Displaying selection screen details in Alv Report output display as Header
Hi all,
May be somebody knows how I can show selected values with select-options in top_of_page using REUSE_ALV_GRID_DISPLAY.
This shoud work for all the reports and diff selection screens .
I need one dynamic process which will for display any report selection screen selected details.(Basically varient information of report).
Small example if possible, please.
Thanks in advance,
Rimas
Hi Thiru,
Thanks for the input.
This is my exact requirement.
Hi Experts,
I would like to Display / Print Select-options selected details in ALV Header.
Ex: Say suppose here i enter kunnr as 1000
lifnr as 2000 to 4000
p_langu as 'EN'.
p_dir as 'C:\TEMP,
p_upda as 'X'
for selection screen below.
SELECTION-SCREEN :BEGIN OF BLOCK blk1 WITH FRAME TITLE text-000.
SELECT-OPTIONS : s_kunnr FOR kna1-kunnr.
SELECT-OPTIONS : s_lifnr FOR lfa1-lifnr.
PARAMETER : p_lanuge LIKE t002-spras DEFAULT sy-langu.
PARAMETER: p_dir LIKE rlgrap-filename
DEFAULT text-003 LOWER CASE.
PARAMETERS: p_upd AS CHECKBOX DEFAULT 'X'.
I dont want to Hard code selection screen values like
DATA: header TYPE slis_t_listheader,
wa TYPE slis_listheader,
wa-typ = 'S'(093).
wa-key = s_lifnr .
wa-info = 'Vendor no".
APPEND wa TO header.
I want dynamic process for all of my selection screen values selected
hard code may be it will be fine small selection screen it will work.
Fur that i got one process to get dynamically through fm
Ex: DATA: irsparams TYPE rsparams OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = program
TABLES
selection_table = irsparams
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
loop at irsparams.
write : / irsparams-SELNAME.
write : / irsparams-SIGN.
write : / irsparams-OPTION.
write : / irsparams-LOW.
write : / irsparams-HIGH.
endloop.
I have done my requirement partially but i am failed to achive my full requirement.
Because
rsparams strcture is diff from slis_t_listheader.
Can any one help me for further assistence to display irsparams strcture data in alv header.
Thanks
Nag
Similar Messages
-
Printing Selection-Screen while printing ALV Grid output display
Hi,
I have a requirement wherein I want to print the Selection Screen also while printing the output in simple ALV grid Display.
Currently when I print the ALV output report, only the header and the Body of the ALV is getting printed. But the requirement is that I also want to print Selection screen along with this.
If anyone has faced a similar situation, plz let me know what needs to be done in order to print the selection screen also while printing the ALV report output.
Rgds,
NitinHi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = p_repid
TABLES
selection_table = it_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc EQ 0.
WRITE:1 'Selection Criteria'(i19),
/1 sy-uline(18),
/1 'Variant Name'(i21),
23 sy-slset.
*-- This function module lists the Selection Screen contents
CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
EXPORTING
report = p_repid
seltext = 'X'
newpage = space
TABLES
sel_tab = it_int_tab
EXCEPTIONS
sel_tab_empty = 1
OTHERS = 2.
Mark all helpful answers -
How to Print Selection-Screen along with ALV Report output
Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
NitinHi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin -
Print Selection Screen Parameters in ALV report only once
Does anyone know how to print the selection screen within a ALV report.
I've tried everything. I have the code to capture the selection parameters into a internal table. I can use top_of_page but I only want it printed once.Hi,
If you have captured the selection screen entries in an internal table, then you could display it once by using the BLOCK LIST ALV.
Check the function module.
REUSE_ALV_BLOCK_LIST_DISPLAY
Using this function module more than 1 alv could be display in the report.
In our case ..there will be two alvs ...one for the selection screen n other for the main report output.
Check the following example on the block List ALV....
<b>BALVBT01</b>.
Regards,
Vara -
Select mutiple rows in ALV report output
Hi All,
I want to select the Multiple records i in ALV report output with out holding the CNTL(Control Key).
