes hostnames of DC-PROD environment differs from 2 nodes of the other environment DR-PROD.
However the Virtual Hostname is same between two environments.
The env DC-PROD is setup already and is working fine. Now we have to setup DR-PROD env for disaster Recovery purpose. DR-PROD is also setup independently from DC-PROD. Each env has seperate DB servers in RAC mode. We are using EMC SRDF replication technology to do DB replication between DC-PROD and DR-PROD environments.
There is no disk replication between Oracle Application Servers of two environments DC-PROD and DR-PROD. DC-PROD is NOT setup using Oracle AS Guard for some reasons and we are in a situation that DC-PROD should not be touched at all.
So if the Database is replicated from DC-PROD to DR-PROD servers using EMC SRDF replication technology, while bring up OAS Infra services in DR-PROD node, OC4J is failing to come up. After some workarounds, OC4J cameup but we are unable to login to OIDDAS console.
ssoServer.log shows the following: -
Mon May 30 11:01:23 IST 2011 [DEBUG] AJPRequestHandler-ApplicationServerThread-8 DatabaseConfigReadergetting partner apps configs: select site_id, site_token, site_name, home_url, success_url, logout_url, encryption_key, encryption_mask_pre, encryption_mask_post, start_date, end_date, administrator_id, administrator_info from wwsso_papp_configuration_inf_t where site_id = '06B9F06C'
Mon May 30 11:01:23 IST 2011 [DEBUG] AJPRequestHandler-ApplicationServerThread-8 Partner Site ID: 06B9F06C
Mon May 30 11:01:23 IST 2011 [DEBUG] AJPRequestHandler-ApplicationServerThread-8 exception before getAuthLevel
oracle.security.sso.server.conf.ConfigurationException: Partner application configuration not found:06B9F06C
at oracle.security.sso.server.conf.DatabaseConfigReader.getPartnerConfiguration(DatabaseConfigReader.java:143)
Please provide us the inputs to achieve Disaster Recovery for OAS 10g without using Oracle AS Guard.
This is very urgent and your inputs are greatly appreciated.
Regards,
Mahendra.

Another point to add for the environment details. Both DC-PROD and DR-PROD environments does not have connectivity at all. Only the DB connectivity is there for doing DB replication.
EMC SRDF replication technology is a block by block replication i.e., a disk replication. Hope these details are sufficient for environment specifications.

Lync Server 2013 - Disaster Recovery Plan

Hi All,
I am looking for a document which has the information about the different scenarios regarding High Availability and Disaster Recovery and things to perform during that situation
Eg.
If a front end Server is failed. then the load will be moved to another front end server in the pool
similarly back end Server fails, then the load gets moves back to SQL mirroring server by SQL Witness server
Anil Kumar (MCITP)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hi Anil
A similar thread for your reference which might help you
https://social.technet.microsoft.com/Forums/lync/en-US/67e5dfa3-92ee-4732-ab1a-48b52f028650/lync-2013-site-resiliency?forum=lyncdeploy
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Welcome to the SQL Server Disaster Recovery and Availability Forum

