Disk Statistics Help
Hi,
I 'm trying to get the following information related to disk statistics:
%Busy[]
Blks/Sec[]
BlkReads/Sec[]
BlkWrites/Sec[]
I/Os/Sec[]
Rds/Sec[]
Wrs/Sec[]
AvgServ[]
AvgWait[]
AvgQlen[]
OldQlen[]
Degradation/Sec[]
I need to get this information from /dev/kmem/ without using kstat. But I'm not sure which structure holds these information. I would really appreciate any guidance regarding these statistics.
Thanks.
Regards,
Shine
man kstat(3K) should help...
Ilya.
Similar Messages
-
i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk
It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver. -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Option key can't function to access start up manager, so i can't choose startup disk. please help me
option key can't function to access start up manager, so i can't choose startup disk. please help me
If you have Apple Care, call them and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
-
I made a movie in iMovie and want to make copies. I lost the iMovie file, I just need to know how to copy a disk. HELP!
Not sure if you really mean disk (HD) or disc (CD/DVD). Check out this YouTube video
-
I tried looking around in the forums but only found one posting on my topic.
Does anyone, have any clue why I get the message; Disk Copy helper unexpectedly quit. Any clues where to begin to fix it? I've tried re-installing the Mac OS X system that came with the darn thing and that did nothing.
Ever since I down loaded iTunes update this computer has gone down hill. I personally believe they do this on purpose!
Please any leads or help is greatly apprecciated.
eMac Mac OS X (10.2.x)Just try a search for "Disk Copy helper unexpectedly quit" and work your way around the links you get. A few I found include...
http://www.macosx.com/content/faq.php/q2528/Disc-Copy-Helper.html
But this one directly from Apple talks about your problem...
http://docs.info.apple.com/article.html?artnum=25818
Patrick -
I cannot transfer my file from macbook to external hard disk, please help me
i cannot transfer my file from macbook to external hard disk, please help me
wrong forum, but also need more information. Probably need to reformat (erase) the drive, tell people what disk drive it is, type of interface you are using, the model MBP you own.
-
I've just noticed some strange behavior with a process called "disk images helper." A little while ago, I saw that my CPU usage had peaked, even though I wasn't using any processor-intensive apps. Upon checking Activity Monitor, I saw that the culprit was the "disk images helper," which was using a whopping 99% of my CPU. I'm not sure how this happened, but I was wondering if anyone else has noticed this behavior and if so, what might be the cause behind it.
Thanks.Also had this on 10.4.11. I had spotted what I took to be an incomplete download - accidentally tried to mount it and it seems to have happened since then. Killing the process seems to do the job.
-
I have an ipod shuffle and when I connect it to the USB port, it loads up fine on itunes. Then as the music is synching, I get an error message that comes up reading "Windows-No Disk Exception Processing Message (then a whole bunch of numbers and letters). There are three options to cancel, try again or continue. Clicking any of the options does not help and only causes the error message to return.
I have tried the r's, and tried restoring the shuffle twice now. While the restore did allow for the music to start synching (whereas at first it wouldn't even let that happen), it eventually resulted in the same error message.
This is driving me crazy and making me so frustrated. When I first used it probably a month ago, it uploaded music fine. I don't understand where this sudden problem has come from. I read somewhere there could be software on my computer scanning the device which might be causing a problem, but I pulled up my running programs and there's nothing open other than a few programs, none of which are virus scanning software.
Help would be greatly appreciated since right now this product is pretty much useless. So much for apple products being so "trouble free."I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input. -
Western Digital drive not showing up in disk utility--Help please.
Hello all. This is my first post. I am having trouble with my WD 500GB external hard drive. It is not showing up in disk utility when connected either via the firewire or USB ports. I purchased the drive about 8months ago, brought it home and set it up as my Time Machine backup drive. It worked great for several months, until it got full. Then it stopped showing up on the desktop for no apparent reason. I discovered through reading support documents on the Apple web site that when I set the drive up initially I should have changed the partitioning protocol from master boot record to GUID, but I did not. I followed the apple web site instructions for making the change expos facto, but was instructed to press buttons that were "grayed out". As such, I couldn't do it. Perhaps foolishly, I thought that I would just start all over by reinitializing it, formatting it correctly (with my new found knowledge) and then do the time machine backup fresh. However, the drive no longer shows up in disk utility no matter how or in what order I connect it. When the drive is connected by firewire there is evidence of some recognition of the drive in system profiler, but it is listed as "External HDD Buttons and Lights". There is also evidence of the My Book showing up at a minimal level (eg. the firmware revision and a few other details are listed). On the front of the drive is a ring of blue lights that progress in a clockwise direction as soon as a connection is made via either firewire or USB. Before that it is solid blue. I have read through all the info that I can find on this site, and all the suggestions require the drive being recognized in disk utility. Without that, I am stuck. I know this must be a solvable problem, because the drive just a bucket of parts before it was manufactured. I just don't know enough to solve the problem or even know what qeustion to ask. I would really appreciate some help. Thanks in advance, and sorry for the long post.
