Does CISCO3745 support PE function?

Hi,I have CISCO3745 with 128M DRAM. I hope it can be used as PE router to provide the MPLS VPN service.Does it support PE function? How about the performance of CISCO3745 as a PE router with about 20 VPN vrfs? Thanks
SIncerely

Hi there,
Yes.Commit confirm! Just make sure the right IOS. Try to configure the VRF part.
regards,
maher

Similar Messages

[unixODBC][Driver Manager]Driver does not support this function {IM001}

Hello,
I start from the end and details show below - this error message i got in sql session:
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
If its ok and HS are licensed for SE, then please see details of my problem:
----OS and packages version
[oracle@aris_sv_db log]$ uname -a
Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ rpm -qa | grep odbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
unixODBC-libs-2.2.11-10.el5
unixODBC-libs-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
unixODBC-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
[oracle@aris_sv_db log]$ rpm -qa | grep freetds
freetds-0.91-1.el5.rf
[oracle@aris_sv_db log]$
-----ODBC.INI, ODBCINST.INI and FREETDS.CONF
[oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
[ENERGOPLAN]
Driver = FreeTDS
Servername = ENERGOPLAN
Database = ess2
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/odbcinst.ini
# Example driver definitions
[FreeTDS]
Description = MSSQL Driver
Driver = /usr/lib64/libtdsodbc.so.0
#Setup = /usr/lib64/libtdsodbc.so.0
#Driver = /usr/lib64/libodbc.so
#Driver = /usr/lib/libodbc.so
UsageCount = 1
Trace = Yes
TraceFile = /tmp/freetds.log
[ODBC]
DEBUG = 1
TraceFile = /tmp/sqltrace.log
Trace = Yes
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/freetds.conf
# A typical Microsoft server
[ENERGOPLAN]
host = 192.168.10.64
port = 1433
tds version = 8.0
# client charset = UTF-8
client charset = cp1251
[oracle@aris_sv_db log]$
----CHECK CONNECT from ODBC
[oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select count(*) from EnergyType;
| |
| 8 |
SQLRowCount returns 1
1 rows fetched
SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "cp1251"
1> select count(*) from EnergyType;
2> go
8
(1 row affected)
1> [oracle@aris_sv_db log]$
----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_ENERGOPLAN =
(SID_LIST =
(SID_DESC=
(SID_NAME=ENERGOPLAN)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
ENERGOPLAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ENERGOPLAN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
(CONNECT_DATA=(SID=ENERGOPLAN))
(HS=OK)
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = ENERGOPLAN
#HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
HS_FDS_TRACE_LEVEL = DEBUG
#HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
#HS_LANGUAGE=american_america.we8iso8859p1
#HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
#HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
#HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
#HS_LANGUAGE=Russian_CIS.AL32UTF-8
#HS_FDS_FETCH_ROWS=1
HS_NLS_NCHAR = UCS2
HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
set ODBCINSTINI=/etc/odbcinst.ini
#HS_KEEP_REMOTE_COLUMN_SIZE=ALL
#HS_NLS_LENGTH_SEMANTICS=CHAR
#HS_FDS_SUPPORT_STATISTICS=FALSE
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tnsping ENERGOPLAN
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
OK (0 msec)
[oracle@aris_sv_db log]$
----CREATE DBLINK and test from sqlplus
CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
[oracle@aris_sv_db log]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
----logs from hs and odbc
[oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
-7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
Free hoada @ 0x14e5fd20
Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
type:0
SQL text from hgopars, id=1, len=36 ...
00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
20: 22204131 [" A1]
Exiting hgopars, rc=0 at 2013/04/01-16:30:42
Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
Allocate hoada @ 0x14e5fd80
Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
Entered hgopcda at 2013/04/01-16:30:42
Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
Entered hgopoer at 2013/04/01-16:30:42
hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
[unixODBC][Driver Manager]Driver does not support this function {IM001}
Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
Free hoada @ 0x14e5fd80
hgodscr, line 464: NO hoada to print
Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
Entered hgocomm at 2013/04/01-16:31:24
keepinfo:0, tflag:1
00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
10: 32322E37 363237 [22.7627]
tbid (len 20) is ...
00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
10: 312E345D [1.4]]
cmt(0):
Entered hgocpctx at 2013/04/01-16:31:24
Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
Entered hgolgof at 2013/04/01-16:31:24
tflag:1
Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
Entered hgoexit at 2013/04/01-16:31:24
Exiting hgoexit, rc=0
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
Native = 0x7fff6ca974f4
Message Text = 0x14e5f968
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_SUCCESS]
SQLState = IM001
Native = 0x7fff6ca974f4 -> 0
Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
[ODBC][12117][SQLGetDiagRecW.c][540]
Entry:
Statement = 0x14e399f0
Rec Number = 2
SQLState = 0x7fff6ca97700
Native = 0x7fff6ca974f4
Message Text = 0x14e5f908
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_NO_DATA]
[ODBC][12117][SQLEndTran.c][315]
Entry:
Connection = 0x14dbd4b0
Completion Type = 0
[ODBC][12117][SQLGetInfo.c][214]
Entry:
Connection = 0x14dbd4b0
Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
Info Value = 0x7fff6ca9781e
Buffer Length = 8
StrLen = 0x7fff6ca9781c
[ODBC][12117][SQLGetInfo.c][528]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLEndTran.c][488]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLDisconnect.c][204]
Entry:
Connection = 0x14dbd4b0
[ODBC][12117][SQLDisconnect.c][341]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][268]
Entry:
Handle Type = 2
Input Handle = 0x14dbd4b0
[ODBC][12117][SQLFreeHandle.c][317]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][203]
Entry:
Handle Type = 1
Input Handle = 0x14dbb0c0
[oracle@aris_sv_db log]$

