Display of "Line resource" in RRP4 output

Dear Team
The transaction /SAPAPO/RRP4 (Receipt view) has the facility to provide Resource in the input selection screen.
But it does not have the coulmn to display the Line resource in the Output of RRP4.
Hence suppose we provide 3 lines in input selection scree, and execute, we can not understand which line each order belongs to.
Does anyone know any BADI / Exit which can make the line resource available in RRP4 output?
Regards
Nishigandha

Dear Sagar,
Yes this is possible.
BADI /SAPAPO/RRP_IO_COL.
Production line for Receipt View.
1. In Method RRP_USEX_COLS_GET_TEXT_02.
       Append USEXIT1' to CT_CUS_FIELDS. and    APPEND (Your header name like
        'Production Line' TO CT_COLS_TEXT.
2. In Method RRP_USEX_COLS_FILL_02 add the logic for the particular field and modify the field
    ct_receipts.
You will be able to see production line in RRP4.
*Reward points if it works.
Thanks
AP

Similar Messages

How to display multiple lines of texts in a single rows in ALV

Hi,
I have a unique requirement in which i have to display multiple lines if texts for a single rows in ALV Grid. Right now in my output it is coming in single line which is not visible fully because that text is more than 255 character. So i want to display the test by splitting into multiple lines and show it on output. Please suggest some solution for this if this is possible in ALV.
Thanks,
Raghav

Hi Raghavendra,
Its not possible to display multiple line in one row of an alv, but i think you can acheive it by splitting the whole text into multiple sub-text.
For example, if your requirement is as below:
Field #1          Field #2
1                    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(200 characters)
2                    yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy(220 character)
then you can break Field#2 value into say 50 character and then populate the internal table with repetative entries of Field#1 and the finally sort it by Field#1 value... as a result of which you output will be somewhat as below:
Field#1          Field#2
1                   xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2                   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyy
Hope it will help you in meeting your requirement.
Regards,
Shradha

How do you display multi line text

Hi
How does one display multi line text? I would like to display address information on the screen so that the user can select it and copy/paste it into another application (ms word).
I have the address information as separate columns (address1, address2, city, province, postal code) so I've changed the query on my view object to add it as address1 || chr(10) || address2 || chr(10) || city ....
If I display it on the page as an output text, it all displays as one line (okay, the chr(10) thing did not work but that's beside the point).
In general, is there a way to display multi line text? What component is suitable for this, if there is one?
Thanks

You can use normal outputText components in a panelGroupLayout (vertical layout) and add each attribute to it. The remove the labels or set the components to simple. You can then mark the data in the browser and use normal copy&paste to transfer the data.
If you want to output longer text with line breaks you can use an outputText with escape=false and use the br html tag to generate a line break;
<af:outputText escape="false"
value="+++++++long<br>test<br> this is a long text in multiple lines" id="ot10" truncateAt="#{viewScope.ToggleBean.truncateLength}"/>Timo

Display of check box as the output in the ALV

Hi Experts,
Please guide me with the steps of displaying the check box as the output of an ALV report
thanks

Hi,
Check this program: BALVSD01.
Check this code:
*& Report ZAK_ALV
REPORT ZAK_ALV line-count 10.
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ck type c,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'CK'.
fieldcatalog-seltext_m = 'CHECKM BOX'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-CHECKBOX = 'X'.
fieldcatalog-EDIT = 'X'.
fieldcatalog-key = ''.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
fieldcatalog-checkbox = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 100 rows
from ekpo
into CORRESPONDING FIELDS OF table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

I have to keep going back to utilities first aid and do a disck permission repair because my monitor keeps going to sleep. this is the message i get.Permissions differ on "System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/

I have to keep going to disk repair to correct an issue that makes my monitor go to sleep the message i get is
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/pt.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .

Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

I am trying to display three lines of text but blank lines are being inserted between them.

