Displaying report using decision step

Hi ,
in the decision step .i am calling the custom report in the methods before workitem execution. when i execute the workitem from the inbox first it is displaying the report after i click back button ( or cancel) button the report is displaying again. I am not getting why program is displaying the report again.
this is code :
BEGIN_METHOD REPORT CHANGING CONTAINER.
SET PARAMETER ID 'BES' FIELD OBJECT-KEY-PURCHASEORDER.
CALL TRANSACTION 'Y0024' and skip first screen.
END_METHOD.
please can any one help in solving the problem.
advance thanks
paveee

Hi Paveee,
Search this forum. I think this problem has been addressed before.
By the way, you have a question similar to this still open if that question is answered, please close the thread by marking it answered.
Regards,
Martin

Similar Messages

Is it possible to put colors while displaying report using ALVs?

Gayathri

hi
i think the following code is the ur solution
TABLES VBAK.
TYPE-POOLS SLIS.
* Data Declaration
TYPES: BEGIN OF T_VBAK,
      VBELN TYPE VBAK-VBELN,
      ERDAT TYPE VBAK-ERDAT,
      ERNAM TYPE VBAK-ERNAM,
      AUDAT TYPE VBAK-AUDAT,
      VBTYP TYPE VBAK-VBTYP,
      NETWR TYPE VBAK-NETWR,
      VKORG TYPE VBAK-VKORG,
      VKGRP TYPE VBAK-VKGRP,
     <b> LINE_COLOR(4) TYPE C,</b>
      END OF T_VBAK.
DATA: IT_VBAK TYPE STANDARD TABLE OF T_VBAK INITIAL SIZE 0,
      WA_VBAK TYPE T_VBAK.
* ALV Data Declaration
DATA: FLDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
      GD_REPID TYPE SY-REPID.
*      I_EVENTS TYPE SLIS_T_EVENT,
*      W_EVENTS LIKE LINE OF I_EVENTS.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BLD_FLDCAT.
PERFORM BLD_LAYOUT.
PERFORM DISPLAY_ALV_REPORT.
* Build Field Catalog for ALV Report
FORM BLD_FLDCAT.
FLDCAT-FIELDNAME = 'VBELN'.
FLDCAT-SELTEXT_M = 'Sales Document'.
FLDCAT-COL_POS = 0.
*FLDCAT-EMPHASIZE = 'C411'.
FLDCAT-OUTPUTLEN = 20.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERDAT'.
FLDCAT-SELTEXT_L = 'Record Date created'.
FLDCAT-COL_POS = 1.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERNAM'.
FLDCAT-SELTEXT_L = 'Cteated Object Person Name'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'AUDAT'.
FLDCAT-SELTEXT_M = 'Document Date'.
FLDCAT-COL_POS = 3.
FLDCAT-EMPHASIZE = 'C110'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VBTYP'.
FLDCAT-SELTEXT_L = 'SD Document category'.
FLDCAT-COL_POS = 4.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'NETWR'.
FLDCAT-SELTEXT_L = 'Net Value of the SO in Document Currency'.
FLDCAT-COL_POS = 5.
FLDCAT-OUTPUTLEN = 60.
FLDCAT-DO_SUM = 'X'.
FLDCAT-DATATYPE = 'CURR'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKORG'.
FLDCAT-SELTEXT_L = 'Sales Organization'.
FLDCAT-COL_POS = 6.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKGRP'.
FLDCAT-SELTEXT_M = 'Sales Group'.
FLDCAT-COL_POS = 7.
FLDCAT-EMPHASIZE = 'C801'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
ENDFORM.
* Build Layout for ALV Grid Report
FORM BLD_LAYOUT.
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
GD_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
*GD_LAYOUT-TOTALS_TEXT = 'GRAND TOTAL'.
ENDFORM.
* Display report using ALV grid
FORM DISPLAY_ALV_REPORT.
DATA T_EVENT TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = T_EVENT.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = GD_REPID
   IS_LAYOUT                         = GD_LAYOUT
   I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
   I_GRID_TITLE                      = 'SALES DOCUMENT HEADER'
   IT_FIELDCAT                       = FLDCAT[]
   I_SAVE                            = 'X'
TABLES
    T_OUTTAB                          = IT_VBAK
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* Retrieve data from VBAK table and populate itab IT_VBAK
FORM DATA_RETRIEVAL.
<b>DATA LD_COLOR(1) TYPE C.</b>
SELECT VBELN ERDAT ERNAM AUDAT VBTYP NETWR VKORG
UP TO 20 ROWS
FROM VBAK
INTO TABLE IT_VBAK.
<b>LOOP AT IT_VBAK INTO WA_VBAK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBAK-LINE_COLOR.
MODIFY IT_VBAK FROM WA_VBAK.
ENDLOOP.</b>
ENDFORM.
FORM TOP_OF_PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
      W_HEADER TYPE SLIS_LISTHEADER.
W_HEADER-TYP = 'H'.
W_HEADER-INFO = 'WELCOME HEADER LIST'.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'REPORT:'.
W_HEADER-INFO = SY-REPID.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'DATE:'.
CONCATENATE SY-DATUM+6(2) ' / ' SY-DATUM+4(2) ' / ' SY-DATUM(4) INTO W_HEADER-INFO.
APPEND W_HEADER TO T_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    IT_LIST_COMMENTARY       = T_HEADER.
ENDFORM.
reward points,if it is useful

