Display month of the next event as default

Is there any way to make the event calendar display the month of the next upcoming event when the event calendar loads, and not the current month as default?

Hi,
This looks like an example of a Pivot . See the forum FAQ {message:id=9360005} for several ways to do that, suitable for different versions.
I hope this answers your question.
If not, post your best attempt, along with a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. Sinmplify the problem. For example, even though you're interested in all days of the month, post a problem that only involves, say, days after the 26th of the month. We'll help you find a solution that works for all days.
In the case of a DML operation (such as INSERT) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table(s) after the DML.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0). This is always important, but even more so with pivots.
See the forum FAQ {message:id=9360002}

Similar Messages

  • Hi i was wonder if you all can't have a time sync Calender, like when you traveling it will display when is the next holiday an full moon, or any info about the place you going to

    i would like to see apple invent a smart calander one that can time sync with the location you at, displaying when is the next holiday etc an also be alble to show when is thee next full mooon all so...

    Sorry the site didn't suggest these articles, but from your description, I'd start here:
    * [[Firefox can't load websites but other browsers can]]
    * [[Configure firewalls so that Firefox can access the Internet]]
    (If those are not linkified in email, come back to the thread for live links)

  • Display month in the column

    hello...i have a report that actually need a layout of displaying the month in the column. the format as below:
    last month new loan (09.2008), this month new loan (10.2008), the month here will change based on the user input of the current month and the report will auto display out the month as above. is there any way that we can do this??? do i need to create another variable for this?

    Hello,
    you have to create a new variable for e.g. 0calmonth. This variable can be used in your keyfigures.
    The variable can be filled with actual month. To get the last month data you can use the OFFSET function (-1 last month) in Query Designer.
    Regards,
    Markus

  • Is it possible to trigger the next event from within the event case?

    I have a rather complicated event that is triggered by a change in value of a particular button in the interface. In some cases, I want to alter that button's value when handling other events. But when I do this, the event handling a change in value for that button does not get triggered. Is there a way to make sure the value change event gets handled at the next iteration of the while loop in which the event structure sits?
    Solved!
    Go to Solution.

    Hi Mike,
    Thanks! I was using properties and did not previously know what the value(signaling) was. Knowing this will really help me clean up a lot of redundant code.

  • Syncing more than 12 months throws the next year out

    I have syncned from my pc outlook 2007 to my 3GS OK, but if I do it on certain appointments for no "end date" they seem to advance a day in the following year. how do I correct this ?

    All right, so I solved it. I ended up using this formula:
    In my "Log" table
    =MONTH()*10000+YEAR(), so I got 102007
    then in my "Monthly Stats" table with the month only displayed in the 1st column, I used
    =COUNTIF(Log :: C,(10000*MONTH()+YEAR()))
    If there's a better, easier way, I'm all up for it, but this works perfectly.

  • Displaying title in the next page dynamically, how?

    I have tour pages each with a different tour title ..
    like this one :
    what I want is , when anyone clicks "Reservation" button on the top left ,, the tour title is automatically shown on the top of the reservation page (Program Name) :
    Program name : (Alexander The Great)
    how can I achieve that ?

