Display Temperature and Current in one chart
Hallo,
I am using two cDaq devices, NI9227 (Temperature) and NI9214 (current) with Signal Express 2012. I have tried to displayed both Data in on Chart, but without success. When I drag a current channel to the Temperature Chart a new Waveform Chart will be created. Is it possible to display both data in one chart?
Best regards,
Lars
As SignalExpress currently stands, scalars do not have timestamps, only waveforms. Please add your voice to support of this feature on this page. Thanks!
This account is no longer active. Contact ShadesOfGray for current posts and information.
Similar Messages
-
Display value and description of one field in alv grid
Hi Folks,
I want to display value and description of one field as one column in alv grid.
for example iam having Xfield = 01,02,03.
and 01 iam having text value as xxx,
01 xxx
02 yyy
03 zzz
Im report display the values are displaying as 01,02,03..
but i want to display it as 01 xxx,02 yyy, 03 zzz.
Please do needful.
Thx.Hi, swetha
You can do this with "concatenate".
example:
In you code check where you final internal table is getting filled up before that do this concatenate and then append it.
data t_text type string.
t_text = textfield
CONCATENATE 'Xfield'
t_text
INTO wa_workarea SEPARATED BY space.
cheers,
Bhavana -
How do I take a 4-piece chart design and merge into one chart?
How do I take a 4-piece design chart and merge into one chart?
But it can be done with Adobe Acrobat, or the PDF Pack online service.
-
Is there a way to display canvas and MathML in one page with Firefox 3.6?
I can use the canvas element in a HTML5 document with the current Firefox. I can also display MathML with a xhtml+math doctype. But I couldn't find a way to use them together in the same document.
I am aware that it works with the current Firefox 4 beta using a HTML5 doctype.A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25 -
Pie chart legend should display values and percents
Hi All,
Can any body suggest me how to display values and percent in pie chart legend.Thanks in advance.
Edited by: 997414 on Apr 1, 2013 11:25 PMHi,
I used this tag : <SliceLabel textType="LD_TEXT_PERCENT"/>
My full graph;
chart:
<Graph depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20" seriesEffect="SE_AUTO_GRADIENT" graphType="PIE"><LegendArea visible="false" automaticPlacement="AP_NEVER" position="LAP_BOTTOM" /><LocalGridData colCount="1" rowCount="{count(.//DSYATIRIMDAGILIMANA_ROW)}"><RowLabels><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="RAPORAD" /></Label></xsl:for-each></RowLabels><DataValues><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><RowData><Cell><xsl:value-of select="ORAN" /></Cell></RowData></xsl:for-each></DataValues></LocalGridData>
<SliceLabel textType="LD_TEXT_PERCENT"/>
</Graph>
I hope, It helps you since I figure it out in very very hard way.
This is the main reference : http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html -
How to show English and Arabic in one JTextPane
Hi,
Does anyone know how to display English and Arabic in one JTextPane? For English the orientation is left to right while it's right to left for Arabic. So the result might be like:
hello
سالتك ليتم الرد
bye Thanks!
Alex
Edited by: alex_46 on Aug 31, 2009 7:54 AM
Edited by: alex_46 on Aug 31, 2009 7:56 AMI think you should be able to do it like this (very psuedo):
set the pane type to html,
for your text, have a String with something like:
<html>
<div align="left">english</div>
<div align="right">arabic</div>
</html>I don't know the exact html for this but something like the above.
Then set the whole string into your pane.
patumaire -
Close the current UI and open another one
Hello everyone,
I've got the following code and I want to close the current window and open another one. When i use "System.exit(1);" it closes everything when I use "this.dispose()" it doesn't close anything what could I try to get this to work? any suggestions?
the code is:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
//public class Equip_or_Job implements ActionListener {
public class Equip_or_Job extends Frame implements ActionListener {
JFrame dFrame;
JPanel jePanel;
JButton choice;
JComboBox jeqid = new JComboBox();
public Equip_or_Job() {
//Create and set up the window.
dFrame = new JFrame("Work with Jobid or Equipid");
dFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the panel.
jePanel = new JPanel(new GridLayout(2, 1));
dFrame.getContentPane().setLayout(new BorderLayout());
//Add the widgets.
addWidgets();
//Set the default button.
dFrame.getRootPane().setDefaultButton(choice);
//Add the panel to the window.
dFrame.getContentPane().add(jePanel, BorderLayout.CENTER);
//Display the window.
dFrame.pack();
dFrame.setVisible(true);
Create and add the widgets.
private void addWidgets() {
//Create widgets.
jeqid.addItem("Chose by Job");
jeqid.addItem("Chose by Equipment");
choice = new JButton("Chose");
//Listen to events from the Convert button.