Is there any options in Layout?
Please let me know
regards,
Ajay
Edited by: Ajay reddy on May 30, 2010 3:27 PMHi Ajay,
To select several rows without Control button, if the rows are adjacent:
- select the first and the last of the desired rows with Shift button pressed
or
- select a row, keep the mouse button pressed, and pass over the desired rows
I don't know an option without Control if the rows are not adjacent.
http://help.sap.com/saphelp_bw/helpdata/en/d1/7d9d37664e4d45e10000009b38f8cf/content.htm
Regards,
Paulo Carvalho -
Display selection screen details in the header of ALV
hi..
can someone please help me on how to display the data in the selection screen in the header in ALV?
i hope someone can help me..thanks very much..Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100 -
How to display selected table fields in ALV report.
Hi,
I am displaying data from table EKPO using ALV through this query.
select * from ekpo into table itab_ekpo up to 25 rows.
bt if i need to display selected fields like
select ebeln matnr netpr from ekpo into table itab_ekpo up to 25 rows.
IT gives error GETWA_NOT_ASSIGNED.
FIELD SYMBOL HAS NOT YET BEEN ASSIGNED
CAN ANYONE PLZ HELP ME.Hi ,
I am pasting the code in which i am getting the error.Plz help.
REPORT ZHALV.
tables:ekpo.
data itab_ekpo type ekpo occurs 100 with header line.
types: begin of itab_new,
f_ebeln type ekpo-ebeln,
f_matnr type ekpo-matnr,
f_netpr type ekpo-netpr,
end of itab_new.
data itab1 TYPE STANDARD TABLE OF itab_new initial size 0.
type-pools: slis.
DATA: lt_fieldcat TYPE slis_t_fieldcat_alv,
lf_fieldcat TYPE slis_fieldcat_alv.
DATA: ws_repid TYPE sy-repid VALUE 'ZHALV'.
DATA: l_layout TYPE slis_layout_alv.
selection-screen Begin of block block1 with frame title text-111.
select-options : S_EBELN for EKPO-EBELN.
selection-screen end of block block1.
INITIALIZATION.
start-of-selection.
select ebeln matnr netpr from ekpo into table itab1 up to 10 rows WHERE EBELN IN S_EBELN.
*select * from ekpo into table itab_ekpo up to 25 rows.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM GET_DETAILS.
end-of-selection.
*& Form build_fieldcatalog
text
FORM build_fieldcatalog .
PURCHASING DOCUMENT NUMBER
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'EBELN'.
lf_fieldcat-ref_tabname = 'EKKO'.
lf_fieldcat-ref_fieldname = 'EBELN'.
MATERIAL NUMBER
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'MATNR'.
lf_fieldcat-ref_tabname = 'EKPO'.
lf_fieldcat-ref_fieldname = 'MATNR'.
APPEND lf_fieldcat TO lt_fieldcat.
NET PRICE IN PURCHASING DOCUMENT
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'NETPR'.
lf_fieldcat-ref_tabname = 'EKPO'.
lf_fieldcat-ref_fieldname = 'NETPR'.
lf_fieldcat-cfieldname = 'WAERS'.
lf_fieldcat-do_sum = 'X'.
APPEND lf_fieldcat TO lt_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form GET_DETAILS
text
FORM GET_DETAILS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ws_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = 'EKPO'
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = lt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = itab1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*append itab_ekpo to i_tab.
ENDFORM. "GET_DETAILS -
Display seletion screen values in alv grid output
Hi,
I am changing from alv list to alv grid. In ALV list after displaying output, in application tool bar one button is there that is "Display selections", when i click it, is giving all selection screen values in a popup. i want same funtionality in ALV grid.
By
jaganHi,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_top_of_page = 'TOP_OF_PAGE'
FORM top_of_page .
PERFORM populate_top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = ig_header.
ENDFORM. " top_of_page
*& Form populate_top_of_page
FORM populate_top_of_page .
