DM6.0 Extension Manager v1.2.107 not d/l newer extension

Hi Folks,
I have not been on line due to back surgery and recovery
(ouch, yes it still hurts) I have tried to down load some newer
navigation aids and a newer style menu, but extension does not llow
it?
What to do?
Does anyone know older navigation aids and a nice style menu,
that will work with my present. Freeware ore paid it does matter as
long as it will function with DW MX, I started out with DW#(those
where the days).
Please help any old newbie (service connected vet fm the
'nam)
Thanks in advance for any and all help.gregor

This is as designed. Extension Manager doesn't support After Effects. If the extension you want to install is a .ZXP file, you can install it anyway. I guess it will be shown in "Others" after installation.

Similar Messages

  • My email acct is no longer valid, trying to change email/apple id, but I'm unable to.  Manage id/email will not accept my new gmail acct.

    My email acct that is also my apple ID is no longer a valid acct.  I have tried to change my email in the "Manage email/apple ID" but it will not accept my current gmail.com address.  Any suggestions?  I hope if someone has any suggestions that I'll be able to access them, since the email with Apple is no longer valid.  As an example, I no longer receive email receipts from iTunes because the email associated with my ID is no longer working.  Please help with this dilemma.

    What Mac or mobile device are you using, with what operating system?

  • Not reflecting the new value of the AWvariable

    I am working with Jdeveloper and BI beans
    we are using Java Analytical workspace API for connecting and saving the user input as a Analytical workspace Variable
    by using fallowing code
    awConn.executeCommand("awvariable=value");
    here the problem is i can not made this assignment perminent in Analytical Workspace
    i.e after execution of the program i checked with AnallyticalworkSpace manager's worksheet it not reflecting the new value of the AWvariable. It is showing only old value.
    how can i do that assignment it from java api .
    any one can help me

    That other post looks different, though - the OP is now manipulating the model.The OPs statement of the problem was:
    Adding new data to the exitsting model causes the JList to display blank when I refresh the screen.
    The suggestion in the other posting was to change the model not the array and the tutorial has a working example of this.
    The OPs question was:
    When my action performed creates a new instance of the model everything works fine but is this how it should work?
    The answer to this is no, you don't need to change the model, just update the model.
    So if the OP read the other posting and read the tutorial they should have an answer to their problem.
    As you suggested there is no need to create a custom model. The example in the tutorial uses the default list model, if the OP read the tutorial they would know that.

  • Error while posting batch managed stock in 107 movement type?

    Hi All,
    Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
    and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
    regards,
    Sanjana

    Hi,
    spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
    107     SGTXT
    107     WEMPF
    Check here 107 mvt type there or not if not then put.
    101     CUSTNAME
    101     GRUND
    101     SGTXT
    101     WEMPF
    102     SGTXT
    102     WEMPF
    103     SGTXT
    103     WEMPF
    104     SGTXT
    104     WEMPF
    105     SGTXT
    105     WEMPF
    106     SGTXT
    106     WEMPF
    107     SGTXT
    107     WEMPF
    108     SGTXT
    108     WEMPF
    109     SGTXT
    109     WEMPF
    110     SGTXT
    110     WEMPF
    Regards
    Rakesh

  • The name 'weblogic.management.home.localhome' is not bound in this context

    1. I am trying to run a WebLogic ant target to deploy an web application to WebLogic 8.1. The following is the ant target.
    <target name="deploy" >
    <echo message="ear.file = ${ear.file}"/>
    <wldeploy action="deploy"
    source="${ear.file}"
    name="${application.name}"
    verbose="true"
    user="${weblogic.admin.user}"
    password="${weblogic.admin.password}"
    adminurl="${weblogic.admin.url}"
    debug="true"
    targets="${weblogic.server}"/>
    </target>
    2. I got the following error:
    C:\jdeveloperworkspace\CART\cart\build\build.xml:107: weblogic.management.deploy.utils.MBeanHomeToolException: Unable to connect to server t3://127.0.0.1:7777 as user weblogic.
    Reason: javax.naming.NameNotFoundException: The name 'weblogic.management.home.localhome' is not bound in this context
         at oracle.javatools.jndi.HashContext.lookup(HashContext.java:132)
         at javax.naming.InitialContext.lookup(InitialContext.java:351)
         at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(MBeanHomeTool.java:174)
         at weblogic.Deployer.runBody(Deployer.java:721)
         at weblogic.utils.compiler.Tool.run(Tool.java:192)
         at weblogic.utils.compiler.Tool.run(Tool.java:147)
         at weblogic.Deployer.runMain(Deployer.java:574)
         at weblogic.Deployer.mainWithExceptions(Deployer.java:586)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy.java:269)
         at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.java:210)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
         at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
         at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:293)
         at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java)
         at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
    Check option -adminurl, -username and -password.
    3. The interesting thing is: if I use JDeveloper's *.deploy Profile to deploy the same EAR file, it works fine.
    4. If I run the same ant target in other IDE, say IntelliJ IDEA 5.1.2, it also works fine.
    Any thoughts?
    Sean