Display report using star office

Hi...Need some light on this,,,How to display abap report using Star offce instead of MS excel???? Thanks

If Star Office (??) is OLE compliant, you will need to issue a CREATE OBJECT 'WHATEVER.THE.REGISTRY.ENTRY.NAME.IS.HERE'.
Then once it is activated on the client system, you will need to issue OLE automation commands from ABAP to the Star Office client.
You will probably need an Object Browser to help you with the Star Office commands to pass the ABAP info down to the client.

Need to display report using SSRS

I have a query that display above format from different tables.
But since in row 2 and 3 date, time,day values are same, I don't want it do display it again in row 3.Below is the required format.
How to do this. I need to display this report using SSRS
Need Help..Thanks
Abhinav

This is basically a presentation issue.
You should be dealing this in your front end tool like say reporting services. The property is called Hide Duplicates in SSRS and is available from textbox properties. You dont need to do anything at sqlserver query end for this.
If you really have no other way then you can use a logic as below
select
case when t1.[Date] IS NULL then '' else cast(t.[Date] as varchar(20)) end AS [Date],
case when t1.[Date] IS NULL then '' else cast(t.[Day] as varchar(10)) end AS [Day],
case when t1.[Date] IS NULL then '' else cast(t.[Time]
as varchar(10)) end AS [Time],
t.company
from table t
left join (select [Date],[Day],[Time],MIN(Company) AS MinComp
FROM Table
GROUP BY [Date],[Day],[Time]
)t1
ON t1.[Date] = t.[Date]
AND t1.[Day] = t.[Day]
AND t1.[Time] = t.[Time]
AND t1.MinComp = t.Company
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Images are not loaded while displaying report using Report Viewer with JRC!

Hi Everybody,
I created a Report designed using CR XI.
I am viewing that report from my application using JRC and crystal Report Viewer and PDF viewer.
In PDF viewer everything is fine including images display, saving etc.
But in Crystal report Viewer, I am not getting the images of the buttons such as export, next page, previous page etc. But all the funtionalities are working.
From where i can load the pictuers and how?
Can anybody help on this?
Thanks in advance,
Saravanakumar.
Edited by: Saravana kumar on Nov 17, 2008 1:23 PM

Hi Saravana
The issue you have posted here in the Crystal Reports Design Forum is a Developer issue. Please post this query to the BusinessObjects SDK Application Development - > Java Development Crystal Reports forum.
Regards
Girish Bhosale

Steps for Creating Report using LDB

hellow sirs
can u please tell Step by Step method for creating Reports using LDB method...
if possible with screen Shots..
thanking You
Rahul