REFRESH ig_header.
CLEAR wg_header .
wg_header-typ = c_h.
wg_header-info = 'Selection Criteria:'(004).
APPEND wg_header TO ig_header.
CLEAR: wg_header.
IF NOT s_lgort IS INITIAL.
CONCATENATE s_lgort-low '-'(111) s_lgort-high
INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Storage Location :'(005).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
IF NOT s_ekgrp IS INITIAL.
CONCATENATE s_ekgrp-low '-'(111) s_ekgrp-high
INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Purchasing Group :'(006).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
IF NOT s_werks IS INITIAL.
CONCATENATE s_werks-low '-'(111) s_werks-high
INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Plant :'(007).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
ENDFORM. " populate_top_of_page
Hope this is helpful...
Regards
Milan -
Displaying selection screen data on alv header in multiple rows and columns
Hi
Presently in my requirement , whatever the data entered in selection screen should display on alv header and item details on alv grid display.
for eg...
on alv header
customer no : 1000 to 2000 sales order no: 111
name : gff to ff sales org:
city: country:
item details below this
plz guide me how to solve this issue.
Thanks & Regards,
PradeepHi,
Check this code this may help you.
<code>
TYPE-POOLS : SLIS.
TABLES VBRK.
TYPES : BEGIN OF TY_VBRK,
VBELN TYPE VBRK-VBELN,
VKORG TYPE VBRK-VKORG,
VTWEG TYPE VBRK-VTWEG,
SPART TYPE VBRK-SPART,
FKDAT TYPE VBRK-FKDAT,
END OF TY_VBRK,
BEGIN OF TY_VBRP,
VBELN TYPE VBRP-VBELN,
POSNR TYPE VBRP-POSNR,
MATNR TYPE VBRP-MATNR,
ARKTX TYPE VBRP-ARKTX,
FKIMG TYPE VBRP-FKIMG,
NETWR TYPE VBRP-NETWR,
END OF TY_VBRP,
BEGIN OF TY_TARGET,
VBELN TYPE VBRK-VBELN,
VKORG TYPE VBRK-VKORG,
VTWEG TYPE VBRK-VTWEG,
SPART TYPE VBRK-SPART,
FKDAT TYPE VBRK-FKDAT,
POSNR TYPE VBRP-POSNR,
MATNR TYPE VBRP-MATNR,
ARKTX TYPE VBRP-ARKTX,
FKIMG TYPE VBRP-FKIMG,
NETWR TYPE VBRP-NETWR,
END OF TY_TARGET.
DATA : T_VBRK TYPE TABLE OF TY_VBRK,
W_VBRK TYPE TY_VBRK,
T_VBRP TYPE TABLE OF TY_VBRP,
W_VBRP TYPE TY_VBRP,
T_TARGET TYPE TABLE OF TY_TARGET,
W_TARGET TYPE TY_TARGET,
FIELD CATALOG ******************
T_FCAT TYPE SLIS_T_FIELDCAT_ALV,
W_FCAT TYPE SLIS_FIELDCAT_ALV,
*************************************SUB TOTALS AND SORTING***********
T_SORT TYPE SLIS_T_SORTINFO_ALV,
W_SORT TYPE SLIS_SORTINFO_ALV,
*************************************FOR LIST HEADER******************
T_LIST_HEAD TYPE SLIS_T_LISTHEADER,
W_LIST_HEAD TYPE SLIS_LISTHEADER,
T_LIST_HEAD1 TYPE SLIS_T_LISTHEADER,
W_LIST_HEAD1 TYPE SLIS_LISTHEADER,
*************************************FOR LIST HEADER******************
W_LAYOUT TYPE SLIS_LAYOUT_ALV,
************************************FOR EVENTS************************
T_EVENT TYPE SLIS_T_EVENT,
W_EVENT TYPE SLIS_ALV_EVENT.
*********************************SELECT OPTIONS***********************
SELECT-OPTIONS : S_VBELN FOR VBRK-VBELN DEFAULT 90005316 TO 90005330.
