Displaying text editor

Hello Experts,
I have a pushbutton on a screen and clicking on that would display a text editor along with long text of that pushbutton.I dont know how to create container etc, so I am not able to make out how to solve this problem.Can anyone please help?

hi priya,
if your reqiurement says that i need to display text editor and save it to the internal table then use
the following code.
TYPES: BEGIN OF ty_text,
         text(74) ,
        END OF ty_text.
DATA:
      t_terms TYPE STANDARD TABLE OF ty_text with header line.
EDITOR-CALL FOR t_terms.
loop at t_terms.
write t_terms-text.
endloop.
enter a valid text
and press save .
the data will be reflected back in your table.
check for EDITOR-CALL syntax for other opeartions like display and giving your own title.

Similar Messages

Display text editor

is there any class available for displaying text in the text editor on the screen.

found my self
<b>
call method text_editor->set_text_as_r3table
</b>

Long Text Editor displaying & incorrectly.

Hi Experts,
                Currently I am facing an issue that the & sign is not being displayed correctly in the Long text editor. It is shown as '<(>&<)>' in some places and '&' in others. I understand that the <(> symbol is used as protection for special symbols like &, however this is occuring in some places and not in others. Is there any package which fixes this problem??
                  Please help.
Thanks,
Aditya.

Hi Naimesh,
                   My problem is not with the display of variables in the editor. Consider the case wherein transactional data is displayed in Long text. For example if you go to IW22 and decide to change the text for the notification description. In case you give a & sign in the long text - it will be converted to - '<(>&<)>' , when I log on to see the changes I made the next time. However I want the editor to stop this conversion. Please reply.
Thanks ,
             Aditya.

Display instantly the length of the text entered in the rich text editor

Hi everybody,
I'm developing an apex application with apex 4.1.1 and Oracle 11.2.
I have a page in which I have a form that allows to create a new message on the database.
A message has a title, description, text and date.
For the text I use the item "rich editor text". The problem is that item doesn't show the length of characters entered (character counter for the textarea). In the database the corresponding column is varchar2(2000). What I do is a validation after submit that checks if the limit 2000 was exceeded or not.
But what I want to do more is to display instantly the length of the text entered in the editor. I have tried to do that through a dynamic action. But the event "onChange" for the item "rich text editor" didn't work.
Has anyone any idea about that issue?
Thanks for helping.
Kind regards,
Edited by: Khadija Khalfallah on Apr 25, 2013 4:06 AM

sorry about that, I missed that tidbit in your OP... well I think there is a good reason why there isn't a count character option -- due to the hidden "html" characters responsible for the "richness" (bold/color, etc) applied to the text would be difficult to count true characters.. if I was bent on doing this, I'd continue using the item you are using, but have a HIDDEN text area that is updated via javascript onkeyup for each keystroke (again, keeping in mind you'd have to filter certain keys) and then that intelligence could be used. I would probably dig through the javascript responsible for the rich text editor (is it still fckeditor??) -- there might already be code in there that isn't clearly visible to you that does this already.. alas, I see now the validity of your challenge.

JHS setting for the Display Type of Rich Text Editor

In the "Display Type" settings for an item, there is no option in the JHS Definition Editor to choose a "Rich Text Editor" type. Is that intentional or an oversight?
Thanks,
Gary

