Don't want Compounding values to display on Report.

Dear All,
I have a Info Object 0SLL_NUMCC - Commodity Code with
two Compounding info object
0SLL_NSCCC - Numbering Scheme for Commodity Code,
0SLL_NUCCC - Country for Commodity Codefinthe Report.
I used this 0SLL_NUMCC Info object in the report and it is showing the compounding values inthe output of the Report.
My client don't want the compounding values to display on the Report.
I tried to restrict the compounding info objects but i am lossing the records in the output of the report.
Is there any solution to display only Commodity Code but not compounding values.
Regards,
srinivas

Hi,
Try to Set No Display in the properties of these 2 chars.
Hope this helps...

Similar Messages

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

Value not displaying in report template

I am attempting to use a template for the first time and am having difficulty when using the following template to format the output of an ApEx 3 report.
All values in the template come from the main table but TRADE comes from a joined table. The output from the report correctly displays the TRADE when run on its own but the value of #TRADE# fails to display when I use the template. Is there something I am missing or should this work?
<tr><td colspan="6"> </td></tr>
<tr><td>Date #CALLDATE#</td><td>&nbsp&nbsp&nbsp&nbsp Client #CLIENT_NAME#</td>
<td>&nbsp&nbsp&nbsp&nbsp JOB #JOB_DESCRIPTION#</td> <td> &nbsp&nbsp&nbsp&nbsp Trade #TRADE#</td>
<td> &nbsp&nbsp&nbsp&nbsp Address #ADDRESS# #TOWN#</td> </tr>
<tr><td colspan="6">___________________________________________________________________________________________________________________________________________________________________________________

Sandy,
It's the first time I have used apex.oracle.com as well so I hope I've done this right.
You did a superb job, thanks a lot. It allowed us to debug the problem, a rather difficult one to isolate as it turned out.
The problem occurs when your report columns' "query column ID" attributes don't match the "column display sequence" attributes. This is apt to happen in queries that use joins and is not a problem in itself. But if you have this situation and also use a named column row template in which you reference column aliases in #ALIAS# format, the wrong value can get substituted. That's what happened in your case.
The workaround until we can fix this is to replace the problem alias reference, e.g., #TRADE# with #13# in the template. I got the value 13 by exporting the page and finding this:wwv_flow_api.create_report_columns (
p_id=> 7496949738101935544 + wwv_flow_api.g_id_offset,
p_region_id=> 7496823660512873188 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 13,
p_form_element_id=> null,
p_column_alias=> 'TRADE',
...You'll need to keep track of this template change in case you rearrange the order of the report columns. We expect to fix this bug in the 3.1 release (no announced date yet).
Thanks again.
Scott

Pie chart value not displaying in report builder

Hi,
I created a report by using report builder i used a pie chart in my report but one value is showing other one is not showing. Kindly tell me what is the problem behind it?
here is an image which is not displaying 1 value in pie chart. please help me

Hi Aamir,
Please check if there is any misconfiguration (e.g. show data label, formatting, etc.) for your chart slice per the following post.
http://social.technet.microsoft.com/Forums/en-US/ebc3bfc5-6338-4946-ade6-64e89611f6b7/ssrs-report-builder-30-pie-chart?forum=sqldatawarehousing
http://msdn.microsoft.com/en-us/library/dd220469.aspx
Further more, you can post this topic in SQL server forum for a better assistance.
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices%2Csqldatawarehousing%2Csqlanalysisservices&filter=alltypes&sort=lastpostdesc
Thanks
Daniel Yang
TechNet Community Support

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

Call Display Picture Always Full Screen (I don't want that)

