Display different message when mouse move to certain button instance

I am using AS2 and what i want to do is display 6 differenht introduction message whenever my mouse move over 6 button respectively(named as btn1 to btn6), what should i do? I am newbie in flash.
My idea is putting as2 code under each button and whenever mouse rollover them , then call out movie clip of each sentence at certain place.
Any help is welcome, i am curently quite confusing about this issue.

Your idea should work just fine and is how some would approach it.
Another approach would be to just make the text part of the Over state of the buttons. That way you would not need any code to display the text since the button symbols have their states' code included with them.

Similar Messages

How to display item when mouse moves over Column value??

Hi there
It would be helpful if you could resolve the following :
i) I need to display the column 'A' values of my report in a Text field when mouse moves over column B of my report.
ii) I can able to display the same column value when mouse moves over or onclick happens. but my requirement is something like i have to display the other column value when mouse moves over.
iii) Also i noticed that, i can able to display the item only on "Display only Item" and not on Text field.
Any pointers to display my column value in Text field when onclick happens on my report column?
iv) One more thing that i noticed, i can able to perform onclick or mouse over only on Editable column and not on
non editable columns.
Any pointers on how to achieve the same when mouse moves over Non editable column of report?
Reference: I have created a dummy application (refer the following link), where i can able to display column value Salary on display only item using mouse move Event.
My requirement: when i click column Ename , the text field should show salary.
http://apex.oracle.com/pls/otn/f?p=56045:1
User:guest
Pswd: apex_demo
Any pointers on this would be appreciated.
Thanks
Vijay

Vijay,
If you use Jquery then this should do the trick.
$(document).ready(function() {
   $(".t20Report t20Standard tr").hover(function() {
     $("#P2_SALARY").attr("innerHTML",$(this).find("td:last input").attr("value"));
{code}
after looking at the source of your page it seems that your class for your report region is *class="t20Report t20Standard"* I am not 100% sure but you might have to correct that in the template. I am not sure how the selector will handle the space in the class name.
Hope this helps,
Tyson

Display the name of a button when mouse moves over it

when a mouse moves over a button i want the name of the label to be displayed at the tip of the mouse...like we have in microsoft word and other applications...how do i do that??

Its called a Tooltip. Now that you knoow that, search the API for a suitable method to invoke to set the Tooltip text.
luck, db

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How control can be customized so that it changes its picture when mouse moves over it

How control can be customized so that it changes its picture when mouse moves over it. As it happens in other develpment enviroments that one can customized the look 'n feel of any thing during the mouse movement over that very thing. Moreover can any body plz tell me that how one can modify the funtionality of a control by him self (not selecting the available functionalities of controls and indicators)

The attached LV 7.1 code uses an event configured to trigger on two controls when a "Mouse Enter" or a Mouse Leave" event occurs. Depending on the type key focus is either assigned or removed.
Please elaborate on the Q re: customizing a control.
Ben
PS Do NOT change the boolean to an indicator, save, run, change to control, save run again. That is bad.
Forgot to attachMessage Edited by Ben on 05-05-2005 09:30 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
MouseOver.vi ‏28 KB

How do you deal with error message when downloading movie on iPad? It was 75% complete.

How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.

I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.

When-Mouse-Move PJC/Bean

Does Oracle/OTN have any intention of providing a PJC/Bean sample that replaces the when-mouse-move trigger functionality? It would be nice to start using drag and drop again. I have not yet learnt Java so I can't write one myself.

Hi,
I've built a PJC that sends when_mouse_enter,exit,move events but that's not a aproach for the drag and drop functionality,because it takes a lot of time to send the event to the web server,and receive the coresponding actions to perform..
I've embedded the old PL/SQL code for drag and drop into JAVA directly,and the drag and drop works fine...
However ,problems raises when you have a big load into the parent canvas(many items)...the draging item is flickering up and down when dragging it over others UI conponents...I'm using JInitiator 1.3.1.9
Any ideas why?

Any way to display a message when Flash is not found on the iPad?

