Does Weblogic 6.0 SP2 supports libweblogicoxa37.so for Solaris?

Hi:
I can find the libweblogicoxa37.so in the directory of
$WL_HOME/lib/solaris/816_8 but I can't find it in
$WL_HOME/lib/solaris/817_8. Does anybody had used it? When I need to use
jDriver for Oracle/XA in distributed transcation, the share object required
as needed.
Weblogic -- 6.0sp2
Oracle Client -- 8.17
TIA...
Jason

same question here

Similar Messages

  • Does Weblogic Server 5.1 supports RedHat Linux 6.2?

    Hello All,
    Does Weblogic Server 5.1 supports RedHat Linux 6.2?
    Best Regards,
    Samuel Yung
    [email protected]

    FYI.
    I am running RH 6.2 and Weblogic 5.10 with no problems.
    w/Apache 1.3.12
    Only using WL for EJBs and jdbc pool at this time. So your milage may vary.
    Michael Girdley wrote:
    No, not yet. Version 6.0 will.
    The platform support page for WebLogic Server is located at:
    http://www.weblogic.com/platforms/index.html
    This page has the latest and greatest information on the platforms that
    WebLogic is certified and supported on.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Samuel Yung" <[email protected]> wrote in message
    news:[email protected]..
    Hello All,
    Does Weblogic Server 5.1 supports RedHat Linux 6.2?
    Best Regards,
    Samuel Yung
    [email protected]
    /\/\i|<e
    Mike Kincer
    Solutions Developer/Engineer
    Atlas Commerce "ebusiness evolved"
    Office phone: +1-607-741-9988
    mailto:[email protected] [http://www.atlascommerce.com]

  • Does Weblogic Server 5.1 supports RedHat Linux 7?

    Does Weblogic Server 5.1 supports RedHat Linux 7?
    Thanx in advance.

    FYI.
    I am running RH 6.2 and Weblogic 5.10 with no problems.
    w/Apache 1.3.12
    Only using WL for EJBs and jdbc pool at this time. So your milage may vary.
    Michael Girdley wrote:
    No, not yet. Version 6.0 will.
    The platform support page for WebLogic Server is located at:
    http://www.weblogic.com/platforms/index.html
    This page has the latest and greatest information on the platforms that
    WebLogic is certified and supported on.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Samuel Yung" <[email protected]> wrote in message
    news:[email protected]..
    Hello All,
    Does Weblogic Server 5.1 supports RedHat Linux 6.2?
    Best Regards,
    Samuel Yung
    [email protected]
    /\/\i|<e
    Mike Kincer
    Solutions Developer/Engineer
    Atlas Commerce "ebusiness evolved"
    Office phone: +1-607-741-9988
    mailto:[email protected] [http://www.atlascommerce.com]

  • Does XI 3.1 SP2 support Windows Server 2008 Release 2?

    In the supported platforms guide for Business Objects XI 3.1 SP2 it lists support for Windows Server 2008 but I'm curious if it will support 2008 Release 2???

    2012 R2 is not mentioned (that article is over two years old),
    Would be kinda hard to mention a non-existent operating system in a 2 year old blog post, eh?
    Maybe the Blog entry could be updated?
    There's no need to update the blog post once you understand the specifics of the update. The update introduces NEW functionality required for ALL operating systems from Windows 8 forward.
    Also, maybe you shouldn't be so literal in your search efforts? :-) Think outside the box a bit, eh? Understand *why* the update was created. What does the update do that makes WSUS v3 work for Win8/WS2012. Is there some reason that wouldn't work for subsequent
    operating systems? You didn't have the update anyway, did it never cross your mind.. "Hey.. maybe I should do this... anyway?"
    Nevermind the hundreds of conversations in this forum about KB2734608 and the dozens of times Win8.1 or WS2012R2 is mentioned in those conversations.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Does WebLogic Server 8.1 supports ejb2.1(timer service)

    1.does WebLogic Server 8.1(SP5) supports ejb2.1 (timer service)?
    2. does ejb 2.0 support timer service?

    Hi,
    1. No, EJB Timer support was added in WLS 9.0.
    2. No, EJB Timers were introduced in EJB 2.1.
    - Matt

  • Does Oracle (installed in unix) support OS Auth for Windows AD?

