Displaying Custom fields created by EEWB

Hi,
I would to get advice on how to display fields created by EEWB in a seperate tab.My assignment is to create a new tab in the Business activities transactions.Using the EEWB, I created a project by choosing the Business Object as BUSINESS_ACTIVITY and the extension type as ACTIVITY_H.I chose the business category as business activity. I defined the fields and the object was generated successfully.
Now the new fields are added in the table CRMD_ORDERADM_I.
1.I would like to know if the above process was right towards the creation of fields in the Business Activity transactions.
2. If the above is correct, could you please tell how to get the tab and the fields to be displayed in the activities screen.
Regards
Rasheed

Hi,
For displaying the EEWB fields in a separate TAB following is the procedure:
1. First create the set type for the fields which you want to display in a separate TAB.
2. Now through EEWB create the project and extension for your transaction and add the component at header or item level based on youir requirement.
3. Then create a view/TAB .
4. After this create an enhancement profile for your component.
5. Assign your enhancement profile to the item category.
Let me know if you need furhter details on the same.
Allote pnts if helps.
Cheers.

Similar Messages

How to fill values to custom fields created by EEWB

Hi All,
I am working in CRM 5.0,We have extended the BP transaction with two new fields using EEWB transaction.
ZZABC
ZZDEF
Here goes my problem , i wanted to update data to the new fields using FM.
I tried using BUPA_CENTRAL_CHANGE,where i found the structure of the custom fields .But the FM is working for standard fields but not for Custom fields.
Following are the FM generated in EEWB.
ZZG05_BUPA_EVENT_DINP2
ZZG05_BUPA_EVENT_DLVE1
ZZG05_BUPA_EVENT_DSAVB
ZZG05_BUPA_EVENT_ISDST
ZZG05_BUPA_EVENT_ISSTA
ZZG05_BUPA_EVENT_XCHNG
ZZG05_BUPA_PAI_ZG050100
ZZG05_BUPA_PAI_ZG050101
ZZG05_BUPA_PBO_ZG050100
ZZG05_BUPA_PBO_ZG050101
I have tried using the above FM.But didnt work.
Can you please help me how to proceed just to fill values using FM.
Your suggestions will be highly rewarded.
Thanks,
Gayathri.

Hi Shiva,
Thanks for your response.
I have specified the FM that are generated while creating the fields, where i dnt find any update or delete.
Further can u explain "you can play with screen config in the AREA MENU code BUPT".
My requirement is to upload data to those fields through pgm for one time.
Thanks,
Gayathri.

Reusing fields created via EEWB

Hello,
I have a new field , on the Opportunity Header, created via EEWB ( we were on CRM 2007 when this was done) and I would like to re-use this field for display in a follow up Sales Contract created from the Opportunity. It looks as though I can create a new Model Attribute on the Context Node BTADMINH for component BT121H_SLSC, view BT121H_SLSC/Details and enter the BOLATTRIBUTE , through the relationship path BtAdminH-->BTHeaderopportunityext-->BTOpportH-->Attributes and this field can be selected, but I was wondering if there is another way to achieve this via the AET tool, it looks as though fields create via EEWB cannot be edited in AET
Regards
Chan

I agree on the option to enhance a "higher" segment and populate the value during the copy control (ORDERADM_H) is a better solution, but only if you can get rid off the field in the OPPORTUNITY_H (I assume the custom field is there) otherwise you will have the field duplicated, not nice IMHO
I don't see a bad approach to enhance the webui with a value attribute to populate the value of the previous transaction either.
About coding, I'm afraid I can't help it here, I mean, sure I can copy paste the code but I believe in:
"Give a man a fish, and you feed him for a day; show him how to catch fish, and you feed him for a lifetime"
I can't teach you about BOL, but SCN is full of posts/blogs/documents which can teach/guide you "how to fish", come back to me when you have a more philosophical question and I will be more than happy to help you (or at least try to)
Cheers!
Luis

Enable a field created by EEWB

Hi Experts,
Can you please help me on how to enable/disable a field created by EEWB transaction. We have done an enhancement to the BP master date through EEWB, and we need enable some of these fields. Kindly help on this.
Regards,
Basheer

Hi,
My understanding is, you have created a field by EEWB and trying to enable that field in UI. If I am not wrong, you can add the created field from available fields to displayed fields with the help of the Tcode: BSP_WD_CMPWB.
Steps to be followed:
1. Tcode: BSP_WD_CMPWB
2. Enter the Component ID
3. Go to Views and select the relevant view in which you have created the field by EEWB
4. Click on Configuration tab
4. Click on Copy the configuration ( do not make any changes in standard one)
5. Click on Edit
6. Click on show available fields
7. Move the created field from Available fields to Displayed fields and Save.
Hope it helps you.
Regards,
Maddy

Display Custom Fields in a SharePoint 2010 Content Query Web Part?

