Displaying HDV 1080i50 .mov file in FCE captured with Final Cut Pro

Hi
I cannot display (in Final Cut Express) a clip in a .mov file that contains HDV 1080i50. The file was created on a different Mac computer running Final Cut Pro. The source was a Sony Z1 camera. No hardware card was used.
I get the error message in FCE - "Codec not found. You may be using a compression type without the corresponding hardware card"
Can Final Cut Express work with HDV 1080i50 created from FCP?

You didn't say what format the video was, but you can use MPEG Streamclip to convert that video to something that works in FCE.
The important thing is that you'll want to match the settings you convert this video to so that it matches your timeline settings. This will make everything much easier to work with and eliminates the need to constantly render the timeline.
Do you have other content you are going to be working with in addition to just this one clip? If it's just this one clip, you will probably want to use the "Easy Setup" settings of HD, AVCHD-Applie Intermediate Codec 1920x1080i50. You'll want to use MPEG StreamClip to convert that video to matching settings -- specifically tell it to convert to AIC (Apple Intermediate Codec). If you have other media/clips you're working with in addition to this one, you'll then need to decide what format you want to use for the timeline and Easy Setup. If you post those details, we can try to help out.

Similar Messages

  • Can I capture with Final Cut Pro and edit in Premiere Pro?

    Since it appears that Premiere has issues with capture - at least for me but as I see it for others as well - and that I can capture with iMovie, can I consider using Final Cut Pro for capture - then cross to Adobe Premiere and the suite for editing, finalizing ? Or is there a problem to copy the shots/files from one program to the other (would they remain identified clearly so I could just import shots into Premiere afterward ?)
    Thanks
    Rob

    Hi Rob,
    When you capture HDV in FCP it creates a specific Apple HDV codec. This is a codec that is only available if FCP, Motion or Compressor is installed.
    The two workarounds would be to use Premiere Pro on the Mac with one of the above mentioned apps installed on the same system or convert to a codec that can be read in Premiere.
    Best,
    Peter Garaway
    Adobe
    Premiere pro

  • Capturing with Final Cut Pro with the Sony Z1

    Hi there,
    Can anyone help. I have been trying capture video live from the Sony Z1 while filming and also capturing from a VTR deck while it is recording. The problem that I am having is that the cPTURE WINDOW CANNOT SEE THE TIMECODE COMING IN and therefore it captures a few frames and then comes up with an error, either searching for timecode, or dropping frames.
    Any help would be appreciated as I am trying to save a lot of time by capturing a conference directly into Final Cut instead of recording to tape and then capturing all the tapes again, when you have a 4 day conference this is a lot of hours.
    Any ideas anyone.
    Many thanks

    Use easy setup for HDV then start camera then Capture Now from log and capture but you will not get timecode. Also make sure to check the "limit capture now" settings because space will be reserved. If you know each speaker is 1/2 hour, set it for an hour and you should be fine.
    What output settings did you set the Z1 up with? What computer and version of FCP?

  • Problem capturing with Final Cut Pro 5.0

    I seem to have a problem capturing to my new macbook with FCP 5.0 installed. I know how to capture and I've done it a million times before but this is the first time with this Mac.
    I'm capturing from my MiniDV camera via firewire. I've checked if my scratchdiscs have enough room and it has plenty (250gb).
    Everytime I go to capture, a box comes up that says "General Error" with no error code. I have no idea what I'm doing wrong or what's wrong. Any help would be greatly appreciated.
    Thanks in advance.

    Same problem with me. J just bought a macbook pro 2,33 Hz.
    When I capture on my FCP 5.0.4 there is no problem but when I push the " esc" button to close the capture he FCP crashes. Help me I bought the Macbook pro to edit on location and now I can't capture.
    I use a DSR11 of sony to capture. Fire wire input (SD PAL)
    Even I use a XD-cam same problem no capture.
    HELP ME PLEASE !!!

  • Can you burn multible movies on one bluray dvd disc with final cut pro

    how to burn two completed quick time movies to blu ray dvd with final cut pro? Ive tried but wont play

    Mark,
    Welcome to the wild and wacky world of DVD's and Mpeg2!
    Here are a few things that might help.
    it seems to want everything as a QT. This presents size limitations.
    Not really, iDVD simply takes the QT files that you feed it and uses its own compressor to encode them to mpeg2 files. As long as your source material is not over 2 hours iDVD can handle it.
    I'm planning to export from fcp using Compressor in the hope of fitting everything onto one disc
    You can do this, but you might find it simpler to simply export a QT reference movie from FCP and drag that into DVDSP. DVDSP will then use compressor to create the mpeg2 files that you need. I say this because some find compressor a little intimidating at first. (I know that I still do.)
    Now, go find the manuals that came with your software and start reading, DVDSP is a powerful program and the manuals are the best place to start.
    Good luck!
    K

  • Are microsoft movie maker files compatible with final cut pro files?

