Display icon with item name

Hi all,
I want to create a item that will display like "****Inbox". Here **** denoted by image and Inbox denoted by level. Can any one tells me is it possible to create?
If it is possible than tell me the procedure.
Thanks in advance,
Subhas

You can include an item of type icon and point it to the Image file stored in OA_MEDIA. See if this suffices your requirement.

Similar Messages

  • VIEW won't display channels with same names

    Hello,
    We have recently installed DIAdem 2010 and are beginning to find channel name problems that we didn't have before with 9.1.
    Traditionally we have always set the name-oriented channel references to 'only channel name' and we have never had any problems when displaying multiple traces in VIEW. Now, we find that when we display more than one trace in VIEW with channel names that are repeated we get problems with the axis system display dialogue box. This dialogue box tells me that the X and Y channel names AND NUMBERS are the same for all three traces when in fact the data displayed is different. If I try and change one of the channels it immediately reverts back to the first channel with that name.
    I have attached a screen dump to help explain. The image shows a VIEW window with three speed time histories from three separate data files that have been loaded together. The three X channels will all be named 'time' but will be channel numbers 1, 4 and 7. The Y channnels are all 'speed km\h' and are numbered 2, 5 and 8. However, the dialogue box shows that all three traces are made from channels 1 and 2 despite the three traces appearing different. If I change one of the 'time' channels from number 1 to, say, number 4, then it reverts back to number 1 as soon as I move the focus to somewhere else in the box. Version 9.1 never had this problem.
    If I swith the name-oriented channel references to '[group index]/channel name' then the problem goes away - even thought the data displayed in the graph is the same!
    I'm not entirely clear on the reasons for settling on 'name only' references - probably historical - but I am even less clear on the effect of switching to '[group index]/channel name', particularly with the many autosequences that we use.
    Is this a bug that can be fixed?
    Regards, Si.
    Attachments:
    VIEW.jpg ‏236 KB

    Simon,
    The DataFinder is a database that DIAdem installs that integrates directly into the NAVIGATOR, so that you can easily query data files/groups/channels or compile properties from multiple files into correlated curves on a graph, etc.  You might be interested in the ability to look inside your data files in the NAVIGATOR to see the group/channel structure and their properties.  This is particularly interesting if you wan to load selected groups/channels from one or more files.
    Here are the feature description files,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments
    Attachments:
    New Features from DIAdem 9.1 to 2010.zip ‏69 KB

  • Working in Adobe  Illustrator CS5.  Fonts are shown as Font type (i.e. True Type, Adobe, OpenFace icons) with no name unless I high light an font icon.  This does not happen in Photoshop or InDesign.  Help!

    Illustrator CS5 for Mac.  OS Yosemite 10.10.1 Font Drop Down show only font type icon unless I drag my cursor over an icon to reveal the font name and style.   Fonts works great in InDesign and Photoshop.

    j,
    I believe this may solve it:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594

  • Old Firefox's icon and item Name (not blue one) in Application has disappeared suddenly from the screen. How can I retrieve this?

    When I clicked "Finder" and "Application", Firefox (old one, not new blue one) icon and Name used to show up in the screen, but no longer. How could I bring them back? There are no difficulty
    in running computer, but I cannot update Firefox. Please advise.
    Thank you.

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • Displaying PO with login name as created by name

    Hi sdn,
    i am facing one problem where when i open any PO created by date is shoing my login name.
    if some one opens it it's showing their name.
    please suggest me what may be the problem.
    Thanks & regards
    Naresh

    Naresh,
    There is no problem and its a standard SAP functionality.
    Regards,
    Manish

  • Display icons in Network ui element

    Hello everybody!
    Im trying to display some hierarchies in a Network ui element. Generally, this works fine, but I'm not able to display icons with the elements inside the applet. The examples in the JNet/JGantt Developer Documentation use <icon/>-tags with the path to a gif file in the Type Repository section like this
    <type name="SomeTypeName" inherits="SomeBaseTypeName">
         <icon space="5">apps/orgchart/chief.gif</icon>
    </type>
    and the Type Repository documentation tells me to
    Specify the relative address of the URL in relation to the code base of JNet.jar
    (a file in your own JAR. file: apps/slm/icon.gif, for example). If
    the relative path starts with apps, JNet automatically adds the
    missing com/sap/jnet. We recommend that you use the relative path
    wherever possible, because you can store the icon graphics in the same directory
    in Perforce as the type repository.
    But how would I determine the relative address of my icon files stored in my web dynpros src/mimes/components/<component name>-folder inside my WebDynpro jar/ear/whatever in relation to the code base of the JNet.jar which - I guess - would reside inside the WebDynpro runtime or somewhere else on the server, but not inside my own jar ? Or am I wrong about this ?
    Thanks a lot
    Michael