(Edited 8/14/2009 to correct links - Paul)
Hello everyone and welcome to the SQL Server Disaster Recovery and Availability forum. The goal of this Forum is to offer a gathering place for SQL Server users to discuss:
Using backup and restore
Using DBCC, including interpreting output from CHECKDB and related commands
Diagnosing and recovering from hardware issues
Planning/executing a disaster recovery and/or high-availability strategy, including choosing technologies to use
The forum will have Microsoft experts in all these areas and so we should be able to answer any question. Hopefully everyone on the forum will contribute not only questions, but opinions and answers as well. I’m looking forward to seeing this becoming a vibrant forum.
This post has information to help you understand what questions to post here, and where to post questions about other technologies as well as some tips to help you find answers to your questions more quickly and how to ask a good question. See you in the group!
Paul Randal
Lead Program Manager, SQL Storage Engine and SQL Express
Be a good citizen of the Forum
When an answer resolves your problem, please mark the thread as Answered. This makes it easier for others to find the solution to this problem when they search for it later. If you find a post particularly helpful, click the link indicating that it was helpful
What to post in this forum
It seems obvious, but this forum is for discussion and questions around disaster recovery and availability using SQL Server. When you want to discuss something that is specific to those areas, this is the place to be. There are several other forums related to specific technologies you may be interested in, so if your question falls into one of these areas where there is a better batch of experts to answer your question, we’ll just move your post to that Forum so those experts can answer. Any alerts you set up will move with the post, so you’ll still get notification. Here are a few of the other forums that you might find interesting:
SQL Server Setup & Upgrade – This is where to ask all your setup and upgrade related questions. (http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/threads)
Database Mirroring – This is the best place to ask Database Mirroring how-to questions. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabasemirroring/threads)
SQL Server Replication – If you’ve already decided to use Replication, check out this forum. (http://social.msdn.microsoft.com/Forums/en-US/sqlreplication/threads)
SQL Server Database Engine – Great forum for general information about engine issues such as performance, FTS, etc. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabaseengine/threads)
How to find your answer faster
There is a wealth of information already available to help you answer your questions. Finding an answer via a few quick searches is much quicker than posting a question and waiting for an answer. Here are some great places to start your research:
SQL Server 2005 Books Onlinne
Search it online at http://msdn2.microsoft.com
Download the full version of the BOL from here
Microsoft Support Knowledge Base:
Search it online at http://support.microsoft.com
Search the SQL Storage Engine PM Team Blog:
The blog is located at https://blogs.msdn.com/sqlserverstorageengine/default.aspx
Search other SQL Forums and Web Sites:
MSN Search: http://www.bing.com/
Or use your favorite search engine
How to ask a good question
Make sure to give all the pertinent information that people will need to answer your question. Questions like “I got an IO error, any ideas?” or “What’s the best technology for me to use?” will likely go unanswered, or at best just result in a request for more information. Here are some ideas of what to include:
For the “I got an IO error, any ideas?” scenario:
The exact error message. (The SQL Errorlog and Windows Event Logs can be a rich source of information. See the section on error logs below.)
What were you doing when you got the error message?
When did this start happening?
Any troubleshooting you’ve already done. (e.g. “I’ve already checked all the firmware and it’s up-to-date” or "I've run SQLIOStress and everything looks OK" or "I ran DBCC CHECKDB and the output is <blah>")
Any unusual occurrences before the error occurred (e.g. someone tripped the power switch, a disk in a RAID5 array died)
If relevant, the output from ‘DBCC CHECKDB (yourdbname) WITH ALL_ERRORMSGS, NO_INFOMSGS’
The SQL Server version and service pack level
For the “What’s the best technology for me to use?” scenario:
What exactly are you trying to do? Enable local hardware redundancy? Geo-clustering? Instance-level failover? Minimize downtime during recovery from IO errors with a single-system?
What are the SLAs (Service Level Agreements) you must meet? (e.g. an uptime percentage requirement, a minimum data-loss in the event of a disaster requirement, a maximum downtime in the event of a disaster requirement)
What hardware restrictions do you have? (e.g. “I’m limited to a single system” or “I have several worldwide mirror sites but the size of the pipe between them is limited to X Mbps”)
What kind of workload does you application have? (or is it a mixture of applications consolidated on a single server, each with different SLAs) How much transaction log volume is generated?
What kind of regular maintenance does your workload demand that you perform (e.g. “the update pattern of my main table is such that fragmentation increases in the clustered index, slowing down the most common queries so there’s a need to perform some fragmentation removal regularly”)
Finding the Logs
You will often find more information about an error by looking in the Error and Event logs. There are two sets of logs that are interesting:
SQL Error Log: default location: C:\Program Files\Microsoft SQL Server\MSSQL.#\MSSQL\LOG (Note: The # changes depending on the ID number for the installed Instance. This is 1 for the first installation of SQL Server, but if you have mulitple instances, you will need to determine the ID number you’re working with. See the BOL for more information about Instance ID numbers.)
Windows Event Log: Go to the Event Viewer in the Administrative Tools section of the Start Menu. The System event log will show details of IO subsystem problems. The Application event log will show details of SQL Server problems.

hi,I have a question on sql database high availability. I have tried using database mirroring, where I am using sql standard edition, in this database mirroring of synchronous mode is the only option available, and it is giving problem, like sql time out errors on my applicatons since i had put in the database mirroring, as asynchronous is only available on enterprise version, is there any suggestions on this. thanks ---vijay

Sun Java Web Proxy Server Routing to another Proxy Server

hello every body
i have installed Sun java web proxy server and we are get internet services from anotyher proxy server.
how route SOCKS (Ports) to another proxy server)
I mean 8080 web browsing is ok but my socks applicaiton like outlook is not working. how to Route my Sun Java Web proxy Server Socks Server to another Proxy Server.
Please reply
best regards
Aamir Mughal
[email protected]

Dear ahmad@bzu,
I suspect that your download is corrupted. Check the file size ( for me it shows up 89,328KB(and the installation went smooth). So a possible solution should be to download again and try the installation.

Disaster Recovery on another Sun Server

Similar Messages

Maybe you are looking for