To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
- Klaus

[ODBC Driver Manager] Driver does not support this function

HI every body
In Win Server 2008 R2 , I tried to retrieve data from my ODBC Driver
by Report Builder , my connection test is successful , but after any retrieve data by SQL Statement I encounter with this Error :
IM0001: [Microsoft] [ODBC Driver Manager] Driver does not support this function
I use Win Server 2008 R2 , and my ODBC Driver installed on :
%SystemRoot%\SysWOW64\odbcad32.exe
Can anyone help me to solve this problem, its realy urgent for me ,
PLEASE HELP ………………..

ODBC Driver name is PMSDK (32 bit) and installed by Primavera software
I use SQL Report Builder to connect the driver and try SQL Statement in it
Report Builder may be executing an ODBC function to retrieve meta data, and that function is not supported by the PMSDK driver. Are you using the latest version of the PMSDK driver? You might try turning on ODBC tracing to find out the problem
function.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Error: Driver does not support this function

Hi there people!
I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
<%@ page import = "java.sql.*" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<HTML>
<title>Stock Portfolio</title>
<body>
<body bgcolor="gray"><center>
<table border = 1>
<tr>
     <td><th>Symbol</td></th>
     <td><th>Type of Transaction</td></th>
     <td><th>Date</td></th>
     <td><th>Shares</td></th>
     <td><th>Price</td></th>
     <td><th>Stock Commission</td></th>
     <td><th>Stock Brocker Name</td></th>
<tr>
<%     String symbol = request.getParameter("symbol");
       String type = request.getParameter("type");
       String date = request.getParameter("date");
        String shares = request.getParameter("shares");
        int ishares = Integer.parseInt(shares);
        String price = request.getParameter("price");
        float fprice = Float.parseFloat(price);
        String commission = request.getParameter("commission");
        float fcommission = Float.parseFloat(commission);
        String bname = request.getParameter("bname");
%>
<% String url ="jdbc:odbc:Product";
   try
   { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection con = DriverManager.getConnection(url,"","");
     String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
      PreparedStatement pstmt = con.prepareStatement(query);
      pstmt.setString(1,symbol);
       pstmt.setString(2,type);
       pstmt.setString(3,date);
       pstmt.setInt(4,ishares);
       pstmt.setDouble(5,fprice);
       pstmt.setDouble(6,fcommission);
       pstmt.setString(7,bname);
       pstmt.executeUpdate(query);
      }catch (Exception e)
       {System.out.println(e.getMessage());
%>
</body>
</html>      Thanks!

Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
[http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
Read reply #5.
It says
You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck.

