Display the name with help of f4

Hi Experts,
I want to display name of customer when i select customer no. with F4 in dialog program.
Best Regards.
Pravin

Hi,
see this code.
TABLES:kna1.
data:BEGIN OF itab OCCURS 0,
  kunnr like kna1-kunnr,
  name1 like kna1-name1,
  END OF itab.
SELECT-OPTIONS:s_kunnr for kna1-kunnr.
AT SELECTION-SCREEN on VALUE-REQUEST FOR s_kunnr-low.
SELECT * from kna1 into CORRESPONDING FIELDS OF TABLE itab UP TO 20 rows.
  CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
*     DDIC_STRUCTURE         = ' '
      RETFIELD               = 'KUNNR'
*     PVALKEY                = ' '
     DYNPPROG               = sy-repid
     DYNPNR                 = sy-dynnr
     DYNPROFIELD            = 'S_KUNNR-LOW'
*     STEPL                  = 0
*     WINDOW_TITLE           =
*     VALUE                  = ' '
     VALUE_ORG              = 'S'
*     MULTIPLE_CHOICE        = ' '
*     DISPLAY                = ' '
*     CALLBACK_PROGRAM       = ' '
*     CALLBACK_FORM          = ' '
*     MARK_TAB               =
*   IMPORTING
*     USER_RESET             =
    TABLES
      VALUE_TAB              = itab[]
*     FIELD_TAB              =
*     RETURN_TAB             =
*     DYNPFLD_MAPPING        =
*   EXCEPTIONS
*     PARAMETER_ERROR        = 1
*     NO_VALUES_FOUND        = 2
*     OTHERS                 = 3
  IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.
rgds,
bharat.

Similar Messages

  • Display of Name with Number of the calling person

    Hi all
    I have purchased a new NOKIA X2 as this is my first Nokia set I have noticed that when a person in my contacts list calls me the persons name only is displayed & not the number from which he is calling. As I have entered mobile number , work number & home number in the persons contact details. Plz. help

    @ jithin_009
    when u entre several nos for one name only the name is displayed when u recieve a call from either of the nos.
    if u wants to get the name with each no. entre the name with slight modification with the no as several entries.
    example.  jean office  - 011234567
                             jean Home - 011233333
    if u entre as above then u will get what u want.
    also remember if u entre same contact name with different nos, u will see only the specific no.   
    example   jean  - 011234567
                             jean  - 011233333
    now when u get a call from either no. u will see only the number, not the name
    check this and see the results
    cheers
    PS: if this information is helpfull please click the white star on green background

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • Displaying the name of a minimum value in crosstab

    Hi,
    we have a crosstab with [Job Number] in the left column, [Quantitiy Break] as the column headers and (min[bid value]) as the measure.
    We want to display the name of the [vendor] who gave the minimum bid alongside the measure in the crosstab.
    we have tried allsorts of formula along the lines of:
    =[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row])))
    =[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row] ForEach ([Job Number]))))
    =[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row] ForEach ([Job Number];[Quantity Break]))))
    etc
    can anyone help?
    thanks very much
    Keith

    You could try the method I use to pull this back from the database in one go...
    Create an object
    start with bidvalue (aggregated on the right level, formatted as string,
    make sure you use leading zeroes and room enough for the highest possible value)
    and concatenate the vendor after that.
    Now use right(min(new object);lenght(new object)-length bidvalue string)
    (might have tweak a bit to get the exact vendor part of the string, this is from the top of my head,
    but no doubt you'll get it to work)
    This will find the combination with the minimum bidvalue, but only return the vendor part.
    Hope this helps,
    Marianne

  • How to display the name of my metric in a PivotTable.

    Hi I am working with OBIEE Plus
    How to display the name of my metric in a PivotTable.
    Why when I add a field to the sector of the measures in a PivotTable field name disappears.
    Help please
    Thanks beforehand

    Where are your 'measure labels' ? These show what the metric is.

  • How Can I Display the Name of iPhoto Library?

    I manage a huge number of images so I keeep them in their own iPhoto libraries. In order to change libraries, I have to rename the one I have just left and then restart iPhoto. I have looked for years but cannot find a way for iPhoto to display the name of the library it has open. I could remember the names of all my libraries if I was not forced to change them in order to leave them and go to another. Does iPhoto tell you the name of the library you have open?
    Thanks
    20"iMAc G5   Mac OS X (10.4.5)  

    Hi John,
    iPhoto 6 now shows the name of the library in the title bar of the iPhoto window. At least it did the other day for me.
    You can have a unique name for each of your libraries and use the Option key to launch iPhoto and choose to open another library, then navigate to the library, highlight it and click open.
    You can also use one of the iPhoto Library managers to switch between libraries.
    iPhoto Library Manager
    iPhoto Library Manager documentation
    this page will show you everything you can do with iPhoto Library Manager.
    You can also try iPhoto Buddy