    Hi, I've tried setup the Oracle (installed in Windows) support OS Auth for Windows AD.
    But does Oracle (currently I am using 9i) installed in Unix support OS Auth for Windows AD (using LDAP/ Kerberos / etc.)?
    If yes, can anyone tell me how to make it ?
    Thanks!

    Yes.. Oracle support Windows AD authentication using Enterprise User security.
    Please contact me on following if you need more details
    Email: [email protected]
    Ph. 732 404 8364
    We are planning to have EUS presentation for our clients. Please let me know if you are interested to know more on EUS.
    Regards,
    Nishi, CISSP CISA

  • Does Reports 9i comes with a runtime executable for Solaris?

    Does anyone know if Oracle Reports 9i comes with a runtime executable for Solaris that I can just install and call to generate my reports without having to install Oracle 9iAS?

    I dont think you will be able to run reports in Reports 9i without IAS R2. I was told by an Oracle employee that Reports 9i has been ready for some time but that it has not yet been released because it can not function without IAS R2.

  • Does Weblogic server 8.1 support "LIMIT and OFFSET" in EJB QL?

    hi,
    Can any one tell me does 8.1 server support "limit" and "offset" keywords in EJB-QL?
    I tried to define a finder method in the workshop with the following syntax:
    @ejbgen:finder ejb-ql="SELECT OBJECT(o) from EmpBean OFFSET ?1 LIMIT ?2" generate-on="Local" signature="Collection findEmp(java.lang.Integer st,java.lang.Integer en)"
    I get the following error
    ERROR: ERROR: Error from ejbc: [EJB:011017]Error while reading 'META-INF/weblogic-cmp-rdbms-jar.xml'. The error was:
    ERROR: Query:
         EJB Name: EmpBean
         Method Name: findEmp
         Parameter Types: (java.lang.Integer, java.lang.Integer)
    SELECT OBJECT(o) from EmpBean OFFSET =>> 1 <<= LIMIT 2
    EJB QL Parser Error.
    39: unexpected token: 1
    What am I doing wrong?
    thanks

    <p>I could not find any documentation that suggested LIMIT or OFFSET where supported. Some of our developers needed to use limit, in the end all I could suggest was using a dynamic query and setting the maximum number of results see here
    .</p>
    <p>
    Hussein Badakhchani</br>
    </p>

  • Does weblogic 12.1.3 supports EJB 2.0?

    Hi,
    I am trying to migrate from weblogic 8.1 to weblogic 12.1.3.
    We are using EJB 2.0. While deploying the application the EJBs are getting deployed without error but the EJB JNDI names are null.
    Can anyone tell me whether EJB 2.0 is supported by weblogic 12.1.3?

    Yes: As long as there is one server in the cluster still running, the timers will still function,  the application may run slower though. When all servers in the cluster stop, the timers will stop running.  When at least one of the servers in the cluster restarts again, the timers will start running.
    Check: JEE blog: How to use EJB 3 timer in a weblogic 10 cluster environment

  • Does Oracle CRM on Demand support GetMapping method for Web Services Integration???

    I am designing an integration package that will push contacts from my domain to Oracle CRM on demand contacts and vice versa based on mapping saved by users...
    Please send some examples if this is still supported by Oracle CRM...
    Or some alternative for getting the display name and the customfieldId from CRM (Admin)

    AFAIK there is no such mapping available, however you may want to take a look at this Support Community thread that discusses the migration and even gives some samples.
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • Weblogic 6.1 SP2 clustering on Window 2000

    Does Weblogic 6.1 (SP2) clustering work better on Sun Solaris than Windows 2000?
              

    Does Weblogic 6.1 (SP2) clustering work better on Sun Solaris than Windows          2000?
              Yes.
              ... but that's a misleading answer because Weblogic in general works better
              on Sparc/Solaris than on x86/Windows. The clustering implementation is Java,
              so the same code runs on both Windows and Solaris, and works well on each.
              The benefits that Solaris provides are seen primarily in terms of ability to
              handle load more gracefully and in its overall stability -- once you get it
              configured correctly anyway.
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              Clustering Weblogic? You're either using Coherence, or you should be!
              Download a Tangosol Coherence eval today at http://www.tangosol.com/
              "Sam" <[email protected]> wrote in message
              news:3c508b7e$[email protected]..
              