Using SharePoint 2010, Having Custom List With 4 Columns, Now I am Using Content Query Web-part To Display List Data ,But Currently It Display Only First Column, SO How to Display Custom Fields in a SharePoint 2010 Content By Query Web Part
AKshay Nangare

Hi,
By default CQWP shows only one column. However, if you want to show more than one column, then CQWP needs to be customized. The property which you are looking for is CommonViewFields. It is used to specify the additional fields that you want to display in
the Web Part. See this for more information:
https://msdn.microsoft.com/en-us/library/ms497457%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

How long does it take for the custom field created in SFDC to show up in the field mapping list?

How long does it take for the custom field created in SFDC to show up in the field mapping list? I hit the refresh field button, but it is not showing up after 5 min. Do I just need to have patience?

Hi,
What do you have to do to the field in SFDC to make it accessible so that it shows up in the Eloqua field mapping area as a field to be mapped?

2 Custom Fields-create and display

In addition to the standard fields available within the Whou2019s Who service, we need to create and display 2 custom fields within the employee search functionality in ESS.
Can someone walk me through the steps please?

Hello,
There are 2 sections of search available.
1 is normal search and 1 is advances search.
Well for advanced search you can very much follow my earlier reply.
And you can also have a look at below thread...
ESS Who is Who - Add search criteria
I guess you want to add extra field in normal search.
I am not sure how to do it....as Siddharth (In link I pasted above) says that he himself have never seen any changes in normal search.......
But still you can give below method a try.....
http://wiki.sdn.sap.com/wiki/display/profile/ESS%2bPersonal%2bInformation%2bUI%2benhancement%2bwithout%2bmodification?bc=true

F-47( down payment request) : how to display custom fields ?

Hello every body,
Can you help with this problem?
Actually, in my project we created custom fields that appear in the PO (ME21N), the MIGO and the MIR7 and MIRO transaction.
Those fields are in the BSEG table but my problem is that I can't display them on the F-47 transaction.
So can you help me make those custom fields appear in F-47 ? Please help me I am so desperate now...
Thanks in advance.
Regards,
Aminata
PS : We are using ECC 6.0

Dear Srilatha,
Actually all the solutions are welcomed :-).
Can you be more specific about the BAdi/Screen Exit ? Because I have tried to seek into the system if there were some exit but I found nothing...
Thanks in advance for your help.
Aminata

Change field attributes of fields created using EEWB

Dear SAP gurus,
we have extended our complaint transactions by adding some 'customer' fields using EEWB.
Now, the program name for this extension is: SAPLZCRM_BTX_EEW_UI02
and the screen number where those fields are is "0100".
The screenfield is for example ZCRMT_0100_BTX_UI02-ZZPO_REF_NO
Now the field is general available for every Complaint transaction.
My questions are:
1) Suppose I want to make this field Output Only
is this done via the screenpainter using:
Program name:SAPLZCRM_BTX_EEW_UI02 and Screen: 0100
(Since I am not sure you are allowed to change the screens generated by the EEWB).
2) I would like to make this field input/output (but only for 1 transaction type XX) and not for the other complaint transaction type YY. Where can we built in this check?
thanks for a quick response
cheers
davy

Hi,
Simple solutions:
| 1) Suppose I want to make this field Output Only
| is this done via the screenpainter using:
| Program name:SAPLZCRM_BTX_EEW_UI02 and Screen: 0100
| (Since I am not sure you are allowed to change the screens generated by the
| EEWB).
--> Yes very much you can change the field attributes. tHis can be done thru SE80
| 2) I would like to make this field input/output (but only for 1 transaction type XX)
| and not for the other complaint transaction type YY. Where can we built in this
| check?
--> There are 2 ways of going about it:
1. create a PBO module and check the Transaciton type and depending on that you can grey out the fields at runtime
2. Keep the fields as input/ output and write BADI CRM_ORDER_FIELDCHECK
and method FIELDCHECK. Here you can say wchich field is to be greyed out dpepending on Transaction type
Hope this helps
Kindly reward with points in case helpful
Sharif

Transfe new campaign fields created by EEWB to R3 project

I have created a new field for Campaign using EEWB. Does anyone know how to move the custom field to the project created in R/3 through ERP transfer ( Online & middleware) ? Thanks.
Philip

It is not supported by the standard middleware transfer. I use a work around method to do it.

