Does Seagate Crystal Report Be Integrated with Java Swing

Hello All
We are developing java programs for quiet some time now, But what we are trying to do now is can we do the things what VB can do , Thatis the reports from the Database Query can be formatted into Crystal reports
I use Forte For java Sun One Studio 4 For developing Swing Applicatioon
If Any of U can give me idea, ie a report not in HTML format But Crystal Report, PLease Le me know
Regds

Are you developing an Applet or a standalone application?
The way I'd handle this is to install the Crystal Reports web server and then call these reports from the web simply by specifying an appropriate URL.
By the way: the Crytsal reports server also handles report requests in Netscape with JAVA (IE with ActiveX)
so perhaps this is the right corner to look for answers
Regards

Similar Messages

Crystal Report Viewer integration with Sharepoint 2010

We had a requirement in our project to view crystal report off an hyper link embedded into sharepoint web part developed using ASP .NET. The report accepted few parameters from the sharepoint page and passed those on to the SQL server to retrive data and
display the data in the report. The challenge was to open the report in the web browser.
The first difficulty was to find the right control to use, the report viewer tool that comes with Visual Studio 2010 is not the right one to use to view Crystal reports, I realised this after spending half a day trying to figure out why wouldn't the report
load. I then downloaded the Crystal Report Viewer for VS 2010 Standard from http://www.businessobjects.com/jump/xi/crvs2010/us2_default.asp. After you install this, you get the crystal report viewer in your toolbar. All you have to do is drag and drop it on
to the web part and configure it to use your report. If any one needs help with this let me know I will show how to do that.
So far so good. The biggest challenge was to deploy this on to the production server which took better part of 3 days to figure out how its done. If you deploy the WSP file as it is expecting that the crystal DLLs would be embedded in it then be ready to
expect a rude shock because it isn't. Here are the steps -
1. Deploy the WSP to the sharepoint server
2. Install the crystal dlls used in the project (CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.ReportSource.dll, CrystalDecisions.Shared.dll, CrystalDecisions.Web.dll) into the GAC using GacUtil command
3. Add following entries to Web.Config file (C:\inetpub\wwwroot\wss\VirtualDirectories\80\web.congif)
    <SafeControl Assembly="CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.CrystalReports.Engine" TypeName="*" Safe="True" SafeAgainstScript="False"
/>
      <SafeControl Assembly="CrystalDecisions.ReportSource, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.ReportSource" TypeName="*" Safe="True" SafeAgainstScript="False" />
      <SafeControl Assembly="CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.Shared" TypeName="*" Safe="True" SafeAgainstScript="False" />
      <SafeControl Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.Web" TypeName="*" Safe="True" SafeAgainstScript="False" />
4. Install crystal redistributable package which can be downloaded from http://www.businessobjects.com/jump/xi/crvs2010/us2_default.asp (
SAP Crystal Reports runtime engine for .NET Framework 4 (64-bit))
5. Copy aspnet_client folder from C:\>inetpub\wwwroot and overwrite it on C:\>inetpub\wwwroot\wss\VirtualDirectories\80
And we are done. Fingers crossed it should all work.
Prasad Matkar MCP, MCTS

