Document operations missing when using my palette

Hi,
after a lot of trial and error I have finaly managed to get a custom palette running in my Photoshop CS6. The problem I have now is that when my palette is active I am missing some functions from the Photoshop File-menu, i.e 'New', 'Open', 'Browse'. Is this to be expected?
My palette code is based on this: http://www.davidebarranca.com/2012/10/scriptui-window-in-photoshop-palette-vs-dialog/, the 'PS palette working example' section
main();
function main()
          mainWindow = createGui();
          isDone = false;
          mainWindow.onClose = function()
                    return isDone = true
          mainWindow.show();
          while (isDone == false)
                    app.refresh();
function createGui()
          window = new Window("palette", "Material Picker");
          window.center();
          return window
Could it be that this code is preventing Photoshop from running all functions?
I would really like to have this running in a dockable panel in PS but I havn't found a way yet. Any suggestions are very welcome.
Thanks,
Johan

I see.  So when you scan, copy, or fax through the ADF, it acts like everything is working fine, but nothing copies, nothing scans, and nothing faxes.  When you use the glass, scan, copy, and fax work fine.  The c6180 has two seperate scanner lamps, one for the ADF, and the other for the glass.  It sounds like the ADF lamp has gone out.  There are a few things you can try to get it working again outlined here, but most likely if it's gone, it's gone.  The scanner lamps aren't something that you can replace seperately from the printer.  To replace the scanner lamp you gotta get a whole new printer.  If you can make due, then I would hold off, but if you gotta have it and the document doesn't fix it, you gotta get a new one.  The down side to getting a new one, for you at least, is that the PhotoSmart printers don't have traditional faxing anymore.  To get taditional faxing you have to get an OfficeJet or a LaserJet.  The OfficeJets will use way less ink than the PhotoSmarts, but the photo printing quality isn't quite as good, and the scanning options tend to be more limited.  The LaserJets are the most stable printers made.  They are efficent and will last almost forever, because there isn't alot that moves so there isn't alot that can break.  The downside to LaserJets is that they can be a larger initial investment, more so if you want color printing, but they do pay for themselves in the long run.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • Flash player controls missing when using embedding in HTML

    Hi
    I have just created a Flash movie with a .flv file in flash cs4 when playing the .swf file we can see the controls of the player, when I use the html code the player controls are missing.
    it is missing when using the HTML that is generated with in flash as well.
    this is the code used for the HTML
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
    <head>
    <title></title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
    swfobject.registerObject("myFlashContent", "10.0.0");
    </script>
    </head>
    <body>
    <div>
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="272" height="400" id="myFlashContent" align="bottom">
    <param name="movie" value="walkon.swf" />
    <param name="play" value="true" />
    <param name="loop" value="false" />
    <param name="quality" value="best" />
    <param name="scale" value="exactfit" />
    <param name="salign" value="b" />
    <param name="wmode" value="transparent" />
    <param name="allowfullscreen" value="false" />
    <!--[if !IE]>-->
    <object type="application/x-shockwave-flash" data="walkon.swf" width="272" height="400" align="bottom">
    <param name="play" value="true" />
    <param name="loop" value="false" />
    <param name="quality" value="best" />
    <param name="scale" value="exactfit" />
    <param name="salign" value="b" />
    <param name="wmode" value="transparent" />
    <param name="allowfullscreen" value="false" />
    <!--<![endif]-->
    <a href="http://www.adobe.com/go/getflashplayer">
    <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
    </a>
    <!--[if !IE]>-->
    </object>
    <!--<![endif]-->
    </object>
    </div>
    </body>
    </html>
    I would really like your help on this one
    Thanks
    Rodney

    Hi,
    Please check that your swfobject.js file is located where your .swf file and.html file are published.  Your .swf file, .html file and swfobject.js should be placed on the same folder.
    In my Flash CS4 the code generated in the HTML file is different and is having 318 lines of code. But the code which you pasted below looks different. If you are not able to see the flash content only in HTML file then it might be active content blocking. Please refer the link which provides fix for active content blocking manually.
    http://www.adobe.com/devnet/activecontent/articles/devletter.html
    Thanks