Displaying Custom field in shopping cart header

Hi all, I know how to add a field to header and item levels of the shopping cart.
- In the note 672960 it says 'Note that the header fields cannot be displayed for the shopping cart. If you define fields on the header, they can only be filled in BADIs.'
However,
We are able to fill in the name of the shopping cart on the third step, which is also a part of header information. Is there a possibility to add a custom field(the user must be able to fill it) and display it in that screen???

Hi
To add custom fields to the shopping cart, please try this process ->
Please refer to these links for details ->
Re: SC header CUF ?
Re: MAP USer SRM defined fields in backend for PO
Re: HI SRM experts...
Custom fields to a Bid Invitation
Addition of custom fields in Contract and mapping it with the fields in SRM
urgent help request - How to add custom fields to header BID.
Re: Add custom fields to Contract Transaction in SRM 4.0
Custom Fields
custom fields in Carry out sourcing screen..
Custom Fields Not Display In Basic Data In SRM 5.5 Server..
SC : Extended Search on Header Customer field
Re: customer field in 3rd step of shopping cart
Adding fields in shopping cart
Custom Field in the header of Shopping Cart
Please refer to these SAP OSS notes ->
Note 458591 - User-defined fields: Preparation and use
Note 672960 - User-defined fields 2
Note 822424 - CUF. Customer fields cannot be changed in the bid
Note 809630 - Customer field in bid invitation and bid - How does it work?
Note 809628 - Table like customer fields from bid invitation in bid
Note 798731 - Bid: Bid Inv. Customer fields not visible
Note 762984 - SRM40-SUS: Implementation of customer enhancement fields
Please go through the documentation of following 3 Business Add-Ins using SE18 transaction.
BBP_BUPA_GET_CUF Customer Fields for Vendor Master Data
BBP_CUF_BADI-Customer Fields. Call-up of User-Defined Screen
BBP_CUF_BADI_2-Customer Fields. Use of Standard Table Control
Hope this definitely help.
Regards
- Atul

How to delete a custom field created in Address Book template?

It is possible to create a new custom field name in any of the pop-up field categories in the preferences template for Address Book.
But, once created, there does not seem to be a way to delete or edit the newly created custom field name. That doesn't make sense.
Tell me that I am wrong, and then tell me how to delete or edit a custom field name. Thanks!!

Thanks Pascal, I can change the viewed template field areas as you have described. My problem was with modification of the pop-up list entries: adding, deleting, and renaming user created custom field entries. I have since figured out how Address Book allows these functions; unfortunately, that specific information is not present in the Address Book help file.

Adding Custom Fields in ME53N

Hi All,
I need to add a custom field to display data in the Tx. ME53N, "Status" tab.
Do you know any screen exit or badi for this requirement? I only need dsiplays the field added to the EBAN table.
Thanks in Advance!
Regards,
Martin.

1. create your custom fields via structure CI_EBANDB.
2. Use badi ME_PROCESS_REQ_CUST to display custom fields created in CI_EBANDB
PS You can find a detailed documentation in badi ME_PROCESS_REQ_CUST thru SE18
a®

Runtime error in CRM_DATAEXCHG_BADI after adding customer fields using EEWB

Hi gurus,
I am getting short dump in ZCL_IM_EEW_DATAEXCHANGE06~CRM_DATAEXCH_AFTER_BAPI_FILL.
I've added 3 custom fields in ORDERADM_I structure using EEWB. ( created in ECC also ).
Now when i create a sales order, its not flowing to ECC as i am getting the below error.
UC_OBJECTS_NOT_CONVERTIBLE
Error occured while executing below statement
MOVE <ls_bape> TO ls_bapiparex_wrk+lc_offset.
<ls_bape> is having all the custom fields i've created using EEWB.
Error short text i am getting in st22: ' Data objects in Unicode programs cannot be converted.'
Kindly help.
regards,
Arun N K.

Hi Robert,
Thanks for the reply.
I was not able to use move-corresponding as there was no matching fields in the destination structure.
Anyway we found out the issue. One of the custom fields generated using EEWB, used INT4 data element. I deleted the field and created it again using character (NUMC) data element, and it worked fine.
I still don't know the exact problem of using integer data element. Kindly share if anyone find the reason.
Thanks,
Arun N K.

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

Displaying Custom fields created by EEWB

Similar Messages

Maybe you are looking for