Hi Mahesh,
How are you loading the report in your webpart? This is what I have done. I have tried to explain what I am doing in the program comments. Hope this helps. Good luck.
                SPSite mySite = new SPSite(SPContext.Current.Site.Url.ToString());
                SPWeb thisSite = mySite.OpenWeb();
                // Writing to event log after every step in debug mode so that you get to know if there was a failure what step the failure occured after.
                EventLog.WriteEntry("Reports", "Inside PAge Load ", EventLogEntryType.Error);
                SPFolder folder = thisSite.GetFolder("Reports");
                if (folder.Exists)
                    // get collection of Crystal Reports rpt files in the document library
                    SPFileCollection files = folder.Files;
                    // open the rpt file and get the contents
                    SPFile srcfile = files[reportToLaunch];
                    byte[] content = srcfile.OpenBinary();
                    // make a temporary folder
                    DirectoryInfo dir2 = new DirectoryInfo("~/temp");
                    if (!dir2.Exists)
                        dir2.Create();
                    if (File.Exists("~/temp/temp.rpt"))
                        File.Delete("~/temp/temp.rpt");
                    // write the report definition to a temporary file
                    // EventLog.WriteEntry("Reports", "Before Creating temp report ", EventLogEntryType.Error);
                    //EventLog.WriteEntry("Reports", "Before Create ", EventLogEntryType.Error);
                    BinaryWriter bw =
                      new BinaryWriter(File.Open("~/temp/temp.rpt", FileMode.Create));
                    bw.Write(content);
                    bw.Close();
                  // EventLog.WriteEntry("Reports", "After Create ", EventLogEntryType.Error);
                    // set up the crystal report
                    ReportDocument reportDoc = new ReportDocument();
                    reportDoc.Load("~/temp/temp.rpt");
                    EventLog.WriteEntry("Reports", "after report load ", EventLogEntryType.Error);
                    ConnectionInfo connection = new ConnectionInfo();
                    connection.ServerName = "SQLServerName";
                    connection.DatabaseName = "SQLDatabase";
                    connection.UserID = "sqluser";
                    connection.Password = "sqlpassword";
                    TableLogOnInfo logon = new TableLogOnInfo();
                    logon.ConnectionInfo = connection;
                    reportDoc.SetParameterValue("@Parameter1", parameter1);
                    reportDoc.SetParameterValue("@Parameter2", parameter2);
                    EventLog.WriteEntry("Reports", "after assigning parameters ", EventLogEntryType.Error);
                   foreach (CrystalDecisions.CrystalReports.Engine.Table t in reportDoc.Database.Tables)
                        t.ApplyLogOnInfo(logon);
                    EventLog.WriteEntry("Reports", "after applying login info ", EventLogEntryType.Error);
                    // and the Crystal report Viewer
                    CrystalReportViewer1.ReportSource = reportDoc;
                    EventLog.WriteEntry("Reports", "Before delete ", EventLogEntryType.Error);
                    // clean up
                    File.Delete("~/temp/temp.rpt");
                    EventLog.WriteEntry("Reports", "after delete ", EventLogEntryType.Error);
Prasad Matkar MCP, MCTS

Crystal Report Server 2008 integration with java application

Hi All,
Any of you having complete document about Crystal Report Server 2008 integration with java application....like source code and what are all the jar files needed? Or tell me that the implementation is same as Crystal Report Server XI R2?
Thanks

Have you looked at the BusinessObjects Enterprise XI 3.x Java Developer Guide?
[http://www.sdn.sap.com/irj/boc/sdklibrary]
Sincerely,
Ted Ueda

Crystal Report 2008 included with SAP integration Kit

Hi
We want to know the crystal report 2008 come with SAP integration Kit

Take a look into the following document:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948
It might help.

Integrating segate crystal report 7.0 with coldfusion Mx 7

hi,
i am using coldfusion mx 7 to view seagate crystal report
7.0 on internet explorer 6.0 thru IIS 6. but, Ie is not showing the
report thru cfm file. i can browse the report directly. i am
thinking that coldfusion mx 7 is not supporting seagate crystal
report 7.0
please suggest me any solution ASAP.
Thanks.

No, Oracle 11g never existed 10 years ago. It may work but CR 7 is so old now I can't say what issues there may or may not be.
ODBC may be your best option to connect but if any issues all I can suggest is to upgrade.
Good luck
Don

Seagate Crystal Reports ActiveX Designer error '80043ac4'

Website slows down when users are running reports. Users start getting errors when running any crystal report. After sometime main page itself stops loading and only static html is visible. Following is one of the errors users see:
Seagate Crystal Reports ActiveX Designer error '80043ac4'
Invalid directory.
/opera_mort2/report/AlwaysRequiredSteps.asp, line 54
Other errors seen on reporting site at that time are
Active Server pages error 'ASP 0115'
Unexpected error
/opera_mort2/report/rpt_level.asp
A trappable error (C00000005) occurred in an external object. The script cannot continue running.
authentication and network errors.
Rebooting the Web Server temporarily fixes the issue however the error recurs again after a day or two. We are seeing this problem in both our PROD and DR server. There was no change done to either of these boxes recently.
Also at this pint IIS was crashing. Microsoft Support analyzed the crash dumps created from IIS and came up with the following:
"All the memory dumps captured showed the same DLL that was accessing corrupted memory. This same DLL would also be the one that had originally written to those addresses. The DLL was craxdrt.dll from Crystal Reports 8.0 ActiveX Designer, which was version 8.0.1.0 from 1/28/2000. This DLL should be updated to see if this issue has already been fixed. Other options are to recycle IIS more frequently and move to a new version of Crystal Reports."
Here is a detailed analysis from Microsoft Support:
The issue appears to be heap corruption. Normally these are difficult to troubleshoot, however, in this case every memory dump that I looked at had the same component involved.
start end module name
42b30000 4307f000 craxdrt (export symbols) craxdrt.dll
Loaded symbol image file: craxdrt.dll
Image path: C:\Program Files\Seagate Software\Report Designer Component\craxdrt.dll
Image name: craxdrt.dll
Timestamp: Fri Jan 28 15:16:46 2000 (3892235E)
CheckSum: 0055446A
ImageSize: 0054F000
File version: 8.0.0.371
Product version: 8.0.1.0
File flags: 22 (Mask 3F) Pre-release Special
File OS: 40004 NT Win32
File type: 2.0 Dll
File date: 00000000.00000000
Translations: 1009.04b0
CompanyName: Seagate Software, Inc.
ProductName: Crystal Reports 8.0 ActiveX Designer.
InternalName: CRAXDRT
OriginalFilename: CRAXDRT.DLL
ProductVersion: 8.0.1.0
FileVersion: 8.0.0.371
PrivateBuild: 8.0.0.371
SpecialBuild: 8.0.0.371
FileDescription: Crystal Reports ActiveX Designer Runtime Support
LegalCopyright: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
LegalTrademarks: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
Comments: Crystal Reports for Visual Basic
This component is from the year 2000 and needs to be updated. I searched our old cases and found several where old version of this component caused the same heap corruption.
Please help as this is a production issue. Please let me know if you need any more information.
thanks and regards
sudatta soman