  • Service Based Revenue Recognition - Prov Account Missing when using WBS

    Hi,
    I´ve activated RR functionality using service based and aceptance date.
    I've followed the intructions from the best practices documents and the notes:
    Note 820417 u2013 IMPLEMENTATION GUIDE FOR REVENUE RECOGNITION
    Note 1172799 u2013 NEW VERSION OF BEST PRACTICES FOR REVENUE RECOGNITION
    Note 678260 CONSTRAINTS
    Note 777996 u2013 ACCOUNT SETTINGS FOR  REVENUE RECOGNITION PROCESS     
    Note 779366 u2013 REVENUE RECOGNITION IN THE SD MODULE
    Note 1166848 u2013 CUSTOMIZING SETTINGS
    Note 782758 u2013 PREREQUISITS FOR USING REVENUE RECOGNITION
    Note 835367 - Activating SAP ERP SD revenue recognition
    Note 1000830 - Revenue recognition through incoming invoice (third-party
    Note 1025066 - Revenue recognition by proof of delivery (POD)
    Note 1120297 - Revenue recognition by acceptance date
    Note 1125456 - Revenue recognition due to customer-specific event
    We are implementing SD, FI (using New Gral Ledger), PS, CO and MM in a company that sells projects. Therefore we're posting everything to the WBS elements.
    We need to post the revenue values to the WBS elements too.
    The problem is that when we create a sales order for RR indicating a WBS element and try to save it, the system activates the incompletion log saying that the provision account is missing, despite the account is in VKOA.
    The strange thing is that if we use a material with profit center (without any WBS or order indication in the sales order) all the revenue recognition process runs perfectly (we save the order, VBREVK is fullfiled, VF44 is run and the invoice is done correctly).
    Does anybody know why when using a WBS element in the sales order, SAKN2 field is not fullfiled and the incompletion log is activated???
    Is it a program error? Or are we doing something wrong?
    Quick responses will be apreciated since we need to move on within two weeks!
    Thanks in advance!
                                     María del Valle Pintor.
    Moderator: This thread has been locked due to crossposting.
    Please do not post the same question in different forums.

    sap note 883544

  • How to open document from mac when using windows without transferring the file?

    How can i open a document from mac when i am using windows without transferring it?

    depend on the document program more then anything else really
    when ever I open a doc with word it make a history for undo and redo action file in the same dir
    with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
    but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
    or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

  • Opera crashed when using gmail after upgraded

    After upgraded 3 days ago,I got the problem of opera crashed when I am using www.gmail.com.
    Don't know what's wrong.Does anyone have the same problem?

    I am  one of the men who moved form firefox to opera,because opera launch faster than firefox,so I will wait another version that fix the crash problem.
    Someone said the opera8.52 is faster than opera9,is that true?
    I don't like the bt in the opera,I have my bt client better than him.

  • Iview contents missing when using FQDN Cisco Load Balancer

    Hello Experts,
    We are using Cisco load balancer to distribute the load across the portal servers. Everything was working fine, but after upgrades to the latest support package stack SP18, we ran into some odd behavior. Some of the contents on the iview are blank when using FQDN load balancer URL e.g. http://sap1234.corp.com/irj/portal .  But those blank contents does show up if we donu2019t use FQDN e.g. http://sap1234./irj/portal .  At this point we are not sure where to start troubleshooting?
    Any helps would be appreciated,
    Dave
    Edited by: davidn on Feb 27, 2009 11:50 AM

    Isn't this the same as your other post? I'm locking this one...

  • Document Splitting Error when using "Difference Posting" field in F-28/F-32

    We use the "difference postings" field to post unapplied cash when we receive customer payments.  We can normally post this without issue, but occassionally we get the "Balancing field "Profit Center" in line item 002 not filled" message.  This only happens when applying cash to a large count of open invoices (to clear or to partially pay) and have a balance that will not be applied to a known invoice.
    I have looked extensively for configuration issues and I must be missing something.
    Thanks in advance,
    Kevin

    The difference postings and partial payments post to document type DZ which is configured properly.
    The config is set for PC splitting.
    While I have some cash gl accounts defaulted to a PC, I am trying to avoid defaulting the reconcilliation accounts to a PC at this point.  I will only do that if there is no other solution to this issue.  But that is a suggestion that I am fairly positive would work.
    Thanks,
    Kevin

  • Text Missing when using PDF Convert but OK when using print PDF

    I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
    When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
    If I create the PDF with the PRINT command - everything is OK.
    PS: The same Publisher File on another computer using Acrobat Pro 8 works fine -  CONVERT or PRINT and no missing text
    I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
    [email protected]

    You're posting in the wrong forum, but you already know that...
    In any case, if you're running XP (you didn't supply any info about your environment, which is critical), there's a Microsoft HotFIX patch for PostScript printers such as Acrobat to fix the missing text problem. Do a Google for "Framemaker hotfix missing text" to locate the patch.