**RETRIVING DATA************************
PERFORM DATA_RETRIVE.
**BUILDING THE FIELD CATALOG************
PERFORM BUILD_FCAT.
**BUILDING THE TABLE FOR LIST HEADER****
PERFORM BUILD_LIST_HEAD.
*******************************CALLING THE FUNCTION MODULE************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'LIST_TOP_OF_PAGE'
IT_FIELDCAT = T_FCAT
IT_SORT = T_SORT
TABLES
T_OUTTAB = T_TARGET.
*& Form DATA_RETRIVE
FORM DATA_RETRIVE .
SELECT VBELN VKORG VTWEG SPART FKDAT FROM VBRK INTO CORRESPONDING FIELDS
OF TABLE T_VBRK WHERE VBELN IN S_VBELN.
IF SY-SUBRC EQ 0.
SORT T_VBRK BY VBELN.
SELECT VBELN POSNR MATNR ARKTX FKIMG NETWR FROM VBRP INTO TABLE
T_VBRP FOR ALL ENTRIES IN T_VBRK WHERE VBELN = T_VBRK-VBELN.
ENDIF.
LOOP AT T_VBRP INTO W_VBRP.
LOOP AT T_VBRK INTO W_VBRK WHERE VBELN = W_VBRP-VBELN.
W_TARGET-VBELN = W_VBRK-VBELN.
W_TARGET-VKORG = W_VBRK-VKORG.
W_TARGET-VTWEG = W_VBRK-VTWEG.
W_TARGET-SPART = W_VBRK-SPART.
W_TARGET-FKDAT = W_VBRK-FKDAT.
W_TARGET-POSNR = W_VBRP-POSNR.
W_TARGET-MATNR = W_VBRP-MATNR.
W_TARGET-ARKTX = W_VBRP-ARKTX.
W_TARGET-FKIMG = W_VBRP-FKIMG.
W_TARGET-NETWR = W_VBRP-NETWR.
APPEND W_TARGET TO T_TARGET.
ENDLOOP.
ENDLOOP.
SORT T_TARGET BY VBELN.
ENDFORM. " DATA_RETRIVE
*& Form BUILD_FCAT
FORM BUILD_FCAT .
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'VBELN'.
W_FCAT-SELTEXT_M = 'BILLING NO'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'VKORG'.
W_FCAT-SELTEXT_M = 'SALES ORGANIZATION'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'VTWEG'.
W_FCAT-SELTEXT_M = 'DISTRIBUTION CHANNEL'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 4.
W_FCAT-FIELDNAME = 'SPART'.
W_FCAT-SELTEXT_M = 'DIVISION'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 5.
W_FCAT-FIELDNAME = 'FKDAT'.
W_FCAT-SELTEXT_M = 'CREATION DATE'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 6.
W_FCAT-FIELDNAME = 'POSNR'.
W_FCAT-SELTEXT_M = 'BILLING ITEM'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 7.
W_FCAT-FIELDNAME = 'MATNR'.
W_FCAT-SELTEXT_M = 'MATERIAL NUM'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 8.
W_FCAT-FIELDNAME = 'ARKTX'.
W_FCAT-SELTEXT_M = 'DESCRIPTION'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 9.
W_FCAT-FIELDNAME = 'FKIMG'.
W_FCAT-SELTEXT_M = 'QUANTITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 10.
W_FCAT-FIELDNAME = 'NETWR'.
W_FCAT-SELTEXT_M = 'NET VALUE'.
W_FCAT-DO_SUM = 'X'.
APPEND W_FCAT TO T_FCAT.
ENDFORM. " BUILD_FCAT
*& Form BUILD_LIST_HEAD
FORM BUILD_LIST_HEAD .
DATA : L_DATE(10),
L_TIME(8).
W_LIST_HEAD-TYP = 'S'.
W_LIST_HEAD-KEY = 'Sales org :'.
W_LIST_HEAD-INFO = S_VBELN-LOW .
