Does MGCP have a maximum delay requirement

Hi All,
In a senario where the call manager and gateway (mgcp) are connected over the WAN. Is the a maximum round trip delay for the MGCP router?
Thanks

Hi
MGCP will work over high delay paths and calls will be connected etc. What you need to consider however is the "Media Cut Through Delay" While a device is ringing, media is generally not flowing (RTP Packets)until the connected or off hook state. At which point the media is setup. This delay between off hook and RTP packets actually starting to flow causes clipping of the first word(s) of the call. This is generally a concern with call center agents.
If you start getting above 150ms one way delay, you should consider this.
Regards
Ronak patel
Rate helpful posts by clicking stars below the answer.

Similar Messages

Does RH11 have a maximum limit on the amount of index words added to a topic?

I have received a request to add over 50 index words to a topic. I don't find it resonable but it is a client request. RH11 WebHelp

Hi there
To my knowledge there is no limit. Actually, index words are a good thing. They allow users to find topics more easily!
Cheers... Rick

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have

After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have an idea of what the problem is? It has always worked in the past.

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required ext

[ Problem ]
I’m running the sample encryption code and I’m running in to this exception:
"com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required extended key usage". I tried looking it up on javadocs but it doesn’t really tell me what’s causing it. I get this error when encryptContent is called. Is this something in my settings/environment or something with the certificates?
[ Solution ]
If you are using the EncryptContent.java sample code, please check which credential you are using for the "packagerCredentialFile" variable. Make sure this is pointing at the .pfx file containing the packager credential.

[ Problem ]
I’m running the sample encryption code and I’m running in to this exception:
"com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required extended key usage". I tried looking it up on javadocs but it doesn’t really tell me what’s causing it. I get this error when encryptContent is called. Is this something in my settings/environment or something with the certificates?
[ Solution ]
If you are using the EncryptContent.java sample code, please check which credential you are using for the "packagerCredentialFile" variable. Make sure this is pointing at the .pfx file containing the packager credential.

HT3775 hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

In order to help, more information is needed.
What type of document is it (word document, picture or?) And do you know what software it was created with and what file format it is?

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

Ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been

I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
The problem is I can not launch(IE)  Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient     permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Starting IE as administrator starts the Report Manager with out problems.
Does anyone have suggestion, is more information needed? Thanks, Joe
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() ends

Hi Joseph_SQL,
The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
2008 and Windows Vista.
Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
we can refer to the following configuration steps:
Add Reporting Services URLs to trusted sites.
Report Manager Folder Settings
Report Manager Site Settings
For more details about how to configure the settings, please refer to the following article:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
Run as administrator.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

VMM Shared ISO error "User account does not have permission required to open attachment"

I had this error once because the local service account was selected during installation of VMM. I have reinstalled VMM with a Domain service account and the error went away. However, the error is back.
"User account does not have permission required to open attachment '\\[servername]\VMMLibrary\server.ISO'. Error: 'General access denied error' (0x80070005). (Virtual machine ID GUID)"
I tried to create this VM on Host1 and got the error.
I then went to Host2 and was able to create the VM while using the same ISO on the same VMM library that failed on the Host1.
Both hosts have agent 3.2.7634.0 and are both running Hyper-V Server 2012 R2.
What is wrong with Host1 and how do I correct it?
Thank you.

This is a share configuration permissions issue.
http://technet.microsoft.com/en-us/library/ee340124.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Does EchoSign have a solution for forms that require more than 1 signature?

We have a form that requires the employee to sign and the supervisor. The employee and the supervisor are often at 2 different locations. We want to use formscentral for the form. We would like the form to go to the supervisor for their signature before it comes to our department. Does echosign have a solution for form and signature process flow?

If you are sending a document to be signed by multiple signers you will want to define the Role for the various fields. The Role is who is allowed to interact with that field. By default the signers will sign in the order that their email addresses were entered into the To: field. It is important to keep this workflow in mind when setting up the signature fields.
When a signature field is placed you can set the Role for that field (who can click to sign). Right click on the signature field for the 1st signer and select edit. This will open a window where you can define the options for that field. Select the 1st signers email address in the drop down list for the Role: field.
Repeat this step to associate all the other signature fields for the other signers.
Please watch this short tutorial video to see how to author a multi-signer document:
https://www.echosign.adobe.com/en/misc/echosign-how-to-series-sending-to-multiple-signers. html

Does ADF pivot table in JDeveloper 11.1.1.2.0 have a maximum number of rows

Does ADF pivot table in JDeveloper 11.1.1.2.0 have a maximum number of rows that can be fetched from the database?

mmurmeli,
Seems then that you've identified how to allow more rows (increase the heap space) ;)
Hard physical limits aside, there is a practical limit to how much information a single human mind can absorb.
John

Does Apple have an alternative for adobe flash player I have websites that require it for viewing and they tell me Apple restricts Adobe.

Does Apple have an alternative for adobe flash player I have websites that require it for viewing and they tell me Apple restricts Adobe.

Hi Ron. Timely question! Try "Hype"
http://tumultco.com/hype/
Hype was just released and can be purchased at the Apple App store. I just got an iphone and resized all my websites will have to be revised. Read about it ...
http://mobile.informationweek.com/10996/show/4713846be58e278050d7a7921c8f68eb/
http://m.minyanville.com/?guid=3948&catid=5
Or go directly to http://tumultco.com/hype/ for tons of info.

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz

Solaris: The System does not have the required swap space

I'm trying to install Oracle onto Solaris 9. The installation check fails with the error
The System does not have the required swap space.
I've read the install Guide I get the following when I do the memory checks
bash-2.05# /usr/sbin/prtconf | grep "Memory size"
Memory size: 1024 Megabytes
bash-2.05# /usr/sbin/swap -s
total: 767688k bytes allocated + 117080k reserved = 884768k used, 379040k available
The install guide doesn't say how to increase the Swap Space. I would like to increase the Swap Space just for the duration of the installation. From the install guide I'll need a Swap Space of 1.5 times the Ram on the machine so I'll need 1.5GB Swap Space. Can someone help me out with the required syntax to increase the Swap File Size?

Found something on the web that did the trick. Create a few files and then add to your swap.. In case it's of interest to anyone else here's what I had to do
swap -l (lists files in swap)
mkdir /tmp/swap/ (create dir for file to add to swap)
mkfile tmp/swap/swap11 (create file for swap)
swap -a tmp/swap/swap11 (add file to swap)
swap -l (check files in swap)

I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flas

I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flashplayer.xpt:5) could not be written due to insufficient permission.

Perform a clean install as described in https://forums.adobe.com/thread/928315

Does MGCP have a maximum delay requirement

Similar Messages

Maybe you are looking for