Something must have changed. Were any patches or auto updates done to the OS?
CR 8.0 has been out of the support cycle for some time now.
As Microsoft suggested please log in and download the patches for CR 8.0 from:
https://www.sdn.sap.com/irj/sdn/businessobjects-support
If that does not resolve the issue the only option will be to schedule sn IIS restart each night.

VS2010 will support Seagate crystal report 6.0?

Hi All,
This is to inform you that we are currently using the VC++ 6.0 and Seagate Crystal Reports 6.0 in our application and we are successfully upgraded vc++ 6.0 to VS 2010.
but We tried Seagate Crystal report 6.0 to lastest version ,but rewrite application in our side , so we won't possible to rewrite application.
My question is, VS2010 will support Seagate crystal report 6.0?
Thanks & Regards,
Esha Abdullah M
Edited by: Esha Abdullah on Jun 27, 2011 8:41 PM

Hi Esha,
VS supports Managed Code now, using unmanaged C++ code may or may not work. As we've all told you, CR 6 is 12 years old now and it had no concept of Visual Studio 2010 or managed C+. It's still c+ so if you get it working then great, if not there is absolutely nothing we can do for you. There should be no reason it won't work as long as the C++ dependencies included with VS 2010 still supports 1997 VS 5/6 C++ runtime. If those dependencies are not available then Cr likely won't work.
For the last time, upgrade to CR for VS 2010 and move to CR Assemblies, you can still write and use CR in Managed C+, lots of people do, we don't have any samples for you though. Lot's of C# samples which is MS's replacement for unmanaged C+.
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Bottom line is we can't Confirm if it will work, you are mixing 1998 and 2011 technologies so there is absolutely no guarantee from SAP this will ever work and you will never get one from SAP. You are on your own....
There are so many reasons why it likely won't work to list, OS's, DB clients, Windows Dependencies, SECURITY, to name a few that even if it did work does your Company want to sell and support something that if your users have issues there is no way of ever getting it fixed?
Seriously, It's time to talk to your Product team and catch up with current technologies and Crystal Reports.
Don
Senior Support Engineer
AGS Primary Support
Global Support Center Canada
SAP Canada, Inc.

Crystal Report 9 connectivity with WebLogic 10.3.5

Hello,
Is the Crystal Report 9 certified with WebLogic 10.x? Currently WebLogic 8.x is in use. Trying to upgrade the WebLogic.
Thanks

What does this have to do with Database Connectivity?
An I doubt it, CR 9 is about 8 or 9 years old well before 10.3 was released. Check the Platforms PDF's for more info.
Don

Portal Integration with JAVA ?

Hello All,
I've been working in the Portal for the past 1 Year.
The work which I've done is :
1. Creation of BSP's in SAP
2. Create iViews in Portal accessing these BSP Applications.( BSP , IAC, URL,BW etc )
3. Create Roles.
Now I'm moved to one more Project which does the Portal Integration with JAVA.
Can any one tell me what is it and how it can be done ?
Regards,
Deepu.K

Hi Deepu
You can achieve the same,please visit the following links:-
http://help.sap.com/saphelp_nw04s/helpdata/en/d8/6ee03fc2269615e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d8/6ee03fc2269615e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/771fa290-0201-0010-3d93-865e66cc6d7e
Regards
Navneet
Please revert incase of doubt.