If you can't boot from an OSX DVD, it sounds bad. Yet I think you said you were running Disk Utility from the DVD?
I got an external Firewire drive enclosure for 2.5 inch IDE drives from Other World Computing (OWC)
http://eshop.macsales.com/item/Other%20World%20Computing/MOTGFW400/ but similar items are available from many vendors like Newegg. About $60 for the basic model. More money can buy additional interfaces on the enclosure like FW800 and USB2; an AC adapter instead of letting the firewire bus power the drive (usually OK). -
2 ipods on same computer not enough place in local disk c help
Hi,
My brother and i have 2 ipods and i created 2 differents accounts on my computer but when i tried to copy my library's music to my bro; my computer says error? And i only have half of a gig on local disk c.
Why doesn't my library can't export my library to his? Help pleaseI'm not sure you can "share" iTunes libraries. Most likely due to copyright laws.
Perhaps someone else knows more. -
Can't boot G5 even from OS install disk. Help?
I've trolled the message boards 25 pages deep and searched all the "Can't boot my G5" threads and still haven't found anyone describing what my machine is doing so thought I'd start a new thread in the hopes someone can help me out.
Ok I have a G5 dual processor machine. (Power PC chip, not Intel) Things went bad when I tried to do an Archive and Install of Leopard (OS 10.5) The install looked as normal until I got to one minute left on the install. At that point the install never progressed. I thought maybe it was doing some behind the scenes processing and decided to leave it over night. The next day my machine was still hung on that One minute left. So obviously it was a failure. Of course now the problem is I have an install that never completed of the OS and so that partition is, I assume, unbootable. Wiped away the Tiger OS and did a 99% install of Leopard. So I had to shut down by holding the power button.
I think to myself, "No worries I can just boot from my 2nd partition holding down the Option key to select it on the boot up screen". I always keep a partition with an OS on it for times like these. So I reboot, hold option key, select my other partition, things look OK. I get the grey screen with the Apple logo and I get the wheel animation turning. (Not beachball of death but the typical circular, almost sun ray configuration thing) At this point, usually the screen will go black for a moment before the desktop loads. However, in my case once the screen goes black after the load screen, it stays black. Now let me say the monitor does NOT turn off. There is a definite difference when I manually turn the monitor off. When off it's truly black. But this is like a power on black, not true black. (If you need me to explain this better feel free to ask me to clarify)
So the untouched, pristine Tiger partition boot is a No Go. I figured I'd then give up on trying to put Leopard on my desktop machine (I use it on my laptop) and reinstall the original OS and system software from the system disk that came with my G5. I boot machine holding down eject button, place the disk in, close the drive door and shut down again by holding power button. Reboot holding C key and the same routine happens with booting from the disk. Gray Apple logo screen, sun ray circle moving, screen goes black on the attempted transition to desktop .. but stays black. I also tried booting with my Disk Warrior disk to no avail. Same thing happens. (Also tried booting from disks by selecting them manually from booting with Option key down) At first I wondered if it was a monitor issue. That maybe my desktop was up but there was an issue with the signal being passed to the monitor on the resolution jump. Thought perhaps hitting the Eject key on the keyboard when I had attempted to boot from the partition (not from disk on this test) would tell me if it was a monitor issue. If it was a monitor issue, the disk tray should open. But alas, no.
So since I cannot boot normally from any partition or disk I decided to boot into single-user mode.
I did the fsck -fy thing and it told me everything was ok. I had also previously installed applejack and I ran that and short of correcting a few permissions and dumping some unneeded caches it came back with a system OK.
