Does last delivery flag on PO increases the available budget

HI Gurus ,
Suppose  a Purchase Order is created (with account assignment P - assigned to WBS element) for 100 qty (price 1 EUR each) and GR and invoice is done for 50 EURO.
Now if I put the last delivery as well as final invoice flag in the PO , is that  enough increase the available budget in the wbs element ? Or do i need to decrease the quantity in the PO ?

Hi dear,
If account assignement is P in PO.Setting the flag or reducing the quantity in PO will not increase the budget of WBS element.If you want to increase the budget u have to traansfer it by CJ34/CJ36.
So this is not possible.
Edited by: Deepak Kulkarni on Mar 17, 2011 9:33 AM

Similar Messages

  • My Ipod nano automatically reduces the volume and does not hold my attempts to  increase the volume.  Help!

    My Ipod nana automatically reduces the volume and does not hold my attempts to increase the sound. Help.

    There is a Volume Limit setting on the iPod.  From the main screen
    Settings -> Playback -> Volume Limit
    You can check that setting to see if it set too low.

  • How to avoid that the last column in a datagrid increase the width out of the window?

    I have a datagrid with this configuraction:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}"/>
    </DataGrid.Columns>
    The last column is a description, so the text can be a bit large. so I would like that the width don't be wnough greater than makes the datagrid has a width out side the window.
    For this, I have read that I can use Width="Auto" in all the columns and in the last column width="*", but in this case all the coloumns has a very low width so I can't read anything.
    The code that I have used in this case is:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width=""Auto"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width=""Auto"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
    </DataGrid.Columns>
    I am using visual studio community edition and wpf 4.5.1.
    Thank so much,

    >>For this, I have read that I can use Width="Auto" in all the columns and in the last column width="*", but in this case all the coloumns has a very low width so I can't read anything.
    Can't you just set an explicit width for the first two columns then?, e.g.:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width="100"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width="100"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
    </DataGrid.Columns>
    There is also a MinWidth property that you can use to prevent the columns from being to narrow:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width="Auto" MinWidth="100"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width="Auto" MinWidth="100"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
    </DataGrid.Columns>
    Hope that helps.
    Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

  • Does upgrading to a larger harddrive increases the speed of your computer?

    Hi,
    I was wondering if increasing the size of your harddrive is going to speed up your computer?
    Thanks,
    Brandon

    Tough question that depends on several factors. First is how full was your old drive, the closer it comes to capacity the slower that makes your computer. As a general rule of thumb OS X should have a minimum of 10% free disk space to operate OK. Next is the RPM speed of the drive drives, you can buy hard disks that spin at 5,400, 7,200 & 10,000 RPM, the faster the RPM the quicker the input/output. Theoretically if you replace a 7,200 RPM drive with a 10,000 RPM drive that will speed up the input / output.
    So if you are replacing a drive that is currently filled to 70% capacity that spins at 7,200 RPM with a larger capacity 7,200 RPM drive then no you probably won't notice any difference in performance. However if you are replacing a drive that is at 90% capacity that spins at 7,200 RPM with a higher capacity 10,000 RPM drive then yes you will probably see some performance increase.
    Bottom line, not simple question to answer.
    Regards,
    Roger

  • Confirmations table / Last Delivery field?

    Hi,
    BBPCRM release 400 Level 10
    I am trying to find the table that holds the Confirmations information, specifically the ‘Last Delivery’ CheckBox field.
    Background:  I have a PO which is still showing up as needing receipting for the user, and I think the reason this is happening is there are 2 confirmation lines on the PO. 
    The first confirmation was cancelled and the Last Delivery was not ticked. 
    The second Confirmation was completed and it was flagged as Last Delivery.
    But I think the Last Delivery un-ticked on the cancelled line is causing it to stay on the users screen.
    I am trying to remove the PO from the users screen when looking at PO’s that need receipting.
    Thanks in advance for your time and input.
    Thanks,
    Neal.

    Thanks for your answer!  You where spot on, I managed to change the Last Delivery Flag.
    My assumption was wrong about the Last Delivery flag.  So I will have to look into the status in the Jest table.
    Cheers,
    Neal.