There are a few discussions about this, but they all seem to be over 4 years old, and I still have the problem. (Please read the whole explanation, as I've tried several fixes already)
I am extremelly picky with my computer and phone "stuff". Ever since I've owned my iPhone I've made it a point to add a picture to every contact I have.
Early in my iPhone ownership I realized that if you add a picture directly from your iPhone (wether is taking it directly from the iPhone cam while adding the contact or choosing from the library) such picture shows FULL screen when I call that person or when that person calls me. If I simply open Address Book in my Mac and "drag" a picture (say for instance from Facebook) into the picture section of that contact and then synch, then when I make or receive a call from that person it shows small and I still see my wallpaper on the background.
Well THAT's what I want (just like in the Appple commercials), I DON'T want the full screen picture.
Now here's THE PROBLEM;
For some reason NOW, I STILL add pictures the SAME WAY (I go into Facebook, and drag the picture into Address Book) but when I make or receive a call from that person the display picture ALWAYS shows full screen!! It's annoying the heck out of me!!
The ONLY thing different is that now my contact are synched thru iCloud as opposed to synching using a USB cable in iTunes, HOWEVER, SOME contacts show how they are supposed to show (even adding them thru iCloud), but MOST others don't! I feel I should add that ALL contacts I had BEFORE I strated synching with iCloud still show fine, the ones that have a problem are MOST (but not all) of the ones I added AFTER I started synching thru iCloud. And the fact that a few worked fine leads me to believe there's got to be a way of making them all show small.
Anyone has any idea of how to keep them ALL the same?

OK, that's interesting. Now, how do I get all of my contact photos into iPhoto? And do I have to do this one contact at a time, or is there a setting where I can "import all". Furthermore, once all photos are in iPhoto and I select "Import Face from iPhoto" can I do such actions for all contacts at once or do I have to do them one at a time?

I don't want my Skype name to be displayed when I ...

Instead is there a way that when I call my company name is displayed. I also don't want any number to be displayed.

I assume Apple got their data from somewhere like the NHS (or american health board equivalent). Hopefully as nick101 says, it will become customisable in future Apple Watch updates.
On the NHS website, this is stated as the recommended activity time for adults aged 19-64:
One way to do your recommended 150 minutes of weekly physical activity is to do 30 minutes on 5 days a week.
All adults should also break up long periods of sitting with light activity. Find out why sitting is bad for your health.
What counts as moderate-intensity aerobic activity?
Examples of activities that require moderate effort for most people include:
walking fast
water aerobics
riding a bike on level ground or with few hills
doubles tennis
pushing a lawn mower
hiking
skateboarding
rollerblading
volleyball
basketball

Disable / Hide Portal PCD roles which we don't want to display in UME.

Hi Friends,
I have configured ESS/MSS setup in our Portal;
Step 1)
    a) We downloaded ESS/MSS business packages from SAP Market place
    b) Deployed into our Portal.
    c) I have checked in Portal Content Administration; ESS/MSS PCD objects i.e. Roles,Worksets,Pages and iViews were created inside the SAP Standard folder.
Step 2) As per my client recommendations u2013
   a) We donu2019t want to use PCD objects directly from SAP Standard folder and we will keep those PCD objects as backup. So,
   b) We created Client folder ex: xxABC inside Portal Content.
   c) I copied ESS/MSS PCD folder from SAP Standard Folder and Pasted inside folder xxABC; and then we customized Roles and worksets based on our requirements.
Step 3) Role assignment to Users
      When I search for ESS/MSS roles like u201CEmployee Self-Serviceu201D and u201CManage Self-Serviceu201D I am able to see each role twice u2013 one is from SAP Standard folder and another from client folder which I was copied.
So,
1) I donu2019t want to display ESS/MSS role which is inside of SAP Standard folder in UME(role search).
2) I donu2019t want to delete the role from this folder.
I got an Idea that is u2013 disable/hide Portal PCD roles which we don't want to display in UME while role search.
Please advise me, Is there any feature to disable/hide PCD roles in SAP Portal?