Error -11040 Driver does not support this function- Informix SE db

Hello,
Weu2019re getting an error -11040 "Driver does not support this function" when trying to connect to an ODBC data source to an InformixSE database. This is with Crystal 2010 and 2008 on a Windows XP sp2 box. Weu2019re trying to use the ODBC(RDO) choice for a new connection.
The Informix ODBC driver has been loaded. We tried 3 versions, the 2.40 and 3.70(latest) ones from IBM, and one that I believe came with Crystal (CR xxxx). I tried turning on the ODBC trace file, but it didnu2019t write anything to the log. We are supplying the same log in credentials as with Excel.
   The Informix database we use is Informix SE (Standard Engine) v5.10 on separate machine running Unix (Aix) with the Informix-Net daemon running to handle odbc connectivity. We are able to connect from Excel to the Informix database.
I donu2019t know what ODBC function Crystal may be expecting from the driver that it doesnu2019t seem to support and how to tell Crystal to not need it.
Thanks,
Mike

Hi Mike,
According to the Platforms for DB support we only support these Informix data sources:
IDS (Informix Dynamic Server)     11.50       32 bit       64 bit        Linux               AIX                   Solaris
IDS          IDS Client 11.5                                     Direct     Direct     Not Supported     Not Supported     Not Supported
ODBC      IBM Informix ODBC SDK 3.50             Direct     Direct     Direct             Direct             Direct
ODBC      DataDirect ODBC 6.0 SP2 (10)      Direct     Direct     Direct             Direct             Direct
You may want to try the Data Direct 6.x drivers as a test.
CR in the .NET IDE is running under 32 bit mode so make sure you are using the 32 bit Client.
Don

Does Numbers support Excel functions CELL, SUBSTITUTE, and REDIRECT?

Been trying to find the list of Excel-compatible functions but did not succeed. I would like to use Numbers to edit my Excel files in iPad. I often generate reports by pulling data out from a seperate sheet using Excel functions like CELL, SUBSTITUTE, and REDIRECT. I have not purchased Numbers yet, that is why I would like to know where I find the complete list of Excel-compatible functions or at least know if Numbers support these functions. Thank you in advance.

Numbers does support the function substitute()
I did not see the functions cell() and redirect() in the function browser.
There is afree function reference here:
iWork '09 Formulas and Functions User Guide
which you can use

Does XI support PLSQL Functions?

Hi...
Generally we use Stored Procedure at the Receiver end with JDBC Adapter. I wanted to know if XI supports PLSQL Function?
If so, can anyone please tell me the structure to be used. Is it the same one as for Procedure??

Hi ,
Plse go througnthe following links
Here is an example of mapping for synch JDBC.
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Also go thru these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm
Assign points if you found helpful
Regards.,
V.Rangarajan

TS1416 It seems the latest itunes version does not support sync functions to ipod classic

I have updated my Itunes to version 11.04 but it seems this version does not support syncing with Ipod classic it seems it only supports the Ipod touch. Does anyone have any solutions for this problem?

Device not recognized. Take note of item 5.
http://support.apple.com/kb/ts1538

Correspondence management - Does CMS support dynamic functionality

Hi
We have an requirement that based on the xml input the no. of pages should get generated. This functionality we have implemented in CMSA, the pages are getting generated but the asset which we mapped to template are not displayed.
For example: My input XML consists of 4 address, In CMS, at layout design we wrote code for no. of address that many pages need to be generated on page level. The same layout we used for creating template.
While designing an template we used the fragments and assets. The pages which are generated dynamically shows fragment content but not the asset content.
i.e., Page 1 is displayed properly with all the content of the letter, but the pages generated dynamically have fragment but no asset.
Do CMS support this type of functionality?
If yes, please help me in resolving this.
Thanks in advance
Regards,
Sony

In Numbers '09 there is the function HYPERLINK() described as:
HYPERLINK
The HYPERLINK function creates a clickable link that opens a webpage or new email message.
HYPERLINK(url, link-text)
• url: A standard universal resource locator. url is a string value that should contain a properly formatted universal resource locator string.
• link-text: An optional value that specifies the text that appears as a clickable link in the cell. link-text is a string value. If omitted, url is used as the link-text.
Examples
=HYPERLINK(“http://www.apple.com”, “Apple”) creates a link with the text Apple that opens the default web browser to the Apple homepage.
=HYPERLINK(“mailto:[email protected]?subject=Quote Request”, “Get Quote”) creates a link with the text Get Quote that opens the default email application and addresses a new message to [email protected] with the subject line Quote Request.
It's what is the closest feature available.
Yvan KOENIG (from FRANCE samedi 18 juillet 2009 10:30:29)