Hi,
Please refer the code below:
Use the PNP LDB for this program,
*: Report: ZP_POSTCODE                                                :
*: Date : 2004                                                       :
*: Description: Displays report of employees by postcode area,         :
*:              includes current travelling allowances (i.e. parking   :
*:              permit or transport card etc..)                        :
*: Use:         Help encourage the use of car sharing and public       :
*:              transport where appropriate.                           :
REPORT zp_postcode.
type-pools: slis.                                      "ALV Declarations
NODES: pernr.
INFOTYPES: 0000, 0001, 0002, 0006, 0008, 0014, 0105, 0121.
SELECTION-SCREEN BEGIN OF BLOCK pcode WITH FRAME TITLE text-s01.
SELECT-OPTIONS: so_pcode FOR p0006-pstlz.
SELECTION-SCREEN END OF BLOCK pcode.
TYPES: BEGIN OF t_output,
pernr       TYPE p0001-pernr,   "personnel name
anredtxt    TYPE t522t-atext,   "title (based on p0002-anred)
fname       TYPE p0002-vorna,   "first name
lname       TYPE p0002-nachn,   "last name
orgtx       TYPE t527x-orgtx,   "dept
fte         TYPE p0008-bsgrd,   "fte
parking(20) TYPE c,
payslip     TYPE t526-sachn,        "payslip address
telno       TYPE p0105-usrid_long, "tel number(p0105-usrty = 0020)
email       TYPE p0105-usrid_long, "email (p0105-usrty = MAIL)
postcode    type p0006-pstlz,
END OF t_output.
DATA: it_output TYPE STANDARD TABLE OF t_output INITIAL SIZE 0,
      wa_output TYPE t_output.
*ALV data declarations
data: fieldcatalog   type slis_t_fieldcat_alv with header line,
      gd_tab_group   type slis_t_sp_group_alv,
      gd_layout      type slis_layout_alv,
      gd_repid       like sy-repid,
      gt_events      type slis_t_event,
      gd_prntparams type slis_print_alv,
      gd_count(6)    type n,
      gd_outtext(70) type c,
      gd_lines       type i.
*START-OF-SELECTION.
START-OF-SELECTION.
clear: gd_count.
GET pernr.
* Infotype 0121 is used to store multiple contracts for personnel.
* Field p0121-hpern contains the personnel number for the main contract.
PROVIDE * from p0121 between pn-begda and pn-endda.
*   Check if main contract
    if p0121-pernr ne p0121-hpern.
      reject.
    endif.
ENDPROVIDE.
add 1 to gd_count.
concatenate 'Processing personnel data'(m10) gd_count into gd_outtext
            separated by ' '.
* Display indicator for employee count
perform progress_indicator using gd_outtext.
* Retrieve datd from infotypes
rp_provide_from_last p0000 space pn-begda pn-endda.
rp_provide_from_last p0001 space pn-begda pn-endda.
rp_provide_from_last p0002 space pn-begda pn-endda.
rp_provide_from_last p0006 space pn-begda pn-endda.
rp_provide_from_last p0008 space pn-begda pn-endda.
rp_provide_from_last p0014 space pn-begda pn-endda.
* Check post code
CHECK p0006-pstlz IN so_pcode. "cp
* Post code
wa_output-postcode = p0006-pstlz.
* Personnel number
wa_output-pernr = pernr-pernr.
* Personnel title
SELECT SINGLE atext
    FROM t522t
    INTO wa_output-anredtxt
   WHERE sprsl EQ sy-langu AND
         anred EQ p0002-anred.
* First name
wa_output-fname = p0002-vorna.
* Last name
wa_output-lname = p0002-nachn.
* Organizational Unit text (dept)
SELECT SINGLE orgtx
    FROM t527x
    INTO wa_output-orgtx
   WHERE sprsl EQ sy-langu AND
         orgeh EQ p0001-orgeh AND
         endda GE sy-datum.
* FTE
wa_output-fte = p0008-bsgrd.
* Parking / travel deducted?
CASE p0014-lgart.
    WHEN '7180' OR '7181' OR '7182'.
      wa_output-parking = text-002.
    WHEN '7183'.
      wa_output-parking = text-001.
    WHEN '7171' OR '7172' or '7173' or '7174' or
         '7175' or '7176' or '7177' or '7178'.
      wa_output-parking = text-003.
ENDCASE.
* Payslip Address
SELECT SINGLE sachn
    FROM t526
    INTO wa_output-payslip
   WHERE werks EQ p0001-werks AND
         sachx EQ p0001-sacha.
PROVIDE * from p0105 between pn-begda and pn-endda.
*   Telephone numbers
    if p0105-usrty = '0020'.
       wa_output-telno = p0105-usrid_long.
    endif.
*   Email address
    if p0105-usrty = 'MAIL'.
       wa_output-email = p0105-usrid_long.
    endif.
ENDPROVIDE.
append wa_output to it_output.
clear: wa_output.
*END-OF-SELECTION.
END-OF-SELECTION.
describe table it_output lines gd_lines.
if gd_lines gt 0.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
else.
message i003(zp) with 'No records found'.
endif.
*&      Form PROGRESS_INDICATOR
*       Displays progress indicator on SAP screen
form progress_indicator using p_text.
call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
*         PERCENTAGE = 0
           text       = p_text.
endform.                    " PROGRESS_INDICATOR
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'PERNR'.
fieldcatalog-seltext_m   = 'Personnel No.'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
* fieldcatalog-emphasize   = 'X'.
* fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'ANREDTXT'.
fieldcatalog-seltext_m   = 'Title'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FNAME'.
fieldcatalog-seltext_m   = 'First Name'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'LNAME'.
fieldcatalog-seltext_m   = 'Last Name'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'ORGTX'.
fieldcatalog-seltext_m   = 'Department'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FTE'.
fieldcatalog-seltext_m   = 'FTE'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PARKING'.
fieldcatalog-seltext_m   = 'Parking/Metrocard'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PAYSLIP'.
fieldcatalog-seltext_m   = 'Payslip Add.'.
fieldcatalog-col_pos     = 7.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'TELNO'.
fieldcatalog-seltext_m   = 'Telephone'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EMAIL'.
fieldcatalog-seltext_m   = 'E-mail'.
fieldcatalog-col_pos     = 9.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'POSTCODE'.
fieldcatalog-seltext_m   = 'Post code'.
fieldcatalog-col_pos     = 10.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-zebra             = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_output
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT

ALV report using the field catalog

which is the quickest way to generate an ALV report using the field catalog merge. without needing to build the field catalog manually .
is it easier to create a structure and passe it in the field catalog merge . if yes can i have an example plzzzz

hI
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o Performance is affected since the code of the table definition must
always be read and interpreted at runtime.
o Dictionary references are only considered if the keywords LIKE or
INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
                         Data declaration
                         Data retrieval
                         Build fieldcatalog
                         Build layout setup
*& Report ZDEMO_ALVGRID                                               *
*& Example of a simple ALV Grid Report                                 *
*& The basic requirement for this demo is to display a number of       *
*& fields from the EKKO table.                                         *
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
*            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL

Can we display custom error message in user decision step screen.

Hi,
My requirement is to display error message when approver selects reject button in user decision step.
based on some condition i need to display error message in user decision screen when approver tries to
reject .
Please help
Thanks,
Phani

Hi ibrahim,
Thanks for your Replay.
steps
1. cretae global class with interface IF_SWF_IFS_WORKITEM_EXIT.
2. cretae Event with importing parameter.
where i need to call EVENT_RAISED method ,do inned to call that method in
IF_SWF_IFS_WORKITEM_EXIT ?
how SWRCO_EVENT_AFTER_EXECUTION value is passed to method EVENT_RAISED ?
Thanks,
phani

Display reports from BW using WAD on blackberry

Hi All,
I have to display reports from BW using WAD on blackberry
can any one please guide me how to do it?
awaiting Reply
Thanks & Regards
Prasad

you have to integrate SAP Mobile infrastrcture with BW system to achive this.

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Urgent: Issue while displaying the PDF Reports Using XDO Common region

Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep

Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep

First group heading below displays below column headings using Template 23 Classic Report using Repeat Headings on Break

Hello,
I am migrating an application from APEX 3 to APEX 4.2 on one thing I notice with the classic reports when I bring them into Template 23 is that the first break section has the break row display below the column headers for that section while the remaining rows correctly have it display above the headers on subsequent group sections.
When I look a the code in firebug I can seen that the all tables but the first, the break row is being included as the last row of the previous table so I can see how this would not work for the break since.
I have tow questions.
1. Is this really intentional because it doesn't seem terribly elegant and my users zeroed in on it right away as a perceived bug.
2. Is there a reasonable work around that still uses Repeat Headings on Break? I have multiple reports on the same page in places so changing over to interactive reports is not a silver bullet for me in this case.
Example of issue can be seen at apex.oracle.com at Home
Thanks,
Brad