  • Trying to increase the sound of recorded screen captures

    Hi. I'm making screen capture movies with Snapz PRo 2 and they are being saved as QT movies on my desktop. When I open them in QT and try to increase the sound volume, the setting don't stick if I try to raise the volume over 0db. I read somewhere that QT won't let you save volume over 0db, is that true?
    If so, does anyone know how I can increase the gain on the movies without having to load them into Final Cut or iMovie? Is there some program that will let me just edit the sound of a QT movie?
    Thanks in advance.
    Antonio

    Hey, thanks for the tips. But... I don't think I'm making myself clear here.
    I don't want to spend ANY time in post with these tutorial screencasts that I'm making. If I did, I'd just whip out my Sennheiser and my mixer and take the whole shebang into FCP and cut it and sweeten audio there.
    What I'm doing is using Snapz to capture screen actions that I'm recording as tutorials for my students. I'm using either a Blue Snowball USB mic or my Logitech 250 USB headset with mic to record my voice as I demo apps on the Mac. Snapz is using the Apple animation codec to make the movies. But, what Snapz is not doing and cannot do is help me boost the audio a bit. If it did, then I'd have a finished movie right there. As it is, I have to wait a long time for Snapz to finalize the flick. What I don't want to do is load the film up in FCP (takes time) and then export it (also takes time) and be done. I want to package these things up fast. All I need to do is boost the audio a little and everything would be great. If Quicktime Pro allowed me to do that, that would be great because it would not have to re-encode the movie again.
    Maybe there is no way to do what I'm asking without doing it in FCP. If that's the case then that's what I'll do.
    THe whole point of this is that I want to keep it as simple and as past as possible because I am not making any money doing this (but I am teaching for money). I offer it to my students as a value added addition to their classes.
    Thanks,
    Antonio

  • Calendar - Increase the number of technicians in calendar view.

    I'm using the SAP Business ONE standard calendar to control my mobile engineers via 'service calls' and 'activities'
    Does any one know how to increase the number of technicians a user can see in the calendar view at any one time, even if they were grouped?
    We have over 50 engineers and at the moment we can only see a maximum of 7 in the group view. If we wish to see more we have to use form settings/user tab to deselect and reselect more technicians
    It would aid this if the list of technicians were in the vertical axis instead of the horizontal one (this would leave more room for more engineers!
    There is also added functionality I could suggest but non of it would be of any use unless we could see more engineers

    Hello.
    It's a great idea - at our current project client also wants such functionality of calendar (technicans are in vertical axis instead of horizontal axis).
    In case of lot of technicans it's more convenient way to see their busy schedule.

  • How can I increase the tempo of a song without distorting the vocals?

    I have a song I recorded, with the vocals and backing track on seperate tracks.
    The song has been recorded a bit too slow, and I need to increase the tempo. However, when I do this, the vocals become distorted and have a wavy sound.
    Is there any way I can increase the tempo of the song without distoring the vocals? I've tried doing it on the final song (merged tracks) and on the vocals alone, but nothing seems to work. It doesn't make sense, since when you do the same thing to a song by a professional artist, you can increase the tempo of the song without distoring the vocals.
    What am I doing wrong? How can I increase the tempo of my song without distoring the vocals?
    Any help would be greatly appreciated.

    in general GB doesn't do such a great job with changing tempo of audio recordings, what you might find works better is to export your song uncompressed and then use an audio editor:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I increase the font size for safari?

    Does anyone know how I can increase the overall font size when in Safari?  I recently purchased a 21.5" iMac and while the screen is brilliant, the font size is very small when I'm using Safari.  Also, the web page is about a 1/3rd of the size of the screen.  Would anyone know how to make it such that a web page is across the full screen?  Otherwise, what's the point of such a big screen?
    Thanks!!

    To get full screen view, look down at right hand corner of page.
    You will see hash marks at a 45 degree angle in the corner.
    Set pointer on it, and grab out to full edge of screen.
    This works for all Apps including images.
    I do this as default, being I sit about 5-6 feet from the screen.
    Then use Pinch- Out to expand the page within the Browser.
    Pinch-Out works for all Images loaded on the screen as well.
    *You may know this already, grab browser window at the top edge,
    and move it near the left edge of screen first.
    I'll throw in a handy viewing tip of items saved on the desk top,
    or within the Finder so that you don't actually have to launch the item.
    Simply highlite it, then hit Space Bar.
    This is part of Quick View,,, The Eye Ball Icon in header of viewing Finder does the same thing.
    This works for all video files as well for a Quick View, w/o running huge ram loads.
    Hit Space again to turn it off , Quick View.
    You can leave it on if browsing stack of files, then arrow down or up for those views.
    Cheers

  • My ipad shows capacity 13.6GB, available 0 bytes. Can I clear some items from the memory to increase the avaavailable memory?

    my ipad shows capacity 13.6 GB, available 0 bytes. Can I clear some items from the memory to increase the available memory?
    Getting message "storage almost full"

    One usually large user of storage space is photos and videos. You could import them to a computer and then delete them from the iPad: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
    You can also go to Settings > General > Usage and click on "Manage Storage" (in the Storage section, not the iCloud section) and that will show what is using the storage and may help you decide if you want to delete some apps or something else.