Gary,
don't know why it's left out, but you can implement a rich text editor with a custom template (that's the answer I got when I asked the question several months ago). Here's the template code I use for implementing a rich text editor in a table:
#macro (EDITOR_POPUP)
<af:popup id="${JHS.current.item.bindingName}Popup" contentDelivery="lazyUncached" eventContext="launcher">
<af:dialog modal="true" resize="on" title="#TEXT_EDITOR_TITLE()" id="${JHS.current.item.bindingName}Dialog">
<af:richTextEditor rows="10" columns="100" #ITEM_VALUE_IN_FORM()
simple="true" id="${JHS.current.item.bindingName}EditorText"/>
</af:dialog>
</af:popup>
#end
#set ($popupId = ${JHS.page.addPopup("${JHS.current.item.bindingName}Popup","${JHS.engine.fullNamingContainerPath}","#EDITOR_POPUP()")})
#set ($popupDialogId = ${popupId.replaceAll("Popup","Dialog")})
<af:panelLabelAndMessage #ITEM_RENDERED_IN_TABLE() #ITEM_PARTIAL_TRIGGERS() #ITEM_HINT()>
<af:richTextEditor #ITEM_ID_IN_TABLE() #ITEM_VALUE_IN_TABLE() #ITEM_PROMPT_IN_TABLE()
#ITEM_REQUIRED_IN_TABLE() #ITEM_ROWS() #ITEM_COLUMNS()
#ITEM_READ_ONLY_IN_TABLE() #ITEM_ADDITIONAL_PROPERTIES()
#ITEM_DISABLED_IN_TABLE() #DEPENDS_ON_ITEM_PROPS_TABLE()
simple="true" partialTriggers="${JHS.current.item.bindingName}EditorLink ${popupDialogId}">
#REGULAR_EXPRESSION_VALIDATOR()
#VALIDATOR_BINDING_IN_TABLE()
#NUMBER_CONVERTER()
</af:richTextEditor>
<af:commandLink id="${JHS.current.item.bindingName}EditorLink"
#JHS_PROP("rendered" $JHS.current.item.renderEditorLinkInTable)
immediate="true" partialSubmit="true">
<af:showPopupBehavior popupId="${popupId}"/>
<af:image source="/jheadstart/images/editor.gif" id="${JHS.current.item.bindingName}Icon"
clientComponent="true"/>
</af:commandLink>
</af:panelLabelAndMessage>
#ITEMS_DISPLAYED_AT_RIGHT_IN_TABLE()

Rich text editor (apex 4.0)

using blue gray theme and a page with a rich text editor. Expanding the rich text options displays the text body p below the text area that persists even if you close the rich text options. Anybody know how to get rid of that behavior?

I think your mixing 2 technologies.
At 1 side you have xml in combination with xsl (style sheets used in BI Publisher and FOP) to generate your pdf. And at the other side you have HTML...
XML and HTML are 2 entirely different technologies which you can not mix this simple. I investigated the same problem as you had, and in the end I ended up using jasperreports instead of FOP.
Maybe BI Publisher has some html regions which you could insert into your word document but I doubt it cause more people have asked the same question on this board...
So my advice: use jasperreports (also it is free for commercial usage)
Success
Br,
Nico

Text Editor using cl_gui_textedit

Hi,
I need a text editor box on selection screen in display mode. and I'm using cl_gui_textedit class to get it.. but for some reason its not working.
Here is the code below -
report YLTEST1
       no standard page heading line-size 255.
DATA: g_text_editor             TYPE REF TO cl_gui_textedit,
      g_text_container          TYPE REF TO cl_gui_custom_container,
      g_gen_text_editor         TYPE REF TO cl_gui_textedit,
      g_gen_text_container      TYPE REF TO cl_gui_custom_container.
DATA: WORDWRAP_POSITION LIKE CL_GUI_TEXTEDIT=>M_WORDWRAP_POSITION.
data: g_gen_txt_container       TYPE scrfname VALUE 'GENERAL_TEXT_FOR_REPS'.
DATA: TEXT_TAB      TYPE STANDARD TABLE OF LINE.
parameters: p_check.
at selection-screen output.
Create sales Text container
WORDWRAP_POSITION = 100.
IF G_GEN_TEXT_CONTAINER IS INITIAL.
        CREATE OBJECT:
             G_GEN_TEXT_CONTAINER EXPORTING CONTAINER_NAME = G_GEN_TXT_CONTAINER,
             G_GEN_TEXT_EDITOR    EXPORTING PARENT = G_GEN_TEXT_CONTAINER
             WORDWRAP_MODE = CL_GUI_TEXTEDIT=>WORDWRAP_AT_FIXED_POSITION
             WORDWRAP_POSITION = WORDWRAP_POSITION
             WORDWRAP_TO_LINEBREAK_MODE = CL_GUI_TEXTEDIT=>TRUE.
ENDIF.
IF not G_GEN_TEXT_CONTAINER IS INITIAL.
Set container options
CALL METHOD: G_GEN_TEXT_EDITOR->SET_TOOLBAR_MODE
                              EXPORTING TOOLBAR_MODE   = 0,
               G_GEN_TEXT_EDITOR->SET_READONLY_MODE
                              EXPORTING READONLY_MODE = 1,
               G_GEN_TEXT_EDITOR->SET_STATUSBAR_MODE
                              EXPORTING STATUSBAR_MODE = 0,
               G_GEN_TEXT_EDITOR->SET_AUTOINDENT_MODE
                              EXPORTING AUTO_INDENT    = 1.
Pass the text to the sales text container
CALL METHOD G_GEN_TEXT_EDITOR->SET_TEXT_AS_STREAM
    EXPORTING
      TEXT = TEXT_TAB.
endif.