Seagate Crystal Reports: Database Error

I am using Crystal reports Version 8 and frequently get the error 'Seagate Crystal Reports: Database Error' when I try to open a previously working crystal report file. The error occurs when I click on the Database menu. Every time I get this error I end up redesigning the report as the I have not yet found a solution and I cant run the report.
The error is a message box with the title 'Seagate Crystal Reports: Database Error' and an ok button - nothing else.
Its very frustrating!
Please help.
Thanks.

Hi,
What database are you using and how are you connecting to it?
What are you clicking in the Database menu: Set Location, Verify Database, Show SQL Query?
Before opening the report, can you connect to the database first then open the report?
I would have expected an error code or a more descriptive error to follow.
Thanks,
Brian

Problem with crystal report that comes with VStudio 2008 Database edition

Hello,
I'm using crystal reports that comes with Visual Studio 2008 Database edition. But I'm having a problem these days. When there are more than 4 pages in the report, the summary field in the pagefooter(usually sum of data in the Details section) show 0 in the first page.It will be displaying in all other pages. I couldnt sort out the problem.I'm binding data to the report from an SQL Server 2005 table.
Thanks in advance.I really appreciate if some one can sort out the problem quickly.

Have not heard of the issue, but download SP1 and see if that helps:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Image not showing in Abobe integrated with Java WebDynPro

Hi All,
Image is not showing in Abobe integrated with Java WebDynPro.
I did the following:
Added the image field in adobe form. in URL value set the value of context node binding. Binding set to none and size set to Use Original Size.
Then in script editor i wrote
this.value.image.href = xfa.resolveNode(this.value.image.href).value;
at innitialize , javascript and client.
I can see the image from the same url context value if image field is created directly in WebDynPro View.
Can anyone suggest what is missing?
Thanks and Regards,
Nuzhat

Try changing your line of code for this one
this.value.image.href = xfa.record.Images.URL;
Check that the url passed by scripting is correct with a messageBox for example.
You can also try assigning a hardcoded url at scripting level to check if its works.
Best regards, Aldo.

How to get one crystal report to work with two different backends?

We have a software that can work with either SQL2008 or Visual Fox Pro backend. We are trying to compile One Crystal report that will work with either of the two backends. How to you make sure that your Crystal Report is compiled so that it will work with both backends?
Right now my reports were originally created using the SQL2008 backend and are retaining the DBO reference in the statement, which then will not allow the Crystal report to work with the VFP backend.

You can write your data sets as a command using hand coded SQL. As long as "dbo" is the only schema used in your SQL Server database, you don't need to specify it in the SQL. SQL Server will automatically assume the dbo.
The 2nd thing... The SQL needs to be 100% compatible with both SQL Server 2008 AND VFP. This will limit the list available functions to those that are common to both platforms AND work exactly the same in both platforms.
The other part is to make sure you are using an ODBC type connection instead of OLD/DB. That way all of the connection properties are set on the local machine and the report is simply looking for the System DSN name.
HTH,
Jason

Error from the seagate Crystal Reports ActiveX Designer

Hi guys,
I get the following message when I running a report application based on Web. The Message is as following:
The Error Message was Error detected by database DLL from Seagate Crystal Reports ActiveX Designer
Internet Explorer has encountered a problem wiht an add-on and needs to close.
the following add-on is running when this problem occured
Add-on Name: CRview.dll
Company Name: Crystal Decision, Inc
Description: Crystal Viewer for ActiveX
I think the crystal is old version , the IE is version 7
Thank you very much
Clara

OK, an upgrade of Oracle causes Crystal Reports to throw "Error detected by database DLL". It may very well be that version 8 report will not be able to run that version of Oracle. E.g.; version 8 of CR will not run Oracle 10 g for sure...
Something to look at; can you run the report in the CR 8 designer when connecting to that updated version of Oracle?
You'll have to locate the platforms.txt file for CR 8 and see what version of Oracle it supported. I do not have a link or even an idea of where that may be as CR 8 has been out of support for soooo long.
Ludek

Can we put additional Crystal report in menu with rights? Is it inbuilt ?

dear all
one of my clients want crystal reports in menu with user rights. is it possible. if yes how.
regards
sri

Hi Sri......
It is possible if you have SAP 8.8 and above version.
Once you designed Crystal Report and Import it to certain menu then please go to Authorization and give it permission accordingly......
Regards,
Rahul

Does Seagate Crystal Report Be Integrated with Java Swing

Similar Messages

Maybe you are looking for