Apple is obviously rejecting Flash to protect it's 'App' revenue. I've been on Android phones that run Flash and display all my content perfectly smooth. It can be quite frustrating how they are trying to bury it when I still have yet to see HTML5 replicate the type of interactive content Flash is capable of producing.
Is there any way to display a message on the iPad when the Flash player is not found?
I'd like it to says something along the lines of:
"Unfortunately the Apple iPad does not support the Flash player because their business interests do not want it taking away from their App revenue.
Did you know that the Dell Streak, HTC Flyer, Blackberry Playbook, Motorola Xoom, Samsung Galaxy Tab, Toshiba Thrive, and HP Touchpad all support the Flash player?"
My HTML code looks something like this...
<html>
<head>
<title>My Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#ECECEC" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<body onresize="setFlashSize()">
<div id="flashid" style="width:100%; height:100%;">
<script type="text/javascript" language="JavaScript">
function setFlashSize(){
var viewportheight = document.body.clientHeight;
var viewportwidth = document.body.clientWidth;
var mydiv = document.getElementById("flashid");
var styleheight = parseInt(mydiv.style.height);
var stylewidth = parseInt(mydiv.style.width);
if (viewportwidth<880){
document.getElementById("flashid").style.width = 880+"px"; }
else {
document.getElementById("flashid").style.width = 100+"%";}
if (viewportheight<760){
document.getElementById("flashid").style.height = 760+"px"; }
else {
document.getElementById("flashid").style.height = 100+"%";}
setFlashSize();
document.write('<object data="index1.swf" width="100%" height="100%" type="application/x-shockwave-flash">');
document.write('<param name="movie" value="index1.swf" />');
document.write('<param name="allowScriptAccess" value="always" />');
document.write('</object>');
</script>
<noscript>Javascript must be enabled to view Flash movie</noscript>
</div>
</body>
</html>

Use swfobject for Flash detection and you can provide all kinds of alternate content... simple text, images, links, .js slideshow, a mov or mp4 video just for the iPhone... ANYTHING this is regular HTML. Your imagination is the only limit.
And YES, HTML5 is a far cry from replicating Flash... so give them the best of both worlds.
http://code.google.com/p/swfobject/
Review this article which deals with Flash and SEO for more ideas:
If you think that Flash is somehow bad for SEO, it's time to dispell that MYTH!
If fact, in some circumstances I'll use Flash INSTEAD of just HTML because then I'll have better SEO than with just HTML alone.
http://www.worldbarefootcenter.com/
The link to World Barefoot Center in the above post is just one example. View the source code and you see a couple paragraphs of text along with regular HTML links.... but what displays is the Flash version of the image and Flash links.
The client provided the artwork for the page... and that's what they wanted to use a .jpg image. Well yes, that could be done in HTML but it would be virtually invisible to Google. So Instead I converted the image into a Flash .swf and used swfobject to display the Flash. swfobject allows you to create alternate content inside the <div> which also holds the Flash .swf, then when the page is loaded it detects if the browser has the Flash pluggin. If it does, it displays just the Flash content, if not, it displays the alternate content. Since almost everyone has the Flash pluggin, for most people the Flash version of the <div> will display.
The alternate content for that <div> can be any regular HTML text, images, media player, links, etc., anything that you would use if you were not using the Flash. Now the best part is that the alternate content can be "over the top" as far as optimizing for SEO, since it will not be seen by most viewers.
Here's another example of SEO with Flash.. again, the page is just a single image provided by the client:
http://www.ksowetsuits.com/
View the source code. The alt content is paragraph after paragraph of information about the site, including lists and links. If it was just the HTML, it might be kind of a boring Home page. But for SEO I can go "over the top" in promoting the site, since most viewers will never see that part... but it's all indexed by search engines. The end result is BETTER SEO using Flash than just HTML.
On another Web site, a Flash video is displayed, the alt content is the complete text narration of the video. Now how many people would take the time to read that if they could just watch the video instead?? again, better SEO with Flash than without. In fact in one case we had first page search result from that video narration within 4 hours of posting the page.
On still another site with a Flash video, the alt content is another video, but a .mov version, which will, in effect play Flash video on the iPhone (not possible you say??). Well since the iPhone does not have Flash pluggin, it simply displays the .mov version of the video, while everyione else sees the Flash version.
So anyway, if Flash is a part of your Web development, you should look into using swfobject and alternate content.
http://code.google.com/p/swfobject/
Best wishes,
Eye for Video
www.cidigitalmedia.com
Adninjastrator

Can I display a message when Flash is not found on the iPad?