Hi,
You can try to set '''plugins.hide_infobar_for_outdated_plugin''' to true in [http://kb.mozillazine.org/About:config about:config].
[http://kb.mozillazine.org/About:config_entries about:config Entries]

Don't want display the archive partners in Interaction Center Winclient

Hi All,
While searching for the business partners in the Interaction Center Winclient ( Transaction Code : CIC0), we don't want to display the archived business partners . Please provide your valuable suggestions.
Thanks in advance.

Hello,
the only standard way can be seen in note 813540.
In CIC0, when you select for business partner and "Select related
business partner screen" appears for this BP, there is a list of icons
below this screen. There should be also "Change layout" button (
between "print" and "Choose layout" buttons). When you click on the
button "Change layout", you may choose additional fields as described
in the Note. I saw this fields (hidden) in your systems, so the Note is
implemented already. Add these fields from 'hidden' section to 'Line 1'
section. Click 'copy' button and fields should be there finally
visible. I hope it helps you a little bit.
Regards, Gerhard

HT2500 how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise.

how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise. thank you.

Attach it to the message. An attachment is an attachment -- if it is displayed or not by the recipient's e-mail client is not under your control.
You can zip it (compress it) before sending it; if it's text, you should zip it anyway; if it's JPEG, zipping will not reduce the size (in fact, it's even possible it may increase it slightly), but most e-mail clients do not display what's inside a zip archive.

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

How to get rid of compound value in hierarchy

Hello,
I want to use hierarchy of cost centers in bex report.
I don't want to see the compound value 1000 (controlling area) as part of the keys.
For example, instead of -
1000IS3
     1300
     1400
I want to see -
IS3
     1300
     1400
1300 and 1400 are the cost centers and IS3 in a higher level.
Is it possible?
Thank you,
Hadar

Hadar,
Add a drilldown by Controlling Area to your report, then set it's properties to 'No Display'. That should give you the desired results.
Hope this helps...
Bob