Does JDev support the function of "mark occurrence" like eclipse

The function of "mark occurrence" is to highlight every occurrence of the word you selected in the same file.
If it does, will anyone kindly show how to do it in the preference.
Many thx and best regards.
wf

Two things to try out:
Ctrl+Alt+H or from the menu Search->Highlight
I would also recommend you download the "Varaiable Highlighter Extension" for JDeveloper through help->check for updates.

NiVision does not support delayload functionality

I'm writing a C++ application in VisualStudio 10 using NI Vision and NI IMAQ.
Depending on the configuration of the deployed application it may not need NI Vision at all.
In order to keep a user from requring NI-Vision on their system if the application does not use it I add the NI-Vision DLL to the Delayload inputs of the project.
This way a user can run without a message that the NI-Vision DLL is missing if they never require it.
The trouble is, as soon as the "nivision.h" is included, when the application shuts down, it appears to make a call to imaqCloseWindow which will cause an exception if nivision.dll is not present.
The exception happens in the generated code __delayLoadHelper2 while looking for imaqCloseWindow
This appears to be called from __tailMerge_nivision_dll()
I suspect this is an issue with this line in nivision.h #pragma comment(linker, "/INCLUDE:_nivision_startup_shutdown")
Is there anyway to get around this?
Thanks,
Amaury

Hi,
First I just want to point out that none of our vision software is made to be compatible with VisualStudio 2010. The latest version we support is VisualStudio 2008.
That being said, I do not see any way to get around this with out actually editing the DLL. As you said, anytime you include the nivision.h you are going to have the call to imaqCloseWindow present.
Regards,
Greg H.
Applications Engineer
National Instruments