I have a section on the right side of my homepage for upcoming events. It was displaying fine until I changed the data and now the three lines are displaying blank lines between each one.
Here is the code.
<h2 class="meeting"> </h2>
      <h2 class="meeting"><a href="http://www.astm.org/MEETINGS/filtrexx40.cgi?+-P+TERM+D02+searchresults.frm">ASTM D02 2014</a></h2>
   <img class="news-image" src="images/news/Sheraton San Diego.jpg" width="100" height="61" />
   <p class="news-text">December 7-11, 2014</p>
      <p>Sheraton San Diego Hotel and Marina</p>
      <p>San Diego, CA</p>
</div>
ASTM D02 2014
December 7-11, 2014
Sheraton San Diego Hotel and Marina
San Diego, CA
The picture is displaying to the right but I want to get rid of the blank lines between the text. I am using Dreamweaver CS5 Version 11.0 Please help.

Sorry I inserted the wrong code.
<div id="rightsideUpcomingevents">
   <h2 class="upcoming">Upcoming Events</h2>
      <h2 class="meeting"><a href="http://www.gulfcoastconference.com">Gulf Coast Conference</a></h2>
   <img class="news-image" src="images/news/hotel_moody.jpg" width="100" height="61" />
   <p class="news-text">October 14-15, 2014</p>
      <p class="news-text">Moody Gardens Convention Center</p>
      <p class="news-text">Galveston, TX</p>
      <h2 class="meeting"> </h2>
      <h2 class="meeting"><a href="http://www.astm.org/MEETINGS/filtrexx40.cgi?+-P+TERM+D02+searchresults.frm">ASTM D02 2014</a></h2>
   <img class="news-image" src="images/news/Sheraton San Diego.jpg" width="100" height="61" />
   <p class="news-text">December 7-11, 2014</p>
      <p class="news-text">Sheraton San Diego Hotel and Marina</p>
      <p class="news-text">San Diego, CA</p>
</div>
.rightside-text
{padding:0px; color:#172B61;}
.news-image {float:right; margin-right:10px; }
.news-text { padding:0px; color:#000;}

FBL5N - in Rule set - It is a Display customer line items

Dear All,
We observed that FBL5N - Display customer line items in Standard SoD rule set under function AR07 addressing a risk of S022.
Unless there are t-codes of FD03 or FB02 this t-code does not allow to change the payment terms of the customer.
We are having a challenge from the client that FBL5N is a display t-code and why it is there in rule set.
Has anybody came across this scenario? If yes, what is the underlying risk for this FBL5N independently.
Is there any SAP Note for this t-code like ME23N from SAP.
Thanks and Best Regards,
Srihari.K

Hi Christian,
We checked the authorization objects as well enabled in GRC rule set as below:
F_BKPF_BUK - Docume t Authorization document for company codes - 01 or 02 - Enable.
Inspite of this access, FBL5N cannot be used to change the document for payment terms and assignments without FB02 t-code
assignment in the role.
Independently FBL5N cannot be used for any change or create activity except Display customer line items.
Please advise
Thanks and Best Regards,
Srihari.K

Crystal report -How to display multiple lines in line chart?

Hi,
M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
Category(String).....year(Int).....graph_values(Int).....table_value(String)
Test.........................2006.......... -100............................(100)
Avg..........................2006..........20................................20
Median......................2006...........5................................5
Test..........................2007...........500.............................500
Avg...........................2007............90..............................90
Median.......................2007............45..............................45
M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
Cross tab expert-
Rows u2013 category
Columns u2013 year
Summarized fields u2013 Min of table_value
In Chart Expert u2013
On Change of - Year
Show values - graph values
In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
FYI u2013 using VS 2008 and crystal report assembly version 10.5
Urgent. Please reply soon.
Thanks
ThakurS

I got the solution.
In Chart Expert - I should use
On Change of -- Year, Category
Show values -- graph values
Thanks,
ThakurS

Is it possible to display fixed lines in the candlestick chart ?