  • Exchange rate diff. influencing the available cost of WBS-element

    Hi all,
    here is a intricate problem I need help to solve. I am not so very experienced withon CO/PS, my main competence is within PM. This issue involves PM/MM/PS and CO so I am not sure if this is the correct group to post to, but I give it a try..
    In PM (Plant Maintenance) workorders the u201DPlanned Costu201D is calculated.  Exchange rate type for the u201DPlanned costu201D is picked from the CO Cost Version u201D0u201D that uses exchange rate type u201DPu201D. This is a exchange rate type that have one yearly fixed exchange rate. The actual costs are posted with exchange rate type M, which is daily updated.
    The Planned cost in the workorder is a part of the u201DAssigned Costu201D that are influencing the available budget on the WBS-element. u201DRemaining/Residual order planu201D.
    In cases where the PRQ/PO are created in other currency than the Company code currency we have a problem:
    The difference in exchange rate are causing the u201DAvailable budgetu201D to be too low u2013 and the only workaround I have found is to decrease the planned cost in the WO to release the available cost for the Budget. (make the available cost higher )
    Does anyone have an idea how to solve this?
    - I have thought of setting the exchange rate type for the planned cost to be the same as for the actual costs u2013 but it is not recommended to change the exchange rate type in CO for cost version u201D0u201D and not a good ide to change the exchange rate type for actual cost eather. This will also not solve the problem of exchange rate difference caused by PRQ/PO beeing created for a whole year for varying exchange rates.
    - Is there a way to exclude the u201D Remaining/Residual order planu201D from the u201DAssigned Costu201D? And what consequences will this have? Only cost from PRQ/PO will appear? (Since internal material (reservations) and internal hours not triggers a PRQ/PO)? I see there is a transaction CJE5 where you can exclude the u201D Remaining/Residual order planu201D from the u201DAssigned costu201D u2013 but I think this will only exclude it from beeing shown in the report S_ALR_87013558?- not from the calculation of available cost at the WBS-element?  which is what I need. (see Note 668240)
    -Is there any u201DExchange rate differenceu201D setting in the customizing u2013 how exchange rate difference are treated for PM orders? And will this help my problem?
    Best regards
    Ellen

    Hi ,
    try this way...
    Go to T-code>CJE0>Enter CO Area-->and execute the report 12KST1A  ->in the selection screen -->
    go to menu -->system -->status check the program name and ...copy
    next go to se38 and copy yhe above program name and execute and use submit report with selections,,,,
    Prabhudsa

  • Partial Delivery when the complete delivery flag is checked in Sales Order

    We do the ATP check in APO when we create a sales order in R/3. We have "complete delivery" flag checked in Sales Order. But when we create batch orders say may be of 20, one of 20 is confirming with partial delivery.
    We thought the issue is with ATP locking and we increased the re-attempts, but invain. We still have this partial confirming problem.
    Appreciate your co-operation.
    Thanks,
    Sarath.

    Have you maintained the following setings in R3:
    Material Blocks in R3:
    MenuPath: SAP Customizing Implementation Guide ® Sales and Distribution ® Basic Functions ® Availability Check and Transfer of Requirements ® Availability Check ® Availability Check with ATP Logic or Against Planning ® Define Material Block For Other Users
    Global Settings in APO for Availability Check:
    MenuPath: SPRO>APO>GATP>General Settings>Maintain Global Settings for Product Availabilty 
    Questions for you:
    (1)R3--Does the Availability CHecking Group you are using for your material and the initiator-A has the block checked.
    (2)APO-- Has the TQA box checked in the global settings for Availability in APO
    (3)Also what happens when AVAILABILITY CHECK is done manually for one of the partial confirmed order with Complete Delivery indicator set.
    Regards
    Kumar Ayyagari
    null

  • Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

    Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4?

    Question
    In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Is there a way to increase the icon size (and the text below) without using zoom?  I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

    Is there a way to increase the icon size (and the text below) without using zoom in iOS 7?  I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

    Hello Apple.
    It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed?  (It's not with the Mac.). And for so long too.
    Do you employ people with actual accessibility problems to help you do UI design?
    I think too, that some buttons are too close for people who might have motor control problems.
    I love my iPad but I fear as I age, the iPad might not keep up with me.

Maybe you are looking for