    okay now I want to apply this on a wide scale ..
    I have 26 tours and I modified each reservation link with a new tour value
    tour=new different value for each
    and this is my select code :
    <select name="Program Name" id="Program Name" tabindex="5">
    <option<?php if ($_GET['tour'] == "") { ?><?php } ?>>Choose A Tour</option>
    <option<?php if ($_GET['tour'] == "al_the_great") { ?> selected="selected"<?php } ?> value="Alexander The Great">Alexander The Great</option>
    <option<?php if ($_GET['tour'] == "test_of_egypt") { ?>selected="selected"<?php } ?> value="Test Of Egypt">Test Of Egypt</option>
    <option<?php if ($_GET['tour'] == "romantic_nile") { ?>selected="selected"<?php } ?> value="Romantic Nile">Romantic Nile</option>
    <option<?php if ($_GET['tour'] == "q_neferari") { ?>selected="selected"<?php } ?> value="Queen Nefertari">Queen Nefertari</option>
    <option<?php if ($_GET['tour'] == "king_tut") { ?>selected="selected"<?php } ?> value="King Tut">King Tut</option>
    <option<?php if ($_GET['tour'] == "k_treasure") { ?>selected="selected"<?php } ?> value="King Treasures">King Treasures</option>
    <option<?php if ($_GET['tour'] == "egypt_reefs") { ?>selected="selected"<?php } ?> value="Egypt Reefs">Egypt Reefs</option>
    <option<?php if ($_GET['tour'] == "tut_dive") { ?>selected="selected"<?php } ?> value="King Tut Dive">King Tut Dive</option>
    <option<?php if ($_GET['tour'] == "nile_legend") { ?>selected="selected"<?php } ?> value="Nile Legend">Nile Legend</option>
    <option<?php if ($_GET['tour'] == "ram_dolphins") { ?>selected="selected"<?php } ?> value="Ramses &amp; Dolphins">Ramses &amp; Dolphins</option>
    <option<?php if ($_GET['tour'] == "red_sea_dolphins") { ?>selected="selected"<?php } ?> value="Red Sea Dolphins">Red Sea Dolphins</option>
    <option<?php if ($_GET['tour'] == "sea_sun") { ?>selected="selected"<?php } ?> value="Sea & Sun">Sea & Sun</option>
    <option<?php if ($_GET['tour'] == "baharya") { ?>selected="selected"<?php } ?> value="Baharya Discovery">Baharya Discovery</option>
    <option<?php if ($_GET['tour'] == "desert_lovers") { ?>selected="selected"<?php } ?> value="Desert Lovers">Desert Lovers</option>
    <option<?php if ($_GET['tour'] == "egy_adventure") { ?>selected="selected"<?php } ?> value="Egypt Adventure">Egypt Adventure</option>
    <option<?php if ($_GET['tour'] == "adv_grand") { ?>selected="selected"<?php } ?> value="Grand Egypt Adventure">Grand Egypt Adventure</option>
    <option<?php if ($_GET['tour'] == "adv_nile") { ?>selected="selected"<?php } ?> value="Nile Adventure">Nile Adventure</option>
    <option<?php if ($_GET['tour'] == "nile_felucca") { ?>selected="selected"<?php } ?> value="Nile Felucca">Nile Felucca</option>
    <option<?php if ($_GET['tour'] == "nile_sec") { ?>selected="selected"<?php } ?> value="Nile Secrets">Nile Secrets</option>
    <option<?php if ($_GET['tour'] == "adv_tut") { ?>selected="selected"<?php } ?> value="Tut Adventure">Tut Adventure</option>
    <option<?php if ($_GET['tour'] == "karnak") { ?>selected="selected"<?php } ?> value="Karnack">Karnack</option>
    <option<?php if ($_GET['tour'] == "king_mena") { ?>selected="selected"<?php } ?> value="King Mina">King Mina</option>
    <option<?php if ($_GET['tour'] == "q_hatchepsut") { ?>selected="selected"<?php } ?> value="Queen Hatshepsut">Queen Hatshepsut</option>
    <option<?php if ($_GET['tour'] == "q_cairo") { ?>selected="selected"<?php } ?> value="Quick Cairo">Quick Cairo</option>
    <option<?php if ($_GET['tour'] == "sun_ray") { ?>selected="selected"<?php } ?> value="Sun Ray">Sun Ray</option>
    <option<?php if ($_GET['tour'] == "sun_sun") { ?>selected="selected"<?php } ?> value="Sun &amp; Sea">Sun &amp; Sea</option>
    </select>
    is this code right ?
    do I need to put this in each select option ?
    selected="selected"