Try this way:
DATA: lo_dock TYPE REF TO cl_gui_docking_container.
DATA: lo_text_editor TYPE REF TO cl_gui_textedit.
DATA: lt_tab TYPE STANDARD TABLE OF char80.
DATA: la_tab LIKE LINE OF lt_tab.
DATA: w_carrid TYPE sflight-carrid.
** Selection Screen
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE aaa.
SELECT-OPTIONS: s_carrid FOR w_carrid.
SELECTION-SCREEN: END   OF BLOCK blk1.
INITIALIZATION.
* Docking container
CHECK lo_dock IS INITIAL.
CREATE OBJECT lo_dock
    EXPORTING
      repid     = sy-cprog
      dynnr     = sy-dynnr
      ratio     = 80
      side      = cl_gui_docking_container=>dock_at_bottom
      name      = 'DOCK_CONT'.
IF sy-subrc <> 0.
    MESSAGE 'Error in the Docking control' TYPE 'S'.
ENDIF.
* Text Editor
CREATE OBJECT lo_text_editor
    EXPORTING
      parent                 = lo_dock
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set text
la_tab = 'This is test'.
APPEND la_tab TO lt_tab.
CALL METHOD lo_text_editor->set_text_as_r3table
    EXPORTING
      table           = lt_tab
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh Patel

Line breaks in text editor

Hi,
I am facing the problem that when I read the content of the
texteditor, store it in a javascript variable, and then write it
again into the editor area, all line breaks (not html line breaks,
just the line breaks for the code structure) are gone.
For Example if the content of the Editor is the following:
Test line 1
Test line 5
If I know call my function the value of the texteditor will
be somethign like: "Test line1 Test line 5"
I tried finding the linebreaks and replacing them (either \n,
\r or \n\r) but had no success in doing that.
My code of the function:
var theDom=dw.getDocumentDOM();
var temp = theDom.documentElement.outerHTML;
theDom.documentElement.outerHTML="";
theDom.documentElement.outerHTML=temp;
So I assume Javascript and dw are using different formats,
but I cant find much information about whats being used.
Any help appreicated!
Best,
David

Hi Brent,
Use CHR(10) in text editor for a new line. for example( 'SAP' & CHR(10) & 'Visual' & CHR(10) & 'Composer') will display like,
SAP
Visual
Composer
Hope it helps....
Regards
Basheer

How to call text editors in smart forms?

In my module pool program,I included text editors for three fields.I want that fields in smart forms too.I need to know how these text editors are called in smart forms?

Hi achu,
Any text that gets saved has a corresponding entry in table STXH table. It usually has the following parameters : TDOBJECT,TDNAME,TDID and TDSPRAS.
What you have to do is create a new text element and under general attributes ---> Type - give Include Text.
And in the include text you give the above four parameters which correspond to the text you want to display.
P.S. Do not forget to check the 'No error if no text exists' checkbox.
Hope this helps.
Regards,
Arun

How to call a text editor from a module pool program

Hi All,
I want to call the text editor from my modulepool program. Enter my text in it and save it.This text needs to be saved in a Z-program with 2 fields as primary keys. The next time while I call this same record from this z table, I need to fetch the existing text and display it.
The user now can put in additional text and can again save it. This process thus goes on..
If anyone has worked in this type of scenario, then please help me in doing this.
Useful answers will surely be rewarded.
Thanks,
Susanth.