  • Displaying the name of iPhoto library

    I have a large number of different iPhoto libraries, and was wondering if there was some way to display the name of the Library in use. I have given them all different names, and can usually tell which one I am in, but not always.
    iPhoto insists on calling each one "Library" in the information pane. I've looked through the responses to this question in the iPhoto 5 section (i.e. "can't do it") but, now that iPhoto offers multiple library support, you'd think this would be addressed.
    Th causes of my problem are twofold: 1) I often duplicate libraries and then split them by deleting different film rolls from each and 2) I'm getting old, and my memory is not what it once was, so I tend to forget which of the two libraries I've opened and which files should be deleted.
    Any suggestions?

    luba:
    Yes if you use iPhoto Library Manager to manage your multiple libraries as you can see here. iPLM adds the library title to the top of iPhoto's window when you go thru iPLM. It will also let you copy albums or rolls between libraries and keep the keywords and comments like this.
    I have my workflow setup to always go thru iPLM so I always know exactly which library I'm opening. My memory isn't good enough to remember the last one I had opened.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Creating a Folder Within Form or Document Library & Display the name not in the name column.

    I have created a form library that will used to create folders within that. The folder creation is done using an InfoPath Form that has been uploaded to the Form Library. When the new folder was created the name will be displayed at the Name column within
    the Form Library. I want to change that to another column like documents or suchlike.
    Can it be done using InfoPath 2010 VSTA C# or not? If their are other options available please could you try to inform me!
    Thank You,
    Chiranthaka

    Hi,     
    If you want to show the name of folder in another column, a workaround is that you can create an extra column, then create a SharePoint Designer workflow to set the value of
    this column with the name of folder.
    Here is a link about Create Workflow using SharePoint Designer and set field value for your reference:
    http://www.codeproject.com/Tips/419037/Create-Workflow-using-SharePoint-Designer
    I have seen a similar post from you in the link below:
    http://social.technet.microsoft.com/Forums/en-US/c3ff3f17-dbe2-40f9-86c5-ff7d4b663f09/creating-a-folder-within-form-or-document-library-display-the-name-not-in-the-name-column?forum=sharepointcustomizationprevious
    It's recommended that you post a single question in a single thread which will make it easier to be discussed by others.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Display the name of the person who creates (prints) the report

    I have designed a report 'template' for other people to use.
    I would like a field in the report which displays the name of the person who uses the report template to display data from the database.
    The field in the Special Fields drop down menu called 'file author' does not work.
    Can anyone suggest what I should use?

    Try inserting one text object stating "Designed by XXXX" at the footer before creating a template so that when ever the template is used for a report the text object will be printed with that Description
    Raghavendra

  • HT201436 how do I get my iphone 4 to display the name of an incoming caller? It just stopped working,thanks

    How do I get my iphone 4 to display the name of an incoming caller?  It just stopped working all of a sudden.

    I suggest contacting your carrier, typically if there is an issue with caller id its an issue with the carrier.

  • Bank transfers: the file DME doesn't display the name of the company

    Hi all,
    In the DME file created by t.code F110, the record 20, doesn't display the name of the company which orders the bank transfer.
    Where should I put it?
    Thanks

    Neeraj,
    Its ECC6.0 and I upload the file by going into their website and putting userid and password and then upload the fiel over there and click send.Is there any possibility the file contains any hidden characters which we dont see? where should I send you dummy file whats your email id.
    Regards
    Shaun

  • Display the name of the connection point

    Hi,
    I would like to display the name of the connection point added via shapesheet to be displayed on the shape as part of the shape text. Is it possible in Visio?
    Thanks,
    Rohit

    You will probably have to write a macro (vba) to accomplish that.
    al
    Al Edlund Visio MVP

  • How do I get character viewer to display the names of the radicals in Japanese, as they were until Lion

    In Leopard, Character Viewer displayed the names of the radicals of Japanese characters in Japanese.
    Now I have Lion, the radicals all have English names which are totally different and impossible to search phonetically. I can't find a way to choose the language of the Character Viewer. Do I have to set the whole iMac to use Japanese as its basic language? That would be a pain for everything else.
    Thanks for looking.

    If you put Japanese at the top of the Langauge tab list, but do not logout/login, then only newly opened apps will appear in Japanese.  That way you can get only Character Viewer in Japanese.   Maybe this will also work
    http://www.tj-hd.co.uk/en-gb/languageswitcher/
    Another approach would be to open the Character Viewer app and modify its .lproj folders.
    If you still have a copy of Leopard, you may be able to transplant its Character Viewer app to Lion and use it as an independent app.

  • Times and Times New Roman Do not display the same with ADE pdf reader

    Anyone an idea why?
    (These fonts display the same with MS word and Adobe Acrobate reader)

    That looks like a grunged version of Times New Roman. You probably have this font installed, and it's likely conflicting with the standard Times New Roman font.

  • When my Firefox language settings are fr_fr or fr_ca Firefox does not display the e with acute accent character correctly when it is displayed in a javascript alert box. However, it does display it correctly when my language settings are just fr. Please t

    Firefox does not display the e with acute accent character correctly from a javascript alert box when my browser language settings are fr_ca or fr_fr. However, it does it correctly when my browser language setting is fr. How do i get it to display e with acute accent and other iso8859 characters correctly in a javascript alert box when my browser language settings are fr_fr and fr_ca?
    == This happened ==
    Every time Firefox opened

    Use Unicode (UTF-8) for those characters.
    Then you will always be sure that they are displayed correctly.

Maybe you are looking for