Does 'Network Connect' work with MacBook Pro?

My safari unexpectedly quits when attempting to log into my company's VPN.
- I log into our VPN website and the connection begins to initialize
- with my MacBook, Safari (2.0.3) unexpectedly quits
- with my PowerBook, 'Network Connect' automatically starts and the VPN connection completes without any problem
Does 'Network Connect' work with MacBook Pro? Any ideas?

Resolved. MacBook Pro was having trouble dowloading the 'Network Connect' application when I logged into my VPN client for the first time. I copied it from my PowerBook G4 over to the appropriate folder and it now works perfectly.

Similar Messages

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • MacBook Air Superdrive?? Does it work with MacBook Pro

    Hello,
    I need an external Superdrive. Does the MacBook Air Superdrive work with MacBook Pro??

    No, it does not (at least, not without opening the drive and modifying the internal components).
    External optical drives from Sony and LaCie work well with the MBP. Here's ONE EXAMPLE, here's ANOTHER EXAMPLE, both from Amazon.

  • Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

    Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
    Thanks!

    It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

  • Does a dell c2660dn printer work with macbook pro?

    does a dell c2660dn printer work with macbook pro?

    According to their site, they offer no drivers for Mac, or mention anything about Apple.
    I would say no.

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

    I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8.  I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it.  Thanks for your help.

    Thanks so much for your help, Michael. Glad to hear it works for you.  This gives me enough confidence to go ahead and order the App.  Thanks again. 

  • Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    Ahmed
    Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
    Pattie

  • Does a Dell monitor that is compatible with PC work with MacBook Pro?

    Looking for a reasonably priced (under $200) external monitor to use with MacBook Pro. Any suggestions?

    Hello bkford
    I use an HP monitor with mine, Just by an adapter, I bought a VGA to mini display, and it worked fine!
    Good luck
    Dustin

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • Samsung Omnia Mobile Phone does not connect to my MacBook Pro

    Hi guys. I am after some advice please.
    My Mac Book Pro is currently not allowing me to browse my Samsung Omnia phone by bluetooth.
    It has worked previously however, it is not now. It recognises that the phone is there but when it comes to connecting it says "The connection failed or closed" - Would you like to attempt to reconnect or close this window?
    I do not know how to get this to work and I cannot use the USB transfer wire as it is not compatible with Apple Macs.
    I have some photos and files I would like to transfer over however, I cannot do so.
    Any help much appreciated please.

    Hi Elizaanne,
    I understand you are having issues with HP Officejet 6700 Premium not connect to your  Macbook Pro.
    Sometimes the router needs to be cycled.  I would unplug the router, turn off printer, turn off computer.
    Turn back on router wait 5 min and turn on printer and computer.
    Check on the printer if Wifi is SOLID.
    From System Preferences, open Print and Fax or Print and Scan pane. If you see the printer listed
    Click remove printer-  button. It will ask for confirmation of delete printer.
    Click the Add or + button, select the printer Bonjour Multifunction not Fax. Adding that should update the drivers.
    If the Printer Wifi is not solid you will have to set it up again.
    Press the Power button to turn on the printer.
    Touch the Right Arrow to display the second navigation screen.
    Touch Setup , and then touch Network .
    Touch Wireless Setup Wizard
    Then add it to you Mac 10.7. 
    I hope this helps.
    Please feel free to contact me if you require further assistance.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Msft ent desktop 7000 works with Macbook Pro 10.5.8 but not mini 10.6.1

    I just purchased a Mac Mini with 10.6.1. I'm using it as an entertainment system hooked up to my 60 inch plasma. I bought a Microsoft Bluetooth Entertainment Desktop 7000 keyboard and mouse. i like the keyboard and it all works except for the integrated trackpad. At first i thought it was because it wasn't fully Mac compatible but when I tried it on my Macbook Pro 10.5.8 the trackpad worked fine.
    Any suggestions??

    Hi,
    This is a guess: The MacBook Pro has a built-in trackpad, while the Mac Mini doesn't. Maybe it's missing a driver. When you have it connected to your MacBook Pro, try to look at your "Trackpad" system preference. Does that exist on your Mini? Also, try comparing the System Profiler outputs, especially concerning your USB.
    It makes it a little more challenging when your systems aren't both the same OS level :-D, so some things will be different between the two systems just due to the OS levels.
    David

  • Connection issues with MacBook Pro and DVI to component video

    How do I connect a 2007 macbook pro to a regular tv (non-hd) via the DVI port with component cables? The image is always scrambled. The connections are fine, what do I need to do?

    Concerning this comment:
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
    I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
    You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

  • HT1619 does it work with macbook pro's?

    I have a macbook pro 13-inch brand new 2012, not the newest with retina display but the one right before that. I was wondering if my mac descktop infared remote would sync with it and if it does will the remoreworkwith imovie?

    No, it does not (at least, not without opening the drive and modifying the internal components).
    External optical drives from Sony and LaCie work well with the MBP. Here's ONE EXAMPLE, here's ANOTHER EXAMPLE, both from Amazon.

  • Does the Magic Mouse work with Macbook pros?

    I've read on a website that the Magic Mouse only works with the iMacs they ship with.
    So, no Macbooks?
    Can someone confirm this?

    I just got my magic mouse and it indeed does work with my 2.8ghz MBP.
    HOWEVER, none of the scrolling features seem to work. The mouse connected to my bluetooth without any problems, it left and right clicks fine but zero touch surface scrolling seems to work.
    Tried reconnecting, on/off, computer restart etc. and no love from the magic mouse whatsoever.
    I'm all ears for any solutions.

Maybe you are looking for