    Sean,
    Are you certain you a referencing the correct port in the admin url its generally defaulted to 7001 on weblogic. Thats all I could think of off the top of my head. Post back if you still have issues.

  • Manage-bde command is not generating recovery key on network location

    Hi,
    I am trying to save the recovery key to the network share location and start up key in the USB drive while enabling bit locker.When the OS drive gets encrypted, the default folder for recovery password shows that it contains 1 file but not getting anything
    inside it when i checked the properties of the folder.
    i have already changed the group policy as "choose default folder for recovery password".
    I am using the command to enable the bit-locker as "manage-bde.exe -on C: -rk
    <network location to save recovery key> -sk <location of the USB drive>
    -rp to enable the bit-locker. It is generating the start up key in the USB but not the recovery key on network share.
    Can anyone suggest what i am missing or what else i should do to generate the recovery key on network share.
    Does manage-bde process be able to save the recovery key on network share or it hand over to some other process to perform this task.
    Thanks
    Gaurav Ranjan

    I got you Manoj, but I want to ask you one think that what if i lost the startup  key or my USB stick. I have my recovery key on the network share.  In order to log-in my machine I need the recovery password. From where i will get the recovery
    password(48 digit). Surely from the recovery key on the network share. So how can i get the recovery password if only we have the recovery key.
    I know both are different in context. Both are two different thing. I have lost my USB stick along with the recovery password and I have to log-in my machine. How can i do that i want to know that. Do there is any method to get recovery password from the
    recovery key on network share. I have retrieved the recovery password when the recovery key in AD. But this time it is on network share.
    Also one think which I need to solve is that the manage-bde -protectors -add command creates a new .bek file along with the older one. So the .bek file which get shown at the time of the start up of the machine is different from that stored in the network.
    So i am getting confused as which .bek file is for which machine and hard to retrieve the password.
    Is there any method to store recovery key on network without the -protectors -add command line so that both the .bek file should be matched and can easily be known for indiviual machine in an OU. As if both the .bek files will be different it would be difficult
    to to retrieve the recovery password for the machines.
    Please do inform if you need some more information about the scenario if i missed something.
    Thanks
    Gaurav Ranjan

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
    is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open  Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    I am using follwoing string
     <connectionStrings>
    <add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
     </connectionStrings>
    Guide me What I do?

    Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
    the DSN. It's better if you add a System DSN.
    Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
    driver specified". See this KB article:
    http://support.microsoft.com/kb/942976/en-us

  • Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

    Hi,
    We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
    Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
    I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
    Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
    Thanks
    Jaz

    Hi Torsten,
    Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
    Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
    At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
    anyone else has seen this behaviour and how it was fixed.
    Thanks
    Jaz

  • Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

    Hi All,
    I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    awebsctl.log file has below errors:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
    Catalog Website is working.
    Thanks & Regards, Kedar

    Hi Jason,
    Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
    IIS Website: Default Web Site
    Port Number: 80
    with default value for Web Application Name configured.
    For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate. 
    Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
    Possible cause: The designated Web Site is disabled in IIS. 
    Solution: Verify that the designated Web Site is enabled, and functioning properly.
    For more information, refer to Microsoft Knowledge Base.
    And awebsctl.log has the below error lines:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    STATMSG: ID=8100
    What should I check from IIS side?
    Application Catalog Website is functioning properly.
    Thanks & regards,
    Kedar
    Thanks & Regards, Kedar

  • The pool managing the instance is not available or the location monitoring object cannot be found - discovery progress

    Hi,
    I have installed scom 2012 with integrated SP1 on windows server 2008 R2 with integrated SP1 and SQL 2008 R2 SP2.
    The Problem I have is when trying to discovery I´m getting this error:
    The pool managing the instance is not available or the location monitoring object cannot be found
    Date: 05.03.2013 14:44:22
    Application: Operations Manager
    Application Version: 7.0.9538.0
    Severity: Error
    Message:
    Microsoft.EnterpriseManagement.Common.LocationObjectNotFoundException: The pool managing the instance is not available or the location monitoring object cannot be found.
       at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
       at Microsoft.EnterpriseManagement.Common.Internal.AdministrationServiceProxy.LaunchDiscovery(Guid batchId, IList`1 jobDefinitions)
       at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
    How can I solve this? Thank you.
    gruss Daniel Ovadia MBSS - Microsoft Dynamics CRM MCNPS