At my wits end I booted into target disk mode and ran Disk Warrior on both the original half installed OS partition and the back up emergency boot up partition from my laptop. Again, everything OK. Hoped against hope that I could actually install an OS onto my G5 from my laptop but I was only given the option of being able to do it from my laptop with the Leopard disk and it would only allow me to do it if I used Disk Utility to completely format that drive first. No, thanks.
Re-attempt to boot G5. Failure. So now I turn to hardware. Disconnected everything beside the keyboard and mouse. Try again. Fail. Pulled a couple sticks of Crucial memory out of the machine and left the stock RAM. No dice. Pressed the small power unit reset button under the RAM slots. No change. Zapped the PRAM. Still nothing. Try to boot in Safe mode holding down shift key. Doesn't work.
It seems to me if I can't even get the machine to boot from the Install disk that there is something going on that is much more major than software issues.
Bad motherboard? Any ideas? Because I'm all out of ideas.Brother, Sound74, I thought I was the only one pulling the hair out of my chest one by one the past two days. Your situation is very similar to mine, and I'm just as clueless as you are. I started getting kernel panic screens, then nothing on boot, until finally I brought it to the local genius bar. They ran all the usual software/hardware tests, updated Tiger to 10.4.11, recommended I buy Leopard and do an erase-install. My computer, of course, was working absolutely fine by this point. I bought Leopard, came home, backed everything up, then tried to install the new OS. Like in your case, it just up and quit half-way through. Screen went black and a "No DVI Signal" message came on my display (it does this when I turn it on without first turning on the computer).
So I thought, well, maybe it takes a really long time to erase-install, and the monitor is just waiting for things to kick back in. I've always upgrade-installed before, so I couldn't tell if this was normal or not. But about half an hour later, my fans kicked in so fast I thought I had a P-51 Mustang taking off in my studio. I waited a bit more and finally force-shut-down my system. Not knowing what to expect, I nervously tried to re-boot.
Nothing. Zip. I can't safe boot, I can't boot from the installer disc, etc. The only thing I can do is the option-key thing whereby you choose the startup disc. And of course, it only gives the Leopard install disc as an option, because now the entire HD has been erased! But when I choose the Leopard disc, of course it doesn't work.
So I have a nice $3000 paperweight sitting in my studio. I guess I'll have to bring it back to the Mac store, where if it costs more than $300 to fix, I'm going to say screw it and put that dough toward a new iMac.
Sorry I couldn't provide any helpful info, but I just wanted you to know you're not alone in suffering the slings and arrows of outrageous technology.
Keep me posted on any solutions you discover, and I'll do the same.
Noochy1
PS My applecare expired a month ago! AAAAARRRRGGGHHHH!!! **** Murphy and his stupid laws. -
Cant write/edit data on my external hard disk! Help please!~~
Okay guys, currently, i'm using Tiger version 10.4.11. My problem is that i cant edit data or write data to any external hard disks, like the maxtor One Touch and so on. Only thing i can do is to extract the data from the disks. I have tried to write on multiple hard disks but in all my attempts i have failed. i've tried to edit my network settings, but no results.
So, i seek help from anyone out here!Hello, yea.. thanks man =)
Basically, its a shared hard disk between my macbook and a windows PC. So i kinda use the PC to write all my backups and data on the hard disk.
I have quite a few hard disk and they all have the same issue. It says 'The item 'file x'cannot be moved because 'my hard disk' cannot be modified.'I've used the software provided from the hard disk manufacturer, Maxtor/Seagate, to reformat the brand new portable hard disk which i bought yesterday.
Its connected via USB, same as all the other ones i have.
eh. the get info for it says
Kind: Volume
Created: --
Modified: Thursday, 23 Aprl 2009 3:24AM
Format: Windows NT Filesystem
Capacity: 232.88 GB
Available: 232.57 GB
Ownerships & Permissions: You can only read.
erm... its a portable drive which i carry around, so i guess its not a network drive? and how doi determine the network settings? Sorry man.. not really good at these =x -
Disk utility unable to repare hard disk, need help !!
I have Dual 2.7 Ghz PowerPC G5
I have 2 hard disks one of which is used for the system (10.4.6). recently I run a disk utility verification on Macintosh HD (primary for MAC system disk).It found some errors ,but when I tried to repaire them I got this:
Error: The underlying task reported failure on exit
I tried to safe boot, but the computer just won't start. It starts for a few minutes ( I suppose it checking the system) and then restart again ( and if you hold the magic button fro safe boot it will restart and restart and restart).