  • Problems with 'COMMIT MISSING' - when using ABAP client proxies

    Hi
       We have a requirement - wherein while SAP std inbound IDOCs are being processed in the R/3 system- we need to monitor the processing of idocs - by sending relevant information out of the R3 system to a monitoring dashboard - outside of the R/3 environment.
    Inorder to accomplish the above, we generated a async. client proxy class in the R3 system by pointing to a XI o/b message interface and that interface mapped on to DB calls - from which the dashboard was bringing up status of idocs being processed in R3
    We made a call to the async class method from within the idoc user exit that lies  within IDOC_INPUT_ORDERS FM . The user exit chosen to make the call was - after the salesorder processing for the inbound idoc was done in the above FM. We have not given any COMMIT WORK statement after the async client proxy method call within the user exit - since the call was being made from within user exit and we did not want to upset SAP std processing flow.
    Now, when the inbound idoc processing is being done by using SAP std program rbdapp01 using parallel processing option of packets, the outbound message generated is in 'COMMIT MISSING' status - whereas - when rbdapp01 is executed in normal mode - the proxy message is sent out ok out of the R3 integration engine.
    The program rbdapp01 has a COMMIT WORK statement after each IDOC packet is processed - but still with the parallel processing option - the proxy message stays in th R3 box - with the status 'COMMIT MISSING'
    Any thoughts/ pointers on this is appreciated....

    Hi Karthik,
    I don't think you can get this to work using an asynchronous proxy - except perhaps by spawning an update task to send the data.
    Perhaps you can re-cast this as a synchronous interface?
    Regards,
    Thorsten

  • SAPScript: Footer missing when using BOTTOM

    HI Experts,
    I have a simple form where in MAIN window I need a footer for signature information.
    I am using /: BOTTOM..ENDBOTTOM after looping the items to display the signature information at the footer of the very last page.
    However - when my items just fits into the first page - the footer (signature infor) is completely missing?
    It will not push to the second page to display.
    Example: 1 page (main window) is able to fit 50 rows (items) and suppose to display the footer info at the bottom.
    When it is less or more then 50 items - the footer info will appear perfectly. But when it is just fits as 50 items - the footer just does not display.  (this is due to my window height that fits only 50 Items MAX)
    (I had tried using PROTECT..ENDPROTECT as well but it doesnt seems to work when I use with BOTTOM.
    Kindly Advice.
    Thank You.

    Hi Lim,
    Create window for the signature and in the driver program call this window..
    at last.
          call function 'WRITE_FORM'
           exporting
           element                          = 'SIGN'
    this will display the signature after all the line items
    Regards,
    Sravanthi

  • Epson R1800 printer options missing when using AEBS wireless printing- WHY?

    I have run into a very odd problem with my Epson R1800 printer. When I install the printer for directly connecting via USB or FireWire the version 6.12 print driver appears with all of the options. When I install the same printer when connected through my AirPort extreme base station the print driver is lacking most of the adjustment features.
    Fire wire and USB contain the following menu items in the drop down print dialog"
    Print Settings (with basic and advanced tabs)
    Roll Paper Option
    Expansion
    Extension Settings
    The AEBS printer options only contains one printer specific selection called:
    Printer Features
    which has a very limited selection of options, an no options which allow me to turn off color management.
    Some additional information
    - I installed this same printer driver on one laptop back in the days of 10.5.2 and I was able to install a AEBS printer which allows all of the options. On that same computer if I now install a new printer with the same driver those extra options are missing.
    - I just upgraded a second laptop to Leopard today and went straight to 10.5.3 and the wireless driver for this printer only contains the limited menu items.
    - I am certain that I am using the Epson drivers and not the Gutenprint drivers. Please do not suggest the Gutenprint drivers, they do not handle color management properly.

    This is a real problem for this printer OS combination... I believe due to the crappy Epson driver. I searched the internet and found lots and lots of people having a similar problem. When I contacted Epson today they admitted there was a driver problem, but the tech told me they had no plans to improve the driver 'because the R1800 is a discontinued model'! How's that for support!
    Anyway...several people have had fairly decent luck removing the printer and all Epson software then re-installing it. When the 'correct' driver is installed it will say something like "Epson R1800 (sp) 1". My problem is there is no way to profile this printer and have the driver work as it should for proofing and color management. I know that doesn't help much, but if you google "Epson R1800 problems with Leopard" you'll see what I mean.

