.DNG files load terribly, terribly slow with the Adobe Codec on Windows (8)

It's not my hardware or rig, as CR2s loaded instantly and I'm on an SSD, and the DNGs also load immediately with adobe software.
Is there anything I can do about this? I don't want to have to load up lightroom just to browse through my DNGs.

You could do a search for another codec.  Or you can just work on your original raw files.  Do you have a compelling reason to convert to DNG?

Similar Messages

  • I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

    I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?  Thanks!

    This is the last paragraph from my very first response to you, post #1 in this thread:
    …Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs.  [emphasis added]

  • My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

    My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
    I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
    HELP PLEASE
    Very worried!!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Facebook loading is very slow with nearly no images , i'm using mac

    facebook loading is very slow with nearly no images , i'm using mac os x 10.8

    i did it many times and the same problem exists

  • My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    That sounds horrible. There are a number of reasons it could occur.
    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

    I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

    You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Hi, i have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)

    hi good morning,
    I have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)
    can you help us with this problem?

    Hi, thanks for the fast response.
    This is the Extended Font Pack i have installed on the Terminal server.
    what do you mean by properly embedded? how can i check that?
    BR
    Eric Mizrachi

  • Make a file extension to open always with the same app

    Hello, do you know how can I make a file extension to open always with the same app. So far I have been doing it by double click > open with > other > and then mark open always with this app, BUT
    I do not want to do this very time with all the same file extension I have in my hard disk, is there any way, like in windows, to select and preset a determined app to always open all files with the same extensión in my hard disk??
    Actually what I´m experiencing and would like to change is to open always .pdf extensión with Acrobat and not with Preview
    Thanks very much in advance for your help!!

    OK!!!!
    Got it!!!
    Thanks anyway!!

  • Due to Photoshop Elements 12 Organizer I uninstalled the program.  When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available.  I have tried loading Photoshop Elements 12 from the Adobe web site

    Due to Photoshop Elements 12 Organizer I uninstalled the program.  When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available.  I have tried loading Photoshop Elements 12 from the Adobe web site without success.

    The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load.  I can load the editor from its .exe file but not the organizer.

  • Cannot open Word File because "there are problems with the contents"

    Hi Everyone,
    I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2.  Please help as I need this doc for work meeting this morning.  Nothing special about this doc but links were copied into it???  However I do that all the time.  I have never had this happen before.  I am on a 2010 machine.  I just ran a disk permissions repaired and emptied the trash but still no dice.  I had several other word docs up as well when I got up this morning but they are all fine.  I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
    Thank you,
    sb

    Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor?  Not sure what happened here but hope it doesn't happen again?

  • Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    wmv is a Windows Media format.  I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
    You need
    Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
    After installation a new Flip4Mac pane will appear in System Preferences.  Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
    or play the files with VLC
    VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
    While you're at it you might install:
    Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
    Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
    Perian doen't do WMV but it's handy to get many things to play in Quicktime.
    Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

  • I apparently got stung with the Adobe flash virus.  Now I cannot open any .pdf files from the internet.

    I apparently got stung with the Adobe flash virus and now I cannot open any Adobe .pdf files from the internet.  Fix?

    Go to F_Secure's Flashback Removal Tool web page, download their Flashback trojan detection/removal tool, and follow the instructions you find there.
    Also install the latest java update which also tries to remove these trojans.
    Java for OS X Lion 2012-003
    And only download the adobe flash plugin from the adobe site.
    Update:
    Just because you cannot download pdf may not be an indication of the trojan.  There's been a number of reports about problems like that with pdf's.  Look at the More Like This section on the right side of this page.

  • Cannot install a .dmg file.  It is associated with the wrong file

    Cannot install a .dmg file. It is associated with the wrong file and I don't know which is the right file.
    Can anyone help?

    That is a Disk Utility image. You can find Disk Utility in the Utilities folder inside the Applications folder on your hard drive.

  • Separated trace file which I can read with the log viewer

    Hi All,
    I 'd like to write trace infomation.
    I know I can use the default trace.
    But I 'm looking for a way to write my application information in a separated file,
    which I can read with the log viewer.
    Can someone help me with this
    Thnaks
    Steve

    Hi epexpert,
    thaks for your reply.
    I tried it with the Filelog.
    The Problem is that it logs to the file (its not problematically) but also to the defaulttrace
    and thats not my preferred solution.
    Do you have any other ideas?
    Bye Steve

Maybe you are looking for

  • Sapliwol error

    Hi all.. While saving a document with VA01 (using the transaction for the first time on a new system) I get the following error: Error in ABAP application program. The current ABAP program "SAPMV45A" had to be terminated because one of the statements

  • How do I omit pauses when downloading classical music? Is it possible to make a single 'song' for a symphony or set of preludes?

    I only have classical music downloaded into iTunes and the system does not apear to recognise familiar formats in this genre. With somehting like Bach or Shostakovich preludes, pauses between them are bearable: but I would never wish to shuffle them.

  • Question about using container class - Map

    hi all i have a question about the following : i have two sets of data, both use a common filed as key for the map: A = {a,b,d,f,g,h} and B = {a,d,e,g,i,k}, each key has a value associated with. i need to find out the commonality, and the difference

  • Saving regions as independent files

    Is there an easy and quick way to save specific regions as their own files. I have hundreds of regions (i use garage band as a sketchbook) that i want to send to itunes as individual tracks. I only want to send the regions, not the whole track.

  • E63 and VOIP problem, pls help

    Hi Guys I got Nokia e63 and have successfully configured local VOIP number but it works when I use the " mobile internet" or " my service provider internet " as my default access point not my home wireless connection.  When I set my home wireless con