Does anyone know how to start a remote program by oracle

I have a program which would load data from a bloomberg financial data termial. We only can load bloomberg data via their termial. So, we haven't any other choice to access bloomberg data (for example, it is impossible to access data using socket).
However, because this program is a Excel application and our bloomberg terminal is not a private device, many person would use this terminal to view information and data. Obviously, this excel program would influence other user while this user try to open another excel program and want to edit data. I really want to schedule this program on specific time by the oracle database.
Another reason is that if you want to use a excel applicaiton as a data loading background program, it would work on instable status, for example, sometime it would become no response status and we hard to find any reason.
Is there any mechanism to shedule a remote program/task by oracle?

Hi coppershen,
IMHO you should think about alternative ways. I don't know Bloomberg services so I just give you some ideas to think about.
1. Is there a useable web service to use. If so, you can use the webservice within your database
2. Is there a service which will send you an XML or CSV file than you can import the data directly in your database.
3. If you use a data terminal their could be the possibility to use any terminal emulation to access the data. It is a little tricky but than you can use a program to download the data and pump it in your database.
Consider SQL*Loader as a better tool for loading data. It can interpret nearly any text data if it has a defined structure.
I will stand by for further diskussions.

Similar Messages

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock

My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

I have a Canon MG6120. When I start it I get error code 5050. Does anyone know how to resolve this?

I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
Solved!
Go to Solution.

Hello gregg.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, the unit will require service for correction. We apologize for this inconvenience. Please contact our support group using the "Contact Us" option below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I am using system 10.7.3 and my I photo 9.2.3 keeps crashing upon start up. Does anyone know how to correct this without losing my photos?

I am using system 10.7.3 and my I photo 9.2.3 keeps crashing upon start up. Does anyone know how to correct this without losing my photos?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. For privacy’s sake, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Does anyone know how I turn negatives into a positive on Aperture please? I have scanned a bunch of negs and want ot make a contact sheet. Would really appreciate some clues on where to start. Thanks

does anyone know how I turn negatives into a positive on Aperture please? I have scanned a bunch of negs and want ot make a contact sheet. Would really appreciate some clues on where to start. Thanks

Yeah, it's simple. You scan your images singly, then import them. Then, one by one adjust them. Under the adjustment brick, pull up the CURVES tool. It is one of dozens available from the pulldown menu on the left side.
So, with your image in view, you click on the adjustment tool, select CURVES (which will be at the bottom of a few other adjustment sliders such as EXPOSURE) under the Histogram and then grab the bottom of the right hand curve and swing it all the way to the left. Then grab the left hand curve and drag it all the way to the right.
The right curve represents highlights. The left curve represents shadows. Now the two are reversed. Your negative is now a positive. For added control, you can create mid-tone curves of your own and make finer adjustments. I haven't done this much so the experts might weigh in here with corrections and added advice.

I started editing a project on FCPX Trial. Does anyone know how I transfer the project to the 'purchased' FCPX now that I've bought it? Thanks.

I started editing a project on the trial version of FCPX. I just purchased the 'real' version. Does anyone know how I transfer the project to the 'purchased' FCPX now that I've bought it? Thanks.

Joshink wrote:
Thank you, Rus! Safe to assume it will be churning awhile, as it's been doing?
I wouldn't expect it to take long at all.
Is it an extremely large library with a lot of media copied to it?

I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?

I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?

What version of Photoshop are you running?
I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
see image below for example:

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

When my desktop (Mac Power 5) starts a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

My Husband turned his desktop off without shutting down now When my desktop (Mac Power G5) starts up a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

Step 1- Try booting to Startup Manager by holding Option/Alt key.
Select the boot source and click the right arrow.
Once booted, open System Preferences and select the desired boot volume.
Replacing the PRAM battery is likely wise if the machine keeps forgetting it's boot source.
If that doesn't work,
Step 2- Boot holding a mouse click, insert the OS X install disc and hold C to boot to the install disc.
Once booted, open Disk Utility and "Repair Disk" on the boot drive.
Once done, reboot normally.
More:
http://support.apple.com/kb/TS1440

I have an iPhone 5 and if I make a call it goes blank hangs up on the people and then proceeds to facetime them automatically. Does anyone know how to fix this? It only started with ios7

I have an iPhone 5 and if I make a call it goes blank hangs up on the people and then proceeds to facetime them automatically. Does anyone know how to fix this? It only started with ios7

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
http://www.apple.com/support/systemstatus/

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants. Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

Does anyone know how to start a remote program by oracle

Similar Messages

Maybe you are looking for