Doing a software update, error occurs with message.

The message is as follows:- "The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance."
Can anyone offer advice on how I can overcome this problem.

Problem solved by simply downloading iTunes and starting afresh.

Similar Messages

I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

See if this helps:
Error "License store does not allow writing" | Install log | CS5, CS5.5

Apple Software Update - Error occures while trying to download

I've been trying all different ways to install the latest version of itunes.
I've tried downloading manually and installing but the installer doesn't launch.
So i've tried to do it using the Apple Software Update, but everytime it comes up with:
'Errors occured while installing updates. If the problem persists, choose tools > download only and try installing manually!
I'm out of options!
Any help?

At least we have some sort of error message from iTunes setup, unfortunately I don't know what it means.
You are logged on as an adminstator are't you, I didn't ask before. Do you have another account you could try installing from?
There are a couple of other things I would like you to try.
Empty Your Windows Temp directory. The following article tells you how towards the bottom of the page under: *Empty your Temp directory and restart*
http://support.apple.com/kb/HT1926
Does that allow the install to go through?
It would be intersting to see if the stand alone QUicktime installer works on your system, I still wonder if you have a more general problem with isntalls.
You can download from the following apge, you want the version WITHOUT iTunes.
http://www.apple.com/quicktime/download/win.html

Software update - error occurred while checking

Hello
When I try and use Software Update it fails to connect.
When I use the preferences and "check now" the bar gets about 1 unit across and then a message box appears : "Failed to check for updates. Make sure you can connect to the internet, then try again."
When OK is clicked the progress bar changes to "Last attempt: Failed: Error occurred while checking".
I know I am connected as I can browse with safari. I followed some tips in other similar situations - deleting a preferences file - but that had no success.
I have been trying for about a day now
Powerbook G4 - 1GHz Mac OS X (10.4.3) 512Mb ddr sdram

Hi Robert, did you determine if this is global or not by creating a new user account? Name it "test" and see how your Sotware Update works in that User acct. (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

Been having problem downloading iPad software update error occurs 2/3 way

Error keeps occuring need help

That's too bad. When you are truly ready for help, try being less vague and provide specifics (such as the exact error) that is occuring.

Im trying to install iMovie 11 but download says I have to be at 10.7.4, when doing a software update I get a message saying there are no updates. Currently running at 10.6.8, any suggestions?

Trying to install iMovie for wife and I am having issues.
iMac is currently at 10.6.8 but iMovie '11 requires 10.7.4, Any suggestions?

more info on iMac
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB

I can't upload photos from iphoto (on my iMac) to facebook. Error message comes up saying 'error occurred with iphoto - try again later'. I've installed the latest software updates but still can't get the photos to upload. Can anyone help please.

Hi, Hope this is in the right place.
I'm trying to upload photos into facebook from my iMac. I've clicked on the upload to facebook icon in iphoto but just get an error message saying 'error occurred with iPhoto - try again later. I've also had problems lately when I click on a photo to open it I just get a grey screen with an exclamation mark. I've downloaded the latest software but nothing seems to work.
Can anyone help please?
Thanks hopefully,
Karen

Karen,
I'd recommend reposting in the iPhoto forum, you can find it at:
https://discussions.apple.com/community/ilife/iphoto

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

I want to make an update to my iphone 4s to ios 5.1 and i cant. it says that error occured with ios 5

I want to make an update to my iphone 4s to ios 5.1 and i cant. it says that error occured with ios 5.1.1 what can i do ?
i change the DNS but nothing happens

Yes it is.
Initially I got an error message saying can't connect because of Date & Time settings.
Went in and re-verified that those were correct.
Tried to update downloads and then got a new error message: "Can't connect to iTunes Store".
I live in the US and that's where I created my iTunes a/d and Apple ID.
I am currently in India --- can that coause confusion re date & time?

While downloading software update for Itunes, getting message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!

While downloading software update for Itunes, got message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!

No promises but a System Reset is worth trying:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

I just did the 10.6.8 update. I'm getting an error An error occurred with an Internet plug-in"

I am trying to prepare to install Mountain Lion. I did the most recent update a few hours ago. Now my MacBook is running very slow & I get an error message "An error occured with an internet plug-in". I can click OK and continue onto the page, but it's every single new page online that I'm getting this error.

Fingers crossed, I might have fixed it. I uninstalled & reinstalled Adobe and so far, so good.

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

Doing a software update, error occurs with message.

Similar Messages

Maybe you are looking for