    Hi Christian!
    That's what I tried in the first place. The result is something like
    /usr/sap/XXX/J02/j2ee/cluster/apps/myCompany.com/my~webdynproapp/servlet_jsp/webdynpro/resources/myCompany.com/my~webdynproapp/root/Components/package.path.to.my.component/imagename.gif
    but the applet does not find the image files. Since the JNet documentation says to specify the relative path from the JNet.jar code base, I'd have to find out where that is and calculate the relative path, but possibly this will only work inside a single jar (which I don't have since the JNet.jar is somewhere among the portal WebDynpro runtime components, I guess).
    Preferrably, I'd like to have a look at a working example using the Network ui component with external icons inside a java WebDynpro. Propably someone has done that before...
    Thanks
    Michael

  • ICON with field contents in case of ALV GRID

    please have a look at the program. the output of the program display ICONS with the field contents.
    I wanted the same functionality in case of GRID layout.
    But in case of GRID layout I am only getting ICON without field contents.
    In this Example
    if I use ALV LIST the ouput will be STACk ICON with X
    IF I use ALV GRID the output will be STACK ICON.
    REPORT ZTEST_SO1 .
    type-pools : slis.
    data : result(25).
    types : BEGIN OF Ty_MARA,
            gv_flag type char25,
            end of ty_mara.
    data : gt_mara type standard table of ty_mara,
           wa_mara type ty_mara.
    DATA : gt_fieldcat type slis_t_fieldcat_alv,
           wa_fieldcat type slis_fieldcat_alv.
    wa_fieldcat-fieldname = 'GV_FLAG'.
    APPEND WA_FIELDCAT TO GT_FIELDCAT.
    CALL FUNCTION 'ICON_CREATE'
      EXPORTING
       name                        = '@3B@'
       TEXT                        = 'X'
       INFO                        = 'YY'
       ADD_STDINF                  = 'X'
    IMPORTING
       RESULT                      = wa_mara-gv_flag.
    IF sy-subrc EQ 0.
    APPEND WA_MARA TO GT_MARA.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
       I_CALLBACK_PROGRAM             = 'ZTEST_SO1'
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = ' '
      I_STRUCTURE_NAME               =
      IS_LAYOUT                      =
       IT_FIELDCAT                    = GT_FIELDCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
      IT_EVENTS                      =
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
      TABLES
        t_outtab                       = GT_MARA
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    Read the documentation of FM ICON_CREATE, the purpose of the Function module is entirely different from what you are using it for.
    To print Icons in ALV (Using FMs ) all you need to do is to send the Icon name in the field.
    Also parameters TEXT and INFO of FM ICON_CREATE seem to be flags, that are appended to the icon name so that when you set it on the screen the appropriate info or Text is shown.

  • Display Icon not shown during a Flash is running

    Hi,
    I have a Display Icon with text, which is shown all the time.
    Only during the Flash movies are running, I want it not shown,
    because the Flashs have the same dimensions as the presentation
    window.
    So I tried it with a variable. I gave the Display Icon the
    variable "showText", so when "showText :=1" the text is shown; :=0
    the text is not shown. Before the Flash movie Icon I set it to not
    shown :=0, but it doesn't work!
    Another solution is to erase the Display Icon before the
    Flash movie Icon and to put it in again after the Flash Icon, so
    that the text is to be shown again. But it will be plenty of work,
    because I have many Flashs!
    Does anyone has an idea, how I can handle this?
    Many thank's for help!
    hannah

    What if you set the display icon layer lower than the flash
    layer. That way when the flash loads you will not see the display
    icon contents and when you erase the flash the display icon is
    still there.

  • Create icon with embedded link

    I have an image/icon. I have a link. I want to send the link by email in the form of an icon that can be dragged to the desktop, and clicked to access the link.
    Every time I send the image/link combination and it is dragged to a desktop, it defaults to the '@ http' icon - with the name of the full url.
    I know both the icon image and the name can be changed once they are on the desktop - but there must be a way to send the icon/link, and have it retain the form in which it was created.
    I've tried to use the slice tool to embed the link in the image - but without success. Can anyone suggest a route to achieve my goal?
    Thanks

    You have some nice icons there, Vlasta. :)
    As to the free service, how does that work on the Mac? I assume you are aware this is a
    Macintosh forum?
    This service produces a tiny Windows exe file containing the specified icon and the address of a web page. When the application is run, it opens the web page in the default web browser.

