Display cost center field under item level when creating sales order

Hi dear experts,
during the sales order creation(tcode VA01), is it possible to display the cost center field in the tab account assignment under item level??
currently we are using ECC6,in the tab account assignment, the cost center field was actually already defined in the screen by the system...i used to try to 'activate' the cost center field VBAP-KOSTL in the user exit MV45AFZZ, but the cost center still not shown.
I know that there is a config to the sales doc type can be used to open the cost center at header level, how about item level?
thanks and best rgds
Mu

Hi,
The Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason.
regards,
Siddharth.

Similar Messages

Make Net Value Field at item level Editable in Sales Order

Hi
All pricing in our system are manual .
So the client wants to change the Net Value Field in Credit and Debit Memo Request to be Editable ( Currently it is not modifiable)
Plz suggest how to g about it.
Do i need to use Userexit_ Field_ Modification, if yes how , The field VBAP-NETWR.
REgards
Rohit

Hi Yadav
Changing Net Value will effect the updation of various tables ...so u r right not the correct approach .
Can i put condition type and its value in Credit Request Memo and its value aditable same as in screen for Sales Order .if yes how , changing screen sequence group in credit memo request is creating problems
Regards
Rohit

Billing date at line item level in a sales order

HI!
Can anyone let me know the significance of billing date being present at the line item level in a sales order?
And why does it get changed as per the Requested delivery date if the Prop. Pricing date in the maintanenece of sales doc type is set as 'A'?
Can it be different for different line items?

Hello Asha,
Can anyone let me know the significance of billing date being
present at the line item level in a sales order ???
The comprehensive information is available at SAP technical help(F1) for the "BILLING DATE" field at Sales Order line item level...Before raising these type of questions, i would urge to conduct initiate analysis and then post at SDN forum if you are unable to find out answers...For your quick reference, i have extracted the same description for Billing date from SAP techincal help (F1) and pasted below.
Billing date for billing index and printout
+The date on which the billing is processed and booked for
accounting purposes.+
Use
+You can use the billing date as one of the selection criteria
when you process billing documents collectively.+
Procedure
+If invoice dates are defined for the customer, the system proposes
the billing date from the invoice date calendar. If no invoice dates are
agreed, then the actual goods issue date is formed on the basis of
delivery related billing. In order related billing, the billing date of the
order forms the basis of the billing date.+
+If you are billing services, the system proposes the date of services
rendered. You can change the date manually in the sales document.+
+If you are using a billing plan to bill a project, the system can propose
billing dates for the billing plan on the basis of planned or actual dates
in the corresponding milestone.+
+In a billing plan for a maintenance or rental contract, you can specify rules
by which the system determines billing dates on the basis of other dates in the contract.+
Regards,
Sarthak

How to change the product category on the item level of a Sales order

1) For each product there are Basic Product Hierarchy and Sales Product
Hierarchy.
2) when creating sales order, system gets the Sales Product Hierarchy
on the Item level with the default logic.
So our question is: how to change the logic to let system get the Basic
Product Hierarchy on the Item Level.

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

Shipping point at Item Level of a Sales Order

Dear Gurus,
Can anyone explain to me step by step how can I copy:
1- The shipping point
2- The route
At Item level of a Sales Order in VA01
Many thanks
Regards
Chris

Dear Gurus,
Can anyone explain to me step by step how can I copy:
1- The shipping point
2- The route
At Item level of a Sales Order in VA01
Many thanks
Regards
Chris
Hi Chris,
Answer to your Question,
Please understand that Shipping Point and Route will be automatically determined based on the configuration settings we make. However we can even override the values manually in sales order screen (Va01 / Va02). See below the config settings to be made for Shipping point and Route:
1. Shipping Point.
Based on the combination of below three parameters, Shipping Point will automatically populate while creating a Sale order. (VA01)
          Shipping Condition
          Loading Group
          Delivering Plant
SPRO- Logistics Exceution - Shipping - Basic Shipping Functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points
2. Route
Based on the following Four factors from configuration:
Departure Zone of Shipping Point
Destination Zone of Customer (Shipto)
Shipping Condition from Customer master.
Transportation Group from Material Master.
Hope this Solves your Issue.
Regards,
VBASHA

To Blank out system default requested delivery date when create Sales Order

Hi Experts,
I am facing a problem when create Sales Order doc copy with reference to a contract.
The create with reference screen under the Contract tab, SAP default with current date as the Requested delivery date.
Is there any way to blank out this default as I need to use the requested delivery data in the contract doc ?
Many Thanks.
Regards,
Xavier

Hi,
Try this--
While defining the Contract sales docment type in VOV8, uncheck the proposed delivery date field in the tab Requested delivery date/ reqested pricing date/reqested prchase order date
I will not propose the system date and leaves the field blank
you can enter the required delivery date.
Hope this will work
regards,
santosh

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

Getting error when creat sales order and Stock Posting

Hi
I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
When create sales order getting error is that
1.This material is not defined for sales area 1000, 10, 00.
And if i use this T.Code MB1C,
2. Parameters for plant 1000 not maintained in Inventory Mgt.,
*3. Unit *** is not created in language EN.*
Thanks in advance