APPEND W_LIST_HEAD TO T_LIST_HEAD.
CLEAR W_LIST_HEAD.
W_LIST_HEAD-TYP = 'S'.
W_LIST_HEAD-KEY = 'TO '.
W_LIST_HEAD-INFO = S_VBELN-HIGH.
APPEND W_LIST_HEAD TO T_LIST_HEAD.
CLEAR W_LIST_HEAD.
ENDFORM. " BUILD_LIST_HEAD
*& Form LIST_TOP_OF_PAGE
FORM LIST_TOP_OF_PAGE .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = T_LIST_HEAD.
ENDFORM. " LIST_TOP_OF_PAGE
<code>
Regards -
How to get selection screen details of any report dynamically
Hi
We have a requirement where we need to submit different reports based upon certain conditions. I need to know FM or other way around to fetch the details of selection screen (name of selection screen parameters or select option and whether its a parameter or select option) any report. Please guide me in this regard.
Regards
SwetabhDATA : SEL_TAB TYPE RSPARAMS OCCURS 0.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = 'ZRP_PACKING_INVOICE_MAIN'
TABLES
SELECTION_TABLE = SEL_TAB.
SUBMIT ZSH_SD_INVOICE_NEW WITH
SELECTION-TABLE SEL_TAB AND RETURN.
above f.m will get the all details of selection screen and give u in internal table and that can be passed to submit statement... -
ALV Report output as per selection screen
Hi,
I got a requirement. In selection screen there is field where i can entered 1 to 12 numbers. When i entered a number, so that in output of an alv report should display that many fields
for eg.
if i entered 5 in selection screen
in out put 5 fields of alv report should display.
Thanks....
Moderator message : Spec dumping / Outsourcing is not allowed. Thread locked.
Edited by: Vinod Kumar on Jul 15, 2011 11:34 AMhi,
u sort the internal table by the materials in our variant.
like sort itab by jtab
itab consists of all materials
jtab cosists of materials in variant.
hope it may helpful,
regards,
chandu -
FM to display Selection screen on report output??
Hi Experts,
Is there an FM to display Selection screen on report output.
Thanks In Advance.Hi Ashwin,
Refer to below link
http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
or
The easiest way is to define your selection screen in the TOP include of your module pool.
Then call the selection screen.
Selection Screen
selection-screen begin of screen 1010 as window title text-001.
selection-screen begin of block b1 with frame title text-002.
parameters: p_vornr type resb-vornr,
p_refno(20) type c,
p_plnid type zplcfg-plnid as listbox visible length 20,
p_sorts type c as listbox visible length 20.
selection-screen begin of line.
selection-screen comment (20) text-004.
selection-screen position 33.
parameters: p_order as checkbox default 'X'.
selection-screen end of line.
selection-screen end of block b1.
selection-screen end of screen 1010.
Now call the selection screen.
call selection-screen 1010.
if sy-subrc = 0.
perform get_production_orders.
perform process_orders.
endif.
Thanks!! -
Double Click on ALV Report Output, Bringing to selections creen
Hello Gurus,
Please help me When i do double click on ALV Report output , it is going back to Selection screen, actually its working as Back button. Now how to stop it.. I did debugging but i cannot trace it.PERFORM SUB_CREATE_FCAT.
DATA W_REPID LIKE SY-REPID.
W_REPID = SY-REPID.
ls_layout-colwidth_optimize = 'X'.
ls_layout-zebra = 'X'.
PERFORM SUB_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-CPROG
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'C_USERCOMMAND '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
IS_LAYOUT = ls_layout
IT_FIELDCAT = IT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
I_SAVE = 'U'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = T_FINAL
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF. -
Issue in displaying header details in ALV report
Hi,
I have used slis_t_listheader and REUSE_ALV_COMMENTARY_WRITE to display the header details in ALV report.I want the details to be displayed as below.
Requester : ---------------------- Page: 1
Program: ----------------------- Date:---------
Title of Report
But when I use the structure slis_t_listheader to display the header details,all the fields are coming one below the other.