  • Header not getting  displayed in the next page in the second table

    Dear Experts ,
    I have a query regarding Header not getting  displayed in the next page in the second table of the main window. .Let me elobrate the issue.
    I have a smartform in which there are  2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is  for future delivery date P O separated by text in between.
    Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
    Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
    Please provide a elobrate solution on this problem as the requirement is urgent.
    Thanks,
    Regards,
    Sachin Hada

    Hi Sachin,
    you need to cteate two pages FIRST and NEXT.
    in first page --> FIRST
        next       --> NEXT
    in next page
      page---> NEXT
      next ---> NEXT.
    you copy the first page main window is the same in next page
    aslo
    I think help ful for you
    thanks & Regards
    BHUPAL.

  • How to calculate the measure for the next month using the AGO Function

    Hi,
    I need to calculate the measure for the current month and the next month.
    Can anyone please let me know the syntax to use AGO function for the above requirement.
    Regards,
    Ambika Nanda.

    Hi.
    You can also use Oracle analytic functions LAG and LEAD inside the EVALUATE obiee function. The second one will give you the next measure.
    For example the report is:
    TIMES.CALENDAR_MONTH_DESC
    SALES.AMOUNT_SOLD
    LAG column: EVALUATE('LAG(%1, 1) OVER (ORDER BY %2)' AS DOUBLE, SALES.AMOUNT_SOLD, TIMES.CALENDAR_MONTH_DESC)
    LEAD column: EVALUATE('LEAD(%1, 1) OVER (ORDER BY %2)' AS DOUBLE, SALES.AMOUNT_SOLD, TIMES.CALENDAR_MONTH_DESC)
    And the result is:
    CALENDAR_MONTH_DESC--------AMOUNT_SOLD--------LAG--------------LEAD
    2000-01----------------------------------8025513.84---------------------------8474475.88
    2000-02----------------------------------8474475.88----- 8025513.84-----7439568.24
    2000-03----------------------------------7439568.24------8474475.88-----7062040.48
    2000-04----------------------------------7062040.48------7439568.24-----7497971.40
    Regards
    Goran
    http://108obiee.blogspot.com

  • How to make the iCal in iPad to convert the received events in the proper time according the time zone of the device

    Heya.
    I have the next event:
    BEGIN:VCALENDAR
    VERSION:2.0
    METHOD:PUBLISH
    PRODID:someId
    BEGIN:VTIMEZONE
    TZID:Central Europe Standard Time
    BEGIN:STANDARD
    DTSTART:20111002T030000
    RRULE:FREQ=YEARLY;BYDAY=-1SU;BYHOUR=3;BYMINUTE=0;BYMONTH=10
    TZNAME:Central Europe Standard Time
    TZOFFSETFROM:+0200
    TZOFFSETTO:+0100
    END:STANDARD
    BEGIN:DAYLIGHT
    DTSTART:20110301T020000
    RRULE:FREQ=YEARLY;BYDAY=-1SU;BYHOUR=2;BYMINUTE=0;BYMONTH=3
    TZNAME:Central Europe Daylight Time
    TZOFFSETFROM:+0100
    TZOFFSETTO:+0200
    END:DAYLIGHT
    END:VTIMEZONE
    BEGIN:VEVENT
    DESCRIPTION:Some Description
    DTEND;TZID=Central Europe Standard Time:20120919T163000
    DTSTAMP:20120913T082257Z
    DTSTART;TZID=Central Europe Standard Time:20120919T160000
    LOCATION:Some Location
    SEQUENCE:0
    SUMMARY:Some Summary
    UID:1cf04d1c-2b5c-474c-86f4-108101da9b7a
    END:VEVENT
    END:VCALENDAR
    I am in another timezone - GMT + 2.
    When I am adding the event to outlook in win7 - it is converted to my local time = from 17 to 17:30.
    When I am adding it to a friend's Mac - it is converted to his local time.
    When I am trying to add it in a Ipad which is set to the same timezone - GMT + 2, and with timezone support on, it is not converted but set to 16 - 16:30 and the timezone for the event is put to floating, so what to change in the setup of the event to recognize it and converted to the right time or maybe I should change something in the iPad.
    Thanks in advance

    Bilalus,
    Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions. 
    Warm Regards,
    William Fernandez
    Applications Engineering
    National Instruments

  • Is there a way to default the monthly calendar display so that the current day always shows on top?