Hi Sushanth,
We save the text not as fields in a ztable directly but as a text.Please check the format below since it is based on a working code....
first you need to create a text in s010 transaction...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

When I click on - View - Page Source, I want to edit with NotePad - note just display text in fancy colors

I like to edit my web pages easily,
- click to see html, edit it, (file name already there), save it
- hit restore on browser - see what I did -
Just changed from IE
which gave me NotePad, which is just fine for me
Just changed to FireFox
and it displays text in a non-editor,
can't edit and save easily
What to do??
Even worst - after installing FireFox
IE no longer clicks to NotePad
but that fancy non-editor :-(((

ViewSourceWith: https://addons.mozilla.org/firefox/addon/394
See also:
http://kb.mozillazine.org/view_source.editor.external
http://kb.mozillazine.org/view_source.editor.path

How to create a text editor, the one like header text in PO

Dear Ones,
My requirement is that I want to create a text editor for storing terms and condition plant wise.
The editor should be the one like header text in PO. It can take end number of lines.
I created the text object ('TERMS') in table ttxob and text for it in table ttxot.
Also created text id ('L000' and 'L001') in table ttxid and text for it in table ttxit.
Now using FM read_text, save_text and edit_text, I have written a program but it does not save the data.
When I run the program initially it displays me blank, then I enter some data into it. Again when I come back it displays the data and also saves the edition. But if I close my session the data is gone.
It means it is not actually saving the data in database. My code is as below:
*& Report ZAK_TEXT_EDITOR
REPORT zak_text_editor.
DATA : head TYPE STANDARD TABLE OF thead WITH HEADER LINE,
       line TYPE STANDARD TABLE OF tline WITH HEADER LINE.
DATA : tdname TYPE thead-tdname.
SELECTION-SCREEN : BEGIN OF BLOCK blk WITH FRAME TITLE text-001.
SELECTION-SCREEN : SKIP 1.
PARAMETERS       : id TYPE thead-tdid OBLIGATORY
                           MATCHCODE OBJECT zak_textid.
SELECTION-SCREEN : SKIP 1.
SELECTION-SCREEN : END OF BLOCK blk.
START-OF-SELECTION.
CONCATENATE 'TERMS' id INTO tdname.
head-tdobject   = 'TERMS'.
head-tdname     = tdname.
head-tdid       = id.
head-tdspras    = sy-langu.
head-tdlinesize = 132.
APPEND head.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                        = sy-mandt
      id                            = id
      language                      = sy-langu
      name                          = tdname
      object                        = 'TERMS'
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
IMPORTING
    HEADER                        =
    TABLES
      lines                         = line
   EXCEPTIONS
     id                            = 1
     language                      = 2
     name                          = 3
     not_found                     = 4
     object                        = 5
     reference_check               = 6
     wrong_access_to_archive       = 7
     OTHERS                        = 8.
IF sy-subrc <> 0.
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        client                = sy-mandt
        header                = head
      INSERT                = ' '
      SAVEMODE_DIRECT       = ' '
      OWNER_SPECIFIED       = ' '
      LOCAL_CAT             = ' '
    IMPORTING
      FUNCTION              =
      NEWHEADER             =
      TABLES
        lines                 = line
     EXCEPTIONS
       id                    = 1
       language              = 2
       name                  = 3
       object                = 4
       OTHERS                = 5.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
CALL FUNCTION 'EDIT_TEXT'
    EXPORTING
    DISPLAY             = ' '
    EDITOR_TITLE        = ' '
      header              = head
    PAGE                = ' '
    WINDOW              = ' '
      save                = 'X'
    LINE_EDITOR         = ' '
    CONTROL             = ' '
    PROGRAM             = ' '
    LOCAL_CAT           = ' '
IMPORTING
    FUNCTION            =
    NEWHEADER           =
    RESULT              =
    TABLES
      lines               = line
   EXCEPTIONS
     id                  = 1
     language            = 2
     linesize            = 3
     name                = 4
     object              = 5
     textformat          = 6
     communication       = 7
     OTHERS              = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

CONSTANTS:
line_length TYPE i VALUE 254.
DATA: ok_code LIKE sy-ucomm.
DATA:
Create reference to the custom container
custom_container TYPE REF TO cl_gui_custom_container,
Create reference to the TextEdit control
editor TYPE REF TO cl_gui_textedit,
repid LIKE sy-repid.
START-OF-SELECTION.
SET SCREEN '100'.
      MODULE USER_COMMAND_0100 INPUT                                *
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
The TextEdit control should only be initialized the first time the
PBO module executes
IF editor IS INITIAL.
    repid = sy-repid.
Create obejct for custom container
    CREATE OBJECT custom_container
      EXPORTING
        container_name              = 'MYCONTAINER1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        others                      = 6
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT editor
      EXPORTING
         wordwrap_mode          =
                cl_gui_textedit=>wordwrap_at_fixed_position
         wordwrap_position      = line_length
         wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                  = custom_container
      EXCEPTIONS
        error_cntl_create      = 1
        error_cntl_init        = 2
        error_cntl_link        = 3
        error_dp_create        = 4
        gui_type_not_supported = 5
        others                 = 6
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT

Newbie help with sample Studio app. "Plain Text Editor"

I'm trying to make the jump from AppleScript to AppleScript Studio, and because I want to eventually write a document producing application I thought I'd start with the textbook example "Plain Text Editor" included with Xcode. I think I see how menu items are connected to "Target/Actions," and I was able to build and run it without difficulty. It's remarkable how little AppleScript had to be written to produce a rudamentary text editor. But in playing with the built application, I noticed that the Revert menu item does not work exactly as expected.
If you create a text document, and then make some change to it, and then click the Revert menu item, you get the expected little dialog asking if you want to revert to the most recently saved version, but if you then click the Revert button, the text displayed in the text view object does not revert to the original. However, something is happening, because whatever code is behind the Save, Close, and Quit menu items does seem to be "aware" that the Revert item has been invoked: because if you click one of these after Revert, the "do you want to save changes?" warning doesn't appear, just as one might expect.
The Revert menu item seems to be connected to a "Target/Action" called "revertDocumentToSaved:" which sounds perfectly reasonable. But does the fact that Revert doesn't cause the displayed editing text to revert mean that (a) there is a bug in the code behind this Target/Action, or (b) that the writer of this textbook example just didn't bother to do everything needed for the Revert item to work in an intuitive manner?
Whichever the answer, what would I do to make it work properely?
It seems like there must be some sort of connection between the text view object in the editing window, and the Close, Save, Quit suite of menu items, because the behavior of these is dependant on whether or not there are unsaved changes in the text view object. But looking through the Inspector for this object, I don't see any, neither AppleScripts, nor Outlets, nor Target/Actions. Where and for what should I be looking?
Dual 1.2 GHz Mac OS X (10.4.8)
Dual 1.2 GHz Mac OS X (10.4.8)

I think -- and I'm sure someone will correct me if I'm wrong -- that this is a place where AppleScript Studio's implementation just isn't done right. Either they intended to add a "revert" handler somewhere and forgot, or else they meant to have it send an existing message and didn't.
I haven't done any document-based applications -- heck, I've only dabbled slightly in AppleScript Studio -- so there may be a "deeper" answer to this, but you might consider just hooking the menu item up to send its "choose menu item" handler to your document script, and have it react accordingly.

How to Set Up TextEdit as an HTML or Plain Text Editor?

How to Set Up TextEdit as an HTML or Plain Text Editor?

Well,
There are 5 choices to choose from on the page. In the description of the choices at the bottom of the page there are 7, and the two additional choices talk about having to first have registered the site with SSO. So...I'm interpreting that as meaning that other 2 possible choices would be displayed if the site is registered with SSO. That, plus the fact that the page which describes how to add the site to SSO seems to think that the SSO choices are displayed in the wizard.
So, no, there's no "exact launguage" that says what the reason is for the choices not being displayed. Can you point me to some exact language that tells me how to get those choices displayed?

Text Editor from ALV grid

Hello Experts,
                 I have an ALV Grid where the last column is displayed as push buttons. When i click on a pushbutton, a text editor is opened up using ABAP OO. Now, I enter the text and SAve it. A standard text is created against the selected row in ALV Grid. Then I come back to the alv grid and click on another button of some different row. Again the text editor opens up with the previous text. I nter the new text and click on save. However, this time the standard text is not created. I have am making the container and text editor free as i click on 'back'. Still the data is not getting refreshed.
Please, let me know where m i going wrong.
Regards,
Sonal

Hi Sonal,
I have faced similar issue with respect to module pool with container on the screen.
Try using the following on back action....
call method wf_init_edit->delete_text.   (wf_init_edit -> editor reference - type ref to cl_gui_textedit )
Also we can free the container using
call method wf_init_cont->free.             (wf_init_cont -> container reference - type ref to cl_gui_custom_container )
Hope it helps.
Regards,
Byju

Displaying text editor

Similar Messages

Maybe you are looking for