    I would like to know if microsoft movie maker files are compatible with Final Cut Pro?
    Thanks,
    elemir

    depends on how you're outputting. .wmv I don't think so.That's pretty much a dead end format.  mp4 might be, but i'm not sure if movie maker outputs them. .avi might be, depends on the codec used.
    Avoid .wmv, apple products don't play well with that format (never have) and aim for some other output type. Then on your mac, if you don't already have it, if you don't already have it, get the free converter mpegstreamclip and see if it can convert your movie maker output into something final cut will input. DV files are good, as are .mov files.

  • Following Media Files Are Not Optimized For Final Cut Pro

    I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
    I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
    1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
    2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
    I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
    Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
    Thank you,
    Crayton

    I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
    I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
    - I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
    - I rendered them in Premiere, then transfered the rendered AVI file to FCP.
    - When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
    - Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
    - Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
    Did that make sense?
    Thank you again,
    Crayton

  • Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7

    Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7
    I just installed the new version of final cut pro 10 and the canon plugin-E1 version 1.4 for the canon 5D mk III but after starting final cut pro I can not find the Log and transfer button., with the result I cannot import my files.
    Is there a solution for this problem.

    There is no L&T function in FCPX.
    The import media dialogue window does what you want.
    OS versions later than 10.6 should be fine importing Canon DSLRs.
    Russ

  • How can i make a picture from a video file with final cut pro x?

    how can i make a picture from a video file with final cut pro x?

    Go to the "share" menu, select "save current frame"

  • Issues Capturing with Final Cut Express

    Hi
    I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

    When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
    Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
    Have you used the Thunderbolt port successfully with other Thunderbolt devices?
    I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
    http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
    MtD

  • Can I share files from other programs or just Adobe apps files. I work with Final Cut and Premiere X

    Can I share files from other programs or just Adobe apps files. I work with Final Cut and Premiere X.? Need to share files up to 6GB.
    I need to know if the 20 gb limit is about all that I share, or if it's just about whatis in the clouds. If I take, recover my limit?
    The speed of upload e download is good?

    The Creative Cloud file storage could be used for video assets but speed and performance might vary based on location. I would suggest you testing it out yourself using your Adobe ID before subscribing. Performance would not change after you joined.
    -Dave

  • I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

      I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

    My HVR-A1U was able to capture just fine.  The only issue I had is that it has mroe frequently than FCP 7 ever did find Timecode breaks and split my clip apart.  I never had breaks before, so while it is possible I had them on this latest tape, I think X is just more picky.  I mean heck, it found three in a one minute timeframe.  My A1U worked with X without me needing to adjsut any settings form how I had it setup for 7.

  • TS1846 I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences.  So, where could be the file ?

    I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences.  So, where could be the file ?

    Digital Rebellion has you covered: http://www.digitalrebellion.com/prefman/

  • I get this message often with final cut pro 7 "Autosave: File Error: Unknown file?

    I get this message often with final cut pro 7 "Autosave: File Error: Unknown file?

    Is you're autosave folder on a drive that's not formatted macosextended?  You set the location for the autosave folder in system settings which can be found in the FinalCutPro Menu.  Also, the best way to trash fcp preferences is using Digital Rebellion's Preference Manager
    https://discussions.apple.com/docs/DOC-2491

  • Removing FCE but leaving Final Cut Pro

    I have both Final Cut Express and Final Cut Pro installed on my computer. I no longer use Final Cut Express. I downloaded the program "FCS Remover". Apparently it will remove both FCE and Final Cut Pro. There is no option to only remove one of those programs. Is there a way to remove only FCE while leaving Final Cut Pro on the computer? I would also like to remove Soundtrack but keep Soundtrack Pro. I guess if all else fails, I can remove both programs and then reinstall Final Cut Pro.

    Here is an Apple Knowledgebase article that includes instructions on manually removing FCE. Pretty straightforward.
    There is also a more detailed but older set of Apple instructions for removing FCE. Still applicable for FCE 4. Note, however, that since you have FCP also installed, if you follow this document, you should be careful NOT to remove items that may also be in use by FCP. They'll be pretty obvious.

Maybe you are looking for