Oracle states go to OTN for this:If the criteria isn't met I don't want for

Can you easily recover from, bypass or work around the problem? = YES
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Did it work before? If yes, what have you changed? ###
No, We were told this was fixed with 10G so we upgraded to 10G. We have a
report and we want it to execute if it's less than 10 records if not we want a
message to come up that the report needs to be scheduled.
Well we run the report and it displays exceeded record count but the format
still runs so no time saved on the web.
If the record count was exceeded we want to HALT the system and not go any
farther.
Now if we could modify the system message 1825 we would be o.k. But we don't
know if that is going to work. If we could change the message we would be
o.k. with that. that would mean changing the system codes though.
### How is the Report being called (Command line, URL or via Oracle Forms): ###
If false comes back in the beginning then we don't want any report formatting
to be done. Right now the format is done it seems but no data is displayed
because criteria isn't met.
So we dont wnat the formatting to be run when criteria isn't met. But for
some
reason it still runs and takes time.
See we have some reports on the web that can only be ran by date range right
now the clients can only run the reports for a 6 months range.. Well some
clients have a lot smaller record count. So we want to change the way the
reports are ran to a records count. If the count is large than said amount
then a message comes up that states the report has to be scheduled. If the
amount is under said amount then the report runs.
So at this time in the report we do a count then we move onto will the report
run or not if over the amount we want to abort the process but we don't want
the client to see the abort. We definately don't want the client to sit and
wait for the format to run when NO Data is to be returned.
### Error messages and error scenario: ###
So what we want is too see a message "Schedule the report count exceeded" and
NO formatting done. If under amount we want the report to run.
### Provide a detailed step-by-step description of your problem or question: ###
Or is there a way to customize the messages the client / users will see. And
no formatting time for no records returned.
Contact me via : E-mail -> [email protected]
Text continued in next action...
20-SEP-04 18:39:53 GMT
Text continued from previous action...
20-SEP-04 19:18:51 GMT
New info : Is there a way if the error messages have to come up that we can
hide the message or have another screen cover that error message something to
cover the message so that the user doesn't see the error message.
20-SEP-04 19:30:23 GMT
Hi Darlene,
Thank you for using MetaLink. Iam currently working on a very critical issue.I shall review/research your issue at the earliest opportunity and w
ill update the SR / call you as soon as we have relevant information. Thank you
for your patience.
Best Regards,
Seema,
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
20-SEP-04 19:30:30 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 00:32:18 GMT
Hi Darlene!
If you are calling the report from a form, try using the EXIT_FORM line in your code.
Thanks and Regards,
Seema
21-SEP-04 00:33:01 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 14:09:20 GMT
New info : We will try it and let you know.
21-SEP-04 14:19:04 GMT
New info : We are not calling the report from a form so this won't work. Any
other way. We are needing to do this badly.
21-SEP-04 14:39:06 GMT
New info : Can I get detailed steps about how to customize the system message
or hide the message when we abort the report?
21-SEP-04 15:38:39 GMT
Hi Darlene!!
As talked to you on phone, here are the steps for you to try.
The below has been run as a test case using emp table in scott schema of a database
1) create a summary coloumn say cs_1 in the data model.
2) point the function to count.
3) Point the source to what ever's count you want it to be pointed to(say empno of emp table of
scott schema)
4) create a user parameter say NO_ROWS
5) in its property palette make its data type number and initial value as 1
6) I had teh following query for my report:
select empno, ename from emp
where rownum <= :no_rows
This means that the report that will be generated will consist of a total no of NO_ROWS(that we
shall be specifying at run time). The before report trigger(mentioned in 7 below) shall assure
that whenever we specify NO_ROWS greater than 5 then the report will display a customized pop up
message.
7) create a before report trigger as:
function BeforeReport return boolean is
user_excp EXCEPTION;
begin
if :cs_1 >5 then
raise user_excp;
return (false);
else
return true;
end if;
EXCEPTION
WHEN user_excp then
SRW.MESSAGE(30, 'Data is more please schedule this report:');
raise SRW.PROGRAM_ABORT;
return (false);
end;
This way when u run a report, an argument is asked whether how many rows do you want to be
displayed as in the parameter NO_ROWS. then you specify the number. If that number is greater
than 5(in this case, due to if :cs_1 > 5 then....) then it will pop up a message saying "Data is
more please schedule this report:"
In case you do not want to specify NO_ROWS..then you need not put that and modify the report
query as "select empno, empname from emp;" i.e. without where clause.
21-SEP-04 16:49:30 GMT
New info : we will try this then update the TAR.
21-SEP-04 16:58:09 GMT
ok you update the tar when you try the above steps.
STATUS:
@CUS
23-SEP-04 02:16:00 GMT
New info : Information from the person that did this suggestion step by step.
I tried this step by step, but unfortunately, it doesn't work the way we want.
First with this suggestion, the user needs to choose how many records they
want
to get, or we default a number of records, in order to run the report. The most
important thing is, whenever you specify the statement return false or raise
SRW.PROGRAM_ABORT in the before report trigger, the system message will pop up.
I really hope that people from Oracle would let us know how to customize the
system message or hide it.
23-SEP-04 14:23:04 GMT
New info : I just thought that we have some sort of message, which I guess is
from the database, when we do claim search on client inquiry. I am just
wondering if we could try the same thing to the report.
The some sort of message looks like this on dev box:
Your search exceeded 5000 records and will surpass the capabilities of this
connection. Please narrow the search criteria and resubmit.
It's just a thought, not sure if it's going to work.
When could we have the DBA Make this change. The servlet.properties???
23-SEP-04 17:30:55 GMT
REQUESTED INFORMATION PROVIDED
===============================
Hi Darlene,
Thank you for providing the requested information. I am currently reviewing/resea
rching the situation and will update the TAR / call you as soon as I have additi
onal information. Thank you for your patience.
Best regards,
Ajit
STATUS
=======
@WIP -- Work In Progress
23-SEP-04 18:04:31 GMT
UPDATE
=======
Hi Darlene,
We cannot modify the system messages nor do I think there is a method to hide the system message. The message that was coming is
due to the raise srw.program_abort command, which is the element through which
we can abort the program.
Thanks
Best Regards
Ajit
@CUS
23-SEP-04 18:29:26 GMT
New info : Can you please look into a way that we can get something to work?
23-SEP-04 18:49:28 GMT
Hi Darlene,
I am sorry to say that but I don't think there is any any workaround to this because the system message is what is generated by the oracle reports i
nternally. Still if you wish you may refer to the otn discussion forum which is
maintained by teh product management group and post a new thread on it. the link
to the forum is Reports
Also since nothing can be done on our side I don't see any reason to keep this TAR open an
d if you wish we can soft close this.
Thanks
Regards
Ajit.
23-SEP-04 13:13:10 : CHANGES MADE VIA MetaLink
NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
New info : Shouldn't there always be a way to do something? I don't understand
why we were told in 10G that this could be done and now we are told it can't.