  • Im trying to activate my iphone and it fails saying "the SIM card inserted in this iphone does not appear to be supported". i rang apple they said its vodaphone rang vodaphone they said its apple... someone please help!!!!!!

    my iphone 4s was continually searching for a newtwork my carrier informed me my iphone needed a service or exchange. i drove 2hrs and paid $239 to exchange my iphone. i then went to activate it and i recieve a message saying activation failed. the SIM card inserted in this iphone does not appear to be supported. contact apple for support. i rang apple and they informed me its my sim or the carrier. i rang the carrier and they said its apple. i have also tried activating the phone by using another carriers sim and the same carriers sim from another persons working phone. still get the same message.

    Dude,
    Apple didn't lock the phone, and you'll be waiting until kingdom come of you think that Apple will unlock it. 
    Only the carrier to which a phone is locked can authorize the unlocking.

  • Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?

    Hi All,
    When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
    I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
    otherwise guide me to download page.
    Thanks and Regards
    Arunachalam.C
    Edited by: arungoin on Feb 16, 2011 4:55 PM

    I found by issue "mount -v" that our disk slices are
    UFS type. So we don't need apply patch 5257399,
    right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
    Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
    Your safest bet would be to escalate the request wityh Oracle Support.

  • Weblogic 8.1 SP2 does not support 'Order by' clause in EJB-QL

    It seems that Weblogic 8.1 SP2 does not support 'Order by' clause in EJB-QL. EJB 2.1 spec supports 'Order by' clause in EJB-QL. Am I right when I say that it indicates : "Weblogic 8.1 SP2 does not support EJB 2.1" ? In that case, what can be the alternative since I am using Weblogic 8.1 and I require 'Order by' clause in Ejb-QL as well.

    In WL 8.1 SP4 I can use the ORDERBY just fine.
    Try ORDERBY instead of Order by

  • Does Oracle 8.1.5 with weblogic 6.1 sp2 suppports Distributed Transactions ---A really night Mare

              Which version of jdbc thin driver should i use to achieve distributed transaction
              with oracle 8.1.5 in weblogic 6.1 sp2
              right now if iam using the driver classes provided in weblogic.jar iam gettig the
              following Exception
              AccountBean.ejbCreate( id = accountId, initial balance = $ 3000.0)
              java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
              in the transaction branch start(
              ) failed on resource 'OracleXAPool' Unexpected error during start for XAResource
              'OracleXAPool': null
              at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1044)
              at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1010)
              at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
              at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:226)
              at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
              at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
              at examples.ejb.basic.beanManaged.AccountBean.ejbCreate(Unknown Source)
              at examples.ejb.basic.beanManaged.AccountBean_g1748h_Impl.ejbCreate(AccountBean_g1748h_Impl.java:172)
              at java.lang.reflect.Method.invoke(Native Method)
              at weblogic.ejb20.manager.DBManager.create(DBManager.java:492)
              at weblogic.ejb20.manager.DBManager.remoteCreate(DBManager.java:462)
              at weblogic.ejb20.internal.EntityEJBHome.create(EntityEJBHome.java:190)
              at examples.ejb.basic.beanManaged.AccountBean_g1748h_HomeImpl.create(AccountBean_g1748h_HomeImpl.java:76)
              at examples.ejb.basic.beanManaged.AccountBean_g1748h_HomeImpl_WLSkel.invoke(Unknown
              Source)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:288)
              at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
              at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:257)
              at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:158)
              at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:92)
              at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:112)
              at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:253)
              at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:220)
              at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
              at $Proxy126.create(Unknown Source)
              at examples.wtc.atmi.simpapp.ToupperBean.putMessage(ToupperBean.java:194)
              at examples.wtc.atmi.simpapp.ToupperBean_8roqg7_EOImpl.putMessage(ToupperBean_8roqg7_EOImpl.java:284)
              at examples.wtc.atmi.simpapp.ToupperBean_8roqg7_EOImpl_WLSkel.invoke(Unknown
              Source)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:288)
              at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:257)
              at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              Regards
              Ranga Rao
              