  • Footer missing when using Stripe. Has anyone experience the same when using Stripe, is there a way around it?

    I'm trying to implement Stripe onto my website. But when I insert the HTML widget, my footer goes missing, or any graphics below the widget for that matter. So weird.
    Any suggestions?
    Thank you,

    If your whole page suddenly looks weird in the browser after inserting custom HTML, the problem is usually that the HTML you've inserted isn't valid. You may be missing some close tags or something. You can use the HTML validator to check your page:
    The W3C Markup Validation Service

  • Drives missing when using Link Media

    Premiere CC 2014 is not seeing two of my RAID drives when I try to Link Media that went offline.  It's a new menu box now, and I can't find any way to make it see two of my RAID drives.
    But Premiere CC 2014 can totally see those drives, because I'm editing with other media on them.  And I can see those drives in Import.
    Import menu box is on the left.                                    Link Media is on the right.  Drives missing.
    Any thoughts?  Is this a bug?  I've already done a bunch of editing and need to be able to Relink 197 clips, not Import them and start over...
    Mac OS 10.7.5
    Oh, and in Premiere CC, the Link Media menu is the same as the import menu, so this is new to 2014...
    --jon--

    Thanks, Jeff.  Have rebooted multiple times.  The two drives are both hardware RAID 5. 
    I can Import from these drives as well as edit from them.  But when I use Link Media (after having moved media to a new folder in one of the drives), Premiere doesn't see the drives when I use Locate.  If I use Replace Footage, I can indeed see the two drives and replace each clip one by one.
    I also have two external RAID 0 drives that Premiere CAN see when I use Link Media.  But it can't see the two RAID 5 drives when try to locate offline media with Link Media.
    --jon--

  • Insrument missing when using green Apple Loop

    Greetings,
    When dragging the green Apple Loop "Bread and Butter Bass 09" onto an audio instrument track in my arrange window, the result sounds very different than dragging the loop onto an audio track. When clicking on the "Bass" on the I/O of the channel strip of the instrument track, a small beige colored window pops up which says that it is the EXS24... which looks much different than the large green EXS24 (I presume the large green window is for the sampler and the other is not?).
    Anyway, the EXS24 screen for bass says "MISSING: Thumbstroke Bass". Doing a search for Thumbstroke Bass reveals that there are three related files for this instrument on my system, and the file paths for each related file are as follows...
    For Thumbstroke Bass.pst... Hardrive/Library/Application Support/GarageBand/Instrument Library/Plug-In Settings/Bass/Thumbstroke Bass.pst.
    For Thumbstroke Bass.exs... Hardrive/Library/Application Support/GarageBand/Instrument/Library/Sampler/Sampler Instruments/Thumbstroke Bass.exs.
    And for Thumbstroke Bass.cst... Hardrive/Library/Application Support/GarageBand/Instrument/Library/Track Settings/Software/Bass/Thumbstroke Bass.cst.
    How can I get the green Apple Loop in my instrument track to sound similar to the way it sounds in the Loop Browser? If the problem is the missing instrument above (Thumbstroke Bass), then how can I get this instrument into my EXS24? Do all three files above need to be put into a special place?
    I performed a scan update in my project manager... thinking that this would insert the necessary files into my EXS24, but I noticed no change in the menus on my EXS24 (the ? sampler too).
    Thank you for the help...
    Power Mac G5   Mac OS X (10.4.8)  