choice.addActionListener(this);
jePanel.add(jeqid);
jePanel.add(choice);
public void actionPerformed(ActionEvent event) {
String sel = (String) jeqid.getSelectedItem();
if("Chose by Job".equals(sel)){
InsertNewDates inj = new InsertNewDates();
//System.exit(1);
dispose();
else if("Chose by Equipment".equals(sel)){
InsertNewDates ineq = new InsertNewDates();
//System.exit(1);
dispose();
Create the GUI and show it. For thread safety,
this method should be invoked from the
event-dispatching thread.
private static void createAndShowGUI() {
//Make sure we have nice window decorations.
try {
UIManager.setLookAndFeel(
UIManager.getCrossPlatformLookAndFeelClassName());
catch (Exception e) { }
Equip_or_Job eorj = new Equip_or_Job();
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
thanks in advance :o)I'm not exactly sure what you want to do, but...:
dFrame.setVisible(false) hides the current Frame and the application is still running
Best reagrds, Marco -
Salary in the current month and the previous one
Hi
I have a table that stores payroll details like the following stracture
earn code
period from
period to
user_id
time
I want to do one report which displays both the salary of one employee in the current month and his salary is the previous one
Thank you for your helpyou might use the LAG-function to get the previous months salary. Hard to know, as you did not provide any information about your report and database versions.
-
Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.
[email protected] wrote:
Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.
The short answer is: "Yes, of course." But you are going to have to do the legwork and learn LabVIEW basics before we can offer meaningful help.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?
Welcome to Apple Support Communities
That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video -
I want to sign out of current apple id and into another one that I own but I no longer have access to my current email address so I cannot log out (It is with an internet provider who I have just unsubscribed with) This is on an iPhone 5S, on iOS 8.1.
That email address is still a valid Apple ID. If you do not remember the passcode, sign onto Manage your Apple ID (Apple - My Apple ID) with that email address, and then click on Reset Password. You will be asked to answer your Security Questions in order to reset the password. If you do not remember the answers to your Security Questions, contact Apple Support to reset them for you:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB -
Hi,
Here is my requirement, i have 7 parameters in my report(Site,Account,LOB,year,Month,WeekDay and Date_Filter),
and in my report i have one table and one Chart,
my requirement is the table in the report has to show the data for 6 parameters only i.e(Site,Account,LOB,year,Month and WeekDay).so the table has to consider only 6 parameters, and it has ignore the 7th parameter, table should not consider Date_Filter parameter.
And Chart has to consider all 7 parameters.
so, when we preview the report table has to show the data for only 6 parameters and chart has to show the data for all 7 parameters.
if there is a way to get this Please reply me ASAP, it is an urgent requirement.
Thanks in Advance,
NaveenHi Naveen,
Refer below link to create multiple datasets as suggested by Gnanadurai
http://technet.microsoft.com/en-us/library/ff714047(v=sql.105).aspx
Thanks
Swapna -
I'm about to purchase Lion. My husband and I each have a desktop, iPad and iPhone. We currently use one Apple ID for iPad/phone purchases. Can we purchase 2 copies of Lion with one Apple ID or do we have to use different Apple IDs for the purchase? If we use the different Apple IDs can we still use the same ID for all of our purchases.
And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install. Then copy that copy to any Mac you own where you want to install Lion. -
We currently have one AI subscription until August 2014 and one ID subscription until DEC 2014. i now wish to subscrive to Creative Cloud Complete and take up the $29.99 month offer. i understand that Creative Cloud Complete would supersede the single applications. How many simultaneous logins are possible?
One Adobe ID supports two activation of CC irrespective of the type (single/complete/Team). If you buy the complete CC with the same Adobe ID, it will allow to activate it two times though you you will be assigned space of single app cc + the complete CC.
You can buy the Complete CC with a different Adobe ID.
Regards
Rajshree
Maybe you are looking for
-
Changing Stage size at runtime
I have been poking around and not finding any info on this. What I want to do is change the height of the STAGE (not a MovieClip) based on which view I'm showing the customer at a particular time. For instance... I may have a thumbnail and a detail v
-
In Firefox the control bar is gray and the play button kind of fades into the bar. In IE, it looks like it is suppose to - dark grey/black control bar with a big blue circle (on the left) with a bright white arrow inside of it (making it obvious as t
-
This incompatibility occurred with the upgrade to Firefox 5.0. While instability was a problem with the earlier version of Firefox, at least I could use the previously mentioned toolbars.
-
Negative delivery costs not allowed
Hi Experts, In the below situation I am getting message like 'Negative delivery costs not allowed'.Please give your suggestions. There is a PO line item which I want to check the 'Delivery completion indicator' But when I am going to change mode of t
-
Build in OWB and make map in AWM?
Hi all, Would it be possible to design and deploy the dimensional objects (dims/cubes) using OWB and make a mapping to populate them using AWM? These are all MOLAP objects. The advantage of designing in OWB is the editor and e.g. the ability to add c