I tried to write some unix command ( I can remember which ones- but there are for the sort of deep repairing, but they do nothing at all.
Please some one help me to repare my disk ( may be suggest some third party program or something else.)
Thanks in advanced.Journaling is explained here
http://docs.info.apple.com/article.html?artnum=107249
It aids system recovery but the operation is automatic and not visible to the user.
Have you have checked the files suggested in The hatter's link?
Sorry, losing the thread a bit between all these different posts and problems. I can only suggest going back to basics:
Back-up your data if possible - if you haven't already.
Reset the PMU
Disconnect all non-essential peripherals leaving just display, keyboard and mouse; unplug from the mains and leave for at least 30 mins; re-connect mains plug to G5(to earth the casing), then reset the PMU
http://macosg.com/group/viewtopic.php?t=5819&highlight=resetting+pmu
Note static precautions and the warning to press the button once only.
Then boot from the system DVD and run the Apple Hardware Test.
Then, while booted from the system DVD, run Disk Utility on your internal boot drive and try to repair it. Some further notes here
http://docs.info.apple.com/article.html?artnum=302672
If it still finds unrepairable errors you will probably have to Erase & Install
http://docs.info.apple.com/article.html?artnum=301270
Then use the combo updater
http://www.apple.com/support/downloads/macosx1046comboforppc.html
Re-install applications and restore user data.
Apologies if this is overkill - or if there are any omissions - have to go to bed now - no, have breakfast - no, wait a minute, what day is it? - what's the Prime Minister's name...?
Anyway, Good Luck. Let us know how you get on. -
Macbook Pro not booting after update. ''Disk Utility can't repair disk''. Help needed!
I have recently updated my macbook pro as I had some pending software updates. I left it to do the job over night and the next day I noticed it was not letting me sign in to my account session as usual.
I restarted the computer and ever since then when I boot it, it just shows the apple grey screen with a bar that loads to about a 3rd and then it turns off again. I have contacted apple but they were unable to help me with this.
So far I have tried to:
1. Re-install OS X 10.8 - but it says the disk is locked or OS X cannot be installed on Recovery HD.
2. Verify and Repair the disk and I errors but it cannot fix them. Some are:
'invalid leaf count''
''missing thread record''
''incorrect number of file hard links''
''overlapped extent allocation''
and it finally says ''the volume Macintosh HD cannot be repaired'' Error: ''Disk Utility can't repair this disk.. disk, and restore your backed up files.
I would like to know a way to back up my files so that i can completely restore the disk without any data loss as I havent backed up for a while!
If anyone has any solution to this issue it would be much appreciated!I just ran the Disk Utility, and cannot very disk. It gives me an error message;
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
and when I run the repair, this is the message:
The volume GERRARD could not be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Prior to running Disk Utility, I have already tried DiskWarrior, and could not repair my disk. Anyway I can fix this problem??? Formatting the disk would be my last option (though I am unsure if it will fix the problem). Any advise would be greatly appreciated. Meanwhile, I will continue to back up my file, and delete unused data and try to run it again.
Thank you all very much for any input.
Cheers,
Matt
Maybe you are looking for
-
FPM : how to subscribe buttons event for Dialog box
Hi All, I am calling a FPM configuration as popup, i have used standard button CLOSE. Now I wanted to assigned my own action to it. How can i achieve this ? As in webdynpro we can use SUBSCRIBE_TO_BUTTON_EVENT, similarly which method i can use in FP
-
Subtract a workpath selection from a larger workpath
my job prohibits me from sharing images so if needed i can make a quick sketch if i can't get my question across clear enough. here is what i have. the image is a stack of objects and i have made a work path of all the objects (one large selection la
-
Ever since the last update, I'm having problem accessing my e-mail account. I keep getting an annoying bar at the top of the screen "Firebox prevented this page from automatically redirecting to another page." I have to keep hitting the allow button,
-
Break .mov file into multiple jpeg files
Hello all, I've already put together a program that jams multiple jpegs into a .mov file, but is it possible to do the same thing in reverse? I have a .mov file captured from a camera. I need to decompose it into a ton of jpegs. the purpose is that I
-
'Runtime Operation Error' on BPM/Workspace
Hi all, When I'm logging into the BPM 11 G Work space I'm getting a error indicating *" Runtime Operation Error''* . This error occurs only for my login. Other users not getting this and their logins are working properly... What can be the issue? Tha