ORA-02070: database PSQL_REPORT does not support some function in this cont

[oracle@stdb ~]$ sqlplus / as sysdba
SQL*Plus: Release *10.2.0.5.0* - Production on Tue Mar 20 13:15:35 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Session altered.
Elapsed: 00:00:00.00
13:23:36 SQL> desc "report_accident_detail"@PSQL_REPORT
Name                    Null? Type
id                    NOT NULL NUMBER(10)
accident_master_id          NOT NULL NUMBER(10)
subscriber_id               NOT NULL NUMBER(10)
unit_id               NOT NULL NUMBER(10)
event_number                    NUMBER(10)
reg_number                    VARCHAR2(254)
vin                         VARCHAR2(254)
servertime_begin               NUMBER(10)
servertime_end                NUMBER(10)
event_datetime                DATE
event_address                    VARCHAR2(254)
event_location                VARCHAR2(254)
latitude                    FLOAT(53)
longitude                    FLOAT(53)
area_id                    NUMBER(3)
area_kind                    NUMBER(1)
ignition_state                NUMBER(5)
accel_value_x                    FLOAT(53)
accel_value_y                    FLOAT(53)
accel_value_z                    FLOAT(53)
vehicle_speed                    FLOAT(53)
call_to_customer_datetime          DATE
is_customer_confirmed_accident      NUMBER(10)
note                         VARCHAR2(254)
gen_datetime                    DATE
1* select count(*) from "report_accident_detail"@PSQL_REPORT
13:21:33 SQL> /
COUNT(*)
150
1 row selected.
Elapsed: 00:00:00.01
1* select * from "report_accident_detail"@PSQL_REPORT
13:21:57 SQL> /
ERROR:
ORA-02068: following severe error from PSQL_REPORT
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.1.4)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=PSQL_REPORT)))
no rows selected
Elapsed: 00:00:00.09
initPSQL_REPORT.ora
HS_FDS_CONNECT_INFO = PSQL_REPORT
HS_FDS_TRACE_LEVEL = 255
HS_FDS_SHAREABLE_NAME = /usr/lib64/psqlodbc.so
HS_LANGUAGE = AMERICAN_AMERICA.CL8MSWIN1251
HS_FDS_SQLLEN_INTERPRETATION=32
set ODBCINI = /etc/odbc.ini
set ODBCINSTINI = /etc/odbcinst.ini
Oracle Database CHARACTER SET CL8MSWIN1251
Postgres Database
CREATE DATABASE "3st_reports"
WITH OWNER = sysdba
ENCODING = 'UTF8'
TABLESPACE = pg_default
LC_COLLATE = 'ru_RU.UTF-8'
LC_CTYPE = 'ru_RU.UTF-8'
CONNECTION LIMIT = -1;
Listener:
[oracle@stdb ~]$ cat /u01/app/oracle/product/11.2.0/Gateway_x64/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/Gateway_x64/network/admin/listener.ora
# Generated by Oracle configuration tools.
GATEWAY_X64 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.1.4)(PORT = 1522))
SID_LIST_GATEWAY_X64 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = PSQL)
(PROGRAM = dg4odbc)
(SID_NAME = PSQL)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/Gateway_x64)
     (ENVS=LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/Gateway_x64/lib)
(SID_DESC =
(GLOBAL_DBNAME = PSQL_REPORT)
(PROGRAM = dg4odbc)
(SID_NAME = PSQL_REPORT)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/Gateway_x64)
(ENVS=LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/Gateway_x64/lib)
#INBOUND_CONNECT_TIMEOUT_GATEWAY_X64 = 0
ADR_BASE_GATEWAY_X64 = /u01/app/oracle
strace shows me 'Segmentation fault':
2807 write(7, " SQLFetch: row: 1, column 22, bf"..., 51) = 51
2807 write(7, " SQLFetch: row: 1, column 22, bf"..., 63) = 63
2807 write(7, " SQLFetch: row: 1, column 23, bf"..., 50) = 50
2807 write(7, " SQLFetch: row: 1, column 23, bf"..., 62) = 62
2807 write(7, " SQLFetch: row: 1, column 24, bf"..., 53) = 53
2807 write(7, " SQLFetch: row: 1, column 24, bf"..., 82) = 82
2807 --- SIGSEGV (Segmentation fault) @ 0 (0) ---
2807 rt_sigprocmask(SIG_UNBLOCK, [SEGV], NULL, 8) = 0
2807 chdir("/u01/app/oracle/product/11.2.0/Gateway_x64/rdbms/log") = 0
2807 mkdir("hs_core_2807", 0750) = 0
2807 chdir("hs_core_2807") = 0
2807 open("/u01/app/oracle/product/11.2.0/Gateway_x64/rdbms/log/hs_core_2807/hs_core_trace_2807.trc", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 10
2807 fstat(10, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
2807 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaab616000
PSQL_REPORT_agt_2903.trc
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- TUESDAY MAR 20 2012 13:13:17.733
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
HOSGIP returned value of "UCS2" for HS_NLS_NCHAR
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
HOSGIP returned value of "32" for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "PSQL_REPORT"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:PSQL_REPORT
SQLFetch: row: 1, column 20, bflsz: 8, bflar: 8, (bfl: 8, mbl: 8)
0: C1CAA145 B6F3ED3F [...E...?]
SQLFetch: row: 1, column 21, bflsz: 8, bflar: 8
SQLFetch: row: 1, column 21, bflsz: 8, bflar: 8, (bfl: 8, mbl: 8)
0: 00000000 00005440 [......T@]
SQLFetch: row: 1, column 22, bflsz: 16, bflar: -1
SQLFetch: row: 1, column 22, bflsz: 16, bflar: SQL_NULL_DATA
SQLFetch: row: 1, column 23, bflsz: 4, bflar: -1
SQLFetch: row: 1, column 23, bflsz: 4, bflar: SQL_NULL_DATA
SQLFetch: row: 1, column 24, bflsz: 65537, bflar: 0
SQLFetch: row: 1, column 24, bflsz: 65537, bflar: 0, (bfl: 65536, mbl: 1000000)
[root@stdb ~]# cat */etc/odbc.ini*
[ODBC Data Sources]
PSQL_REPORT = PostgreSQL
[PSQL_REPORT]
Driver = PostgreSQL
Description = PostgreSQL_DSN
DSN = PSQL
Servername = 172.16.1.6
Username = sysdba
Password = ***
Database = 3st_reports
ReadOnly = No
Servertype = postgres
Port = 5432
#FetchBufferSize = 1000
#EnableQuotedIdentifiers = 1
#TDS_Version = 8.0
Trace=Yes
TraceFile=/tmp/odbc.log
[root@stdb ~]# cat */etc/odbcinst.ini *
[ODBC]
Trace=Yes
TraceFile=/tmp/odbc.log
# Included in the unixODBC package
[PostgreSQL]
Description     = ODBC for PostgreSQL
Driver          = /usr/lib64/psqlodbcw.so
Setup          = /usr/lib64/psqlodbcw.so
FileUsage     = 1
Debug = 1
Edited by: 922067 on 20-Mar-2012 03:21

