Does anybody have an idea how to pre-tune an apple loop that is slightly off pitch?
Aloha,
Does anybody have an idea how to pre-tune an apple loop that is slightly off pitch?
I have a great 44.1K minor key shamisen phrase sample that is 66 cents below C. I want to make it an apple loop and assign it's key to C minor. How would you suggest I do this so that when I use the subsequent apple loop it is in tune?
Thanks in advance,
Tony
Wow . . . seems strange that there are no responses. There are a lot of nice off-pitch samples out there and it would be great not to have to adjust them every time.
I did come up with a work around. Most of my sample editors introduce artifacts when I change the pitch so here's what I did. Using Sound Studio (great, btw) I made a loop and changed the pitch non-destructively. In this case my sample, played at -66 cents, became tuned to C. Noting that value, I used an internet cents to frequency converter (http://www.sengpielaudio.com/calculator-centsratio.htm) to come with the number to multiply with my original sample frequency. I changed my sample to this frequency (without resampling) then resampled it back to its original 48K. Now I was able to convert it to an apple loop perfectly tuned to C.
Cheers!
Similar Messages
-
In Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.? Anybody have any idea how to stop Mail from including my email address in the cc line when using "reply all"?
Automatically cc myself is not checked. I did find out that if you have multiple email address that all of them need to be associated with "My Contact" tab. Thanks
-
i have got an 4s phone and want to import my notes from my old 3G phone; does anybody has an idea how this can be done?
If you have a Mac, I know you can sync your notes with the Mail application using iTunes by going to the Info tab when you clikc on your iPhone under Devices. Other than that, you may just need to email the notes to yourself since the 3G cannot use iCloud to transfer them.
-
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.
It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.
-
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?
You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800 -
ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Could also be not enough free space for the iPad to operate efficiently. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
If neither of these suggestions helps, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks
You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck. -
Hi, my facebook app on my Ipad3 has stopped allowing me to put comments on. Does anyone have any ideas how to correct this? Don't know if it is a problem with the Ipad or just the facebook app. Thanks.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
Cheers, Tom -
my computer broke down and i needed to install everything new. now all my music is only on my ipod classic. does anyone have an idea how to get the music back on the computer without deleting it on the ipod?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?
Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.
-
After updating to Maverick, Photoshop cs6 is freezing up repetitively. Does anybody have any ideas about why this is happening?
After updating to Maverick, Photoshop cs6 is freezing up repetitively. Does anybody have any ideas about why this is happening?
-
Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?
Maybe you are looking for
-
Audio quality in Adobe Acrobat
I am recording audio comments directly in Adobe Acrobat 8 Professional by using the Comment & Markup Tool, "Record Audio Comment." There is some static and crackle in the inserted audio files, however if I record a sound file with the same microphone
-
REPORT ZPGI_IDOC_CREATE MESSAGE-ID ZERR. SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1 NO INTERVALS. PARAMETERS: SLSORDER LIKE LIKP-VBELN. PARAMETERS: P_MESTYP LIKE EDMSG-MSGTYP OBLIGATORY. PARAMETERS: P_LOGSYS LIKE TBDLST-LOGSYS.
-
HT204088 How can I get the answers of the security questions?
I don't remember the answers and I can't buy anything.
-
XML export root node attriubute?
Hi I need to use XML export extension to generate XML to something like this: <photos path="images/"> <photo id="1" name="Photo 1" blabla ="" url="1.jpg">This is the optional description for photo 1</photo> <photo id="2" name="Photo 2" blabla ="" url
-
Highlighting in Design View the selected code in Code View
I'm a complete newbie to DW so forgive the probable obvious question. I've loaded up a complete site template that was created outside of Dreamweaver in order to modify it for use elsewhere. I want to be able to select chunks of code in the code view