Apple is obviously rejecting Flash to protect it's 'App' revenue. I've been on Android phones that run Flash and display all my content perfectly smooth. It can be quite frustrating how they are trying to bury it when I still have yet to see HTML5 replicate the type of interactive content Flash is capable of producing.
Is there any way to display a message on the iPad when the Flash player is not found?
I'd like it to says something along the lines of:
"Unfortunately the Apple iPad does not support the Flash player because their business interests do not want it taking away from their App revenue.
Did you know that the Dell Streak, HTC Flyer, Blackberry Playbook, Motorola Xoom, Samsung Galaxy Tab, Toshiba Thrive, and HP Touchpad all support the Flash player?"
My HTML code looks something like this...
<html>
<head>
<title>My Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#ECECEC" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<body onresize="setFlashSize()">
<div id="flashid" style="width:100%; height:100%;">
<script type="text/javascript" language="JavaScript">
function setFlashSize(){
var viewportheight = document.body.clientHeight;
var viewportwidth = document.body.clientWidth;
var mydiv = document.getElementById("flashid");
var styleheight = parseInt(mydiv.style.height);
var stylewidth = parseInt(mydiv.style.width);
if (viewportwidth<880){
document.getElementById("flashid").style.width = 880+"px"; }
else {
document.getElementById("flashid").style.width = 100+"%";}
if (viewportheight<760){
document.getElementById("flashid").style.height = 760+"px"; }
else {
document.getElementById("flashid").style.height = 100+"%";}
setFlashSize();
document.write('<object data="index1.swf" width="100%" height="100%" type="application/x-shockwave-flash">');
document.write('<param name="movie" value="index1.swf" />');
document.write('<param name="allowScriptAccess" value="always" />');
document.write('</object>');
</script>
<noscript>Javascript must be enabled to view Flash movie</noscript>
</div>
</body>
</html>

You can parse out the userAgent property of browser. Here's an article that will point you in the right direction: http://www.askdavetaylor.com/detect_apple_iphone_user_web_site_server.html

Display a message when an item is selected from a dropdownlist

Hi,
I need to display a message(kind of alert message) when certain items are selected from the dropdownlist.
Let me know what is a good way to do this in web elements?
Thanks

hello,
unfortunately there is no validation / alerting for select menus in webelements.
however...if you're feeling ambitious and or this is a definite requirement for your project...custom functions are open source so you could write an on change javascript function within the WESelect custom function that will find the new value and compare it against your certain items array of values.
out of curiosity, what is your project's particular need to have an alert for a select menu based on what the end user selects? if this comes up more often or there's a good use case perhaps this could be built into a future version.
jw

Report with BDC not displaying success message when run in Background

I am running a BDC report in Background mode.The below statement is not capturing the Success message when a document is posted.But when I am running the same in ForeGround mode it is capturing and is displayed in the output.Can anyone please help me in understanding why this is happening and how can I resolve this.
CALL TRANSACTION 'MB1C' USING bdcdata MODE mode UPDATE 'S'
MESSAGES INTO messtab.

Hi Madhu,
I think your BDC didnt generated any document when you run it in 'N' screen mode.
Debug your program when you run it in background
Goto Tcode :SM37
Select the job ( march checkbox )
==> in command prompt enter 'JDBG'
==> Then you can start reexecting the job .
You can check the sucess messages accordingly in debug mode
Also add a read statement on messtab for msgtype = 'S'.
Thanks
Bhanu

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

Hide a box that shows the url of a link when mouse move on it

when i move my mouse to a link a box opened that contains url of the link. i want to disable this box which is shown in the image.
http://postimg.org/image/xdqelqeil/
how can i disable this feature?
i use windows xp sp3 and firefox 33.1

Hello zra1221, use the next code from [https://support.mozilla.org/el/questions/917248#answer-307568 cor-el's Chosen Solution]. (i think still works) :-)
thank you

BAPI thorwing 3 different message when GR's being more than PO Qty

I am using BAPI(Goods_movement_create)
This BAPI throws 3 different error messages when the scenario is the same.
I could see all the 3 messages below are the result of GRu2019s being more than the PO qty.
10128844     30     4     E     No goods receipt possible for purchase order 10128844 00030
4500121287     10     12     E     PU Ordered quantity exceeded by 12 EA : 17650 0081 0018
4500104731     10     1     E     Material document data and PO data do not match (Material)
thanks
Senthil

you have referenced 3 different POs, hence you have to get 3 different messages, even they would have the same error reason. but the message has variables, like PO number and item number and even more.
Do you just want a summary message like: 3 error occured?
and what does the user then do? posting in SCN forum what the problem is?
you will get the same messages if you use MIGO to post it online.

Adobe pro 9 changes printers when mouse moves over printer window

When trying to print an adobe document, the default printer is ignored and the selected printer changes as the mouse moves across the printer window to reach the print button, making it difficult to stabilize the printer selection. Please advise

I have now checked other people in my departments Adobe versions.
I have Adobe Pro V9.0.0, and does not print correctly.
1 person has Adobe XI Pro and prints correctly.
1 person has Adobe Pro 9.5.5 and prints correctly.
1 person has Adobe Pro V9.0.0 and does not print correctly
I have now installed the available upgrades which only took me to 9.2.0 and still prints incorrectly.
I wil try and find the other updates and see if that helps.
thx.

Display different message when mouse move to certain button instance

Similar Messages

Maybe you are looking for