  • FRM - 40105 : Unable to resolve reference to item item name

    Hi,
    FRM - 40105 : Unable to resolve reference to item <item name>
    When I am opening a form I am getting the above mentioned error. Instead of <Item name> how we can display the error like <:CTRL_BLK.DOC_DATE>
    Thanks & Regards,
    Jenson

    Hi,
    Actually I know what is the reason for getting this error. What I tried to ask you is any way to display the item name, which error is occurred.
    In the form around more than hundred item setting the SET_ITEM_PROPERTY , there only I am getting this error. Like this around more than five form I have to debug. I would like to know through error handling routine or some other code we can display the exact item name, which error is occurred.
    Thanks & Regards,
    Jenson V.A.

  • Customize display of category group names in item regions (902)

    Multi-level categorization is inconsistent within different portal contexts. Flat category structures work fine but sub-categories do not.
    For example let's define a set of categories: foo, foo/bar, test, test/foo, abc, abc/bar
    where bar is a sub-category of foo and so forth.
    The additem wizard shows the category in the form: category/sub-category/sub-sub-category/etc which is the preferred approach.
    However, an item region having Group By Category and "Display Group By Banner" checked is not the same. Here the group-by-text only shows the end-category name (not the full category/sub-category); i.e., only shows the last group "category" without the context of the full category.
    Want to show items in following style:
         foo
              item1
         foo/bar
              item2
         test/foo
              item3
         abc/bar
              item4
    As opposed to:
         foo
              item1
         bar
              item2
         foo
              item3
         bar
              item4
    Likewise, in the Advanced search the list of categories to search for are:
         foo
         .bar
         test
         .foo
         abc
         .bar
    What are some best practices to customize the display of custom items with sub-categories showing the full category/sub-category in 9iAS 9.0.2?
    Explicitly creating a flat category structure with '/' in the names doesn't seem the best use of item categories.
    And it looks like the content area SDK won't be available for a little while.

    Hi Jason
    The only way to show the path of your nested categories in the display banner is to name the subcatgory with the path information (i.e. 'test/foo' not 'foo'). The problem with showing the full path is scalability - rendering a deeply nested tree in the display banner or as an attribute would cause real problems. It was a design decision to go with the way that it is. If you feel strongly that Development should reconsider this decision, please feel free to log an enhancement request at:
    http://ers.oracle.com
    Product: Portal
    Component: Portal UI

  • Is there a dialing app which places icons on the screen along with the name being called?

    Does anyone know of an app which places a limited number of phone numbers along with the name of the person being called on the screen of the iPhone?  Our grandfather is 95 years old, and can not operate the small buttons on most cell phones, and has trouble navigating around the phone to make calls.  We just want 3 phone numbers displayed, along with who is being called, so he does not have to navigate to anything except the main screen.  Thanks.

    http://itunes.apple.com/us/app/icon-project-home-screen-icon/id434277910?mt=8

  • Customize item display form with jslink

    hello ,
    I would like to customize display form of item to hide the ribbon , the footer and columns name in the form.
    How to accomplish my goal with JSLink or any other client side rendering method. 
    I look for a solution with no code.
    Any help will be appreciated.
    Thanks

    Hi,
    You can deploy it as Sandbox solution by developing custom list definition which includes the custom Display form Page instead of default form page. You embed the style sheet in the display form page. 
    http://blogs.technet.com/b/meamcs/archive/2011/09/05/a-listdefinition-with-custom-forms.aspx
    http://www.ilikesharepoint.de/2013/11/sharepoint-create-custom-list-forms-with-visual-studio-part-2/ 
    kmhsad

  • Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

    Hi Apple community!
    I have a [rather worrying] problem.
    When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
    " The operation can’t be completed because an item with the name “.DS_Store” already exists. "
    I am not given an option to skip this file or anything else.
    But I simply cannot complete the operation!
    I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
    but no success.
    The same thing keeps happening.
    At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
    but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
    So effectively, it seems I cannot backup my files anywhere!
    Any help or advice would be greatly appreciated.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error message "The operation can't be completed because an item with the name .DS_Store already exists"

    Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message  "The operation can't be completed because an item with the name .DS_Store already exists".
    The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
    All file types are susceptible
    the HDs are all Mac OS X formatted, no foreign file formats involved
    the HDs are all journal-enabled, OS X extended formats
    have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
    any ideas anyone?
    would appreciate any thoughts or sugestions, this has got me beat
    the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
    many thanks for any suggestions

    This is definitively a nuisance. When copying large amounts of files between volumes  try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
    gunnars-mac-mini-i7:Volumes gunnar$ man ditto
    NAME
         ditto -- copy directory hierarchies, create and extract archives
    SYNOPSIS
         ditto [-v] [-V] [-X] [<options>] src ... dst_directory
         ditto [-v] [-V] [<options>] src_file dst_file
         ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
         ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
         ditto -h | --help

Maybe you are looking for