Thank you for the answer.
The table definition in postgres db:
CREATE TABLE report_accident_detail
id serial NOT NULL,
accident_master_id integer NOT NULL,
subscriber_id integer NOT NULL,
unit_id integer NOT NULL,
event_number integer,
reg_number character varying(15),
vin character varying(30),
servertime_begin numeric(10,0),
servertime_end numeric(10,0),
event_datetime timestamp without time zone,
event_address character varying(250),
event_location character varying(23),
latitude double precision,
longitude double precision,
area_id numeric(3,0),
area_kind numeric(1,0),
ignition_state smallint,
accel_value_x double precision,
accel_value_y double precision,
accel_value_z double precision,
vehicle_speed double precision,
call_to_customer_datetime timestamp without time zone,
is_customer_confirmed_accident integer,
note character varying(4000),
gen_datetime timestamp without time zone DEFAULT transaction_timestamp(),
CONSTRAINT pk_accident_detail PRIMARY KEY (id ),
CONSTRAINT fk_accident_detail_1 FOREIGN KEY (accident_master_id)
REFERENCES report_accident_master (id) MATCH SIMPLE
ON UPDATE RESTRICT ON DELETE RESTRICT DEFERRABLE INITIALLY DEFERRED
WITH (
OIDS=FALSE
ALTER TABLE report_accident_detail OWNER TO sysdba;

Does OIM support this functionality?

Hi all,
1) in OIM can xelsysadm user see all the approvals.
ex: when a user raises a request and its pending with his supervisor. Can xelsysadm see this approval task at his end and re-assign the task to some one else or approve the request by himself.
2) what tasks will be under open taks? i just dont understand what tasks comes under Open tasks and why is it for
Thank you,
Doki

Well xelsysadm can see all the requests but cannot approve them. It can just Track those requests.
1) xelsysadm can see but not approve or re-assign.
2) Any provisioning task when assigned to a user is visible under this link. Say you want to have manual provisioning and you justneed approval to happen through OIM then you just complete the approval and assign a provisioning task like Create User task to any user. So it comes under open tasks.
Thanks
Sunny

Does labview support dll which has sub functions that are static functions?

Dear all,
I wrote and compiled a C function into dll to be called by labview. The function calls a sub function. It works fine if it is a normal sub function. However I see that if I declare the sub function to be static, labview will crash. So is it that labview does not support static function in dll?
Best,
Miao

A static function simply means that it is local to the C module that defines it and can't be seen from other C modules in a library. It should not change anything else about how it works.
So in conclusion it should not make a difference in if it crashes or not but only create possible problems in linking the library. It seems extremely likely that you have another problem in your library that gets somehow triggered more easily when you compile your code with the static functions, but it should not have to do anything directly with the fact that you have static functions in itself.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Does Charm supports the stms function "Adjust queue"

Hi Gurus.
Our SOLMAN Prod is on version 7.0 SP 25 and I'm trying to activate new system to use the CHARM for transports.
In the new satellite system, the "Adjust queue" function in STMS was used.
Does CHARM supports this function?
Any suggestions will be greatly appreciated.
Thanks,
Tess

Hi,
Yes, ChaRM support this functionality.
If you have configured transport routes between systems in different transport groups, the requests to which the transport files are to be transferred are displayed in the import queue of the target system.
Before you can import these requests, you have to transfer the data files and co-files belonging to the requests by Adjusting the Import Queue.
See also: http://help.sap.com/saphelp_smehp1/helpdata/en/06/ea457a12a711d3b46f006094b9ea64/content.htm
This is the only information i have. I hope that helps.
Thanks
Regards,
Vikram

Does CISCO3745 support PE function?

Similar Messages

Maybe you are looking for