You can tell Thunderbird to remember your password.
''... they took me off their list because they kept receiving error messages when they sent me a message.''
What is the exact error message?

How can I make a weekly 'to do' list? I don't want the list associated with a particular date and time; just a list of things to get done!

How can I make a weekly 'to do' list? I don't want it associated with a particular day or or time, just the week, preferably with the ability to check off or remove when done.

Thank you for the excellent reference Peddi. I had played with the OAMessageChoiceBean component yesterday, but I was able to tell from your instructions that "Picklist Display Attribute" and "Picklist Value Attribute" really are not for binding to the database EO. That was the key piece of information that had me confused.
In addition to adding the messageChoice component to the page, I needed to write some code to synchronize the picklist value with the corresponding code value, which I placed in am OAFormValueBean (hidden form field) which I could then bind to my application's database EO in the controller, running in the processFormRequest procedure:
/** Synchronize the catalog code with the selected catalog name */
protected void syncCatalogValues(OAPageContext pageContext,
OAWebBean webBean, MyApplicationAMImpl am) {
OAMessageChoiceBean mcb =
(OAMessageChoiceBean) webBean.findChildRecursive("CatalogName");
OAFormValueBean cc =
(OAFormValueBean) webBean.findChildRecursive("CatalogCode");
String catalogDescription = mcb.getText(pageContext);
if (catalogDescription != null) {
String catalogCode = am.getCatalogCode(catalogDescription);
cc.setValue(pageContext, catalogCode);
Along with a little code to get the catalogCode value from the LOVVO, that's all it took.
Thanks again. This was a great help.
Pete

Missing return statement, yet I don't want anything printed.

Here is what I have coded for quizSet
public boolean quizSet(int no, int score)
 while ((score > 10 || score < 0))
 if (no == 1)
 quiz1 = score;
 else
 quiz2 = score;
}Basically I get an error saying I am missing a return statement, yet I don't want any text displayed or returned. I just want it to set the values of quiz1 or quiz2 to the appropriate score. However I don't think I am using the boolean correctly (No true/ false?), but I am supposed to use it.

Thanks for the reply.
Hmm yea getting late, overlooking stupid things :(
Anyway looking at that again, I seem to have really messed up that loop. What I want it to do is set the value of a quiz to the resulting score if that score is between 0 and 10. Then if it is between 0 and 10 it checks to see what quiz # it had been. If it is quiz number 1 it sets quiz1 to the value that was entered. But it doesn't print anything, just sets an int to a given value.
I wrote some code that had the loop working correctly but it wasn't what I was assigned to do.
System.out.println("Enter score for quiz 1:");
 quiz1 = keyboard.nextInt();
 while((quiz1 > 10 || quiz1 < 0))
 System.out.println("Enter score for quiz 1:");
 quiz1 = keyboard.nextInt();
 }Basically I need to convert this into a:
public boolean quizSet(int no, int score)which will work in the class I am trying to create.

Don't want Compounding values to display on Report.

Similar Messages

Maybe you are looking for