    Is there a way to default the monthly calendar display
    so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
    is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
    but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks. 

    Thank you!
    Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
    I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
    three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
    in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
    flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
    even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
    format until Outlook programmers add this Technology Age feature in newer versions.  
    See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
    since last week or the week prior.  
    If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
    Thanks again in advance!

  • I can't be the only person who has this problem - when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that

    I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.

    Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.

  • I downloaded Mountain Lion in my  i have macbook pro retina display last month.  but I don't get airplay the option on my macbook.  I went to display preferences, but the airplay is not available.  What is the next step?

    I downloaded Mountain Lion in my  i have macbook pro retina display last month.  but I don't get airplay the option on my macbook.  I went to display preferences, but the airplay is not available.  What is the next step?

    You also need:
    Apple TV (2nd or 3rd generation) with software update v5.0 or later.

  • Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF by default, not the top. How do you change this?

    Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF page by default, not the top of the PDF page. How do you change this? In Mac OS 10.9 and previous, going to the next or previous PDF file displays the top of the PDF by default. Is there a way to change this back? When I go to the next or previous PDF file, I want to first view the top of the page, not the bottom. This really doesn't make any sense. Any help? Thanks!
    MacBook Air (13-inch, Mid 2012)
    2 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    500 GB Flash Storage
    Preview Version 8.0 (859)
    Mac OS 10.10.1

    That to me seems like a bug in Yosemite.
    Apple Feedback http://www.apple.com/feedback/
    Bug Reporter https://bugreport.apple.com/

  • Events that span midnight now display on the next day??

    Night shifts that go from 11pm-7am from an Exchange calendar used to display on the 1st day on my iPhone 3GS. On iPhone 4, those events display on the 2nd day (i.e., the end date). Anybody find a workaround to get them to display on the start date?

    I work the same kind of shift, one that spans all night. Mine show with the start time on the correct day and another one for the end time on the next day.

  • Is there an about:config option to change FF's default action when closing a tab so that it displays the previous tab rather than the next tab?

    With the new 3.6 tabbing behaviour (new tabs open to the right of the current tab, rather than at the end of the tab list), the old default behaviour when a tab is closed is no longer appropriate. Instead of displaying the next tab after the one that was closed, FF should display the previous one. Is there an about:config option to change the default behaviour upon closing a tab?

    Try one of these:
    *Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
    *Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122
    *Tab Control: https://addons.mozilla.org/firefox/addon/1480

Maybe you are looking for

  • HT3529 How can I remove my old phone number from my APPLE ID.

    How can I stop my old phone number recieve my iMessage of my apple ID.

  • Simple transformation with reference to ddic structures

    Hi, experts, we decide to use xml as the format when exchanging massive data with other applications. and we want to use simple transformation because according to the document it's more fast. actually our file structure is determined by certain ddic

  • Attachment in FB03 through program

    Hi, I have one urgent requirement.  Current program is uploading journal entry posting in SAP.  Now the requirement is, after uploading journal entries in SAP now the user is going to the FB03 transaction and attaching all the document in FB03 transa

  • How can one resize a cell editor when in use in a JTree?

    It is possible to resize, for example, a JTextArea cell editor while it is being used in a JTable by having a document listener check the preferred height and then changing the rowHeight of the table to fit that. This gives the nice effect of the tab

  • Weblink opens new window?

    I've successfully created swf's in Keynote that go to another website when clicked; it makes for a terrific banner ad. My problem is I need the I need for the link to open a new page with the linked URL, leaving the original webpage with my banner ad