    Thanks to all for the very helpful responses.
    Regarding Bee Jay's post...
    The version of Logic that I am running is 7.2.3.
    I recently added an extra internal hardrive (Seagate 500 gig, 7200 RPM) and installed the most up to date Tiger OS. I then installed Logic 7.01... a few weeks later, I upgraded Logic directly from 7.01 to 7.2.3 (bypassed 7.1).
    In the process, I copied my garage band folder and portions of my Logic folder from my Seagate to my LaCie external hardrive with the goal of accessing instruments and samples from my LaCie. During recording, Logic is running on my Seagate, but the recording path records to my original hardrive. I noticed last night that the garage band folders on my LaCie and Seagate did not have the Thumbstroke Bass sample instrument files... whereas my original MacIntosh HD does have those files.
    When installing the Tiger OS on my Seagate, I wanted to do a fresh clean install, and did not use Migration Assistant, and did not transfer any files from my MacIntosh HD which had Panther on it at the time. When updating to Tiger on the MacIntosh HD, I did a simple update preserving previous pref files, etc. (which explains perhaps why the Thumbstroke Bass files were not deleted on the MacIntosh HD).
    I have some idea of some of the reasons this can happen.
    The Garagaband instruments like "Bass", "Drums" and so on, are basically mini EXS24's. If you have a "Drums" instrument loaded, and load an EXS24 instead, the same instrument remains loaded and you can play it in the full EXS24 as normal.<<</div>
    Yes, I have noticed the same above...
    It turns out that there is a small amount of sample content that must be in a preset location - if it's not, Logic does not initialise any of the mini-EXS24's, and trying to load content that requires them will fail.<<</div>
    Thank you, that makes sense.
    My mini-EXS24's do seem to initialize, but they have the message "MISSING: Thumbstroke Bass". I presume that the small amount of sample content that *must" be in a preset location is not there... the question is... How do I get it there?
    Try going to an instrument insert slot, and see which of the Garageband instruments you have available. In 7.1.x, there should be about 15 or so instruments - if you can only see about 9 or so, and can't see "Hybrid-basic" and so on, then this is an indication that you may have missing or moved Garageband content.<<</div>
    My instrument slots show about 15 or so instruments under the Garageband instruments, and the "Hybrid-basic" is there. Should I be able to find "Thumbstroke Bass" in the instrument slot menu also? (so far, I have not been able to find it)
    See my thread here for more details on this:
    http://discussions.apple.com/thread.jspa?threadID=730936&tstart=0
    Have a look and see whether this might be the problem you are having.
    If not, then get back to me, it might be a case of your sampler instruments or samples not being found.<<
    Very helpful thread... I see some parallels to my current problem. You wrote that you had aliased your "entire AppSupport/Garageband library to an external drive, which works fine with Logic and Garageband except the sample based instruments in Logic - they seem to ignore the alias and hence can't locate the *.exs and/or the samples which they need." At the time, I did not know that I needed to create aliases, but I think that aliases were effectively created when I simply clicked and dragged the files from one drive to another, correct?
    The next step that you wrote about puzzles me... You wrote, "So after a big of re-jigging the library files around, I've ended having the "Sampler -> Sampler Files -> Hybrid Synthesisers" samples and the instrument settings in the real AppSupport/GB directory, with all the rest of the samples and GB loops on the external drive." I am confused as to which files and their paths that you are referring to...
    Don't forget that "Scan" in the Project manager does not change anything.<<</div>
    I see!
    I had forgotten that, and yes, it did not change anything.
    In order to relink your files, you'll have to perform the "Resolve instruments" option, which goes and relinks sampler instruments with their required samples.<<</div>
    THANKS!
    However, after opening the Project Manager, I cannot find anything in the drop-down menus for "Resolve instruments". How do I get there? Do I need to do another scan to get there?

Maybe you are looking for

  • How to find out no of lines in  String

    Hi all, How to find no of lines in a multi lined String. For example. String str = "hjkhjkhjhjhkhlk\nfjdhfjhdjfhjdhfj\nfdhfjdhjfhdj\ndfjdkjffjdfjk\nfdffdh"; Here there are 5 lines because there are "\n". I am not able to substring with "\n". Any idea

  • Error parsing using SAXP

    Hi all, I would like your help in the following: If I pass a file name as an argument of a parse method, it gives me an error like: java.net.MalformedURLException: unknown protocol: c However, if I pass an URL as an argument, it gives me an error lik

  • Manually installing ACR latest version on CS4 for Mac Snow Leopard.

    I cant see the Raw thumbnails or the raw previews on Bridge, and neither can open the raw files in photoshop CS4. Guess i need to install the ACR (5.6), i am new to mac OS world, zould like to know the following steps to install the ACR for raw revie

  • Itunes 10.4 fails to install on lion

    After I installed Lion on my MacBook Pro, I tried to install itunes, Software updates, or iwork updates nothing works, any help is appreciated

  • Why the DBID is same?

    I have Installed 2 databases on a same host(WinXP-32bits). They are: db_name:orcl6, orcl7 services: orcl6, orcl7 sid: orcl6, orcl7 But when I use follow command,I find the DBIDs are same. SELECT DBID, NAME FROM V$DATABASE; (display follows): DBID NAM