How can I get the fields as shown in the above format
Edited by: Abaper12345 on Jun 25, 2009 7:54 AMHi,
Go through following code... its showing the data exactly the way you want....
REPORT TEST3.
TYPE-POOLS:slis.
TABLES:MARA.
*Type Declaration
TYPES:BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
END OF t_mara.
*Internal Table
data:it_mara type standard table of t_mara.
*Work Area
data:wa_mara type t_mara.
DATA:i_repid TYPE sy-repid .
i_repid = sy-repid.
*Declaration for field catalog
DATA : fcat TYPE slis_t_fieldcat_alv,
wa_fcat TYPE slis_fieldcat_alv.
*Declaration for Layout
data : WA_LAYOUT type SLIS_LAYOUT_ALV.
*Initializing ColumnWidth_Optimize For Layout
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
START-OF-SELECTION
START-OF-SELECTION.
*Fetching data into internal tables
PERFORM get_data.
*Buil Fieldcatalog
PERFORM build_fcat.
*Display ALV Report
PERFORM alv_display.
*Build Fieldcat
FORM build_fcat .
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Material Number'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERSDA'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Date'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERNAM'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'User'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
endform.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
select matnr ersda ernam from mara into table it_mara.
endform. " GET_DATA
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
form ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = i_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = fcat
TABLES
t_outtab = it_mara
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " ALV_DISPLAY
*& Form html_top_of_page " I_CALLBACK_HTML_TOP_OF_PAGE "
FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
CALL METHOD document->add_text
EXPORTING
text = 'Program'
sap_color = document->list_group
sap_fontstyle = document->standard
sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
repeat = 1
CALL METHOD document->add_text
EXPORTING
text = 'Requester'
sap_color = document->list_group
sap_fontstyle = document->standard
sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
repeat = 1
CALL METHOD document->add_gap
EXPORTING
width = 125
CALL METHOD document->add_text
EXPORTING
text = 'This Is Test Data'
sap_color = document->list_group
sap_fontsize = document->LARGE
sap_fontstyle = document->standard
sap_emphasis = document->strong.
ENDFORM. "HTML_TOP_OF_PAGE
Thanks & Regards
Ashu SIngh -
ALV report which displays Delivery and Invoice details..by linking vbfa.
Hi...
I wants to develop an ALV Report, which displays Delivery details as well as Invoice details for a range of given sale orders.
For this report I am using Tables : VBAK,VBAP,LIKP,LIPS,VBFA tables .
Here VBFA is a table for Document flow how to link this with report ??
Please reply.
Regards ,
ASHOK
Moderator message : Not enough re-search before posting, spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 9:58 AMVBFA has VBELV and POSNV can be used to map VBAP (sales order item) i.e.
VBFA-VBELV = VBAP-VBELN AND
VBFA-POSNV = VBAP-POSNV
with VBTYP_N = J Values available in VBFA-VBELN and VBFA-POSNN will be LIPS -VBELN and LIPS-POSNR
VBTYP_N/ VBTYP_V = J stands for delivery and C stands for order
Nitesh
Maybe you are looking for
-
How do I share apps between 2 users on same computer?
My wife and I have recently each gotten iPhones. We both use the same mac with our own login but same using the same apple id. How do we share our apps from our own itunes login?
-
I need ready code for a simple paint program today
hi all I need ready code for a simple paint program today for me ics projct plz give me a halp on this give me what you have with you and it is so good if it look like this : Design a GUI based drawing Java application that works like a simple paint
-
My USB port wont work and computer is almost brand new
I have plugged in my iPhone 4 and synced it with my Macbook Pro when I first got it, now when I just tried to plug in a iPhone 5 it says there is a USB device already plugged in taking too much power and once it is unplugged my other USB devices will
-
How to unlock my iphone using different carrier
how to unlock my iphone using different carrier? I Can't Unlock it using SMART carrier from the philippines
-
can anyone help?