              Oracle Server 8.1.5 does not provide support for 2PC.
              Full XA support is provided from version 8.1.7.
              Sergi
              "Lawrence" <[email protected]> wrote:
              >
              >Ranga,
              >Please use classes12.zip for this.If you still find problem, please let
              >me know.
              >Thanks
              >Lawrence
              >
              >"Ranga Rao" <[email protected]> wrote:
              >>
              >>
              >>Which version of jdbc thin driver should i use to achieve distributed transaction
              >>with oracle 8.1.5 in weblogic 6.1 sp2
              >>
              >>right now if iam using the driver classes provided in weblogic.jar iam
              >gettig
              >>the
              >>following Exception
              >>
              >>////////////////////////////////////////////////////////////////////////////////////////////
              >>AccountBean.ejbCreate( id = accountId, initial balance = $ 3000.0)
              >>java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
              >has
              >>occured
              >>in the transaction branch start(
              >>) failed on resource 'OracleXAPool' Unexpected error during start for XAResource
              >>'OracleXAPool': null
              >> at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1044)
              >> at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1010)
              >> at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
              >> at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:226)
              >> at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
              >> at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
              >> at examples.ejb.basic.beanManaged.AccountBean.ejbCreate(Unknown
              >>Source)
              >> at examples.ejb.basic.beanManaged.AccountBean_g1748h_Impl.ejbCreate(AccountBean_g1748h_Impl.java:172)
              >> at java.lang.reflect.Method.invoke(Native Method)
              >> at weblogic.ejb20.manager.DBManager.create(DBManager.java:492)
              >> at weblogic.ejb20.manager.DBManager.remoteCreate(DBManager.java:462)
              >> at weblogic.ejb20.internal.EntityEJBHome.create(EntityEJBHome.java:190)
              >> at examples.ejb.basic.beanManaged.AccountBean_g1748h_HomeImpl.create(AccountBean_g1748h_HomeImpl.java:76)
              >> at examples.ejb.basic.beanManaged.AccountBean_g1748h_HomeImpl_WLSkel.invoke(Unknown
              >>Source)
              >> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:288)
              >> at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
              >> at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:257)
              >> at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:158)
              >> at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:92)
              >> at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:112)
              >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:253)
              >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:220)
              >> at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
              >> at $Proxy126.create(Unknown Source)
              >> at examples.wtc.atmi.simpapp.ToupperBean.putMessage(ToupperBean.java:194)
              >> at examples.wtc.atmi.simpapp.ToupperBean_8roqg7_EOImpl.putMessage(ToupperBean_8roqg7_EOImpl.java:284)
              >> at examples.wtc.atmi.simpapp.ToupperBean_8roqg7_EOImpl_WLSkel.invoke(Unknown
              >>Source)
              >> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:288)
              >> at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:257)
              >> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
              >> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
              >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              >>/////////////////////////////////////////////////////////////////////////////////
              >>
              >>Regards
              >>Ranga Rao
              >>
              >>
              >
              

Maybe you are looking for

  • Delete Requests (Except Compressed ones) in Cube in Process Chain's Routine

    Hi all,     We load an InfoCube on weekdays and we compress the Month-End load request. My request is to keep the latest SEVEN requests and DELETE all other requests EXCEPT the Compressed requests.  I should not delete the COMPRESSED Requests. I want

  • Function Module to get the TIMESTAMP

    Hi, Is there any function module to get the TIMESTAMP as Outout , if i give input Time and Date. Or, If I go for the concatenate statement.. Do I need to concate the commas in to the target field? Because, I am not getting the proper result with this

  • My playlists are completely out of order...

    How come something as simple as a playlist messes up? I want the songs in my playlists to be in the SAME order as they are on iTunes. Is that too much to ask? How can I fix that problem? BTW: It's a brand new iPod Touch and no, shuffle is not on. Tha

  • Install never completes. Detect partial installation and hangs at 0%

    Good day, I have a brand new Server 2012 R2 box on a Hyper Cluster.  We have attempted to install Exchange 2013 Standard to the machine.  The install had an issue with a failed trust relationship, but we worked that out.  The roles appear to have ins

  • Oracle10.1.0 and gcc3.4.3 ,getString error

    environment: Red Hat Enterprise Linux AS release 4 (Nahant) Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 gcc3.4.3 ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1 compile command is: g++ -o a.out -I/u01/app/oracle/product/10.1.0/db_1/rd