Hi,
I have a nice candlestick flash chart using AnyChart integration kit.
I would like to display 3 lines in this chart, they are as follow and they return one value each :
SELECT SEUIL_HAUT FROM SITE_ECHELLE WHERE SITE = :p184_ename
SELECT SEUIL_BAS FROM SITE_ECHELLE WHERE SITE = :p184_ename
SELECT SEUIL_ALERTE FROM SITE_ECHELLE WHERE SITE = :p184_ename
You know these line represents limits.
I tried to add these values in the request below but nothing would appear. Do you have an idea how I could display these fixed lines ?
DECLARE
X VARCHAR2 (4000);
BEGIN
x := 'With S1 as (
SELECT DATE1, round(avg(VALEUR),2) OPEN, NVL(ROUND(MAX(Valeur),2), 0) HIGH,
       NVL(ROUND(MIN(Valeur),2), 0) LOW,
       NVL(ROUND(AVG(Valeur),2), 0) CLOSE
FROM   EVV_'||:P184_ENAME||'
WHERE DATE1 BETWEEN
       TO_DATE('''||:P8_DATE_DEBUT||'000000'', ''DD/MM/YYYYHH24MISS'') AND
       TO_DATE('''||:P8_DATE_FIN||'235959'', ''DD/MM/YYYYHH24MISS'') AND
       CLEF_VAR = (SELECT CLEF_VAR FROM SITE_ECHELLE WHERE
                   SITE = '''||:P184_ENAME||''')
       group by date1)
Select NULL LINK,
       to_char(n, ''DD/MM/YY HH24:MI''),
      NVL(ROUND(AVG(OPEN),2), 0) OPEN,
       nvl(round(max(HIGH),2), 0) HIGH,
       nvl(round(min(LOW),2), 0) LOW,
       NVL(ROUND(AVG(CLOSE),2), 0) CLOSE
FROM   (select to_date('''||:P8_DATE_DEBUT||''',''DD/MM/YYYY'') + (level-1)/
TO_NUMBER('''||:P8_ECHELLE||''') n
from dual connect by level <=
(select (to_date('''||:P8_DATE_FIN||''',''DD/MM/YYYY'')+ 1 - to_date('''||:P8_DATE_DEBUT||''',''DD/MM/YYYY'')) * TO_NUMBER('''||:P8_ECHELLE||''')
from dual
)) days
        LEFT JOIN s1 ON days.n = trunc(date1,'''||:P8_TRUNC||''')
GROUP BY n
order by n';
RETURN (X);
END;Thank you for your kind help.
Christian

Hello, Jacky, thanks a lot for your answer.
This is not exactly what I was thinking about:
I want that the planners can be informed in the BPS planning layout about about e.g. the date when material is available again.
There should be a text saying: "Material xyz is not available until Oct 1st, 2008"
Additionally, the user should have the opportunity to give comments on their planning data.
Any idea?
Thanks and best regards
Gerd

How to display multiple lines in a text box defined in steploop.

Hi,
I have a requirement to display data ( which is dynamic in nature. I determine data type,length etc dynamically) in a table format. I am using step loop for the same. I am facing a problem. Some field can be as long as 256 char long. Is there any way to display multiple lines in text box defined in a step loop so that I can display the complete string as one entity.
I can't use custom control as custom control can't be defined in a step loop or table controlI would really appreciate your help on this.
Regards,
Sanjeev

Hello Sanjeev
Perhaps it is possible to use a <b>mixed strategy</b> consisting of a classical table control (or, even better, an ALV grid list) where you display the first 250 character of the data and next to the table control you place a simple textedit control. When the user selects one of the text fragments in the table control the entire text will be displayed in the textedit control.
Regards
Uwe

How to display multi-line event in Ical

I read that you could display multiple lines of an event description in ical using Option-enter. This works...However, after I select "All Day" event, it reverts it back to single line display on my monthly view. I want to be able to print my ical Monthly View and I need the whole event description to display. Any suggestions?
I'm using ical 4.0.2

Hi,
I don't think iCal does this.
Best wishes
John M

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

When I upgraded to FF 3.6, the line in the FF header with file, edit, view, etc is no longer visible. What do i need to do to display this line?

When FF starts, the file, edit, etc line is not displayed. What do I need to do to display this line?
Bill
== This happened ==
Every time Firefox opened
== I upgraded to FF 3.6

'''''"...the file, edit, etc line is not displayed"''''': That's the Menu Bar; see below.
<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
<u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
<u>''Windows'' Method 2.</u> Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
<u>''Windows'' Method 3.</u> Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
<u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

How to display a line item in the billing calculation ?

Hi Experts,
My client requirement is to just display a line item in billing without affecting the total invoice amount. ( line item should just show up, no calculation should be included).
Regards,
Farooq

i agree on the rate step fr the calculation you would like to see the line item check the variant control, it usually has the option to write a line item. depending on the variant.
bobby r.

Display of "Line resource" in RRP4 output

Similar Messages

Maybe you are looking for