Dear selvi sankaran
1) Compare the sales organization, distribution channel and division of customer and material. In your case, either of that should have been created differently. Maintain the same sales area and retry
2) Go to omi8 and maintain the required parameters to your plant
3) Go to Material Master, select "Additional data" and click on "Descriptions". There maintain "EN" under language.
thanks
G. Lakshmipathi

How to save LIST_LINE_ID of Price List when create Sales Order Line

I dont know how save the LIST_LINE_ID of the Price List on Sales Order or anywhere when create Sales Order Line.
I create with the following steps:
Step 1: Create Price List for Item A with two line: Line 1 (Unit Price = 10,5, Pricing Attribute with Tax Classification Code = 5%), Line 2 (Unit Price = 11, Pricing Attribute with Tax Classification Code = 10%)
Step 2: I create Sales Order Line with Item A, Tax Classification Code = 5% --> Unit Selling Price = List Price = 10,5 but dont bookorder
Step 3: I update the Unit Price of Line 1 into 11.55.
Step4 : I book this Sales Order. Howerver, I use form personalization to customize Book Event: if the Unit Price of Item on Price List > Unit Selling Price then cant not Book. But I dont konw List Price of Sales Order belong the line of Price List.
Please help me check this issue. Thanks for your supports.
BinhTC
Email: [email protected]

Bob's right - except that if you have OM: List Price Override Privilege set to 'Unlimited' (and from your scenario it sounds as if you have) it is possible that the value in unit_list_price will vary from what was originally retrieved from the price list.
In that case, a safer bet is to use :LINE.original_list_price in your personalization as this will always contain what was originally retrieved and will mean you can avoid any repeat lookup via list_line_id.
Regards,
Jon

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

How to avoid XVBPA line item values while creating sales order

Hi Friends
I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
So this line item also coming in VBPA table, because its different from header data.
Anyone guide me, how to avoid this problem while booking order through program.
Thanks
Gowrishankar

I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
its not copying the same value from header to line item.
In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
Thanks
Gowrishankar

Material Determination when creating Sales Order referencing Contract

Hi Experts,
Is ther any way to force material determination when creating a sales order with reference to a contract?
When I create a sales order from scratch, the material determinations works fine, but when the sales order is created referencing a contract, the material is copied from the contract without material determination.
I've checked control copy at item level, without sucess.
Thanks in advance,
Nuno.

Hi Nuno,
Material determination is triggered by the material entered in the line item of the sales order.
You can carry out new Material determination/Product selection by copy cotrol configuration when creating with reference.
For your scenario of creating SO with reference to Contract the "product selection field should be blank" at item level copy control.
Blank --> Carry out new product selection
A --> Copy result of product selection
B --> like A, but the product selection is never cancelled afterwards
C --> Reserve
Hope this helps you.
Thanks
Arun

Dump Error when creating sales order

Dear Friends,
When I am creating sales order after entering order quantity field value in item table giving dump error.
INCLUDE LV03VF0B.
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.

Hello Praveen,
checked this program in other systems.
The weird thing in your code is the final parameter 0, it should not be there.
The call should be:
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX.
Hope it helps.

Issue when creating sales order with Sold-to/Ship-to Party's state

Hi All,
we have issue while creating Sales Order with picking up of State tax
for Ship-to-party & Sold-to-party.
<b>When we create a sales order, for the sold to party 140052732 and
ship to party 140052733 it is picking state tax. Which should not
suppose to pick? Because the partner is marked as tax exemption</b>.
Can any body tell me how can we solve this issue!
Why this is happening!
How to make not to pick tax when it is marked for tax exemtion.
As i am not Functional guy i am not aware what is happening here!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi Deep
What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
If so go and check the condition record meant for it. Follow the following steps
1) Go to Sales order
2) Select the line item for which the state tax is being picked.
3) In the condition tab select analysis.
4) In Analysis you shall find the condition type meant for state tax.
5) See which condition record has been found.
6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
7) If wrong correct it.
8) If anything else come back to the post and inform the details
Thanks
Regards
Sunil

Issue when creating sales order with Sold-to/Ship-to Party's state tax

Hi All,
we have issue while creating Sales Order with picking up of State tax
for Ship-to-party & Sold-to-party.
<b>When we create a sales order, for the sold to party 140052732 and
ship to party 140052733 it is picking state tax. Which should not
suppose to pick? Because the partner is marked as tax exemption</b>.
Can any body tell me how can we solve this issue!
Why this is happening!
How to make not to pick tax when it is marked for tax exemtion.
As i am not Functional guy i am not aware what is happening here!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi Deep
What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
If so go and check the condition record meant for it. Follow the following steps
1) Go to Sales order
2) Select the line item for which the state tax is being picked.
3) In the condition tab select analysis.
4) In Analysis you shall find the condition type meant for state tax.
5) See which condition record has been found.
6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
7) If wrong correct it.
8) If anything else come back to the post and inform the details
Thanks
Regards
Sunil

Display cost center field under item level when creating sales order

Similar Messages

Maybe you are looking for