Roadling wrote:
Hello,
I am migrating an application from APEX 3 to APEX 4.2 on one thing I notice with the classic reports when I bring them into Template 23 is that the first break section has the break row display below the column headers for that section while the remaining rows correctly have it display above the headers on subsequent group sections.
1. Is this really intentional because it doesn't seem terribly elegant and my users zeroed in on it right away as a perceived bug.
The Standard report template definition in theme 23 contains thead and tbody elements:
Before Column Heading
<thead>
Column Heading Template
<th #ALIGNMENT# id="#COLUMN_HEADER_NAME#">#COLUMN_HEADER#</th>
After Column Heading
</thead>
<tbody>
After Rows
</tbody>
</table>
</td>
</tr>
</tbody>
<tbody class="uReportPagination">
#PAGINATION#
</tbody>
</table>
<div class="uReportDownloadLinks">#EXTERNAL_LINK##CSV_LINK#</div>
This is intentional, following best practice for marking up HTML tables. What is not intended is the problem that arises when this template is used with the Repeat Headings on Break break formatting option. The repeated headings result in the table consisting of tag soup containing multiple incorrectly constructed tbody and thead elements, which is invalid.
2. Is there a reasonable work around that still uses Repeat Headings on Break? I have multiple reports on the same page in places so changing over to interactive reports is not a silver bullet for me in this case.
Create a copy of the Standard report template as Standard (break formatting) for use with break reports, remove the thead and tbody tags from the template definitions, and change the break reports to use the new template. (Or, if you primarily have break reports using the Standard template, keep the tags in the copy and remove them from the original to minimize the number of reports you have to edit.)
Personally I'd create a custom row report template for complex break reports in order to be able to have complete control over the structure and presentation.

Image not displaying in pdf report using XSL-FO and using Oracle 11g databa

Good Afternoon,
I have created over 15 reports using XSL-fo, with the following syntax to display an image on the pdf:
fo:block margin-left="0.24cm" margin-right="0.27cm" margin-top="0.0cm" ><fo:external-graphic content-width="scale-to-fit" content-height="scale-to-fit" width="1.73cm" height="1.57cm" >
<xsl:attribute name="src">'url("http://readiness:7780/i/marforcom_symbol_rpts.gif")'</xsl:attribute></fo:external-graphic>
</fo:block>
This syntax works fine when using Oracle 10g, now my database has been upgraded to 11g and my image no longer displays in the reports. I have already upload the image into the database as a workspace image.
I have tried to point the image @ the image by using url(#WORKSPACE_IMAGE#marforcom_symbol_rpts.gif)
or <img src ="#IMAGE_PREFIX#marforcom_symbol_rpts.gif")
and it still doesn't work.
I have searched this forum trying to come up with a solution that will fix my problem and am unable to.
Current config: Oracle 11g, using pl/sql gateway.
I need to know how to point the xsl-fo file to the database, where the image now resides.
Thanks,
Mary
Edited by: MaryM on Jul 25, 2012 3:15 PM
Edited by: MaryM on Jul 25, 2012 3:51 PM

Hi,
I think you need load images to database XDB virtual directory /i/ and then use #IMAGE_PREFIX# substitution.
This might help to access /i/
http://www.apex-blog.com/oracle-apex/accessing-i-using-ftp-170.html
Or use this to load images
http://oracleinsights.blogspot.fi/2012/05/loading-images-into-oracle-xdb.html
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

How to display 3 level hierarchy alv report using SALV

Hi ,
      I need to display a Hierarchy ALV report with 3 level.I thought of trying CL_SALV_HIERSEQ_TABLE but i am able to display only two level report.
      How can i display the 3 - level heirarchy report using SALV. I don't want to use SALV_TREE.
      Regards,
      Aditya Tanguturi.

Hi Aditya,
Please check this thread
Is it possible to display more than 2 levels us... | SCN
Thanks !
Amit

Display descirption in BO link in Decision step instead of keyfields

Hi All,
I have created a workflow in Records management which is integrated with SRM for the approval of documents. I have a user decision step in my workflow which has many documents displayed as links during approval. For this i copied the std decision task and created my own task and added the business object 'DOCUMENT' ( multi line element). Now it is displaying the documents correctly. but it shows the link as 'BO: key fields' . In this case the key fields are combination of document class and document guid.
Now the requirement is to display the description of the document instead of keyfields. The description will be available as one of the attribute for the document BO.
Can anyone help on this requirement?
Thanks,
Sivagami R

Hi,
Assign "Description as your default attribute in your BO basic data...
this will work...
Regards
Gautam

Displaying report using decision step

Similar Messages

Maybe you are looking for