    See the article I wrote/posted here about monitoring Domain Controllers: http://adinermie.wordpress.com/2014/02/26/scom-agent-grayed-out-when-trying-to-monitor-domain-controllers/. 
    And to add an account to Local Administrators role on a Domain Controller, follow this:
    Open a command promt using the "Run as administrator" function and then run the following command.
    net localgroup Administrators /add {domain}\{user}

  • The pool managing the instance is not available or the location monitoring object cannot be found

    SCOM Environment
    Windows 2012
    SQL 2012
    Everything patched and to latest build
    I've installed SCOM using the MS SCOM guidelines.  When I attempt to discovery, I get the error in the topic.
    Here is the details of the error.
    Note:  The following information was gathered when the operation was attempted.  The information may appear cryptic but provides context for the error.  The application will continue to run.
    Microsoft.EnterpriseManagement.Common.LocationObjectNotFoundException: The pool managing the instance is not available or the location monitoring object cannot be found.
       at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
       at Microsoft.EnterpriseManagement.Common.Internal.AdministrationServiceProxy.LaunchDiscovery(Guid batchId, IList`1 jobDefinitions)
       at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
       at 
    Thank you in advance for your help

    Installed it manually, but it's not showing up as pending.
    I also set it to accept manual installs.
    Logs
    02/10/2014 10:52:20,spid60,Unknown,Failed to verify Authenticode signature on DLL 'E:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\msxmlsql.dll'.
    02/10/2014 00:00:19,spid10s,Unknown,This instance of SQL Server has been using a process ID of 2952 since 2/7/2014 4:15:57 PM (local) 2/7/2014 9:15:57 PM (UTC). This is an informational message only; no user action is required.
    02/09/2014 00:00:12,spid15s,Unknown,This instance of SQL Server has been using a process ID of 2952 since 2/7/2014 4:15:57 PM (local) 2/7/2014 9:15:57 PM (UTC). This is an informational message only; no user action is required.
    02/08/2014 00:00:59,spid15s,Unknown,This instance of SQL Server has been using a process ID of 2952 since 2/7/2014 4:15:57 PM (local) 2/7/2014 9:15:57 PM (UTC). This is an informational message only; no user action is required.
    Should I uninstall and install SQL 2008?

  • Management Studio 2008 does not refresh after table create / alter

    hello
    Management Studio 2008 does not refresh after table create / alter, why?
    f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
    regards, jan

    Hi jm,
    I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
    or concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • SQL MP - System Center Management Health Service Credentials Not Found Alert Message

    Hi Dears,
    I have read so many open cases, but I could not find solution to my situation...
    Error: System Center Management Health Service Credentials Not Found Alert Message
    Desc are 1 of those 2:
    An account specified in the Run As profile "Microsoft.SQLServer.SQLDiscoveryAccount" cannot be resolved.
    An account specified in the Run As profile "Microsoft.SQLServer.SQLDefaultAccount" cannot be resolved.
    Okay, I am fine, I  verify the RunAs account configuration and yes this is the problem... I was able to solve it for those SQL running servicec account using domain user account, I created the run as account, and assoistte it with SQL profiles,
    and it is fine....
    BUT, what about my 8 SQL Servers running SQL Service Account under System and Network accounts,
    so how Can I add this coz I cannot target all objects,so what shall I target (Object Health Service or WHAT)?
    Please I need it step by step coz I am not able to handle this issue....
    Thank you Guys

    Hi,
    If you have not distributed the Run As Account to a system, but we discovered SQL on it, you will see the error message.
    This condition may have occurred because the account is not configured to be distributed to this computer. To resolve this problem, please distribute the account to this computer if appropriate. You can refer to the following blog to distribute the Run As
    credential.
    Niki Han
    TechNet Community Support

  • SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

    Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
    to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
    about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
    I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
    but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

    Hi,
    Please try setting the credentials of the datasource.
    1. Double click and open the datasource in your project.
    2. Click on the credentials tab, and click on option button 'Use this username and password'
    3. Enter the username and password to connect to the datasource
    4. Deploy or upload the datasource to the report server and try accessing the reports.
    Hope this helps.
    Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
    BH

Maybe you are looking for